TyPE 1 HOSE ASSEMBLIES

Document Sample
TyPE 1 HOSE ASSEMBLIES Powered By Docstoc
					                                                 TyPE 1 HOSE ASSEMBLIES
                                           CSA approved to CGA standards 8.1 or 8.3.
       used for the transfer of Natural gas in a vapor state and Propane in a vapor or liquid state up to 350 PSI.


                                                          Part Numbering Legend
                                                                      ENd FITTINg COdE dESCrIPTIONS                hOSE Id & FITTINg SIZE CharT
       BrEaKdOWN:
       I   12    C 72 mP 12 mP 12                               mP           Male Pipe                             4        =         1/4”
       1   2      3     4      5       6     7      8           FS           Female S.A.E. Flare Swivel
                                                                                                                   5        =         5/16”
                                                                QCC          Female QCC1
                                                                POl          Male POL                              6        =         3/8”
       1    Hose Type: I = Type One Hose
                                                                mI           Male Inverted Flare                   8        =         1/2”
       2    Hose I.D. in 16th of an inch: 12 = 3/4” I.D. Hose   FW           Female LH 9/16-18 Welding Fitting
                                                                                                                   10       =         5/8”
                                                                POlhW        POL with Hand Wheel
       3    Fitting Connection & Hose Material: C = Crimped                                                        12       =         3/4”
                                                                mC           Male #20
       4    Overall Length in Inches                            FC           Female #20                            16       =         1”
                                                                POlNE        Male POL with Excess Flow             20       =         1-1/4”
       5    Hose End Fitting Code #1: Male Pipe (MP)
       6    Hose End Fitting Size #1: 12 = 3/4”                     FITTINg CONNECTION & hOSE maTErIal             24       =         1-1/2”
                                                                                                                   32       =         2”
       7    Hose End Fitting Code #2: Male Pipe (MP)            C            Crimped
       8    Hose End Fitting Size #2: 12 = 3/4”                 T            Thermoplastic




Type 1 hose assemblies are available in 1/4”, 3/8”, 1/2” & 3/4” I.d. inch increment lengths of inches.




                                                                                                                                                        HOSE & TUBING
                                                                                                           Example Part Number
Visual representation of hose Ends                                   Ends Type
                                                                                                   (see legend above for ordering options)

                                                                     mP X POl                                      I4C30MP4POL


                                                                      FC X mC                                      I4C120FCMC


                                                                       FS X FS                                     I4C180FS6FS6

                                                                      FW X FW                                      14C600FWFW


                                                                    mC X POlhW                                    I4C36MCPOLHW


                                                                     mC X QCC                                      I4C48MCQCC

                                                                      mI X POl                                     I4C60MI4POL

                                                                      mI X QCC                                     I4C24MI4QCC


                                                                      mP X mP                                     I8C72MP8MP8

                                                                      FS X mP                                      I8C24FS8MP8

                                                                POlNE X POlNE                                    IC672POLNEPOLNE


                      CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                       103
                                                                       TyPE II & III HOSE ASSEMBLIES
                National Energy is a Cga approved Type II and Type III hose assembly and testing facility. We are
                capable of providing tagged and approved assemblies with various end configurations and custom length
                requirements.

                Type II Hose Assemblies
                Goodall N2737 Type II hose assemblies are built to order and tested / tagged prior to shipment. Type II hose is approved for Liquid Propane and
                Natural gas vapor and meets the requirements of CAN / CGA 8.1-M86.
                Specifications:
                ■ Inner Tube - Black Nitrile Tube
                ■ Reinforcement - Stainless Steel braid over a textile braid
                ■ Cover - Oil Resistant Textile cover impregnated with Neoprene
                ■ Rated for 350 PSI at temperatures from -40° to 200°F
                ■ UL approved for use w/ LP gas MH8393
                ■ Two piece manually installed hose ends
                ■ Hydrostatically tested at 1.5 times the working pressure and CGA tagged with the test date

                 NEE #                 I.d.            O.d.             Weight               Temp range           Working Pressure          minimum Bend radius
                 N2737-12             0.75”            1.08”          0.456 lbs/ft           -40° to 200° F            350 PSI                         6.5”
                 N2737-16              1.0”            1.23”          0.442 lbs/ft           -40° to 200° F            350 PSI                        7.38”
                 N2737-20              1.25”           1.5”            0.52 lbs/ft           -40° to 200° F            350 PSI                         9.0”
                 N2737-32              2.0”            2.22”           0.94 lbs/ft           -40° to 200° F            350 PSI                        13.25”
                 N2737-8               0.5”            .77”           0.264 lbs/ft           -40° to 200° F            350 PSI                        4.63”
HOSE & TUBING




                NH3                    Goodall N2595 “Rifleman” Anhydrous Ammonia (NH3) hose is available in bulk or
                                       pre-assembled with various hose-end configurations.
                Hose
                                                                                                                 Working       Specifications:
                                        NEE #             I.d.       O.d.        Weight         Temp range
                                                                                                                 Pressure      ■ Inner Tube - High grade low permeation butyl.
                                        N259507          0.75”       1.23”      .49 Lbs/Ft      -40° to 180°F     350 PSI      ■ Reinforcement - High tensile stainless steel with a textile breaker.
                                                                                                                               ■ Cover - Black oil, ozone and weather resistant neoprene cover.
                                        N259510            1”        1.53”      .67 Lbs/Ft      -40° to 180°F     350 PSI      ■ Rated for 350 PSI at temperatures from -40° to 180° F.
                                        N259512           1.25”      1.84”      .95 Lbs/Ft      -40° to 180°F     350 PSI      ■ UL approved for use w/ NH3.
                                                                                                                               ■ Two piece clamp type, reusable hose ends.
                                        N259520            2”        1.73”     1.78 Lbs/Ft      -40° to 180°F     350 PSI
                                                                                                                               ■ Branded with removal date.



                Type III                      Aeroquip CR170 Type III hose is specifically designed for use on Automotive and Forklift LPG applications and is the only hose approved
                                              for use in these applications by CSA.

