Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Drilling-milling machines

VIEWS: 110 PAGES: 2

									Drilling-milling machines

OPTI F 25 / OPTI F 30
Drilling-milling machines in proved qualiy and technique.
“VARIO” - models also incorporates continuous speed control, motor and frequency converter “made in
Germany”
Convincing arguments: quality, efficiency and price
  Wide range of applications
  Heavy-duty, solid cast-iron construction
  Solid, precise cross table and precision-ground
  Adjustable tapered gibs
  12 speeds, easily adjustable by means of V-belts
  Very wide speed range in the VARIO model from 35 - 3,300 rpm
  Very smooth running
  High concentricity precision due to taper roller
  bearings, less than 0.015 mm measured in the spindle sleeve
  Drilling/milling head height-adjustable via rack, rotatability of 360°
  Spindle sleeve crossfeed via handwheel (milling)
  Spindle sleeve feed via stargrip (drilling)
  Clutch for changing from manual coarse feed to manual fine feed
  M 12 draw-in rod for clamping the milling cutter holding fixture
  High dimensions thick-walled cast-iron upright (Ø 115 mm)
  Solid grey cast iron provides stability and lift up vibration
  F 25 Vario /F 30 Vario with engine and frequency converter in industrial quality
  “Made in Germany”
  Due to specifically designed cooling ribs the frequency converter is optimum cooled
  Cost-efficient and stable value
                                                                                                                                     OPTI F 25




Extent of supply:
  Cutter head with holding taper MT 3
  Draw-in rod M 12
  Drill chuck 1 - 13 mm
  Morse taper MT 3, B16
  Operating tools


Model                                                  OPTI F 25           OPTI F 25 Vario   OPTI F 30           OPTI F 30 Vario
Item No. (230 V)                                       333 1251            -                 333 1501            -
€ (VAT excl.)                                          1,190.00            -                 1,490.00            -
Item No. (400 V)                                       333 1250            301 3253          333 1500            301 3303
€ (VAT excl.)                                          1,190.00            2,090.00          1,490.00            2,390.00

Technical data
Drilling capacity in steel (max.)                      25 mm               25 mm             32 mm               32 mm
Milling cap.inserted-tooth cutter (max.)               76 mm               76 mm             76 mm               76 mm
Milling cap. of end mill cutter (max.)                 20 mm               20 mm             20 mm               20 mm
Working range                                          190 mm              190 mm            205 mm              205 mm
Spindle holding fixture                                MT 3                MT 3              MT3                 MT3
Sleeve travel                                          90 mm               90 mm             130 mm              130 mm
Head rotation                                          360°                 360°             360°                360°
Upright diameter                                       92 mm               92 mm             115 mm              115 mm
Crosstable size (L x W)                                585 x 190 mm        585 x 190 mm      730 x 210 mm        730 x 210 mm
T-slot size                                            14 mm               14 mm             16 mm               16 mm
Z-axis travel*)     z                                  340 mm              340 mm            465 mm              465 mm
Y-axis travel*)                                        145 mm              145 mm            185 mm              185 mm
X-axis travel *)  y      x                             340 mm              340 mm            430 mm              430 mm
Motor power 50 Hz                                      750 W               750 W             1.5 kW              1.5 kW
Spindle speeds, 12 steps                               95 - 2,160 rpm      30 - 3,450 rpm    125 - 2,500 rpm     35 - 3,300 rpm
Dimensions (L x W x H) mm                              930 x 950 x 900     950 x 950 x 900   1,120x1,110x1,100   1,120x1,110x1,100
Net weight                                             170 kg              175 kg            270 kg              275 kg
*)
     travels are reduced by using of measuring gibs for digital displays


18                                                                                                                                    Machines are CE compliant
  Drilling/milling head height-
  adjustable via rack,
  rotatability of 3600                                                                                                Only Vario model:
                                                                                                                        Industrial frequency converter
   Automatic off-switch                                                                                                 “Made in Germany”
  (IP 54 compliant) for easy                                                                                            Specifically designed cooling
  operation, with undervoltage                                                                                          fins ensure optimum cooling
  circuit breaker, right-left-                                                                                          of the frequency converter
  hand rotation




  Spindle sleeve crossfeed via
  handwheel (milling)
  Spindle sleeve feed via star-
  grip (drilling)


  High concentricity precision
  due to taper roller bearings,




                                                                                                                                                         Milling
  less than 0.015 mm measured
                                                                                                                       Amply dimensioned, thick-
  in the spindle
                                                                                                                       walled cast-iron column
  sleeve


                                                                                            OPTI F 30 with optional
                                                                                            universal substructure



  Solid, precise cross table and
  precision ground
  With T-slots
  Adjustable tapered gibs
  Adjustable by 3 pluggable hand-
                                                                                                                       Solid grey cast iron pedestal
  wheels
                                                                                                                       provides stability
                                                                                                                       and absorbs vibrations




                                                                                                                        Optional accessories:
                                                                                                                        Universal substructure
                                                                                                                        milling
                                                                                                                        L x W x H 790 x 590 x 720 mm;
                                                                                                                        Item No. 335 3001;
                                                                                                                        € 199.- VAT excl.




                                                                                                        Universal
                                                                                                        Coolant system




                       End mill cutter kit HSS

Accessories                                      Item No.   € (VAT excl.)   Accessories                                    Item No.     € (VAT excl.)
 Vice FMS 125                                    335 4125      149.00        Collet chucks kit 6 pcs. MT3 (M12)            335 2014          89.00
 Hydraulic machine vice HMS 125                  335 5127      599.00        Draw-in collet chuck kit 8 pcs. MT3           335 2050         189.00
 Parallel spacer kit 18 pcs.                     335 4000      169.00        End mill cutter kit HSS 20 pcs.               338 6200          95.00
 Universal-coolant system 230 V                  335 2002      179.00        Horizontal-vertical index head RT 150         335 6150         199.00
 Universal-coolant system 400 V                  335 2001      189.00        Height-adjustable tailstock RST 1             335 6155          89.00
 Clamping tool kit SPW 14                        335 2018       89.00       More acessories from page 27 onwards



Machines are CE compliant                                                                                                                           19

								
To top