PSN 202011 07 29tiparire

Document Sample
PSN 202011 07 29tiparire Powered By Docstoc
					                                           SECTIUNEA 1, CAPITOLUL 1
              Standarde Europene ce se adopta prin metoda traducerii (T)
                                                                                                         Me-
                                                                                                                 Pa-
Nr                                                                                                      toda                 Mini-
               Indicativ EN                              Titlul in limba engleza                                gini    CT
Crt                                                                                                     adop-                ster
                                                                                                                total
                                                                                                         tare
      EN ISO 6888-3:2003/AC:2005    Microbiology of food and animal feeding stuffs - Horizontal        TR           2   95 MADR
                                    method for the enumeration of coagulase-positive
                                    staphylococci (Staphylococcus aureus and other species) -
                                    Part 3: Detection and MPN technique for low numbers (ISO
  1                                 6888-3:2003)
      EN ISO 13366-2:2006/AC:2007   Milk - Enumeration of somatic cells - Part 2: Guidance on the   NCT             2   95 MADR
                                    operation of fluoro-opto-electronic counters (ISO 13366-2:2006)
  2
  3 EN 14122:2003/AC:2005           Foodstuffs - Determination of vitamin B1 by HPLC                   NCT          1   95 MADR
  4 EN 14152:2003/AC:2005           Foodstuffs - Determination of vitamin B2 by HPLC                   NCT          1   95 MADR
      EN ISO 520:2010               Cereals and pulses - Determination of the mass of 1000 grains      TR          13 180 MADR
  5                                 (ISO 520:2010)
      EN ISO 661:2005/AC:2006       Animal and vegetable fats and oils - Preparation of test sample    NCT          2 180 MADR
  6                                 (ISO 661:2003)
      EN ISO 8420:2002/AC:2008      Animal and vegetable fats and oils - Determination of content      NCT          3 180 MADR
  7                                 of polar compounds (ISO 8420:2002/Cor 1:2004)
      EN ISO 15304:2002/AC:2004     Animal and vegetable fats and oils - Determination of the          FCT          3 180 MADR
                                    content of trans fatty acid isomers of vegetable fats and oils -
                                    Gas chromatographic method (ISO 15304:2002/Cor.1:2003)
  8
      EN ISO 24333:2009/AC:2010     Cereals and cereal products - Sampling (ISO 24333:2009)            TR           2 180 MADR
  9
      EN 3-10:2009                  Portable fire extinguishers - Part 10: Provisions for evaluating   NCT         40 216 MAI
                                    the conformity of a portable fire extinguisher to EN 3-7
 10
      CEN/TS 54-14:2004             Fire detection and fire alarm systems - Part 14: Guidelines for    TR          76 216 MAI
                                    planning, design, installation, commissioning, use and
 11                                 maintenance
      EN 615:2009                   Fire protection - Fire extinguishing media - Specifications for    NCT         32 216 MAI
 12                                 powders (other than class D powders)
 13 EN 1147:2010                    Portable ladders for fire service use                              NCT         37 216 MAI
    EN 1568-1:2008/AC:2010          Fire extinguishing media - Foam concentrates - Part 1:             NCT          2 216 MAI
                                    Specification for medium expansion foam concentrates for
 14                                 surface application to water-immiscible liquids
      EN 1568-2:2008/AC:2010        Fire extinguishing media - Foam concentrates - Part 2:             NCT          2 216 MAI
                                    Specification for high expansion foam concentrates for surface
 15                                 application to water-immiscible liquids
      EN 1568-3:2008/AC:2010        Fire extinguishing media - Foam concentrates - Part 3:             NCT          2 216 MAI
                                    Specification for low expansion foam concentrates for surface
 16                                 application to water-immiscible liquids
      EN 1568-4:2008/AC:2010        Fire extinguishing media - Foam concentrates - Part 4:             NCT          2 216 MAI
                                    Specification for low expansion foam concentrates for surface
 17                                 application to water-miscible liquids
      CEN/TR 12101-4:2009           Smoke and heat control systems - Part 4: Installed SHEVS           NCT         51 216 MAI
 18                                 systems for smoke and heat ventilation
      EN 13565-2:2009               Fixed firefighting systems - Foam systems - Part 2: Design,        NCT         50 216 MAI
 19                                 construction and maintenance
      EN 13565-2:2009/AC:2010       Fixed firefighting systems - Foam systems - Part 2: Design,        TR           2 216 MAI
 20                                 construction and maintenance
      EN 15767-1:2009               Portable equipment for projecting extinguishing agents             NCT         17 216 MAI
                                    supplied by fire fighting pumps - Portable monitors - Part 1:
 21                                 General requirements for portable monitor assemblies
      EN 15767-2:2009               Portable equipment for projecting extinguishing agents             NCT         20 216 MAI
                                    supplied by fire fighting pumps - Portable monitors - Part 2:
 22                                 Water nozzles
      EN 15767-3:2010               Portable equipment for projecting extinguishing agents             NCT         18 216 MAI
                                    supplied by fire fighting pumps - Portable monitors - Part 3:
 23                                 Foam devices
      EN ISO 1182:2010              Reaction to fire tests for products - Non-combustibility test (ISO NCT         35 217 MAI
 24                                 1182:2010)
      EN 1364-3:2006                Fire resistance tests for non-loadbearing elements - Part 3:       NCT         28 217 MAI
                                    Curtain walling - Full configuration (complete assembly)
 25




                                                    Pagina 1 din 346
     EN 1365-4:1999                Fire resistance tests for loadbearing elements - Part 4: Columns FCT        15 217 MAI
26
     EN 1365-5:2004                Fire resistance tests for loadbearing elements - Part 5:              FCT   15 217 MAI
27                                 Balconies and walkways
     EN 1365-6:2004                Fire resistance tests for loadbearing elements - Part 6: Stairs       FCT   22 217 MAI
28
     EN 1366-4:2006+A1:2010        Fire resistance tests for service installations - Part 4: Linear      NCT   36 217 MAI
29                                 joint seals
     EN ISO 1716:2010              Reaction to fire tests for products - Determination of the gross      NCT   29 217 MAI
                                   heat of combustion (calorific value) (ISO 1716:2010)
30
     EN ISO 9239-1:2010            Reaction to fire tests for floorings - Part 1: Determination of the   NCT   26 217 MAI
                                   burning behaviour using a radiant heat source (ISO 9239-
31                                 1:2010)
     EN ISO 11925-2:2010           Reaction to fire tests - Ignitability of products subjected to direct TR    29 217 MAI
                                   impingement of flame - Part 2: Single-flame source test (ISO
32                                 11925-2:2010)
     EN ISO 11925-2:2010/AC:2011   Reaction to fire tests - Ignitability of products subjected to direct TR    4 217 MAI
                                   impingement of flame - Part 2: Single-flame source test -
                                   Technical Corrigendum 1 (ISO 11925-2:2010/Cor 1:2011)
33
     EN 13381-8:2010               Test methods for determining the contribution to the fire             NCT   81 217 MAI
                                   resistance of structural members - Part 8: Applied reactive
34                                 protection to steel members
     EN 13823:2010                 Reaction to fire tests for building products - Building products      NCT   97 217 MAI
                                   excluding floorings exposed to the thermal attack by a single
35                                 burning item
36 EN ISO 13943:2010               Fire safety - Vocabulary (ISO 13943:2008)                             NCT   54 217 MAI
   CEN/TS 14816:2008               Fixed firefighting systems - Water spray systems - Design,       NCT        29 217 MAI
37                                 installation and maintenance
   EN 15004-6:2008                 Fixed firefighting systems - Gas extinguishing systems - Part 6: NCT        12 217 MAI
                                   Physical properties and system design of gas extinguishing
                                   systems for HFC 23 extinguishant (ISO 14520-10:2005,
38                                 modified)
     EN 15080-8:2009               Extended application of results from fire resistance tests - Part     NCT   44 217 MAI
39                                 8: Beams
40 CEN/TS 15117:2005               Guidance on direct and extended application                           NCT   28 217 MAI
   EN 15254-2:2009                 Extended application of results from fire resistance tests - Non- NCT       12 217 MAI
                                   loadbearing walls - Part 2: Masonry and Gypsum Blocks
41
     EN 15254-5:2009               Extended application of results from fire resistance tests - Non- NCT       20 217 MAI
                                   loadbearing walls - Part 5: Metal sandwich panel construction
42
     EN 15269-1:2010               Extended application of test results for fire resistance and/or       NCT   11 217 MAI
                                   smoke control for door, shutter and openable window
                                   assemblies, including their elements of building hardware -
43                                 Part 1: General requirements
     EN 15269-20:2009              Extended application of test results for fire resistance and/or NCT         40 217 MAI
                                   smoke control for door, shutter and openable window
                                   assemblies, including their elements of building hardware -
                                   Part 20: Smoke control for hinged and pivoted steel, timber and
44                                 metal framed glazed doorsets
     EN 15269-7:2009               Extended application of test results for fire resistance and/or       NCT   79 217 MAI
                                   smoke control for door, shutter and openable window
                                   assemblies, including their elements of building hardware -
                                   Part 7: Fire resistance for steel sliding doorsets
45
     CEN/TS 15447:2006             Mounting and fixing in reaction to fire tests under the               NCT   40 217 MAI
46                                 Construction Products Directive
     EN 15725:2010                 Extended application reports on the fire performance of               NCT   23 217 MAI
47                                 construction products and building elements
     EN 15757:2010                 Conservation of Cultural Property - Specifications for                TR    14 380 MCC
                                   temperature and relative humidity to limit climate-induced
48                                 mechanical damage in organic hygroscopic materials
     EN 15758:2010                 Conservation of Cultural Property - Procedures and                    TR    14 380 MCC
                                   instruments for measuring temperatures of the air and the
49                                 surfaces of objects
     EN 15801:2009                 Conservation of cultural property - Test methods -                    NCT   11 380 MCC
50                                 Determination of water absorption by capillarity
     EN 15802:2009                 Conservation of cultural property - Test methods -                    NCT   11 380 MCC
51                                 Determination of static contact angle