                                              CGA Type III hose assemblies are built to order and tested / tagged prior to shipment. Type III hose is approved for Liquid Propane and Natural
                                              gas vapor and meets the requirements of CAN / CGA 8.1-M86.
                                              Specifications:
                                              ■ Inner Tube - Thermoplastic.
                                              ■ Reinforcement - Stainless Steel braid over a textile braid.
                                              ■ Cover - Oil Resistant Perforated Synthetic Rubber.
                                              ■ Rated for 350 PSI at temperatures from -40° to 200° F.
                                              ■ Hydraulically crimped non-reusable hose ends.
                                              ■ Hydrostatically tested at 1.5 times the working pressure and CGA tagged with the test date.

                                                                                                                                                                Working          minimum Bend
                                               NEE #                   description                  I.d.        O.d.         Weight        Temp range
                                                                                                                                                                Pressure             radius
                                               HAC-4-*            1/4 inch hose assembly            .19”        .52”        .22 Lbs/Ft     -40° to 250° F          350                  3.0”
                                               HAC-6-*            3/8 inch hose assembly            .31”        .67”        .26 Lbs/Ft     -40° to 250° F          350                  4.0”
                                               HAC-8-*            1/2 inch hose assembly            .41”        .77”        .28 Lbs/Ft     -40° to 250° F          350                 4.62”
                                              * = Length in feet



                104               NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                             I   ON TH E WE B w w w.nee.ca
                                             FLEXIBLE CONNECTORS & VAPOR HOSE
Flexible Connectors
Stainless Steel CSA approved metal hose assemblies with carbon steel ends are used to prevent damage to piping systems
caused by vibration, thermal expansion and misalignment.

CSA Approved to CAN/CGA - 8.1, Rated for 350 PSI or 275 PSI when 150 # flanges are used. Suitable for use with Natural Gas and Propane.
To order assemblies, supply NEE with the over-all length requirements and the end connection configurations.

Features:
■ Carbon Steel schedule 80 ends, available in Male Pipe (NPT), 150 or 300 Lbs ANSI flanges.
■ CSA permanently attached label.
■ Wire braid stainless steel reinforcements over convoluted stainless steel hose.
■ Available in diameters from 1/2” to 6”.



Vapor Hose
Neoprene-lined, oil and heat resistant, coil wire support prevents kinks and permits free flow regardless of the degree of bend.
These are non-porous vapor hoses for propane and natural gas carburetion system between the vaporizer and the mixer. Heavy-duty for extreme service.
Rated for temperatures of -30° to 260° F and to 40 PSI.

 NEE #                     length                 I.d.
 VH1/2        Sold in 50’ and 10’ Lengths         1/2”
 V10          Sold in 50’ and 10’ Lengths         5/8”




                                                                                                                                                                           HOSE & TUBING
 V12          Sold in 50’ and 10’ Lengths         3/4”
 V16          Sold in 50’ and 10’ Lengths         1”



Hose Buns / Protectors and Retrievers
hosebun™ is a patented urethane saddle designed to properly suspend a hose. The hose manufacturer’s maximum bending radius is protected and the hose is kept from
kinking. The Hosebun™ is the proper method to suspend a hose in a permanent or temporary semi-rigid position. Too many hoses have been hoisted with rope or nylon
slings, even wide body slings, which don’t provide the protection your hose deserves. hose retriever keeps hoses suspended at truck stops and industrial sites. Protects
hoses from excessive wear and damage. Prevents tangles and kinking, reduces injury to customers from tripping accidents.

 NEE #          Weight              length           description    For hose I.d.      Sling type         Sling height *
 HB100ED          3 lb                16                 Hose Bun        1”         D-ring (RS 16 D)            6”
 HB125ED         3.25 lb             17.5                Hose Bun      1-1/4”       D-ring (RS 16 D)           5.75”
 HB150ED         3.75 lb             19.5                Hose Bun      1-1/2”       D-ring (RS 16 D)           4.5”
 HB200ED          4 lb                18                 Hose Bun        2”         D-ring (RS 200 D)          7.25”
 870             30 lbs       10” H x 4-1/4”W      Hose Retriever    1/2” to 3”       360° Swivel       Installs on 2” pipe

* measured from the top of bun to top of sling.




                                                                                                    hose Bun




                                                                                                                                     hose retriever



                                    CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                     105
                                                                                   COPPER TUBING
                G Gas Copper Tubing
                Suitable for above ground and indoor use for natural gas and propane installations.
                Meets the requirements of ASTM B837.

                 NEE #               length         O.d.          Wall Thickness
                 GT-10-100            100’          5/8”               0.48
                 GT-10-50              50’          5/8”               0.48
                 GT-12-50              50’          3/4”               0.42
                 GT-6-100             100’          3/8”               0.30
                 GT-6-50               50’          3/8”               0.30
                 GT-8-100             100’          1/2”               0.35
                 GT-8-50               50’          1/2”               0.35




                Refrigeration Tubing                                                                         Type k Copper Tubing
                For use with refrigeration applications. Dehydrated, cleaned and capped to                  Suitable for outdoor underground applications with natural gas and propane
                reduce refrigerant contamination. Meets the requirements of ASTM B280.                      installations. Meets the requirements of ASTM B88.

                 NEE #                length             O.d.           Wall Thickness                       NEE #              length           I.d.      O.d.     Wall Thickness
HOSE & TUBING




                 CT-10-50               50’                5/8”               0.035”                         KT-10-100            100’           5/8”      3/4”         0.049”
                 CT-12-50               50’                3/4”               0.035”                         KT-4-100             100’           1/4”      3/8”         0.035”
                 CT-4-50                50’                1/4”               0.030”                         KT-6-100             100’           3/8”      1/2”         0.049”
                 CT-6-100              100’                3/8”               0.032”                         KT-8-100             100’           1/2”      5/8”         0.049”
                 CT-6-50                50’                3/8”               0.032”
                 CT-8-100              100’                1/2”               0.032”
                 CT-8-50                50’                1/2”               0.032”




