STOP LINE by f3j9He

VIEWS: 6 PAGES: 16

									                          MEASUREMENTS TO BUILD STOP
                              LINE AND SET UP
                                  SIGN NEED TO BE 1 FOOT BY 2 FEET OR LARGER



                                                  STOP

SIGN IS PLACED 6 FEET TO THE LEFT OF STOP LINE



                                                           <-- POST IS MADE OUT OFF 2 INCH PIPE 4 FEET
                                                               LONG WELDED TO BASE IN THE CENTER
                                                               MARKED WITH A (X)

                                                    BASE

                        3 INCH FLAT PLAT 1/8 THICK PAINTED WHITE


                                                                    BASE IS MADE OUT OF 3" WIDE
                                                                    FLAT PLATE 1/8 THICK 16"X16'




                                                                    2 - PIECES 16 INCHES LONG
                                                                    3 - PIECES 10 INCHES LONG
MEASUREMENTS TO BUILD CURB LINE
        AND SET UP

         PARKING CONE -->             FRONT


         8 FEET BETWEEN ROPE AND PARKING CONE




              CURB OR ROPE MUST BE USED
         STALL IS 2 1/2 TIMES LENGTH OF BUS-->




             8 FEET BETWEEN ROPE AND PARKING CONE
         PARKING CONE-->
            MEASUREMENTS TO BUILD PARALLEL PARKING
           NEEDS TWO SET OF STANDARDS (1 FRONT STANDARD AND 1 BACK STANDARD)




                                               <-- 3/4 INCH RIDIG CONDUIT 12 INCHS LONG
                                               WELDED TO BASE IN LOCATION MARKED WITH X


    BASE                                            NEED 4 BASES
MADE OUT OF 3 INCH FLAT METAL 1/8 THICK
3 - PIECES 10 INCHS LONG
2 - PIECES 16 INCHS LONG




                                          1" PVC PIPE 8 FEET LONG
                                          NEED TWO 8 FOOT PIPES


               1" T        <-- CUT T IN HALF ACROSS TOP TO MAKE A U SHAPE TO 8 FOOT PIPE
                                NEED 4 T'S CUT IN HALF
                                GLUE T'S TO 3 FOOT PIPE TO MAKE STANDARD




                           NEED 4
                      <-- 1 INCH PVC PIPE 3 FEET LONG




                                               NEED 1 YELLOW ROPE 46 FEET LONG



               BASE




                                 SET UP FOR PARALLEL PARKING
STANDARD-->                      8 FOOT PIPE                    <-- STANDARD
                                 FRONT STANDARD




              YELLOW ROPE OR CURB MUST BE USED-------------->


                       STALL LENGTH IS
                       TRANSITS LENGTH PLUS 6 FEET
                       CONVENTIONAL LENGTH PLUS 7 FEET




STANDARD-->                      8 FOOT PIPE                    <-- STANDARD
                                 BACK STANDARD
         MEASUREMENTS TO BUILD RIGHT TURN EVENT
                       AND SET UP
                                                        < --MATT


    ARC OF CURB MINIMUM OF 26 FEET
                                                                                   <-- CURB EDGE
                             <-- CURB EDGE IS MARKED WITH PARKING CONES LAID DOWN



                                        X PULL STRING FROM EQUAL MEASUREMENTS CENTER POINT TO
                                       CURB EDGE THIS HELPS TO LINE UP MATTS WITH CENTER LINE POINT
        <36">
        <- MATT




                                                             RIGHT TURN
                  <--CURB EDGE



50' YELLOW ROPE          BASE IS MADE OUT OF 3" WIDE                      <-1 INCH SQ. TUBING OR PIPE 4 FEET
USED FOR CURB            FLAT PLATE 1/8 THICK 16"X16'                           LONG WELDED TO CENTER OF
STARTING AT                                                                   BASE MARKED WITH X
PARKING CONES
                                                                              MARKED WITH X



                         2 - PIECES 16 INCHES LONG                 BASE
                         3 - PIECES 10 INCHES LONG


    WHITE - 20 DEMERITS      < -- 3 INCH WIDE
    BLACK - 10 DEMERITS      < -- 3 INCH WIDE
    WHITE - 0 DEMERITS       < -- 6 INCH WIDE

MEASUREMENTS FOR MATT ARE 12 INCHES X 36 INCHES
MATT IS PLACED 36 INCHES FROM CURB WITH THE 0 DEMERITS TOWARD CURB
MEASUREMENTS TO BUILD DIMINISHING CLEARANCE