                                                   Pagina 2 din 346
     EN 15803:2009              Conservation of cultural property - Test methods -            NCT       14 380 MCC
52                              Determination of water vapour permeability (?p)
     EN 15886:2010              Conservation of cultural property - Test methods - Colour     TR        11 380 MCC
53                              measurement of surfaces
     EN 300 135-1 v1.2.1:2008   Electromagnetic compatibility and Radio spectrum Matters      TR        35   6 MCSI
                                (ERM);Land Mobile Service;Citizens' Band (CB) radio
                                equipment;Angle-modulated Citizens' Band radio equipment
                                (PR 27 Radio Equipment);Part 1: Technical characteristics and
54                              methods of measurement
     EN 300 220-2 v2.3.1:2010   Electromagnetic compatibility and Radio spectrum Matters        NCT     20   6 MCSI
                                (ERM);Short Range Devices (SRD);Radio equipment to be
                                used in the 25 MHz to 1 000 MHz frequency range with power
                                levels ranging up to 500 mW;Part 2: Harmonized EN covering
                                essential requirements under article 3.2 of the R&TTE Directive
55
     EN 300 328 v1.7.1:2006     Electromagnetic compatibility and Radio spectrum Matters        NCT     42   6 MCSI
                                (ERM);Wideband transmission systems;Data transmission
                                equipment operating in the 2,4 GHz ISM band and using wide
                                band modulation techniques;Harmonized EN covering
                                essential requirements under article 3.2 of the R&TTE Directive
56
     EN 302 296 v1.1.1:2005     Electromagnetic compatibility and Radio spectrum Matters        NCT     24   6 MCSI
                                (ERM);Transmitting equipment for the digital television
                                broadcast service, Terrestrial (DVB-T);Harmonized EN under
                                article 3.2 of the R&TTE Directive
57
     EN 62149-4:2010            Fibre optic active components and devices - Performance         NCT     19 138 MCSI
                                standards -- Part 4: 1 300 nm fibre optic transceivers for
58                              Gigabit Ethernet application
     EN 62343-3-1:2010          Dynamic modules - Part 3-1: Performance specification           NCT     14 138 MCSI
59                              templates - Dynamic channel equalizers
     EN 60094-1:1993            Magnetic tape sound recording and reproducing systems --        FCT     26 375 MCSI
60                              Part 1: General conditions and requirements
     EN 60315-3:1999            Methods of measurement on radio receivers for various           FCT     42 375 MCSI
                                classes of emission -- Part 3: Receivers for amplitude-
61                              modulated sound-broadcasting emissions
     EN 60315-3:1999/A1:1999    Methods of measurement on radio receivers for various           FCT     18 375 MCSI
                                classes of emission -- Part 3: Receivers for amplitude-
62                              modulated sound-broadcasting emissions
     EN 14482:2010              Postal services - Trays for international letter mail - Test    TR      25 379 MCSI
63                              methods and performance requirements
     EN 200:2008                Sanitary tapware - Single taps and combination taps for water   NCT     51   52 MDRT
                                supply systems of type 1 and type 2 - General technical
64                              specification
     EN 246:2003                Sanitary tapware - General specifications for flow rate         FCT     17   52 MDRT
65                              regulators
     EN 248:2002                Sanitary tapware - General specification for electrodeposited   FCT      9   52 MDRT
66                              coatings of Ni-Cr
67 EN 512:1994                  Fibre-cement products - Pressure pipes and joints               FCT     30   52 MDRT
68 EN 512:1994/A1:2001          Fibre-cement products - Pressure pipes and joints               FCT      6   52 MDRT
     EN 806-1:2000/A1:2001      Specifications for installations inside buildings conveying water FCT    2   52 MDRT
69                              for human consumption - Part 1: General
     EN 806-2:2005              Specification for installations inside buildings conveying water NCT    49   52 MDRT
70                              for human consumption - Part 2: Design
     EN 806-3:2006              Specifications for installations inside buildings conveying water NCT   14   52 MDRT
                                for human consumption - Part 3: Pipe sizing - Simplified method
71
     EN 806-4:2010              Specifications for installations inside buildings conveying water NCT   53   52 MDRT
72                              for human consumption - Part 4: Installation
73 EN 816:1996                  Sanitary tapware - Automatic shut-off valves PN 10                FCT   40   52 MDRT
   EN 817:2008                  Sanitary tapware - Mechanical mixing valves (PN 10) - General NCT       50   52 MDRT
74                              technical specifications
   EN 1111:1998                 Sanitary tapware - Thermostatic mixing valves (PN 10) -          FCT    54   52 MDRT
75                              General technical specification
   EN 1112:2008                 Sanitary tapware - Shower outlets for sanitary tapware for water NCT    21   52 MDRT
                                supply systems of type 1 and type 2 - General technical
76                              specification
     EN 1113:2008               Sanitary tapware - Shower hoses for sanitary tapware for water NCT      23   52 MDRT
                                supply systems of type 1 and type 2 - General technical
77                              specification




                                               Pagina 3 din 346
      EN 1213:1999              Building valves - Copper alloy stopvalves for potable water        FCT   18   52 MDRT
 78                             supply in buildings - Tests and requirements
      EN 1286:1999              Sanitary tapware - Low pressure mechanical mixing valves -         FCT   50   52 MDRT
 79                             General technical specification
      EN 1287:1999              Sanitary tapware - Low pressure thermostatic mixing valves -       FCT   48   52 MDRT
 80                             General technical specifications
      EN 1420-1:1999            Influence of organic materials on water intended for human         FCT   19   52 MDRT
                                consumption - Determination of odour and flavour assessment
                                of water in piping systems - Part 1: Test method
 81
      EN 1444:2000              Fibre-cement pipelines - Guide for laying and on-site work         FCT   39   52 MDRT
 82                             practices
      EN 1487:2000              Building valves - Hydraulic safety groups - Tests and              FCT   23   52 MDRT
 83                             requirements
      EN 1488:2000              Building valves - Expansion groups - Tests and requirements        FCT   22   52 MDRT
 84
      EN 1489:2000              Building valves - Pressure safety valves - Tests and               FCT   17   52 MDRT
 85                             requirements
      EN 1490:2000              Building valves - Combined temperature and pressure relief         FCT   26   52 MDRT
 86                             valves - Tests and requirements
      EN 1491:2000              Building valves - Expansion valves - Tests and requirements        FCT   16   52 MDRT
 87
      EN 1567:1999              Building valves - Water pressure reducing valves and               FCT   17   52 MDRT
                                combination water pressure reducing valves - Requirements
 88                             and tests
      EN 1717:2000              Protection against pollution of potable water in water             FCT   51   52 MDRT
                                installations and general requirements of devices to prevent
 89                             pollution by backflow
      EN 12541:2002             Sanitary tapware - Pressure flushing valves and automatic          FCT   34   52 MDRT
 90                             closing urinal valves PN 10
      EN 12729:2002             Devices to prevent pollution by backflow of potable water -        FCT   32   52 MDRT
                                Controllable backflow preventer with reduced pressure zone -
 91                             Family B - Type A
      EN 12873-1:2003           Influence of materials on water intended for human                 FCT   31   52 MDRT
                                consumption - Influence due to migration - Part 1: Test method
                                for non-metallic and non-cementitious factory made products
 92
      EN 12873-2:2005           Influence of materials on water intended for human                 NCT   28   52 MDRT
                                consumption - Influence due to migration - Part 2: Test method
                                for non-metallic and non-cementitious site-applied materials
 93
      EN 12873-3:2006           Influence of materials on water intended for human                 NCT   13   52 MDRT
                                consumption - Influence due to migration - Part 3: Test method
 94                             for ion exchange and adsorbent resins
      EN 12873-4:2006           Influence of materials on water intended for human                 NCT   17   52 MDRT
                                consumption - Influence due to migration - Part 4: Test method
 95                             for water treatment membranes
      EN 12897:2006             Water supply - Specification for indirectly heated unvented        NCT   25   52 MDRT
 96                             (closed) storage water heaters
      EN 13052-1:2001           Influence of materials on water intended for human                 FCT   21   52 MDRT
                                consumption - Organic materials - Determination of colour and
                                turbidity of water in piping systems - Part 1: Test method
 97
      EN 13076:2003             Devices to prevent pollution by backflow of potable water -       FCT    10   52 MDRT
 98                             Unrestricted air gap-Family A - Type A
      EN 13077:2008             Devices to prevent pollution by backflow of potable water - Air NCT      15   52 MDRT
                                gap with non-circular overflow (unrestricted) - Family A - Type B
 99
      EN 13078:2003             Devices to prevent pollution by backflow of potable water - Air    FCT   13   52 MDRT
                                gap with submerged feed incorporating air inlet plus overflow -
100                             Family A, type C
      EN 13079:2003             Devices to prevent pollution by backflow of potable water - Air    FCT   10   52 MDRT
101                             gap with injector - Family A - Type D
      EN 13433:2006             Devices to prevent pollution by backflow of potable water -        NCT   28   52 MDRT
                                Mechanical disconnector, direct actuated - Family G, type A
102
      EN 13434:2006             Devices to prevent pollution by backflow of potable water -    NCT       28   52 MDRT
                                Mechanical disconnector, hydraulic actuated - Family G, type B
103
      EN 13443-1:2002+A1:2007   Water conditioning equipment inside buildings - Mechanical         NCT   26   52 MDRT
                                filters - Part 1: Particle rating 80 µm to 150 µm - Requirements
104                             for performances, safety and testing



                                               Pagina 4 din 346
      EN 13443-2:2005+A1:2007   Water conditioning equipment inside buildings - Mechanical        NCT   57   52 MDRT
                                filters - Part 2: Particle rating 1 µm to less than 80 µm -
                                Requirements for performance, safety and testing
105
      EN 13828:2003             Building valves - Manually operated copper alloy and stainless    FCT   21   52 MDRT
                                steel ball valves for potable water supply in buildings -Tests
106                             and requirements
      EN 13959:2004             Anti-pollution check valves - DN 6 to DN 250 inclusive family E, NCT    31   52 MDRT
107                             type A, B, C and D
      EN 14095:2003             Water conditioning equipment inside buildings - Electrolytic     FCT    16   52 MDRT
                                treatment systems with aluminium anodes - Requirements for
108                             performance, safety and testing
109 EN 14124:2004               Inlet valves for flushing cisterns with internal overflow         NCT   20   52 MDRT
    EN 14367:2005               Non controllable backflow preventer with different pressure       NCT   32   52 MDRT
110                             zones - Family C, type A
    EN 14395-1:2004             Influence of organic materials on water intended for human        NCT   21   52 MDRT
                                consumption - Organoleptic assessment of water in storage
111                             systems - Part 1: Test method
      EN 14451:2005             Devices to prevent pollution by backflow of potable water - In-   NCT   21   52 MDRT
                                line anti-vacuum valves DN 8 to DN 80 - Family D, type A
112
      EN 14452:2005             Devices to prevent pollution by backflow of potable water - Pipe NCT    16   52 MDRT
                                interrupter with atmospheric vent and moving element DN 10 to
113                             DN 20 - Family D, type B
      EN 14453:2005             Devices to prevent pollution by backflow of potable water - Pipe NCT    16   52 MDRT
                                interrupter with permanent atmospheric vent DN 10 to DN 20 -
114                             Family D, type C
      EN 14454:2005             Devices to prevent pollution by backflow of potable water -       NCT   24   52 MDRT
                                Hose union backflow preventer DN 15 to DN 32 - Family H,
115                             type A
      EN 14455:2005             Devices to prevent pollution by backflow of potable water -     NCT     22   52 MDRT
                                Presssurised air inlet valves DN 15 to DN 50 - Family L, type A
116                             and type B
      EN 14506:2005             Devices to prevent pollution by backflow of potable water -       NCT   22   52 MDRT
117                             Automatic diverter - Family H, type C
      EN 14622:2005             Devices to prevent pollution by backflow of potable water - Air   NCT   10   52 MDRT
                                gap with circular overflow (restricted) - Family A, type F
118
      EN 14623:2005             Devices to prevent pollution by backflow of potable water - Air   NCT   10   52 MDRT
                                gaps with minimum circular overflow (verified by test or
119                             measurement) - Family A, type G
      EN 14652:2005+A1:2007     Water conditioning equipment inside buildings - Membrane      NCT       61   52 MDRT
                                separation devices - Requirements for performance, safety and
120                             testing
      EN 14718:2006             Influence of organic materials on water intended for human        NCT   17   52 MDRT
                                consumption - Determination of the chlorine demand - Test
121                             method
      EN 14743:2005+A1:2007     Water conditioning equipment inside buildings - Softeners -       NCT   23   52 MDRT
                                Requirements for performance, safety and testing
122
      EN 14812:2005+A1:2007     Water conditioning equipment inside buildings - Chemical          NCT   20   52 MDRT
                                dosing systems - Pre-set dosing systems - Requirements for
123                             performance, safety and testing
      EN 14897:2006+A1:2007     Water conditioning equipment inside buildings - Devices using     NCT   30   52 MDRT
                                mercury low-pressure ultraviolet radiators - Requirements for
124                             performance, safety and testing
      EN 14898:2006+A1:2007     Water conditioning equipment inside buildings - Active media      NCT   31   52 MDRT
                                filters - Requirements for performance, safety and testing
125
      EN 14944-1:2006           Influence of cementitious products on water intended for      NCT       47   52 MDRT
                                human consumption - Test methods - Part 1: Influence of
                                factory made cementitious products on organoleptic parameters
126
      EN 14944-3:2007           Influence of cementitious products on water intended for          NCT   53   52 MDRT
                                human consumption - Test methods - Part 3: Migration of
127                             substances from factory-made cementititous products
      EN 15091:2006             Sanitary tapware - Electronic opening and closing sanitary        NCT   47   52 MDRT
128                             tapware
      EN 15091:2006/AC:2007     Sanitary tapware - Electronic opening and closing sanitary        NCT    2   52 MDRT
129                             tapware