                Gas Tech™ & Oil-Pro Tech™ Poly Coated Copper Tube

                                       Suitable for above or below ground applications, indoor                                                                             Wall
                                                                                                            NEE #             length      I.d.     O.d.    Fuel Type
                                       and/or outdoor.                                                                                                                   Thickness
                                                                                                            21200               250’      1/2”     5/8”       Gas          .040”
                                       Meets the requirements of ASTM B88 / B837. Type L copper
                                       coated with a flexible yellow HDPE (high density polyethylene)       21210               100’      1/2”     5/8”       Gas          .040”
                                       outer sleeve that provides additional protection and eliminates      21260               60’       1/2”     5/8”       Gas          .040”
                                       the requirement for on-site sleeving of copper tube prior to
                                       burying.                                                             21400               250’      1/4”     3/8”       Gas          .030”
                                                                                                            23410               100’      3/4”     7/8”       Gas          .045”
                                       Oil-Tech coated copper is used in the fuel oil industry for indoor
                                       and outdoor installations. When installed underground, it            23800               250’      3/8”      1/2”      Gas          .035”
                                       must be accompanied by an approved secondary containment             23810               100’      3/8”      1/2”      Gas          .035”
                                       system with leak detection as required by code.
                                                                                                            25810               100’      5/8”     3/4”       Gas          .042”
                                       Both types of coated copper feature a well labeled casing            30121-100’COIL      100’      3/8”      1/2”      Oil          .035”
                                       indicating the number of feet used as well as identifying the
                                                                                                            30381-100’COIL      100’      1/4”     3/8”       Oil          .032”
                                       tube as a gas or oil line.




                106              NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                   I    ON TH E WE B w w w.nee.ca
                                        COPPER TUBING, TUBING ACCESSORIES
Gas-Tec Plus™ Outer Sleeved Copper Tube
Gas-Tec Plus combines Kamco’s Gas-Tec® tubing with a high density polyethylene (HDPE) sleeve. This now eliminates
the hassle and expense of on-site sleeving in areas where our factory-coated copper tubing needs additional protection.
And when the tubing is buried under concrete, not only is the inner tube protected from any damage, but if necessary,
Gas-Tec Plus allows for quick and easy removal of the tubing without having to jackhammer the concrete.

Features & Benefits:
■ Can be used both above and below ground
■ Protects copper from corrosion
■ Continuously line marked for clearer identification                                        NEE #                length       I.d.   O.d      Fuel Type    Wall Thickness
■ Easy to install - no additional training required                                          24121-100’COIL        100’       1/2”    5/8”       Gas             .040”
■ Uses standard flare fittings
■ Economical                                                                                 24141-100’COIL        100’       1/4”    3/8”       Gas             .030”
■ Eliminates on-site sleeving for special applications                                       24381-100’COIL        100’       3/8”    1/2”       Gas             .035”
■ Protects tubing from exterior physical damage (flower beds, door thresholds
   and high traffic areas)
■ Quick and easy removal of tubing from concrete if necessary
■ Durable high density polyethylene sleeve (HDPE)
■ Time & cost savings
Effective January 1, 2006, TSSA is adopting the CSA B149.1-05 with Ontario amendments and TSSA’s Field Approved Code. Of interest to installers of Kamco Products line
of Gas tubing, this is a change to 6.15.4 which provides for the installation of piping or tubing in rocky terrain. Not all Provinces have amendments in place. The use of this
product for shallow burial applicws subject to approval by the authority having jurisdiction.




PVC Gas Tape                                                     Termination Flange




                                                                                                                                                                                  HOSE & TUBING
Yellow with Black letters. Strong vinyl marking tape
                                                                The Copper Stopper™ termination flange transitions the copper
with rubber adhesive. Used to economically label gas
                                                                tube back to standard pipe, reducing the amount of tubing
lines in compliance with the B149 code.
                                                                required for a job and protecting the line from damage.

                                                                Allows the installer to finish the job and pressure test the system
                                                                on the first visit to the site. Fits all 3/8”, 1/2”, and 5/8” flare
                                                                                                                                       NEE #
                                                                MIP fittings and can easily be joined to standard FIP fittings.
                                                                Suitable for both indoor and outdoor applications.                     71900




                                                                 Tube Spring Benders
                                                                 Produce high quality accurate bends on your                NEE #     Size
                                                                 copper tubing. The Spring Bender allows for fast,
 NEE #              description           Size                   free form bending with minimal effort. Now you             79010     3/8”
 TAPE-NG            Natural Gas     2” x 66’ Mtr Roll            can perfectly bend the tubing to any shape without         79015     1/2”
                                                                 collaPSIng the walls. It provides a high quality
 TAPE-PROPANE         Propane       2” x 66’ Mtr Roll            professional appearance quickly and with ease.             79020     5/8”




Tube Cutters                                                                                   NEE #        description
                                                                                                            Tube Cutter 1/4”–13/8” O.D. - Heavy duty telescopic action
                                                    7500000                                    7350000
                                                                                                            precision tube cutting
                                                                                               7350005      Replacement Wheel - Copper Tube
                                                                                                            Automatic Pipe Cutter 1/4”– 2 5/8” O.D. - Spring-loaded action for
                                                                                               7500000
                                                                                                            instant change in tube sizes
                                                            7222000                                         Automatic Pipe Cutter 2”– 5” O.D. - Spring-loaded action for
  7350000                   7510000                                                            7510000
                                                                                                            instant change in tube sizes
                                                                                                            Minicut 1/4”–7/8” O.D. - Fully adjustable precision tube cutting
                                                                                               7222000
                                                                                                            in limited space




                                CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                                107
                                                        COPPER TUBING, TUBING ACCESSORIES
                Flaring Tubes
                Imperial Tools for flaring various sizes of bare and poly-coated copper tubing.

                 NEE #         For Tube Sizes
                 195FC         3/16” to 5/8” O.D Tube 45º flare
                 500FCSP       3/16” to 5/8” O.D Tube 45º flare, flares & burnishes




                                                                  Faceted, hardened steel, chrome-finished cone rolls out perfect 45° flares above die block, and automatically burnishes
                                                                  flare face reducing the need for deburring. Original wall thickness is maintained at base of flare. New slip-on yoke permits
                                           500FCSP                use in tight quarters, where there is little space between nut and tube end. Larger handle, with better leverage, and preci-
                                                                  sion threads on feed screw make flaring effortless. Heat treated dies grip tubing without scoring. Satin chrome and black
                                                                  finish. Weight: 1.5 lbs.




                Flares 7 sizes of tubing. Rugged forged steel slip-on yoke and hardened flaring bar. Positive clamping action of bars prevents
                tube slippage. Self centering yoke with swivel-type, hardened steel, chrome-finished flaring cone forms better flares with less
HOSE & TUBING




                effort. Design of yoke permits flaring where there is little space between nut and tube end. Satin finish nickel-chrome plated.
                Weight: 2.0 lbs.