 1" 90      1 FOOT PIPE          <-- RUBBER TIP


                                                                UP RIGHT PIPE FOR STAND
                                                  3/4 INCH CONDUIT PIPE 12 INCHES LONG-->
     <-- STANDARD
     <-- 3 FOOT PIPE




                                                                               BASE PLATE




                                    BASE PLATE
                       BASE PLATE IN MADE OUT OF 3 INCH FLAT PLAT 1/8 INCH THICK
                       3 - PIECES 10 INCHES LONG
                       2 - PIECES 16 INCHES LONG
                       1 - PIECES 0F 3/4 INCH CONDUIT 12 INCHES LONG WELDED IN PLACE MARK BY X




 STANDARDS ARE MADE OUT OF SCH 40 1 INCH PVC PIPE

 10 - PIECES 3 FEET LONG
 10 - PIECES 1 FOOT LONG
 10 - 1 INCH 90'S
 10 - RUBBER TIPS
 GLUE PIPE TO 90'S TO MAKE STANDARDS




             SET UP FOR DIMINISHING CLEARANCE
                    90   PIPE      <BUS WIDTH PLUS 2">                     90




               90                  <BUS WIDTH PLUS 4">                          90




          90                       < BUS WIDTH PLUS 6">                              90



                                             <--- STRING FOR CENTER LINE



     90                            <BUS WIDTH PLUS 8">                                    90




90                                 <BUS WIDTH PLUS 10">                                        90




          5 STANDARDS IN A 100 FEET DISTANCE (EACH STANDARD IS 25 FEET APART)
          MEASUREMENTS TO BUILD STRAIGHT LINE
                    AND SET UP
    YOU NEED 10 TENNIS BALLS AND STRING ABOUT 12 INCHES LONG TO ATTACH TENNIS BALL TO HOSE
    YOU NEED 10 PIECES OF 2 INCH RADIATOR HOSE CUT IN 2 INCH LENGTHS
    THE TENNIS BALLS ARE PLACED IN A 100 FOOT LENGTH COURSE EVERY 25 FEET APART
    YOU NEED TO MEASURE THE WIDEST POINT ON REAR DUALS AND ADD 3 INCHES TO IT
    THIS GIVES YOU THE MEASUREMENTS FOR THE WIDTH BETWEEN TENNIS BALLS



                        <DUAL PLUS 3">
                    >




TENNIS BALL PLACED EVERY 25 FEET         <--- SMALL ROPE TO LINE TENNIS BALLS UP STRAIGHT
         25 FEET APPART
                    <
         MEASUREMENTS TO BUILD OFFSET ALLEY
   YOU WILL NEED 4 BARRIERS 10 FEET LONG
   LIST OF SUPPLIES PER BARRIER              5 - 1" SCH 40 PVC PIPE 24 INCHES LONG
   8 - 1" SCH 40 PVC PIPE T'S                3 - 1" SCH 40 PVC PIPE 19 INCHES LONG
   2 - 1" SCH 40 PVC 4 WAY T'S               YOU WILL NEED TO GLUE ALL T'S AND 90 TO PIPE
   8 - 1" SCH 40 PVC PIPE 28 INCHES LONG     DO NOT GLUE THE 2" LONG PIPE TO THE T'S THEY HAVE TO SWIVEL
    L                                               L




   T           28"          T          28"       4 WAY T          28"         T           28"          T
   24"




                           24"




                                                   24"




                                                                             24"




                                                                                                           24"
   T           28"          T          28"       4 WAY T          28"         T           28"              T




   19"                                             19"                                                 19"

            OUT RIGGER FOR TOP OF BARRIERS
         YOU WILL NEED 9-1O" AND 3-15"LONG
          L



  LIST OF SUPPLIES FOR OUT RIGGERS
  12 - 1" PVC 90
  12 - 1" PVC PIPE TWO INCHES LONG (ONE END SAND TO FIT INTO TOP T'S)
  9 - 1" PVC PIPE 10" LONG
  3 - 1" PVC PIPE 15" LONG
  12 - RUBBER CAP FOR END
                                                    STANDS FOR BARRICADES
                                                                     YOU WILL NEED 12 PIECES OF 3/4" RIGID
                                                                      CONDUIT 12 INCH LONG FOR UP RIGHT
YOU WILL NEED 12 BASE                                                WELDED TO BASE MARKED WITH THE X
FOR OFFSET ALLEY