                                                Pagina 5 din 346
      EN 15092:2008                 Building valves - Inline hot water supply tempering valves -         NCT   30   52 MDRT
130                                 Tests and requirements
      EN 15096:2008                 Devices to prevent pollution by backflow of potable water -          NCT   22   52 MDRT
                                    Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive
                                    Family H, type B and type D - General technical specification
131
      EN 15161:2006                 Water conditioning equipment inside buildings - Installation,        NCT   11   52 MDRT
132                                 operation, maintenance and repair
      EN 15219:2006+A1:2007         Water conditioning equipment inside buildings - Nitrate              NCT   25   52 MDRT
                                    removal devices - Requirements for performance, safety and
133                                 testing
      EN 15664-1:2008               Influence of metallic materials on water intended for human          NCT   31   52 MDRT
                                    consumption - Dynamic rig test for assessment of metal
134                                 release - Part 1: Design and operation
      EN 15664-2:2010               Influence of metallic materials on water intended for human          NCT    7   52 MDRT
                                    consumption - Dynamic rig test for assessment of metal
135                                 release - Part 2: Test waters
      EN 15848:2010                 Water conditioning equipment inside buildings - Adjustable           NCT   15   52 MDRT
                                    chemical dosing systems - Requirements for performance,
136                                 safety and testing
137 EN 459-2:2010                   Building lime - Part 2: Test methods                                 NCT   64 111 MDRT
    EN 539-2:2006/AC:2008           Clay roofing tiles for discontinuous laying - Determination of       NCT    2 113 MDRT
                                    physical characteristics - Part 2: Test for frost resistance
138
      EN 1110:2010                  Flexible sheets for waterproofing - Bitumen sheets for roof          TR    10 113 MDRT
                                    waterproofing - Determination of flow resistance at elevated
139                                 temperature
      EN 12317-2:2010               Flexible sheets for waterproofing - Determination of shear           TR     8 113 MDRT
                                    resistance of joints - Part 2: Plastic and rubber sheets for roof
140                                 waterproofing
      EN 14224:2010                 Flexible sheets for waterproofing - Waterproofing of concrete        NCT   12 113 MDRT
                                    bridge decks and other concrete surfaces trafficable by
                                    vehicles - Determination of crack bridging ability
141
      EN ISO 10545-7:1998/AC:1999   Ceramic tiles - Part 7: Determination of resistance to surface       FCT    2 114 MDRT
142                                 abrasion for glazed tiles (ISO 10545-7:1996)
      EN 12002:2008                 Adhesives for tiles - Determination of transverse deformation        NCT    9 114 MDRT
143                                 for cementitious adhesives and grouts
144 EN 12808-4:2009/AC:2011         Grouts for tiles - Part 4: Determination of shrinkage                TR     2 114 MDRT
    EN 12758:2011                   Glass in building - Glazing and airborne sound insulation -          NCT   19 122 MDRT
145                                 Product descriptions and determination of properties
    EN 50110-2:2010                 Operation of electrical installations -- Part 2: National annexes    TR    24 136 MDRT
146
    HD 60364-4-43:2010              Low-voltage electrical installations -- Part 4-43: Protection for    TR    28 136 MDRT
147                                 safety - Protection against overcurrent
    HD 60364-4-444:2010             Low-voltage electrical installations -- Part 4-444: Protection for   NCT   37 136 MDRT
                                    safety - Protection against voltage disturbances and
148                                 electromagnetic disturbances
      HD 60364-5-51:2009            Electrical installations of buildings -- Part 5-51: Selection and NCT      32 136 MDRT
149                                 erection of electrical equipment - Common rules
      HD 60364-5-52:2011            Low-voltage electrical installations -- Part 5-52: Selection and  TR       22 136 MDRT
150                                 erection of electrical equipment - Wiring systems
      HD 60364-7-702:2010           Low-voltage electrical installations -- Part 7-702: Requirements TR        23 136 MDRT
                                    for special installations or locations - Swimming pools and
151                                 fountains
      HD 60364-7-708:2009           Low-voltage electrical installations -- Part 7-708: Requirements NCT       12 136 MDRT
                                    for special installations or locations - Caravan parks, camping
152                                 parks and similar locations
      HD 60364-7-709:2009           Low-voltage electrical installations -- Part 7-709: Requirements NCT       16 136 MDRT
                                    for special installations or locations - Marinas and similar
153                                 locations
      HD 60364-7-721:2009           Low-voltage electrical installations -- Part 7-721: Requirements NCT       20 136 MDRT
                                    for special installations or locations - Electrical installations in
154                                 caravans and motor caravans
      HD 60364-7-729:2009           Low-voltage electrical installations -- Part 7-729: Requirements NCT       18 136 MDRT
                                    for special installations or locations - Operating or maintenance
155                                 gangways
      EN 476:2011                   General requirements for components used in drains and               NCT   25 186 MDRT
156                                 sewers
157 EN 1253-1:2003                  Gullies for buildings - Part 1: Requirements                         FCT   15 186 MDRT
158 EN 1253-2:2003                  Gullies for buildings - Part 2: Test methods                         FCT   20 186 MDRT




                                                    Pagina 6 din 346
159 EN 1253-3:1999                Gullies for buildings - Part 3: Quality control                    FCT   8 186 MDRT
    EN 1295-1:1997                Structural design of buried pipelines under various conditions     FCT   34 186 MDRT
160                               of loading - Part 1: General requirements
    EN 12056-1:2000               Gravity drainage systems inside buildings - Part 1: General and    FCT   20 186 MDRT
161                               performance requirements
    EN 12056-2:2000               Gravity drainage systems inside buildings - Part 2: Sanitary       FCT   41 186 MDRT
162                               pipework, layout and calculation
    EN 12056-3:2000               Gravity drainage systems inside buildings - Part 3: Roof           FCT   47 186 MDRT
163                               drainage, layout and calculation
    EN 12056-4:2000               Gravity drainage systems inside buildings - Part 4: Wastewater     FCT   19 186 MDRT
164                               lifting plants - Layout and calculation
    EN 12056-5:2000               Gravity drainage systems inside buildings - Part 5: Installation   FCT   19 186 MDRT
                                  and testing, instructions for operation, maintenance and use
165
      EN 1317-1:2010              Road restraint systems - Part 1: Terminology and general           NCT   35 187 MDRT
166                               criteria for test methods
      EN 1317-2:2010              Road restraint systems - Part 2: Performance classes, impact       NCT   28 187 MDRT
                                  test acceptance criteria and test methods for safety barriers
167                               including vehicle parapets
      EN 1317-3:2010              Road restraint systems - Part 3: Performance classes, impact       NCT   25 187 MDRT
                                  test acceptance criteria and test methods for crash cushions
168
      EN 1794-1:2011              Road traffic noise reducing devices - Non-acoustic                 NCT   27 187 MDRT
                                  performance - Part 1: Mechanical performance and stability
169                               requirements
      EN 1794-2:2011              Road traffic noise reducing devices - Non-acoustic                 NCT   26 187 MDRT
                                  performance - Part 2: General safety and environmental
170                               requirements
171 SR EN 12676-1:2002/C91:2011                                                                      EL    1 187 MDRT
    EN 12697-10:2001/AC:2007      Bituminous mixtures - Test methods for hot mix asphalt - Part      NCT   1 187 MDRT
172                               10: Compactibility
    EN 12697-11:2005/AC:2007      Bituminous mixtures - Test methods for hot mix asphalt - Part      NCT   1 187 MDRT
                                  11: Determination of the affinity between aggregate and
173                               bitumen
      EN 13108-20:2006/AC:2008    Bituminous mixtures - Material specifications - Part 20: Type    NCT     2 187 MDRT
174                               Testing
      EN 13108-21:2006/AC:2008    Bituminous mixtures - Material specifications - Part 21: Factory NCT     8 187 MDRT
175                               Production Control
176 EN 13285:2010                 Unbound mixtures - Specifications                                TR      22 187 MDRT
    EN 13286-2:2010               Unbound and hydraulically bound mixtures - Part 2: Test            TR    29 187 MDRT
                                  methods for laboratory reference density and water content -
177                               Proctor compaction
      EN 13032-2:2004/AC:2007     Light and lighting - Measurement and presentation of            NCT      2 240 MDRT
                                  photometric data of lamps and luminaires - Part 2: Presentation
178                               of data for indoor and outdoor work places
179 CEN/TR 13201-1:2004           Road lighting - Part 1: Selection of lighting classes              TR    29 240 MDRT
    EN 15193:2007/AC:2010         Energy performance of buildings - Energy requirements for          TR    3 240 MDRT
180                               lighting
    EN ISO 3382-1:2009            Acoustics - Measurement of room acoustic parameters - Part         NCT   29 276 MDRT
181                               1: Performance spaces (ISO 3382-1:2009)
    EN ISO 10140-1:2010           Acoustics - Laboratory measurement of sound insulation of          NCT   35 276 MDRT
                                  building elements - Part 1: Application rules for specific
182                               products (ISO 10140-1:2010)
      EN ISO 10140-2:2010         Acoustics - Laboratory measurement of sound insulation of          TR    16 276 MDRT
                                  building elements - Part 2: Measurement of airborne sound
183                               insulation (ISO 10140-2:2010)
      EN ISO 10140-3:2010         Acoustics - Laboratory measurement of sound insulation of          TR    15 276 MDRT
                                  building elements - Part 3: Measurement of impact sound
184                               insulation (ISO 10140-3:2010)
      EN ISO 10140-4:2010         Acoustics - Laboratory measurement of sound insulation of          TR    15 276 MDRT
                                  building elements - Part 4: Measurement procedures and
185                               requirements (ISO 10140-4:2010)
      EN ISO 10140-5:2010         Acoustics - Laboratory measurement of sound insulation of          NCT   38 276 MDRT
                                  building elements - Part 5: Requirements for test facilities and
186                               equipment (ISO 10140-5:2010)
      EN ISO 10848-4:2010         Acoustics - Laboratory measurement of the flanking                 TR    12 276 MDRT
                                  transmission of airborne and impact sound between adjoining
                                  rooms - Part 4: Application to junctions with at least one heavy
187                               element (ISO 10848-4:2010)