                                                                                                                                                               195FC




                108               NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                        I    ON TH E WE B w w w.nee.ca
                                                         DORMONT CONNECTORS

Heavy-duty, flexible gas connectors for indoor and outdoor appliances used in residential applications.

Available Tube Diameters:
10 Series: 3/8” OD / 1/4” ID         Recommended for water heaters, gas logs and space heaters
20 Series: 1/2” OD / 3/8” ID         Recommended for dryers and water heaters
30 Series: 5/8” OD / 1/2” ID         Recommended for ranges, furnaces, manufactured homes
40 Series: 1” OD / 3/4” ID           Recommended for Boilers, Furnaces, Gas Meters and other high BTU loads
50 Series: 1-1/4” OD / 1” ID         Recommended for Boilers, Furnaces, Gas Meters and other high BTU loads
60 Series: 1-1/2” OD / 1-1/4” ID     Recommended for Boilers, Furnaces, Gas Meters and other high BTU loads

Available Lengths:
12”, 18”, 24”, 30”, 36”, 48”, 60” and 72” with MNPT, FNPT and M.Flare ends.

Tubing: Annealed, 304 stainless steel (ASTM A240)
Flare nuts: Brass or plated steel
adapters: Brass or plated steel
Optional Coating: Heavy-duty, antimicrobial hot-dipped gray PVC (for ½” OD and 5/8” OD connectors only)

CSA design-certified for indoor and outdoor use. 100% factory leak tested. SAE J512 standard 45° flare adapters
with the exception of 30 series (5/8” OD).

5/8” OD connectors feature special 15/16” threads required for CSA design certification.

To order, specify series, length and end configuration.




                                                                                                                        HOSE & TUBING




                               CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                              109
                                                                         GAS APPLIANCE CONNECTORS
                Dormont Moveable and Stationary Food Service Appliance Connectors
                Product Information
                n Patented Stressguard® Technology reduces stress at both ends of the connector. PATENT#6, 742, 815

                n Antimicrobial PVC Coating (PATENT PENDING) inhibits growth of bacteria, mold and mildew on the gas connector
                n Heavy-duty, flexible, corrugated 304 stainless steel tubing
                n Tightly woven stainless steel braid prevents corrugations from stretching as equipment is moved
                n This hose meets all of the current national building codes and standards


                Product Specification
                n Diameter: ½”, ¾”, 1”, 1 ¼”
                n Length: 24”, 36”, 48”, 60”, 72”
                n can be purchased individually with any of our safety products, or in a Kit box including everything
                 you need for a Safe Gas Connection.

                                                    Selecting a Dormont Safety System Gas Connector Assembly
                    16     Diameter         Coated or Uncoated      QD Device        SwivelMax™         Restraining Cable       Length (in)       Packaging
                                                                                                                                                                         Part Number Explanations
                    16                                                                                                                                                   B =       Braid
                         Enter desired     Enter type of gas        Enter           Enter choice of     Enter R to order a   Enter length        Enter                   P =       PVC Coated
                         diameter of       connector                Dormont         swivels             restraining cable.   of connector        packaging                         (with Antimicrobial Coating)
                         connector                                  QD fitting                                               in inches           choice
                                                                                                                                                                         Q =       Quick-Disconnect
                         Example:                                   Example:        Example:            Leave blank for no   Example:            Example:                          (SnapFast)
                         50 = 1/2” ID      Example:                 CF = Safety     S = Single          restraining cable    24”                 BX = Box                CF =      Safety Quik Quick-
                         75 = 3/4” ID      BP = Braided & PVC       Quick™          Swivel                                   36”                 (For 36” & 48”
HOSE & TUBING




                         100 = 1” ID       Coated                   (1/2”, 3/4” &   2S = Double                              48”                 PVC coated                        Disconnect Valve
                         125 = 1-1/4” ID                            1” only)        Swivel                                   60”                 connector               S =       SwivelMAX
                                           B = Braided (uncoated)                                                            72”                 only)
                                                                    Q = Snap-       Leave blank for                                                                      R =       Restraining Device
                                                                    Fast™           choice of NO                             (Most common        Leave blank                       & Hardware
                                                                                    swivel                                   sizes ordered:      for choice of
                                                                                                                             36” & 48”)          polybag

                    Sample Part Number: 1650BPQCF2SR48
                    1/2” ID Braided, Coated (PVC) 48” Gas Connector with Safety Quick, Double SwivelMax and a Restraining Cable.



                Hose Master Moveable & Stationary Appliance Connectors
                LiveLink Poly Coated 360° Swivel
                connectors                                                                      NEE #            description / Size
                                                                                                AG-6C            Swivel Link Adapter, 1/2”                       NEE #          description / Size
                LLP Connectors are stainless steel
                corugated hoses, encased in stainless                                           AG-6D            Swivel Link Adapter, 3/4”                       HG-2D-60       3/4” M NPT, 60” Long
                steel braid, covered with a rugged elastic                                      AG-6E            Swivel Link Adapter, 1”                         HG-2D-72       3/4” M NPT, 72” Long
                coating.
                                                                                                AG-6F            Swivel Link Adapter, 1-1/4”                     HG-2E-12       1” M NPT, 12” Long
                Full 180° swivel ends allow commercial                                          AG-RC            3-6 FT Restraining Device Kit                   HG-2E-24       1” M NPT, 24” Long
                cleaning equipment to be pulled out for
                cleaning without requiring tools. Other                                         HG-2C-12         1/2” M NPT, 12” Long                            HG-2E-36       1” M NPT, 36” Long
                sizes and lengths available. Contact NEE                 ag-6C                  HG-2C-24         1/2” M NPT, 24” Long                            HG-2E-48       1” M NPT, 48” Long
                for details.
                                                                                                HG-2C-36         1/2” M NPT, 36” Long                            HG-2E-60       1” M NPT, 60” Long
                                                                                                HG-2C-48         1/2” M NPT, 48” Long                            HG-2E-72       1” M NPT, 72” Long
                                                                                                HG-2C-60         1/2” M NPT, 60” Long                            HG-2F-12       1-1/4” M NPT, 12 “ Long
                                                                                                HG-2C-72         1/2” M NPT, 72” Long                            HG-2F-24       1-1/4” M NPT, 24 “ Long
                                                                                                HG-2D-12         3/4” M NPT, 12” Long                            HG-2F-36       1-1/4” M NPT, 36 “ Long
                                                                                                HG-2D-24         3/4” M NPT, 24” Long                            HG-2F-48       1-1/4” M NPT, 48 “ Long
                                                                                                HG-2D-36         3/4” M NPT, 36” Long                            HG-2F-60       1-1/4” M NPT, 60 “ Long
                                                                                                HG-2D-48         3/4” M NPT, 48” Long                            HG-2F-72       1-1/4” M NPT, 72 “ Long