                                                           BASE

EACH BASE 16"X16" MADE OUT OF 3 INCH FLAT METAL 1/8" THICK
2 PIECES 16" LONG
3 PIECES 10" LONG



                                 SET UP FOR OFFSET ALLEY
          < 10 FEET BETWEEN >                   <-- 2ND. BARRIER
              TIPS




                     POINT B-->




DISTANCE BETWEEN POINT A
AND POINT B IS THE LENGTH
OF BUS PLUS 3 FEET
                                  <-- ROPE FOR LINING UP STANDARD TIP FROM 1ST STANDARD TO 2ND ONE
                                       THIS LAYOUT IS FOR A LEFT HAND OFFSET




                                  <-- POINT A




1ST BARRIER-->




                 BUS TRAVELS THROUGH 1ST BARRIER AND STEERS INTO 2ND BARRIER
                        MEASUREMENTS TO BUILD BACK UP ALLEY
RED FLAG 6"X24" THIN SHEET METAL
                        <-- measurement -->
                           to flag is 10"

                                                     <------- TOP TUBING 3/4 " THIN WALL SQ. TUBING
                                                                         TOP TUBING 24" LONG                           NEED 2- 1 1/2 PVC PIPE 5 FEET LONG
                                                                                                                       PLACED OVER FRONT UPRIGHT BASES

  FLAG BOLTED WITH 1/4" BOLTS TO                                                                                          1 1/2 PPVC PIPE 5 FEET LONG
  TOP TUBING FROM OUTSIDE
  OF FLAG

                                                     <--------UP RIGHT 3/4" THIN WALL SQ. TUBING
                                                                  36" LONG WELDED TO TOP TUBING
  FLAG ON THE RIGHT SIDE                                          TO MAKE A 90 DEGREE
  IS 42" FROM GROUND
  UP TO BOTTOM OF FLAG
                                                                                                                   NEED TWO UPRIGHTS FOR FRONT OF THE STALL
  FLAG ON LEFT SIDE                                                                                         <----- UPRIGHT 2 FOOT LONG
  IS 46" FROM GROUND                                                                                               PIPE WELDED TO EDGE OF BASE
  UP TO BOTTOM OF FLAG                                                                                             MARKED BELOW BY X IN LOCATION



          1/4" NUT FOR SET SCREW--->
                                                                                                            BASE

                                                                                        2 BASES 16"x16" made out of 1/8" x 3" flat metal




                                                                                                                             UPRIGHT WELDED TO EDGE
                                                                                                                             OF BASE MARKED BY +
                                                                                                                             3 PEICES10" LONG
UPRIGHT 1" THIN WALL SQ. TUBING--->                                                                                          2PEICES 16" LONG
  28" LONG WELDED TO BASE CENTER


TWO STANDS NEEDED FOR BACK UP
ALLEY ONE FOR LEFT AND ONE FOR RIGHT
SIDE AT THE BACK OF ALLEY
                                                           <---- CENTER BAR HOLDER 1" SQ. TUBING
                                                              Center bar holder 3" long with a 1/4 "
                                                              nut weld in the center for set screw




  16"x16" base made out of 1/8" x 3" flat metal



                                              CENTER BAR IS 56" LONG MADE OUT OF 3/4" THIN WALL SQ. TUBING WITH A PIECE OF 1" SQ. TUBING
                                              WELDED IN THE CENTER (POINTED DOWN) TO PLACE THE BAR FOR MEASURING STALL CENTER BAR HOLDER



                                                  1/4 " NUT FOR SET SCREW

                                                           NEED 2 CENTER BAR HOLDER


  UPRIGHT WELDED TO CENTER              STALL CENTER BAR HOLDER FOR BACK END OF STALL                  STALL CENTER BAR HOLDER FOR FRONT END OF STALL
  OF BASE MARKED BY +                   1 PIECES 3/4" TUBING 8" LONG                                   2 PIECES 3/4 " TUBING 8 " LONG
  3 PIECES10" LONG                      1 PIECE OF 1" TUBING 3" LONG                                   1 PIECE 3/4" SQ. TUBING 12" LONG
  2 PIECES 16" LONG                     BOTH PIECES WELDED TO MAKE L SHAPE                             1 PIECE 1 " SQ. TUBING 3" LONG WITH