                                                  Pagina 7 din 346
      EN ISO 12567-1:2010           Thermal performance of windows and doors - Determination of        NCT   56 281 MDRT
                                    thermal transmittance by the hot-box method - Part 1:
                                    Complete windows and doors (ISO 12567-1:2010)
188
      EN ISO 12567-1:2010/AC:2010   Thermal performance of windows and doors - Determination of        TR     5 281 MDRT
                                    thermal transmittance by the hot-box method - Part 1:
                                    Complete windows and doors - Technical Corrigendum 1 (ISO
189                                 12567-1:2010/Cor 1:2010)
      EN ISO 12572:2001             Hygrothermal performance of building materials and products -      FCT   32 281 MDRT
                                    Determination of water vapour transmission properties (ISO
190                                 12572:2001)
      EN 13363-                     Solar protection devices combined with glazing - Calculation of NCT       2 281 MDRT
      1:2003+A1:2007/AC:2008        solar and light transmittance - Part 1: Simplified method
191
      EN 13829:2000                 Thermal performance of buildings - Determination of air            FCT   23 281 MDRT
                                    permeability of buildings - Fan pressurization method (ISO
192                                 9972:1996, modified)
      EN 14114:2002                 Hygrothermal performance of building equipment and industrial FCT        18 281 MDRT
                                    installations - Calculation of water vapour diffusion - Cold pipe
193                                 insulation systems
      CEN/TR 15615:2008             Explanation of the general relationship between various            TR    60 281 MDRT
                                    European standards and the Energy Performance of Buildings
194                                 Directive (EPBD) - Umbrella Document
      EN ISO 15927-2:2009           Hygrothermal performance of buildings - Calculation and            NCT   14 281 MDRT
                                    presentation of climatic data - Part 2: Hourly data for design
195                                 cooling load (ISO 15927-2:2009)
      EN ISO 15927-3:2009           Hygrothermal performance of buildings - Calculation and            NCT   23 281 MDRT
                                    presentation of climatic data - Part 3: Calculation of a driving
                                    rain index for vertical surfaces from hourly wind and rain data
196                                 (ISO 15927-3:2009)
      EN ISO 23993:2010             Thermal insulation products for building equipment and             NCT   34 281 MDRT
                                    industrial installations - Determination of design thermal
                                    conductivity (ISO 23993:2008, Corrected version 2009-10-01)
197
      EN 253:2009                   District heating pipes - Preinsulated bonded pipe systems for      NCT   49 302 MDRT
                                    directly buried hot water networks - Pipe assembly of steel
                                    service pipe, polyurethane thermal insulation and outer casing
198                                 of polyethylene
      EN 1264-2:2008                Water based surface embedded heating and cooling systems - NCT           45 302 MDRT
                                    Part 2: Floor heating: Prove methods for the determination of
                                    the thermal output using calculation and test methods
199
      EN 1264-3:2009                Water based surface embedded heating and cooling systems - NCT           19 302 MDRT
200                                 Part 3: Dimensioning
      EN 1264-4:2009                Water based surface embedded heating and cooling systems - NCT           14 302 MDRT
201                                 Part 4: Installation
      EN 1264-5:2008                Water based surface embedded heating and cooling systems - NCT           12 302 MDRT
                                    Part 5: Heating and cooling surfaces embedded in floors,
                                    ceilings and walls - Determination of the thermal output
202
      CR 1752:1998                  Ventilation for buildings - Design criteria for the indoor         FCT   73 302 MDRT
203                                 environment
      EN ISO 5801:2008              Industrial fans - Performance testing using standardized           NCT   239 302 MDRT
204                                 airways (ISO 5801:2007 including Cor 1:2008)
      EN ISO 5802:2008              Industrial fans - Performance testing in situ (ISO 5802:2001)      NCT   93 302 MDRT
205
      EN ISO 12499:2008             Industrial fans - Mechanical safety of fans - Guarding (ISO        NCT   19 302 MDRT
206                                 12499:1999)
      EN 12599:2000/AC:2002         Ventilation for buildings - Test procedures and measuring          FCT    1 302 MDRT
                                    methods for handing over installed ventilation and air
207                                 conditioning systems
      EN 12792:2003                 Ventilation for buildings - Symbols, terminology and graphical     FCT   50 302 MDRT
208                                 symbols
      EN 12975-1:2006+A1:2010       Thermal solar systems and components - Solar collectors -          NCT   15 302 MDRT
209                                 Part 1: General requirements
      EN 13141-2:2004               Ventilation for buildings - Performance testing of                 FCT   20 302 MDRT
                                    components/products for residential ventilation - Part 2:
210                                 Exhaust and supply air terminal devices
      EN 13141-2:2010               Ventilation for buildings - Performance testing of                 NCT   23 302 MDRT
                                    components/products for residential ventilation - Part 2:
211                                 Exhaust and supply air terminal devices




                                                    Pagina 8 din 346
      EN 13141-7:2004          Ventilation for buildings - Performance testing of                 FCT   21 302 MDRT
                               components/products for residential ventilation - Part 7:
                               Performance testing of a mechanical supply and exhaust
                               ventilation units (including heat recovery) for mechanical
212                            ventilation systems intended for single family dwellings
      EN 13141-7:2010          Ventilation for buildings - Performance testing of                 NCT   36 302 MDRT
                               components/products for residential ventilation - Part 7:
                               Performance testing of a mechanical supply and exhaust
                               ventilation units (including heat recovery) for mechanical
213                            ventilation systems intended for single family dwellings
      EN 13142:2004            Ventilation for buildings - Components/products for residential    FCT   13 302 MDRT
                               ventilation - Required and optional performance characteristics
214
      EN ISO 13349:2010        Fans - Vocabulary and definitions of categories (ISO               NCT   49 302 MDRT
215                            13349:2010)
      EN ISO 13350:2008        Industrial fans - Performance testing of jet fans (ISO             NCT   32 302 MDRT
216                            13350:1999)
      EN 13941:2009+A1:2010    Design and installation of preinsulated bonded pipe systems        NCT   125 302 MDRT
217                            for district heating
      EN 14037-2:2003          Ceiling mounted radiant panels supplied with water at              FCT   32 302 MDRT
                               temperature below 120 °C - Part 2: Test method for thermal
218                            output
      EN 14037-3:2003          Ceiling mounted radiant panels supplied with water at              FCT    8 302 MDRT
                               temperature below 120 °C - Part 3: Rating method and
219                            evaluation of radiant thermal output
      EN 14419:2009            District heating pipes - Preinsulated bonded pipe systems for      NCT   29 302 MDRT
                               directly buried hot water networks - Surveillance systems
220
      EN 15241:2007/AC:2011    Ventilation for buildings - Calculation methods for energy      TR        2 302 MDRT
221                            losses due to ventilation and infiltration in buildings
      EN 15316-4-7:2008        Heating systems in buildings - Method for calculation of system NCT      53 302 MDRT
                               energy requirements and system efficiencies - Part 4-7: Space
                               heating generation systems, biomass combustion systems
222
223 EN 15650:2010              Ventilation for buildings - Fire dampers                           NCT   33 302 MDRT
    EN 15665:2009              Ventilation for buildings - Determining performance criteria for   NCT   36 302 MDRT
224                            residential ventilation systems
    EN 480-11:2005             Admixtures for concrete, mortar and grout - Test methods -         NCT   19 321 MDRT
                               Part 11: Determination of air void characteristics in hardened
225                            concrete
      EN 480-12:2005           Admixtures for concrete, mortar and grout - Test methods -         NCT    9 321 MDRT
                               Part 12: Determination of the alkali content of admixtures
226
      EN 480-4:2005            Admixtures for concrete, mortar and grout - Test methods -         NCT    5 321 MDRT
227                            Part 4: Determination of bleeding of concrete
      EN 480-5:2005            Admixtures for concrete, mortar and grout - Test methods -         NCT    6 321 MDRT
228                            Part 5: Determination of capillary absorption
      EN 933-4:2008            Tests for geometrical properties of aggregates - Part 4:           NCT   11 321 MDRT
229                            Determination of particle shape - Shape index
      EN 1097-1:2011           Tests for mechanical and physical properties of aggregates -       NCT   13 321 MDRT
                               Part 1: Determination of the resistance to wear (micro-Deval)
230
      EN 1097-2:2010           Tests for mechanical and physical properties of aggregates -       NCT   34 321 MDRT
                               Part 2: Methods for the determination of resistance to
231                            fragmentation
      EN 1097-6:2000/AC:2002   Tests for mechanical and physical properties of aggregates -       FCT    1 321 MDRT
                               Part 6: Determination of particle density and water absorption
232
      EN 1367-3:2001/AC:2004   Tests for thermal and weathering properties of aggregates -        FCT    2 321 MDRT
233                            Part 3 : Boiling test for Sonnenbrand basalt
      EN 1367-5:2011           Tests for thermal and weathering properties of aggregates -        NCT    8 321 MDRT
                               Part 5: Determination of resistance to thermal shock
234
      EN 15304:2010            Determination of the freeze-thaw resistance of autoclaved          NCT   19 321 MDRT
235                            aerated concrete
      EN 408:2010              Timber structures - Structural timber and glued laminated          NCT   36 326 MDRT
                               timber - Determination of some physical and mechanical
236                            properties
      EN 409:2009              Timber structures - Test methods - Determination of the yield      NCT   10 326 MDRT
237                            moment of dowel type fasteners




                                               Pagina 9 din 346
      EN 14081-2:2010                Timber structures - Strength graded structural timber with           NCT   21 326 MDRT
                                     rectangular cross section - Part 2: Machine grading; additional
238                                  requirements for initial type testing
      EN ISO 8394-1:2010             Building construction - Jointing products - Part 1: Determination NCT       8 335 MDRT
                                     of extrudability of sealants (ISO 8394-1:2010)
239
      EN ISO 8394-2:2010             Building construction - Jointing products - Part 2: Determination NCT      11 335 MDRT
                                     of extrudability of sealants using standardized apparatus (ISO
240                                  8394-2:2010)
      EN ISO 8394-2:2010/AC:2011     Building construction - Jointing products - Part 2: Determination TR        2 335 MDRT
                                     of extrudability of sealants using standardized apparatus (ISO
241                                  8394-2:2010)
      EN 1990:2002/A1:2005/AC:2010   Eurocode - Basis of structural design                                NCT   21 343 MDRT
242
243 SR EN 1991-1-7:2007/NB:2011                                                                           EL    17 343 MDRT
    CEN/TS 1992-4-1:2009             Design of fastenings for use in concrete - Part 4-1: General         TR    64 343 MDRT
244
    CEN/TS 1992-4-2:2009             Design of fastenings for use in concrete - Part 4-2: Headed          TR    31 343 MDRT
245                                  Fasteners
    CEN/TS 1992-4-3:2009             Design of fastenings for use in concrete - Part 4-3: Anchor          TR    28 343 MDRT
246                                  channels
    CEN/TS 1992-4-4:2009             Design of fastenings for use in concrete - Part 4-4: Post-           TR    25 343 MDRT
247                                  installed fasteners - Mechanical systems
    CEN/TS 1992-4-5:2009             Design of fastenings for use in concrete - Part 4-5: Post-           TR    24 343 MDRT
248                                  installed fasteners - Chemical systems
    EN 1992-1-1:2004/AC:2010         Eurocode 2: Design of concrete structures - Part 1-1: General        TR    23 343 MDRT
249                                  rules and rules for buildings
    SR EN 1993-1-12:2007/NA:2011                                                                          EL    10 343 MDRT
250
251 SR EN 1993-1-6:2007/NA:2011                                                                           EL    10 343 MDRT
252 SR EN 1993-1-7:2007/NA:2011                                                                           EL    10 343 MDRT
253 SR EN 1993-4-1:2007/NA:2011                                                                           EL    10 343 MDRT
254 SR EN 1993-4-2:2007/NA:2011                                                                           EL    10 343 MDRT
255 SR EN 1993-4-3:2007/NA:2011                                                                           EL    10 343 MDRT
256 SR EN 1993-5:2007/NA:2011                                                                             EL    10 343 MDRT
257 SR EN 1993-6:2007/NA:2011                                                                             EL    10 343 MDRT
258 SR EN 1996-1-2:2005/NA:2011                                                                           EL    10 343 MDRT
    EN 1996-1-2:2005/AC:2010         Eurocode 6 - Design of masonry structures - Part 1-2: General        TR     9 343 MDRT
259                                  rules - Structural fire design
    EN 1997-2:2007/AC:2010           Eurocode 7 - Geotechnical design - Part 2: Ground                    NCT    8 343 MDRT
260                                  investigation and testing
261 SR EN 1999-1-3:2007/NA:2011                                                                           EL    10 343 MDRT
262 SR EN 1999-1-4:2007/NA:2011                                                                           EL    10 343 MDRT
    EN 50164-3:2006/A1:2009          Lightning Protection Components (LPC) -- Part 3:                     NCT    5 346 MDRT
263                                  Requirements for isolating spark gaps
    EN 50164-5:2009                  Lightning Protection Components (LPC) -- Part 5:                     NCT    9 346 MDRT
                                     Requirements for earth electrode inspection housings and
264                                  earth electrode seals
      EN 50164-6:2009                Lightning Protection Components (LPC) -- Part 6:                NCT        13 346 MDRT
265                                  Requirements for lightning strike counters
      EN 50468:2009                  Resistibility requirements to overvoltages and overcurrents due NCT        11 346 MDRT
                                     to lightning for equipment having telecommunication ports
266
267 EN 62305-1:2011                  Protection against lightning -- Part 1: General principles           NCT   70 346 MDRT
    EN 62305-3:2011                  Protection against lightning -- Part 3: Physical damage to           TR    160 346 MDRT
268                                  structures and life hazard
    EN 62305-4:2011                  Protection against lightning -- Part 4: Electrical and electronic    NCT   91 346 MDRT
269                                  systems within structures
    EN 62561-4:2011                  Lightning protection system components (LPSC) -- Part 4:             TR    25 346 MDRT
270                                  Requirements for conductor fasteners
271 EN 1859:2009                     Chimneys - Metal chimneys - Test methods                             NCT   45 347 MDRT
      EN 15287-1:2007+A1:2010        Chimneys - Design, installation and commissioning of                 TR    79 347 MDRT
                                     chimneys - Part 1: Chimneys for non-roomsealed heating
272                                  appliances
      EN ISO 12956:2010              Geotextiles and geotextile-related products - Determination of       NCT   13 364 MDRT
                                     the characteristic opening size (ISO 12956:2010)
273
      EN 13719:2002/AC:2005          Geotextiles and geotextile-related products - Determination of       NCT    1 364 MDRT
                                     the long term protection efficiency of geotextiles in contact with
274                                  geosynthetic barriers