                110                      NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                             I     ON TH E WE B w w w.nee.ca
                       POLyTUBE (PE2406) GAS DISTRIBUTION COMPONENTS
Polyethelyne piping systems with mechanical fittings are suitable for Propane and Natural gas underground applications up to 30 PSI. all
tubing, risers and fittings are certified to the CSa B137.4 specification and must be installed in accordance with the B149 code. Constab
mechanical fittings are designed to seal on the inside of the tube and reduce the possibility of a leak occuring due to scratches on the Od of the
PE 2406 Poly tube. Easily installed without special tools or costly equipment. Simply chamfer the inside of the tube, mark the stab depth and
insert the tube into the fitting.




ConStab® Fittings                                                                                                       Unique features include:
                                                                                                                        ■ Two internal seals at each connection point
The internal seal enables each fitting to seal on scratched pipe. A seal is maintained on the smooth inside surface
                                                                                                                        ■ Fixed stiffener
of the polyethylene pipe, regardless of the exterior surface of the piping. This improved seal protection creates the
                                                                                                                        ■ Self-locking gripper
ultimate design for mechanical joints. Constab® Mechanical Fittings up to 1” sizes are supplied from the factory
                                                                                                                        ■ Moisture Lip and Uni-body construction
with a disposable Chamfer tool in the bag with the fitting.




Constab® 3-Way Tees                                                                           Constab® End Caps
                                 NEE #                  Size                                                               NEE #                Size
                                 3259-50-1004-66        1/2” CTS                                                           3259-53-1004-00      1/2” CTS
                                 3259-50-1013-66        3/4” IPS                                                           3259-53-1013-00      3/4” IPS
                                 3259-50-1014-00        1” IPS                                                             3259-53-1014-00      1” IPS




                                                                                                                                                                        HOSE & TUBING
                                 3259-50-1015-00        1-1/4” IPS                                                         3259-53-1015-00      1-1/4” IPS
                                 3259-50-1017-00        2” IPS                                                             3259-53-1017-00      2” IPS


Constab® 90° Elbows                                                                           Constab® Full Couplings
                                 NEE #                  Size                                                               NEE #                Size
                                 3259-51-1004-00        1/2” CTS                                                           3259-52-1004-00      1/2” CTS
                                 3259-51-1013-00        3/4” IPS                                                           3259-52-1013-00      3/4” IPS
                                 3259-51-1014-00        1” IPS                                                             3259-52-1014-00      1” IPS
                                 3259-51-1015-00        1 1/4” IPS                                                         3259-52-1015-00      1-1/4” IPS
                                 3259-51-1017-00        2” IPS                                                             3259-52-1017-00      2” IPS



Constab® Eliminator Saddles - Tapping Tees                                                    Constab® reducer Couplings
                                 NEE #                Size                                                                 NEE #                Size
                                 5864-15-1604-00      1 1/4” IPS x 1/2” CTS                                                3259-54-1304-00      3/4” IPS x 1/2” CTS
                                 5764-17-1604-00      2” IPS x 1/2” CTS                                                    3259-54-1404-00      1” IPS X 1/2” CTS
                                 5764-17-1613-00      2” IPS x 3/4” IPS                                                    3259-54-1413-00      1” IPS X 3/4” IPS
                                 5764-17-1614-00      2” IPS x 1” IPS
                                 5764-21-1604-00      4” IPS x 1/2” CTS
                                 5764-21-1613-00      4” IPS x 3/4” IPS
                                 5764-21-1614-00      4” IPS x 1” IPS




                                CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                           111
                                        POLyTUBE (PE2406) GAS DISTRIBUTION COMPONENTS
                Rigid (Pre-Bent) Anodeless Risers & Transition Fittings

                                                                                                     NEE #                Size x Tube                Vertical             horizontal     Sdr/Wall

                              With 10” Polyethelyne Pigtail for use with                         231050630130         3/4” NPT x 1/2” CTS              30”`                   15”         0.090”
                              ConStab fittings. Made with external thin                          241051050820         3/4” NPT x 3/4” IPS              24”                    16”         SDR 11
                              film epoxy coating on schedule 30 steel pipe,
                              CSA approved, IAPMO listed, meets all D.O.T.                       241051050830         3/4” NPT x 3/4” IPS              30”                    16”         SDR 11
                              requirements. These risers are supplied with NPT                   241321320830          1.0” NPT x 1” IPS               30”                    17”         SDR 11
                              connections above ground and a 10” polyethylene
                                                                                                 241661660760        1-1/4” NPT x 1 1/4” IPS           30”                    24”         SDR 10
                              pig-tail that is connected to your tubing
                              underground. The underground connection is                         242382380840          2.0” NPT x 2” IPS               36”                    31”         SDR 11
                              made to the PE 2406 Polyethylene tubing with the
                                                                                                 250031030361         1/2” NPT x 1/2” CTS              30”                    15”         0.090”
                              Con-Stab fitting to suit the specific application. This
                              tube-to-fitting connection may be made to a tee,                   250499032000         3/4” NPT x 1/2” CTS              22”                    16”         0.090”
                              elbow or coupling depending on your application,                   255001290000          3/4” NPT x 1” CTS               31”                    18”         0.099”
                              allowing tubing to approach the riser from various
                              or multiple directions.                                            101321320800           1” NPT x 1” IPS                             Transition Fitting