                    5 0 4 0 3 0 2 0 1 0              1 foot free zone     5     1 0 1 5 2 0 2 5 3 0 3 5 4 0 4 5 5 0
     Back of Stall                                      STALL CENTER LINE BAR 10 FT. LONG 3/4" SQ. TUBING                                    Front of Stall
     One foot free zone is marked between 4 and 5 feet from the back of stall
     demerits mark off each 6" behind and in front of free zone
                       SET UP FOR
                      LAY OUT TO BACK UP ALLEY
                                             BACK OF STALL
            BACK RIGHT STAND                                                                          BACK LEFT STAND
                                             CENTER BAR WITH CENTER LINE HOLDER




                                                                  <--- CENTER LINE BAR


                                                                                  Note:
                                                                                  Center line is placed between
                                                                                  the 2 side ropes of the stall




<-- 40 FOOT YELLOW ROPE                                                                            40 FOOT YELLOW ROPE--->

                                                       FRONT CENTER
                                                       LINE BAR
                                                       HOLDER




FRONT STAND                                                                                                 FRONT STAND
WITH 5 FOOT PIPE                                                                                            WITH 5 FOOT PIPE

                                                     FRONT OF STALL




  1- LIMITATION LINE (50 FOOT YELLOW ROPE START AT LEFT SIDE OF STALL TO PASS RIGHT SIDE)
           TRANSIT BUS LENGTH PLUS I FOOT
           CONVENTIONAL BUS LENGTH PLUS 4 FEET
                                                    Measurements to Build Railroad Crossing

                     4 feet long painted white
4 - cross brackets




                                                                                                                   <-- two rails 10 feet long
                                                                                                                                                <--- painted black
RAILS AND BRACKETS MADE OUT OF 3 INCH WIDE FLAT METAL 1/8" THICK
BOLT THE RAILS TO CROSS BRACKET IN THE LOCATION MARKED WITH A WHITE +
INSIDE MEASUREMENT BETWEEN THE RAIL IS 3 FEET



                                                                <--- cross bars made out of 3 inch flat metal 1/8" thick - 24 inches long
                                                                         cross bars painted white with railroad crossing on them (2" letters)
                                                                         bolted to a 1 inch sq. tubing or pipe 4 feet long welded center of base

                                                                         base is 16"x16"




                                                                         3 pieces 10" long
                                                                         2 pieces 16" long

                                                        <-- railroad crossing sign

                                                 base
Set Up for Railroad Crossing

                               <-- 15 foot mark past track




                               <-- 15 foot mark before track




                               < --crossing sign before track




                               < --50 foot mark before track
               MEASUREMENTS TO BUILD STUDENT LOADING
                      STUDENT                <-- STUDENT SIGN IS 1 FOOT X 8 INCHES THIN SHEET METAL PAINTED
                                                  WHITE AND BOLTED TO POST




                               <-- POST IS 1" SQ. TUBING OR PIPE 4 FEET LONG WELDED TO CENTER OF BASE




                        BASE




              BASE 16"X16" MADE OUT OF 3 INCH FLAT METAL 1/8" THICK
              2 PIECES 16" LONG
              3 PIECES 10" LONG



    ONE YELLOW ROPE 100 FEET LONG FOR ROAD EDGE OR CURB WILL MARK LOADING AREA



    ONE SMALL STRING MARKED AT 10' AND 15' FOR MEASURING BACK FROM STUDENT
    STRING IS PLACED AT THE STUDENT AND PULLED TO DOOR CENTER FOR MEASURMENTS


BUS NEEDS TO STOP 6 FEET AWAY FROM STUDENT WITH STUDENT TO RIGHT SIDE OF BUS
SIX FEET AWAY FROM STUDENT IS IN THE RECERTIFICATION COURSE (CH.3.10 LINE #7)
BUS ALSO NEEDS TO STOP 10 TO 15 FEET BACK FROM STUDENT. MEASUREMENT IS TAKEN FROM CENTER OF DOOR
STUDENT LOCATION AWAY FROM CURB LINE WILL BE DETERMINED ON DAY OF COMPETITION


                                    SET UP FOR STUDENT LOADING
      STUDENT LOCATION AWAY FROM CURB LINE WILL BE DETERMINED ON DAY OF COMPETITION
                                            student
                                                            sign



                                                              <-- small string to be pulled in order to measure
                                                                    distance to the center of the door
                                                              This string is pulled equal distance from the curb line




                                                              <-- 10 foot mark


                                                              <-- SMALL STRING FOR MEASUREMENT FROM DOOR TO STUDENT

                     DOOR          <---- 6 feet min.---->           TO MEASURE FOR THE SIX FEET TO THE SIDE OF STUDENT

SCHOOL BUS->                                                  <-- 15 foot mark
BUS




100 foot yellow rope or curb -->

								
To top