                                                    Pagina 10 din 346
      EN 60034-18-1:2010          Rotating electrical machines -- Part 18-1: Functional evaluation NCT      21   1 MECMA
275                               of insulation systems - General guidelines
      EN 60216-2:2005             Electrical insulating materials - Thermal endurance properties -- NCT     18   5 MECMA
                                   Part 2: Determination of thermal endurance properties of
                                  electrical insulating materials - Choice of test criteria
276
      EN 60216-3:2006             Electrical insulating materials - Thermal endurance properties -- NCT     53   5 MECMA
                                   Part 3: Instructions for calculating thermal endurance
277                               characteristics
      EN 60455-3-1:2003           Resin based reactive compounds used for electrical insulation - FCT        8   5 MECMA
                                  - Part 3: Specifications for individual materials -- Sheet 1:
278                               Unfilled epoxy resinous compounds
      EN 60455-3-2:2003           Resin based reactive compounds used for electrical insulation - FCT        8   5 MECMA
                                  - Part 3: Specifications for individual materials -- Sheet 2:
279                               Quartz filled epoxy resinous compounds
      EN 60455-3-3:2003           Resin based reactive compounds used for electrical insulation - FCT        8   5 MECMA
                                  - Part 3: Specifications for individual materials -- Sheet 3:
280                               Unfilled polyurethane compounds
      EN 60455-3-4:2003           Resin based reactive compounds used for electrical insulation - FCT        8   5 MECMA
                                  - Part 3: Specifications for individual materials -- Sheet 4: Filled
281                               polyurethane compounds
      EN 60455-3-5:2006           Resin based reactive compounds used for electrical insulation - NCT       14   5 MECMA
                                  - Part 3: Specifications for individual materials -- Sheet 5:
                                  Unsaturated polyester based impregnating resins
282
      EN 60684-1:2003             Flexible insulating sleeving -- Part 1: Definitions and general   FCT     11   5 MECMA
283                               requirements
      EN 61006:2004               Electrical insulating materials - Methods of test for the         FCT     26   5 MECMA
284                               determination of the glass transition temperature
      EN 61212-1:2006             Insulating materials - Industrial rigid round laminated tubes and NCT      9   5 MECMA
                                  rods based on thermosetting resins for electrical purposes --
                                  Part 1: Definitions, designations and general requirements
285
      EN 61212-2:2006             Insulating materials - Industrial rigid round laminated tubes and NCT     26   5 MECMA
                                  rods based on thermosetting resins for electrical purposes --
286                               Part 2: Methods of test
      EN 60445:2010               Basic and safety principles for man-machine interface, marking TR         28   7 MECMA
                                  and identification - Identification of equipment terminals,
287                               conductor terminations and conductors
      EN 60060-1:2010             High-voltage test techniques -- Part 1: General definitions and     TR    77   8 MECMA
288                               test requirements
289 SR EN 60439-1:2001/C91:2011                                                                       EL     1   9 MECMA
    EN 60747-16-3:2002            Semiconductor devices -- Part 16-3: Microwave integrated            FCT   43   17 MECMA
290                               circuits - Frequency converters
    EN 60749-34:2010              Semiconductor devices - Mechanical and climatic test methods        TR    14   17 MECMA
291                               -- Part 34: Power cycling
    EN 62374-1:2010               Semiconductor devices -- Part 1: Time-dependent dielectric          TR    18   17 MECMA
292                               breakdown (TDDB) test for inter-metal layers
    EN 61019-2:2005               Surface acoustic wave (SAW) resonators -- Part 2: Guide to          NCT   28   18 MECMA
293                               the use
    EN 61338-1:2005               Waveguide type dielectric resonators -- Part 1: Generic             NCT   36   18 MECMA
294                               specification
295 EN 60068-2-1:2007             Environmental testing -- Part 2-1: Tests - Test A: Cold             NCT   17   19 MECMA
      EN 60068-2-10:2005          Environmental testing -- Part 2-10: Tests - Test J and              NCT   35   19 MECMA
296                               guidance: Mould growth
297 EN 60068-2-2:2007             Environmental testing -- Part 2-2: Tests - Test B: Dry heat         NCT   18   19 MECMA
    EN 60068-2-53:2010            Environmental testing -- Part 2-53: Tests and guidance:             NCT   20   19 MECMA
                                  Combined climatic (temperature/humidity) and dynamic
298                               (vibration/shock) tests
      EN 60068-2-57:2000          Environmental testing -- Part 2-57: Tests - Test Ff: Vibration -    FCT   34   19 MECMA
299                               Time-history method
      EN 60317-0-5:2007           Specifications for particular types of winding wires -- Part 0-5:   NCT   25   21 MECMA
                                  General requirements - Glass-fibre braided resin or varnish
                                  impregnated, bare or enamelled rectangular copper wire
300
      EN 60317-8:2010             Specifications for particular types of winding wires -- Part 8:     NCT   12   21 MECMA
                                  Polyesterimide enamelled round copper wire, class 180
301
      EN ISO 9409-2:2003          Manipulating industrial robots - Mechanical interfaces - Part 2:    FCT   10   23 MECMA
302                               Shafts (ISO 9409-2:2002)




                                                 Pagina 11 din 346
      EN ISO 9787:1999            Manipulating industrial robots - Coordinate systems and motion         FCT    13   23 MECMA
303                               nomenclatures (ISO 9787:1999)
      EN ISO 9946:1999            Manipulating industrial robots - Presentation of characteristics       FCT    18   23 MECMA
304                               (ISO 9946:1999)
      EN ISO 19439:2006           Enterprise integration - Framework for enterprise modelling            NCT    36   23 MECMA
305                               (ISO 19439:2006)
      EN 60546-1:2010             Controllers with analogue signals for use in industrial-process        TR     42   23 MECMA
                                  control systems -- Part 1: Methods of evaluating the
306                               performance
      EN 60546-2:2010             Controllers with analogue signals for use in industrial-process        TR     16   23 MECMA
                                  control systems -- Part 2: Guidance for inspection and routine
307                               testing
      EN 61207-1:2010             Expression of performance of gas analyzers -- Part 1: General          NCT    43   23 MECMA
308
      EN 61207-3:2002             Gas analyzers - Expression of performance -- Part 3:                   FCT    31   23 MECMA
309                               Paramagnetic oxygen analyzers
      EN 61326-3-1:2008           Electrical equipment for measurement, control and laboratory           NCT    43   23 MECMA
                                  use - EMC requirements -- Part 3-1: Immunity requirements for
                                  safety-related systems and for equipment intended to perform
                                  safety-related functions (functional safety) - General industrial
310                               applications
      EN 61326-3-2:2008           Electrical equipment for measurement, control and laboratory           NCT    38   23 MECMA
                                  use - EMC requirements -- Part 3-2: Immunity requirements for
                                  safety-related systems and for equipment intended to perform
                                  safety-related functions (functional safety) - Industrial
                                  applications with specified electromagnetic environment
311
      EN 61508-1:2010             Functional safety of electrical/electronic/programmable                NCT    67   23 MECMA
                                  electronic safety-related systems -- Part 1: General
312                               requirements
      EN 61508-2:2010             Functional safety of electrical/electronic/programmable                NCT    98   23 MECMA
                                  electronic safety-related systems -- Part 2: Requirements for
                                  electrical/electronic/programmable electronic safety-related
313                               systems
      EN 61508-4:2010             Functional safety of electrical/electronic/programmable                NCT    37   23 MECMA
                                  electronic safety-related systems -- Part 4: Definitions and
314                               abbreviations
      EN 61508-6:2010             Functional safety of electrical/electronic/programmable                NCT   122   23 MECMA
                                  electronic safety-related systems -- Part 6: Guidelines on the
315                               application of IEC 61508-2 and IEC 61508-3
      EN 61508-7:2010             Functional safety of electrical/electronic/programmable                NCT   152   23 MECMA
                                  electronic safety-related systems -- Part 7: Overview of
316                               techniques and measures
      EN 61161:2007               Ultrasonics - Power measurement - Radiation force balances     NCT            52   26 MECMA
317                               and performance requirements
      EN 50131-6:2008             Alarm systems - Intrusion and hold-up systems -- Part 6: Power NCT            42   27 MECMA
318                               supplies
      EN 55016-1-4:2010           Specification for radio disturbance and immunity measuring     NCT           107   30 MECMA
                                  apparatus and methods -- Part 1-4: Radio disturbance and
                                  immunity measuring apparatus - Antennas and test sites for
                                  radiated disturbance measurements
319
      EN 61000-4-15:2011          Electromagnetic compatibility (EMC) -- Part 4-15: Testing and          NC     45   30 MECMA
                                  measurement techniques - Flickermeter - Functional and
320                               design specifications
      EN 60695-1-11:2010          Fire hazard testing -- Part 1-11: Guidance for assessing the fire TR          48   33 MECMA
                                  hazard of electrotechnical products - Fire hazard assessment
321
      EN 60695-2-12:2010          Fire hazard testing -- Part 2-12: Glowing/hot-wire based test TR              16   33 MECMA
                                  methods - Glow-wire flammability index (GWFI) test method for
322                               materials
      EN 60695-2-13:2010          Fire hazard testing -- Part 2-13: Glowing/hot-wire based test          TR     16   33 MECMA
                                  methods - Glow-wire ignition temperature (GWIT) test method
323                               for materials
      EN 60695-6-1:2005/A1:2010   Fire hazard testing -- Part 6-1: Smoke obscuration - General           TR     18   33 MECMA
324                               guidance
      EN 60695-7-1:2010           Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General   NCT    29   33 MECMA
325                               guidance
      EN 61800-7-304:2008         Adjustable speed electrical power drive systems - Part 7-304:          NCT    82   36 MECMA
                                  Generic interface and use of profiles for power drive systems -
                                  Mapping of profile type 4 to network technologies
326