                Flexible Service Head Adapter Risers
HOSE & TUBING




                 NEE #                          description                Connection Size      length
                 250573037027            1/2” MPT x 1/2” CTS tube             1/2” MNPT        36” flex
                 250573037028            1/2” MPT x 1/2” CTS tube             1/2” MNPT        72” flex        With Centering Sleeves/Heat Shield Liner
                 250573037030            3/4” MPT x 1/2” CTS tube             3/4” MNPT        72” flex
                                                                                                               These risers offer many of the features that the prebent
                 255000840000              1” MPT x 1” CTS tube                1” MNPT         36” flex        service head adapter risers offer, with the added feature of
                 651661660700           1 1/4” MPT x 1 1/4” IPS tube         1-1/4” MNPT       30” flex        utilizing armour flexible hose. The flexible hose is attached
                                                                                                               to the steel portion of the riser with a transition that is
                 1253-92-1004-84         1/2” MPT x 1/2” CTS tube             1/2” MNPT        84” flex        stronger in tensile than the flex itself.
                 1353-92-1004-36         3/4” MPT x 1/2” CTS tube             3/4” MNPT        36” flex
                                                                                                               Flexible risers provide the user with a design that permits
                 1353-92-1004-60         3/4” MPT x 1/2” CTS tube             3/4” MNPT        60” flex        variable ground level depths and eliminates the need
                 1353-92-1004-36         3/4” MPT x 1/2” CTS tube             3/4” MNPT        36” flex        for purchasing risers with various vertical lengths. The
                                                                                                               polyethylene tubing connection to this riser is made with
                 1353-92-1013-60          3/4” MPT x 3/4 IPS tube             3/4” MNPT        60” flex
                                                                                                               simple hand tools by inserting the tubing through the riser
                 1353-92-1013-84          3/4” MPT x 3/4 IPS tube             3/4” MNPT        84” flex        and connecting it to the service head adapter at the other
                                                                                                               end of the riser.
                 1453-92-1008-36           1” MPT x 1” CTS tube                1” MNPT         36” flex
                 1453-92-1008-60           1” MPT x 1” CTS tube                1” MNPT         60” flex        Ideal for tank to building installations between first and
                 1553-96-1015-36        1 1/4” MPT x 1 1/4” IPS tube         1-1/4” MNPT       36” flex        second stage regulators.




                Rigid (Pre-Bent) Service Head Adapter Risers
                With Centering Sleeves / Heat Shield Liner. Manufactured using plated service head adapters and a schedule 40 epoxy coated shield pipe. Furnished with a threaded
                moisture seal and gasket.

                These risers offer many of the features that the pre-bent anodeless risers offer, with
                the added feature of making the connection from the polytube to the service head             NEE #                  Size x Tube          Vertical         horizontal     Sdr/Wall
                adapter above ground instead of connecting to a mechanical “Con-Stab” fitting                250573037007       3/4” NPT x 1/2” CTS           30”             20”         0.090”
                underground as done with the standard pre-bent risers. This connection is made in
                                                                                                             255001670000        1.0” NPT x 1” CTS            30”             30”         0.099”
                the same manner as connecting to the Flex risers. The benefit of the rigid service
                head risers is the added protection from a metal riser.




                112                NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                        I   ON TH E WE B w w w.nee.ca
                      POLyTUBE (PE2406) GAS DISTRIBUTION COMPONENTS
Tubing
                                                         NEE #                description                                            Size          length               Sdr/Wall
                                                         PE2406-12CTS         Line marked with coil length every 2 ft.             1/2” CTS       1,000’ Coil        SDR 7 / 0.090”
                                                         PE2406-34            Line marked with coil length every 2 ft.             3/4” IPS        500’ Coil         SDR 11 / 0.095”
                                                         PE2406-100           Line marked with coil length every 2 ft.              1” IPS         500’ Coil         SDR 11 / 0.119”
                                                         PE2406-100CTS        Line marked with coil length every 2 ft.              1” CTS         500’ Coil        SDR 11.5 / 0.099”
                                                         PE2406-114           Line marked with coil length every 2 ft.            1-1/4” IPS       500’ Coil         SDR 10 / 0.166”
                                                         PE2406-200           Line marked with coil length every 2 ft.              2” IPS         500’ Coil         SDR 11 / 0.216”
                                                         MTYG-21              Tracer Tape                                             2”                        1,000’ Roll
                                                         T1066                Tracer Wire                                          14 gauge                    150 meters
                                                         T1069                Tracer wire                                          12 gauge                    150 meters

                                                        Consult the tables B.1 to B.5 in the CSA B149.1-05 for flow capacities at various pressures.
                                                        IPS = Iron Pipe Size                   Sdr = Standard Dimension
                                                        CTS = Copper Tube Size                 ratio = Ratio of Diameter to Wall Thickness



Chamfer Tools - For Constab® Installations (Inside & Outside Chamfer)
 NEE #                 Size                        Each Tool chamfers both the Outside Diameter (O.D.) and Inside
 0000-33-5481-00       1/2” CTS 3/4” IPS           Diameter (I.D.) of the Pipe and can be used to mark the stab depth.




                                                                                                                                                                                        HOSE & TUBING
 0000-33-5516-00       1” IPS 3/4” IPS             The Continental Chamfer tool will work with both Continental and
 0000-33-5485-00       1-1/4” IPS                  Perfection applications, as it chamfers the tube on the inside and
                                                   the outside.
 0000-33-5486-00       2” IPS




Chamfer Tools - For Perfection Installations (Outside Chamfer)                                                                                  NEE #      Size

Allows the tubing to be stabbed without damaging internal seals on connectors.                                                                  51005      1/2” CTS x 1” CTS
                                                                                                                                                51016      1/2” CTS x 3/4” IPS
For use only with Perfection couplings.
                                                                                                                                                51017      1/2” CTS X 3/4” IPS
                                                                                                                                                51030      1-1/4” IPS
                                                                                                                                                51040      2” IPS




Brackets and Posts for Riser Support
Epoxy Coated for Corrosion Protection

 NEE #                 description
 0000-17-6133-00       6” Standoff Riser Bracket
 B6U                   Universal Bracket
 B7                    Foundation Bracket (6” offset)
 DP                    Drive Post (1 1/4” schedule 40 x 60” Long)




                                CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                                         113
                                                        CORRUGATED STAINLESS STEEL TUBING
                                                                                                             Wardflex is a continuous, flexible, annular stainless
                                                                                                             steel gas piping system for applications up to 5 PSI.

                CSA approved to ANSI / 1AS-lc-1-1997 CSA 6.22 - M97 Fuel Piping Systems using Corrugated              ■   No heavy pipe cutting
                Stainless Steel Tubing (CSST). WardFlex CSST components are designed as a system and can              ■   No threading
                not be used interchangeably with components of any other CSST manufacturer. Applications
                include new construction, renovation and remodeling - wherever flexibility and labour savings
                                                                                                                      ■   Fewer measurements
                are important. WardFlex eliminates the majority of connections required to pipe a typical gas         ■   No mess
                installation. The fewer the connections, the faster the installation. Those connections that are      ■   reduced labour costs
                required can be made by one installer in a matter of minutes, reducing the chance of leaks.
                                                                                                                      ■   Carry 250 ft of “pipe” on your shoulders!


                Corrugated Stainless Steel Tubing                                                 Mechanical Tube Tees - Male
                                                                                                  Branch additional lines off of main gas line - tube to tube or tube to female pipe thread

                                                                                                                                     NEE #                                Size
                                                                                                                                     TEE12T                               1/2”
                 NEE #                      Size             length                                                                  TEE12TX38TX38T                1/2” x 3/8” x 3/8”
                 TUBE38-250               3/8” IPS          250’ Coil                                                                TEE12TX12TX38T                1/2” x 1/2” x 3/8”
                 TUBE38-100               3/8” IPS          100’ Coil                                                                TEE34TX34TX12T                3/4” x 3/4” x 1/2”
                 TUBE38-50                3/8” IPS           50’ Coil                                                                TEE34T                        3/4” x 3/4” x 3/4”
HOSE & TUBING




                 TUBE12-250               1/2” IPS          250’ Coil                                                                TEE12TX12T38T                1/2 X 1/2 X 3/8 FNPT
                 TUBE12-100               1/2” IPS          100’ Coil                                                                TEE12TX12TX12FP              1/2 X 1/2 X 1/2 FNPT
                 TUBE12-50                1/2” IPS           50’ Coil                                                                TEE12TX12TX34FP              1/2 X 1/2 X 3/4 FNPT
                 TUBE34-180               3/4” IPS          180’ Coil                                                                TEE34TX12TX12T                  3/4 X 1/2 X 1/2
                 TUBE34-100               3/4” IPS          100’ Coil                                                                TEE34TX34TX34FP              3/4 X 3/4 X 3/4 FNPT
                 TUBE1-50                 3/4” IPS           50’ Coil                                                                TEE1T                              1X1X1
                 TUBE1-180                 1” IPS           180’ Coil                                                                TEE1TX1TX34T                      1 X 1 X 3/4
                 TUBE1-100                 1” IPS           100’ Coil                                                                TEE1TX1TX1FP                    1 X 1 X 1 FNPT
                 TUBE34-50                 1” IPS            50’ Coil                                                                TEE1TX1TX34FP                   1 X 1 X 3/4 FPT
                 TUBE114-100              1 1/4” IPS        100’ Coil                                                                TEE125TX125TX125T            1 1/4 X 1 1/4 X 1 1/4
                 TUBE114-50               1 1/4” IPS         50’ Coil                                                                TEE125TX125TX125FP        1 1/4 X 1 1/4 X 1 1/4 FNPT
                 TUBE114-250              1 1/4” IPS        250’ Coil                                                                TEE2TX2TX2T                        2X2X2
                 TUBE112-150              1 1/2” IPS        150’ Coil                                                                TEE2TX2TX2FP                    2 X 2 X 2 FNPT
                 TUBE2-150                 2” IPS           150’ Coil




                Mechanical Couplings
                 NEE #                   Size
                 MJC38                 3/8” IPS        Joins Two
                                                       Similar Size
                 MJC12                 1/2” IPS
                                                       Sections
                 MJC34                 3/4” IPS        of Tubing
                 MJC1                   1” IPS         Together

                 MJC-114              1 1/4” IPS
                 MJC-112              1 1/2” IPS
                 MJ-2                   2” IPS



                114              NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                                    I    ON TH E WE B w w w.nee.ca
                             WARDFLEX CORRUGATED STAINLESS STEEL TUBING
Mechanical Joint Fittings / Male NPT                                           Mechanical Joint Fittings / Female NPT
Attaches Tubing to Appliance, Regulator, Manifold or Tee                       Attaches Tubing to Appliance, Regulator, Manifold or Tee


                  NEE #                            Size             Case Qty    NEE #                         Size               Case Qty
                  MJ38TX12MP            3/8” Tube x 1/2” MNPT         24        MJ12TX38FP           1/2” tube x 3/8” FNPT
                  MJ12TX12MP            1/2” Tube x 1/2” MNPT         20        MJ12TX12FP           1/2” tube x 1/2” FNPT          20
                  MJ34TX34MP            3/4” Tube x 3/4” MNPT          12       MJ34TX34FP           3/4” tube x 3/4” FNPT          12
                  MJ1TX34MP              1” tube x 3/4” MNPT           8        MJ1TX34FP             1” tube x 3/4” FNPT           8
                  MJ1TX1MP                1” tube x 1” MNPT            8        MJ1TX1FP               1” tube x 1” FNPT            8
                  MJ114TX114MP         1 1/4” tube x 1 1/4” MNPT       4




Mechanical Joint Gaskets                                                       Malleable Iron Manifolds
Non-Asbestos Fiber Gaskets for All Tubing Joints and Terminations              Supply Multiple Appliances in Parallel from Main Distribution Point

 NEE #               Size                                                       NEE #                                    Size

 GASK38              3/8”                                                       MAN1/2-3X1/2                 1/2” with three 1/2” outlets

 GASK12               1/2”                                                      MAN3/4-3X1/2                 3/4” with three 1/2” outlets




                                                                                                                                                                HOSE & TUBING
 GASK34              3/4”                                                       MAN3/4-4X1/2                 3/4” with four - 1/2” outlets

 GASK1                1”                                                        MAN1/2-4X1/2                 1/2” with four - 1/2” outlets




Strip Wound Conduit
Protective Galvanized Steel Sleeve for Tubing

 NEE #                       Size        length
 STRWND38-12           3/8” Tubing         12”
 STRWND12-12           1/2” Tubing         12”
 STRWND34-12           3/4” Tubing         12”                                 Striker Plates
 STRWND1-12             1” Tubing          12”                                 Protection Plates for Exposed Tubing
 STRWND38-600          3/8” Tubing         50 ft
                                                                                NEE #                        description             length      Width
 STRWND12-600          1/2” Tubing         50 ft
                                                                                STRPLTFULL                 Full Striker Plate        11 1/2”     2 3/4”
 STRWND34-600          3/4” Tubing         50 ft
                                                                                STRPLTHALF                 Half Striker Plate           6 1/2”   2 3/4”
 STRWND1-600            1” Tubing          50 ft
                                                                                STRPLTLARGE               Large Striker Plate        17 1/2”     3 1/4”
 STRWND114-12         1 1/4” Tubing        12”
                                                                                STRPLTQUARTER            Quarter Striker Plate        2 3/4”     1 1/2”
 STRWND114-600        1 1/4” Tubing        50 ft