                                                  Pagina 12 din 346
      EN 60871-1:2005              Shunt capacitors for a.c. power systems having a rated voltage NCT       54   37 MECMA
327                                above 1 000 V -- Part 1: General
      EN 287-6:2010                Qualification test of welders - Fusion welding - Part 6: Cast iron NCT   23   39 MECMA
328
      EN 560:2005/AC:2007          Gas welding equipment - Hose connections for equipment for         NCT    1   39 MECMA
329                                welding, cutting and allied processes
      EN ISO 636:2008              Welding consumables - Rods, wires and deposits for tungsten        NCT   14   39 MECMA
                                   inert gas welding of non-alloy and fine-grain steels -
330                                Classification (ISO 636:2004)
      EN ISO 4063:2010             Welding and allied processes - Nomenclature of processes           TR    24   39 MECMA
                                   and reference numbers (ISO 4063:2009, Corrected version
331                                2010-03-01)
      EN ISO 5173:2010             Destructive tests on welds in metallic materials - Bend tests      NCT   21   39 MECMA
332                                (ISO 5173:2009)
      EN ISO 6847:2001             Welding consumables - Deposition of a weld metal pad for           FCT    7   39 MECMA
333                                chemical analysis (ISO 6847:2000)
      EN ISO 6848:2004             Arc welding and cutting - Nonconsumable tungsten electrodes -      FCT   10   39 MECMA
334                                 Classification (ISO 6848:2004)
      EN ISO 6947:2011             Welding and allied processes - Welding positions (ISO              TR    20   39 MECMA
335                                6947:2011)
      EN ISO 9692-2:1998/AC:1999   Welding and allied processes - Joint preparation - Part 2:         FCT    1   39 MECMA
336                                Submerged arc welding of steels (ISO 9692-2:1998)
      EN ISO 11666:2010            Non-destructive testing of welds - Ultrasonic testing -            TR    20   39 MECMA
337                                Acceptance levels (ISO 11666:2010)
      EN ISO 14171:2010            Welding consumables - Solid wire electrodes, tubular cored         NCT   23   39 MECMA
                                   electrodes and electrode/flux combinations for submerged arc
                                   welding of non alloy and fine grain steels - Classification (ISO
338                                14171:2010)
      EN ISO 14175:2008            Welding consumables - Gases and gas mixtures for fusion            NCT   12   39 MECMA
339                                welding and allied processes (ISO 14175:2008)
      EN ISO 14344:2010            Welding consumables - Procurement of filler materials and          NCT   12   39 MECMA
340                                fluxes (ISO 14344:2010)
      CEN/TR 14599:2005            Terms and definitions for welding purposes in relation with EN     TR    57   39 MECMA
341                                1792
      EN 14610:2004                Welding and allied processes - Definitions of metal welding        NCT   28   39 MECMA
342                                processes
      EN ISO 17633:2010            Welding consumables - Tubular cored electrodes and rods for        TR    30   39 MECMA
                                   gas shielded and non-gas shielded metal arc welding of
                                   stainless and heat-resisting steels - Classification (ISO
343                                17633:2010)
      EN ISO 17640:2010            Non-destructive testing of welds - Ultrasonic testing -            TR    29   39 MECMA
                                   Techniques, testing levels, and assessment (ISO 17640:2010)
344
      EN ISO 17659:2004            Welding - Multilingual terms for welded joints with illustrations FCT    53   39 MECMA
345                                (ISO 17659:2002)
      EN ISO 17662:2005            Welding - Calibration, verification and validation of equipment   NCT    35   39 MECMA
                                   used for welding, including ancillary activities (ISO 17662:2005)
346
      EN ISO 17677-1:2009          Resistance welding - Vocabulary - Part 1: Spot, projection and     NCT   39   39 MECMA
347                                seam welding (ISO 17677-1:2009)
      EN ISO 7963:2010             Non-destructive testing - Ultrasonic testing - Specification for   NCT   12   40 MECMA
348                                calibration block No. 2 (ISO 7963:2006)
      EN ISO 3785:2006             Metallic materials - Designation of test specimen axes in          NCT    9   42 MECMA
349                                relation to product texture (ISO 3785:2006)
350 EN 10021:2006                  General technical delivery conditions for steel products           NCT   17   42 MECMA
    EN 10029:2010                  Hot-rolled steel plates 3 mm thick or above - Tolerances on       TR     12   42 MECMA
351                                dimensions and shape
    EN 10051:2010                  Continuously hot-rolled strip and plate/sheet cut from wide strip NCT    16   42 MECMA
                                   of non-alloy and alloy steels - Tolerances on dimensions and
352                                shape
      EN 10163-1:2004/AC:2007      Delivery requirements for surface condition of hot-rolled steel    NCT    1   42 MECMA
                                   plates, wide flats and sections - Part 1: General requirements
353
      EN 10243-1:1999/AC:2005      Steel die forgings - Tolerances on dimensions - Part 1: Drop       NCT    1   42 MECMA
354                                and vertical press forgings
      EN 10243-2:1999/AC:2005      Steel die forgings - Tolerances on dimensions - Part 2: Upset      NCT    1   42 MECMA
355                                forging made on horizontal forging machines
      EN 10247:2007                Micrographic examination of the non-metallic inclusion content     NCT   83   42 MECMA
356                                of steels using standard pictures
      EN ISO 12737:2010            Metallic materials - Determination of plane-strain fracture        TR    21   42 MECMA
357                                toughness (ISO 12737:2010)




                                                  Pagina 13 din 346
      EN ISO 15630-1:2010           Steel for the reinforcement and prestressing of concrete - Test   NCT   23   42 MECMA
                                    methods - Part 1: Reinforcing bars, wire rod and wire (ISO
358                                 15630-1:2010)
      EN ISO 15630-2:2010           Steel for the reinforcement and prestressing of concrete - Test   NCT   19   42 MECMA
                                    methods - Part 2: Welded fabric (ISO 15630-2:2010)
359
      EN ISO 15630-3:2010           Steel for the reinforcement and prestressing of concrete - Test   NCT   30   42 MECMA
                                    methods - Part 3: Prestressing steel (ISO 15630-3:2010)
360
      EN 24159:1989/AC1:1989        Ferromanganese and ferrosilicomanganese - Determination of        FCT    1   45 MECMA
                                    manganese content - Potentiometric method (ISO 4159:1978,
361                                 ed. 1)
      EN 24943:1990/AC:1991         Steel and cast iron - Determination of copper content - Flame     FCT    1   45 MECMA
                                    atomic absorption spectrometric method (ISO 4943:1985)
362
      EN 24946:1990/AC:1991         Steel and cast iron - Determination of copper content -           FCT    1   45 MECMA
363                                 2,2'diquinolyl spectrophotometric method (ISO 4946:1984)
      EN ISO 2739:2010              Sintered metal bushes - Determination of radial crushing          NCT    6   46 MECMA
364                                 strength (ISO 2739:2006)
      EN ISO 3369:2010              Impermeable sintered metal materials and hardmetals -             NCT    7   46 MECMA
365                                 Determination of density (ISO 3369:2006)
      EN ISO 3923-1:2010            Metallic powders - Determination of apparent density - Part 1:    NCT    8   46 MECMA
366                                 Funnel method (ISO 3923-1:2008)
      EN ISO 3927:2011              Metallic powders, excluding powders for hardmetals -              TR    11   46 MECMA
                                    Determination of compressibility in uniaxial compression (ISO
367                                 3927:2011)
      EN ISO 3953:2011              Metallic powders - Determination of tap density (ISO              TR     7   46 MECMA
368                                 3953:2011)
369 EN 10293:2005/AC:2008           Steel castings for general engineering uses                       NCT    1   47 MECMA
    CEN/TS 15675:2007               Air quality - Measurement of stationary source emissions -        FCT   42   53 MECMA
                                    Application of EN ISO/IEC 17025:2005 to periodic
370                                 measurements
      EN ISO 23210:2009             Stationary source emissions - Determination of PM10/PM2,5         NCT   45   53 MECMA
                                    mass concentration in flue gas - Measurement at low
                                    concentrations by use of impactors (ISO 23210:2009)
371
      EN ISO 3766:2003              Construction drawings - Simplified representation of concrete     FCT   24   55 MECMA
372                                 reinforcement (ISO 3766:2003)
      EN ISO 3766:2003/AC:2004      Construction drawings - Simplified representation of concrete     NCT    1   55 MECMA
373                                 reinforcement (ISO 3766:2003)
      EN 9133:2004                  Aerospace series - Quality management systems -                   NCT    7   55 MECMA
374                                 Qualification procedure for aerospace standard parts
375 EN ISO 26909:2010               Springs - Vocabulary (ISO 26909:2009)                             NCT   88   55 MECMA
    EN ISO/IEC 17021:2011           Conformity assessment - Requirements for bodies providing         TR    47   56 MECMA
                                    audit and certification of management systems (ISO/IEC
376                                 17021:2011)
    SR EN ISO/CEI                                                                                     EL     2   56 MECMA
377 17021:2011/C91:2011
    EN 1325-1:1996                  Value Management, Value Analysis, Functional Analysis             FCT   14   57 MECMA
                                    vocabulary - Part 1: Value Analysis and Functional Analysis
378
      EN 1325-2:2004                Value Management, Value Analysis, Functional Analysis             NCT    8   57 MECMA
379                                 vocabulary - Part 2: Value Management
      EN ISO 286-1:2010             Geometrical product specifications (GPS) - ISO code system        NCT   41   58 MECMA
                                    for tolerances on linear sizes - Part 1: Basis of tolerances,
380                                 deviations and fits (ISO 286-1:2010)
      EN ISO 286-2:2010             Geometrical product specifications (GPS) - ISO code system       NCT    55   58 MECMA
                                    for tolerances on linear sizes - Part 2: Tables of standard
                                    tolerance classes and limit deviations for holes and shafts (ISO
381                                 286-2:2010)
      EN ISO 3611:2010              Geometrical product specifications (GPS) - Dimensional     TR           21   58 MECMA
                                    measuring equipment: Micrometers for external measurements
                                    - Design and metrological characteristics (ISO 3611:2010)
382
      EN ISO 10360-1:2000/AC:2002   Geometrical Product Specifications (GPS) - Acceptance and      FCT       4   58 MECMA
                                    reverification tests for coordinate measuring machines (CMM) -
                                    Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002)
383