                                    CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                 115
                                         WARDFLEX CORRUGATED STAINLESS STEEL TUBING

                Outdoor Termination Outlet /                                           Outdoor Termination Outlet /
                Female NPT                                                             Male NPT
                Terminates Gas Piping at Appliance
                                                                                       Terminates Gas Piping at Appliance




                 NEE #                      dimensions / Size                           NEE #                      dimensions / Size
                 OUTTERM12T12FP           1/2” tube to 1/2” FNPT                        OUTTERM38T12MP          3/8” Tubing x 1/2” MNPT
                 OUTTERM34T34FP           3/4” tube to 3/4” FNPT                        OUTTERM12T12MP          1/2” Tubing x 1/2” MNPT
                 OUTTERM1T1FP               1” tube to 1” FNPT                          OUTTERM34T34MP          3/4” Tubing x 3/4” MNPT
                                                                                        OUTTERM1T34MP            1” Tubing x 3/4” MNPT
                                                                                        OUTTERM1T1MP              1” Tubing x 1” MNPT
HOSE & TUBING




                Indoor Termination Outlet
                Terminates Gas Piping at Appliance


                                                                                       Tubing Cutters
                                                                                       Ensures Proper Clean Cutting of Tubing




                       NEE #                   dimensions / Size                       NEE #                                     description

                       INTERM38T12MP        3/8” Tubing x 1/2” MNPT                    CUTTER38-34                          3/8” to 1/2” tube cutter

                       INTERM12T12MP        1/2” Tubing x 1/2” MNPT                    CUTTERWHEEL38-34          Hardened steel replacement cutter wheel

                       INTERM34T34MP        3/4” Tubing x 3/4” MNPT                    CUTTER34-114                     3/4” to 1 1/4” tube cutter

                       INTERM1T1MP            1” Tubing x 1” MNPT




                Coating Strippers
                Removes PVC Coating Sheath on Wardflex Tubing.

                                                                      NEE #                      description
                                                                      COATSTRIP38-34       for 3/8” and 1/2” tubing
                                                                      COATSTRIP1          for 3/4” and 1-1/4” tubing




                116              NATIONAL TOLL F R E E DI R ECTORY 1-866-574-5100                  I   ON TH E WE B w w w.nee.ca
                       WARDFLEX CORRUGATED STAINLESS STEEL TUBING
                                                                       NaTural gaS
                        maximum Capacity of Wardflex Corrugated Stainless Steel Tubing in Cubic Feet of gas per hour for:
                        Gas Pressure: 7-8 Inches Water Column          Pressure Drop: 0.5 inches Water Column             1 CuFt = 1,000 BTU
    length of                                                                     Tubing & Size End
   Tubing run        10a (3/8”) 15        15a (1/2”) 19        20a (3/4”) 25         25a (1”) 30        32a (1 1/4”) 37       38a (1 1/2”) 48       50a (2”) 62
      5 feet               63                  134                  270                   471                 1091                 2073                 3993
     10 feet               44                   95                  192                  330                  781                  1473                 2880
     15 feet               36                   77                  157                  268                  642                  1206                 2379
     20 feet               31                   67                  137                  231                  559                  1046                 2077
     25 feet               27                   60                  122                  206                  502                   937                 1870
     30 feet               25                   55                   112                 188                  460                   857                 1716
     40 feet               21                   47                   97                  162                  400                   743                 1498
     50 feet               19                   42                   87                  144                  360                   666                 1348
     60 feet               17                   39                   80                   131                 329                   609                 1237
     80 feet               15                   33                   69                   113                 287                   528                 1080
     100 feet              13                   30                   62                   101                 257                   473                 972
     150 feet              10                   24                   51                   82                   212                  387                 803
     200 feet               9                   21                   44                   71                  184                   336                 701
     300 feet               7                   17                   36                   57                   151                  275                 579




                                                                                                                                                                        HOSE & TUBING
     500 feet               5                   13                   28                   44                   118                  214                 455


                                                                            Propane
                                maximum Capacity of Wardflex Corrugated Stainless Steel Tubing in KBTu per hour for:
                                     Gas Pressure: 11-13 Inches Water Column         Pressure Drop: 0.5 inches Water Column
    length of                                                                     Tubing & Size End
   Tubing run        10a (3/8”) 15        15a (1/2”) 19        20a (3/4”) 25         25a (1”) 30        32a (1 1/4”) 37       38a (1 1/2”) 48       50a (2”) 62
      5 feet              100                   212                 427                  745                  1725                 3277                 6312
     10 feet               70                  150                  304                  522                  1235                 2328                 4553
     15 feet               57                  122                  248                  424                  1015                 1906                 3761
     20 feet               49                  106                   217                 365                  884                  1653                 3283
     25 feet               43                   95                  193                  326                  794                  1481                 2956
     30 feet               40                   87                   177                 297                  727                  1355                 2713
     40 feet               33                   74                  153                  256                  632                  1175                 2368
     50 feet               30                   66                  138                  228                  569                  1053                 2131
     60 feet               27                   62                  126                  207                  520                   963                 1955
     80 feet               24                   52                  109                   179                 454                   835                 1707
     100 feet              21                   47                   98                  160                  406                   748                 1536
     150 feet              16                   38                   81                  130                  335                   612                 1269
     200 feet              14                   33                   70                   112                 291                   531                 1108
     300 feet              11                   27                   57                   90                  239                   435                  915
     500 feet               8                   21                   44                   70                  187                   338                  719

Both tables include losses for four 90º bends and 2 end fittings. To compute flow capacity for tubing runs with a larger number of bends and/or fittings, add the
appropriate number of feet to the actual run length using the following formula:

L = 1.3 (n) L = Numbers of feet to be added to actual run length. n = Number of bends and/or fittings over six.

Contact NEE for capacities at other pressures.



                                CANADA’S LEADE R I N E N E RGy PRODUCTS EQU I PM E NT                                                                             117

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:45
posted:11/13/2011
language:English
pages:15