                                                  Pagina 14 din 346
      EN ISO 10360-4:2000/AC:2002   Geometrical Product Specifications (GPS) - Acceptance and      FCT        3   58 MECMA
                                    reverification tests for coordinate measuring machines (CMM) -
                                    Part 4: CMMs used in scanning measuring mode (ISO 10360-
384                                 4:2000/Cor.1:2002)
      EN ISO 10360-5:2010           Geometrical product specifications (GPS) - Acceptance and      NCT       33   58 MECMA
                                    reverification tests for coordinate measuring machines (CMM) -
                                    Part 5: CMMs using single and multiple stylus contacting
385                                 probing systems (ISO 10360-5:2010)
      EN ISO 225:2010               Fasteners - Bolts, screws, studs and nuts - Symbols and            NCT   60   59 MECMA
386                                 descriptions of dimensions (ISO 225:2010)
      EN ISO 898-1:2009             Mechanical properties of fasteners made of carbon steel and        NCT   60   59 MECMA
                                    alloy steel - Part 1: Bolts, screws and studs with specified
                                    property classes - Coarse thread and fine pitch thread (ISO
387                                 898-1:2009)
388 EN ISO 1478:1999                Tapping screws thread (ISO 1478:1999)                              FCT    5   59 MECMA
    EN ISO 4036:2000                Hexagon thin nuts (unchamfered) - Product grade B (ISO             FCT    8   59 MECMA
389                                 4036:1999)
    EN ISO 8673:2000                Hexagon nuts, style 1, with metric fine pitch thread - Product     FCT    8   59 MECMA
390                                 grades A and B (ISO 8673:1999)
    EN ISO 8674:2000                Hexagon nuts, style 2, with metric fine pitch thread - Product     FCT    8   59 MECMA
391                                 grades A and B (ISO 8674:1999)
    EN ISO 8675:2000                Hexagon thin nuts (chamfered) with metric fine pitch thread -      FCT    9   59 MECMA
392                                 Product grades A and B (ISO 8675:1999)
    EN ISO 8676:2011                Hexagon head screws with metric fine pitch thread - Product        TR    14   59 MECMA
393                                 grades A and B (ISO 8676:2011)
394 EN ISO 8746:1997                Grooved pins with round head (ISO 8746:1997)                       FCT    6   59 MECMA
395 EN ISO 8747:1997                Grooved pins with countersunk head (ISO 8747:1997)                 FCT    6   59 MECMA
    EN ISO 14580:2001/AC:2005       Hexalobular socket cheese head screws (ISO 14580:2001)             FCT    2   59 MECMA
396
397 EN ISO 14583:2001/AC:2005       Hexalobular socket pan head screws (ISO 14583:2001)                FCT    2   59 MECMA
      EN 914:2008                   Gymnastic equipment - Parallel bars and combination                NCT   11   66 MECMA
                                    asymmetric/parallel bars - Requirements and test methods
398                                 including safety
      EN 915:2008                   Gymnastic equipment - Asymmetric bars - Requirements and           NCT    9   66 MECMA
399                                 test methods including safety
      EN 1176-4:2008                Playground equipment and surfacing - Part 4: Additional            NCT   17   66 MECMA
                                    specific safety requirements and test methods for cableways
400
      EN 1176-7:2008                Playground equipment and surfacing - Part 7: Guidance on           NCT    9   66 MECMA
401                                 installation, inspection, maintenance and operation
      EN 1177:2008                  Impact attenuating playground surfacing - Determination of         NCT   16   66 MECMA
402                                 critical fall height
403 ISO 1977:2006                   Conveyor chains, attachments and sprockets                         TR    13   84 MECMA
    EN ISO 21179:2006               Light conveyor belts - Determination of the electrostatic field    NCT    7   84 MECMA
                                    generated by a running light conveyor belt (ISO 21179:2005)
404
      EN ISO 21183-1:2006           Light conveyor belts - Part 1: Principal characteristics and       NCT    4   84 MECMA
405                                 applications (ISO 21183-1:2005)
      EN 12195-1:2010               Load restraining on road vehicles - Safety - Part 1: Calculation   TR    48   85 MECMA
406                                 of securing forces
      EN 12385-6:2004               Steel wire ropes - Safety - Part 6: Stranded ropes for mine        FCT   24   85 MECMA
407                                 shafts
      EN 14502-1:2010               Cranes - Equipment for the lifting of persons - Part 1:            NCT   14   85 MECMA
408                                 Suspended baskets
      EN ISO 8442-2:1997/AC:2006    Materials and articles in contact with foodstuffs - Cutlery and    NCT    3   88 MECMA
                                    table holloware - Part 2: Requirements for stainless steel and
409                                 silver-plated cutlery (ISO 8442-2:1997)
      EN 558:2008/AC:2010           Industrial valves - Face-to-face and centre-to-face dimensions TR         2   89 MECMA
                                    of metal valves for use in flanged pipe systems - PN and Class
410                                 designated valves
      EN ISO 105-C06:2010           Textiles - Tests for colour fastness - Part C06: Colour fastness   NCT   12 103 MECMA
                                    to domestic and commercial laundering (ISO 105-C06:2010)
411
      EN ISO 105-D01:2010           Textiles - Tests for colour fastness - Part D01: Colour fastness   NCT    8 103 MECMA
                                    to dry cleaning using perchloroethylene solvent (ISO 105-
412                                 D01:2010)
      EN ISO 105-E01:2010           Textiles - Tests for colour fastness - Part E01: Colour fastness NCT      8 103 MECMA
413                                 to water (ISO 105-E01:2010)
      EN ISO 105-E03:2010           Textiles - Tests for colour fastness - Part E03: Colour fastness NCT      8 103 MECMA
                                    to chlorinated water (swimming-pool water) (ISO 105-E03:2010)
414



                                                   Pagina 15 din 346
      EN ISO 105-E05:2010           Textiles - Tests for colour fastness - Part E05: Colour fastness     NCT   6 103 MECMA
415                                 to spotting: Acid (ISO 105-E05:2010)
      EN ISO 105-E06:2006/AC:2007   Textiles - Tests for colour fastness - Part E06: Colour fastness     NCT   2 103 MECMA
416                                 to spotting: Alkali (ISO 105-E06:2006)
      EN ISO 105-E07:2010           Textiles - Tests for colour fastness - Part E07: Colour fastness     NCT   6 103 MECMA
417                                 to spotting: Water (ISO 105-E07:2010)
      EN ISO 105-E09:2010           Textiles - Tests for colour fastness - Part E09: Colour fastness     NCT   7 103 MECMA
418                                 to potting (ISO 105-E09:2010)
      EN ISO 105-E12:2010           Textiles - Tests for colour fastness - Part E12: Colour fastness     NCT   9 103 MECMA
419                                 to milling: Alkaline milling (ISO 105-E12:2010)
      EN ISO 1833-1:2010            Textiles - Quantitative chemical analysis - Part 1: General          TR    21 103 MECMA
                                    principles of testing (ISO 1833-1:2006, including Cor 1:2009)
420
      EN ISO 1833-11:2010           Textiles - Quantitative chemical analysis - Part 11: Mixtures of     TR    3 103 MECMA
                                    cellulose and polyester fibres (method using sulfuric acid) (ISO
421                                 1833-11:2006)
      EN ISO 1833-18:2010           Textiles - Quantitative chemical analysis - Part 18: Mixtures of     TR    3 103 MECMA
                                    silk and wool or hair (method using sulfuric acid) (ISO 1833-
422                                 18:2006)
      EN ISO 1833-2:2010            Textiles - Quantitative chemical analysis - Part 2: Ternary fibre    TR    3 103 MECMA
423                                 mixtures (ISO 1833-2:2006)
      EN ISO 1833-3:2010            Textiles - Quantitative chemical analysis - Part 3: Mixtures of      TR    3 103 MECMA
                                    acetate and certain other fibres (method using acetone) (ISO
424                                 1833-3:2006)
      EN ISO 1833-5:2010            Textiles - Quantitative chemical analysis - Part 5: Mixtures of      TR    3 103 MECMA
                                    viscose, cupro or modal and cotton fibres (method using
425                                 sodium zincate) (ISO 1833-5:2006)
      EN ISO 1833-6:2010            Textiles - Quantitative chemical analysis - Part 6: Mixtures of      TR    3 103 MECMA
                                    viscose or certain types of cupro or modal or lyocell and cotton
                                    fibres (method using formic acid and zinc chloride) (ISO 1833-
426                                 6:2007)
      EN ISO 1833-9:2010            Textiles - Quantitative chemical analysis - Part 9: Mixtures of      NCT   5 103 MECMA
                                    acetate and triacetate fibres (method using benzyl alcohol)
427                                 (ISO 1833-9:2006)
      EN ISO 2061:2010              Textiles - Determination of twist in yarns - Direct counting         TR    15 103 MECMA
428                                 method (ISO 2061:2010)
      EN ISO 9073-9:2008            Textiles - Test methods for nonwovens - Part 9: Determination        NCT   15 103 MECMA
                                    of drapability including drape coefficient (ISO 9073-9:2008)
429
      EN ISO 12947-2:1998/AC:2006   Textiles - Determination of abrasion resistance of fabrics by the NCT      2 103 MECMA
                                    Martindale method - Part 2: Determination of specimen
430                                 breakdown (ISO 12947-2:1998/Cor.1:2002)
      EN ISO 12952-1:2010           Textiles - Assessment of the ignitability of bedding items - Part    TR    15 103 MECMA
                                    1: Ignition source: smouldering cigarette (ISO 12952-1:2010)
431
      EN ISO 12952-2:2010           Textiles - Assessment of the ignitability of bedding items - Part    TR    14 103 MECMA
                                    2: Ignition source: match-flame equivalent (ISO 12952-2:2010)
432
      EN 14362-1:2003/AC:2005       Textiles - Methods for the determination of certain aromatic         NCT   1 103 MECMA
                                    amines derived from azo colorants - Part 1: Detection of the
                                    use of certain azo colorants accessible without extraction
433
      EN 14362-2:2003/AC:2005       Textiles - Methods for determination of certain aromatic amines NCT        1 103 MECMA
                                    derived from azo colorants - Part 2: Detection of the use of
                                    certain azo colorants accessible by extracting the fibres
434
      EN 14878:2007/AC:2009         Textiles - Burning behaviour of children's nightwear -               NCT   2 103 MECMA
435                                 Specification
      EN ISO 15797:2004/AC:2004     Textiles - Industrial washing and finishing procedures for           FCT   2 103 MECMA
436                                 testing of workwear (ISO 15797:2002/Cor.1:2004)
      EN 12948:2010                 Liming materials - Determination of size distribution by dry and     TR    11 105 MECMA
437                                 wet sieving
      EN ISO 175:2010               Plastics - Methods of test for the determination of the effects of   NCT   23 108 MECMA
438                                 immersion in liquid chemicals (ISO 175:2010)
      EN ISO 178:2010               Plastics - Determination of flexural properties (ISO 178:2010)       TR    22 108 MECMA
439
      EN ISO 179-1:2010             Plastics - Determination of Charpy impact properties - Part 1:   NCT       25 108 MECMA
440                                 Non-instrumented impact test (ISO 179-1:2010)
      EN ISO 294-4:2003/AC:2011     Plastics - Injection moulding of test specimens of thermoplastic TR        5 108 MECMA
                                    materials - Part 4: Determination of moulding shrinkage -
                                    Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)
441



                                                   Pagina 16 din 346
      EN ISO 10352:2010           Fibre-reinforced plastics - Moulding compounds and prepregs - TR          10 108 MECMA
                                  Determination of mass per unit area (ISO 10352:2010)
442
      EN 13245-1:2010             Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for NCT    23 108 MECMA
                                  building applications - Part 1: Designation of PVC-U profiles
443
      EN ISO 14125:1998/A1:2011   Fibre-reinforced plastic composites - Determination of flexural     TR    5 108 MECMA
                                  properties - Amendment 1 (ISO 14125:1998/Amd 1:2011)
444
      EN ISO 28941-1:2008         Plastics - Poly(phenylene ether) (PPE) moulding and extrusion       NCT   12 108 MECMA
                                  materials - Part 1: Designation system and basis for
445                               specifications (ISO 28941-1:2008)
      EN ISO 9300:2005            Measurement of gas flow by means of critical flow Venturi           NCT   40 109 MECMA
446                               nozzles (ISO 9300:2005)
      EN 46-1:2009                Wood preservatives - Determination of the preventive action         NCT   26 118 MECMA
                                  against recently hatched larvae of Hylotrupes bajulus
                                  (Linnaeus) - Part 1: Application by surface treatment
447                               (laboratory method)
      EN 46-2:2009                Wood preservatives - Determination of the preventive action         NCT   22 118 MECMA
                                  against recently hatched larvae of Hylotrupes bajulus
                                  (Linnaeus) - Part 2: Ovicidal effect (laboratory method)
448
449 EN 312:2010                   Particleboards - Specifications                                     NCT   18 118 MECMA
    EN 326-2:2010                 Wood-based panels - Sampling, cutting and inspection - Part         NCT   41 118 MECMA
450                               2: Initial type testing and factory production control
    EN 599-1:2009                 Durability of wood and wood-based products - Efficacy of            NCT   40 118 MECMA
                                  preventive wood preservatives as determined by biological
                                  tests - Part 1: Specification according to use class
451
      EN 634-2:2007               Cement-bonded particleboards - Specifications - Part 2:             NCT   9 118 MECMA
                                  Requirements for OPC bonded particleboards for use in dry,
452                               humid and external conditions
      EN 717-2:1994/AC:2002       Wood-based panels - Determination of formaldehyde release -         FCT   1 118 MECMA
                                  Part 2: Formaldehyde release by the gas analysis method
453
      EN 975-1:2009/AC:2010       Sawn timber - Appearance grading of hardwoods - Part 1: Oak         TR    2 118 MECMA
454                               and beech
      EN 1014-1:2010              Wood preservatives - Creosote and creosoted timber -                NCT   8 118 MECMA
                                  Methods of sampling and analysis - Part 1: Procedure for
455                               sampling creosote
      EN 1014-2:2010              Wood preservatives - Creosote and creosoted timber -                NCT   8 118 MECMA
                                  Methods of sampling and analysis - Part 2: Procedure for
                                  obtaining a sample of creosote from creosoted timber for
456                               subsequent analysis
      EN 1014-3:2010              Wood preservatives - Creosote and creosoted timber -                NCT   12 118 MECMA
                                  Methods of sampling and analysis - Part 3: Determination of
457                               the benzo(a)pyrene content of creosote
      EN 1014-4:2010              Wood preservatives - Creosote and creosoted timber -                NCT   10 118 MECMA
                                  Methods of sampling and analysis - Part 4: Determination of
458                               the water-extractable phenols content of creosote
      EN 1021-1:2006              Furniture - Assessment of the ignitability of upholstered           NCT   21 118 MECMA
459                               furniture - Part 1: Ignition source smouldering cigarette
      EN 1021-2:2006              Furniture - Assessment of the ignitability of upholstered           NCT   22 118 MECMA
460                               furniture - Part 2: Ignition source match flame equivalent
      EN 1533:2010                Wood flooring - Determination of bending strength under static      NCT   16 118 MECMA
461                               load - Test methods
      EN 1534:2010                Wood flooring - Determination of resistance to indentation -        NCT   10 118 MECMA
462                               Test method
      EN 1729-1:2006              Furniture - Chairs and tables for educational institutions - Part   NCT   27 118 MECMA
463                               1: Functional dimensions
      EN 1927-1:2008              Qualitative classification of softwood round timber - Part 1:       NCT   8 118 MECMA
464                               Spruces and firs
      EN 1927-3:2008              Qualitative classification of softwood round timber - Part 3:       NCT   9 118 MECMA
465                               Larches and Douglas fir
      EN 12520:2010               Furniture - Strength, durability and safety - Requirements for      NCT   8 118 MECMA
466                               domestic seating
      EN 13183-1:2002/AC:2003     Moisture content of a piece of sawn timber - Part 1:                FCT   2 118 MECMA
467                               Determination by oven dry method
      EN 13183-2:2002/AC:2003     Moisture content of a piece of sawn timber - Part 2: Estimation     FCT   2 118 MECMA
468                               by electrical resistance method




                                                 Pagina 17 din 346
      EN 13226:2009             Wood flooring - Solid parquet elements with grooves and/or        NCT   32 118 MECMA
469                             tongues
470 EN 13227:2002/AC:2007       Wood flooring - Solid lamparquet products                         NCT    1 118 MECMA
    EN 13228:2002/AC:2007       Wood flooring - Solid wood overlay flooring elements including    NCT    1 118 MECMA
471                             blocks with an interlocking system
472 EN 13629:2002/AC:2007       Wood flooring - Solid pre-assembled hardwood board                NCT    1 118 MECMA
      EN 13696:2008             Wood flooring - Test methods to determine elasticity and          NCT   24 118 MECMA
473                             resistance to wear and impact resistance
474 SR EN 13756:2004/C91:2011                                                                     EL     1 118 MECMA
475 EN 14354:2004/AC:2006       Wood-based panels - Wood veneer floor covering                    NCT    3 118 MECMA
      EN 14749:2005             Domestic and kitchen storage units and worktops - Safety          NCT   24 118 MECMA
476                             requirements and test methods
      EN 623-1:2006             Advanced technical ceramics - Monolithic ceramics - General       NCT    7 119 MECMA
                                and textural properties - Part 1: Determination of the presence
477                             of defects by dye penetration
      EN 623-4:2004             Advanced technical ceramics - Monolithic ceramics - General       FCT   13 119 MECMA
                                and textural properties - Part 4: Determination of surface
478                             roughness
      EN 658-2:2002             Advanced technical ceramics - Mechanical properties of            FCT   18 119 MECMA
                                ceramic composites at room temperature - Part 2:
479                             Determination of compression properties
      EN 658-4:2003             Advanced technical ceramics - Mechanical properties of            FCT   11 119 MECMA
                                ceramic composites at room temperature - Part 4:
                                Determination of interlaminar shear strength by compression
480                             loading of notched test specimens
      EN 658-5:2002             Advanced technical ceramics - Mechanical properties of            FCT    9 119 MECMA
                                ceramic composites at room temperature - Part 5:
                                Determination of interlaminar shear strength by short span
481                             bend test (three points)
      EN 725-1:2007             Advanced technical ceramics - Methods of test for ceramic         NCT   11 119 MECMA
                                powders - Part 1: Determination of impurities in alumina
482
      EN 725-8:2006             Advanced technical ceramics - Methods of test for ceramic         NCT   10 119 MECMA
                                powders - Part 8: Determination of tapped bulk density
483
      EN 820-3:2004             Advanced technical ceramics - Methods of testing monolithic       FCT   12 119 MECMA
                                ceramics - Thermomechanical properties - Part 3:
                                Determination of resistance to thermal shock by water
484                             quenching
      EN 821-3:2005             Advanced technical ceramics - Monolithic ceramics. Thermo-        NCT   18 119 MECMA
                                physical properties - Part 3: Determination of specific heat
485                             capacity
      EN 1071-6:2007            Advanced technical ceramics - Methods of test for ceramic         NCT   20 119 MECMA
                                coatings - Part 6: Determination of the abrasion resistance of
486                             coatings by a micro-abrasion wear test
      EN 1159-1:2003            Advanced technical ceramics - Ceramic composites -                FCT   15 119 MECMA
                                Thermophysical properties - Part 1: Determination of thermal
487                             expansion
      EN 1159-3:2003            Advanced technical ceramics - Ceramic composites,                 FCT   26 119 MECMA
                                thermophysical properties - Part 3: Determination of specific
488                             heat capacity
      EN 1389:2003              Advanced technical ceramics - Ceramic composites - Physical       FCT    9 119 MECMA
                                properties - Determination of density and apparent porosity
489
      EN 12923-1:2006           Advanced technical ceramics - Monolithic ceramics - Part 1:   NCT       19 119 MECMA
490                             General practice for undertaking corrosion tests
      EN 13234:2006             Advanced technical ceramics - Mechanical properties of        NCT       15 119 MECMA
                                ceramic composites at ambient temperature - Evaluation of the
                                resistance to crack propagation by notch sensitivity testing
491
      EN 13235:2006             Advanced technical ceramics - Mechanical properties of            NCT   15 119 MECMA
                                ceramic composites at high temperature under inert
492                             atmosphere - Determination of creep behaviour
      EN 60255-22-4:2008        Measuring relays and protection equipment -- Part 22-4:           NCT   16 128 MECMA
                                Electrical disturbance tests - Electrical fast transient/burst
493                             immunity test
494 EN 60974-9:2010             Arc welding equipment -- Part 9: Installation and use             NCT   31 129 MECMA
    EN 60901:1996               Single-capped fluorescent lamps - Performance specifications      FCT   181 131 MECMA
495
    EN 60901:1996/A2:2000       Single-capped fluorescent lamps - Performance specifications      FCT   62 131 MECMA
496



                                               Pagina 18 din 346
      EN 60901:1996/A3:2004       Single-capped fluorescent lamps - Performance specifications       FCT   76 131 MECMA
497
      EN 60901:1996/A4:2008       Single-capped fluorescent lamps - Performance specifications       NCT   56 131 MECMA
498
      EN 60079-10-1:2009          Explosive atmospheres -- Part 10-1: Classification of areas -      NCT   72 137 MECMA
499                               Explosive gas atmospheres
      EN 60079-10-2:2009          Explosive atmospheres -- Part 10-2: Classification of areas -      NCT   35 137 MECMA
500                               Combustible dust atmospheres
      EN 62013-2:2006             Caplights for use in mines susceptible to firedamp -- Part 2:      NCT   15 137 MECMA
501                               Performance and other safety-related matters
502 EN 31010:2010                 Risk management - Risk assessment techniques                       NCT   93 144 MECMA
    EN 60300-3-12:2004            Dependability management -- Part 3-12: Application guide -         FCT   50 144 MECMA
503                               Integrated logistic support
    EN 378-3:2008                 Refrigerating systems and heat pumps - Safety and                  NCT   20 147 MECMA
                                  environmental requirements - Part 3: Installation site and
504                               personal protection
      EN 378-4:2008               Refrigerating systems and heat pumps - Safety and                  NCT   25 147 MECMA
                                  environmental requirements - Part 4: Operation, maintenance,
505                               repair and recovery
      EN 764-2:2002               Pressure equipment - Part 2: Quantities, symbols and units         FCT    6 152 MECMA
506
507 EN 764-3:2002                 Pressure equipment - Part 3: Definition of parties involved        FCT    5 152 MECMA
    CEN/TR 13445-9:2007           Unfired pressure vessels - Part 9: Conformance of the EN           TR    38 152 MECMA
508                               13445 series to ISO 16528
    EN 1035:1998/AC:2002          Tannery machines - Moving platen machinery - Safety                FCT    1 154 MECMA
509                               requirements
    EN ISO 1463:2004              Metallic and oxide coatings - Measurement of coating               FCT   14 157 MECMA
510                               thickness - Microscopical method (ISO 1463:2003)
    EN ISO 7539-6:2003            Corrosion of metals and alloys - Stress corrosion testing - Part   FCT   41 157 MECMA
                                  6: Preparation and use of pre-cracked specimens for tests
                                  under constant load or constant displacement (ISO 7539-
511                               6:2003)
      EN ISO 7539-7:2005          Corrosion of metals and alloys - Stress corrosion testing - Part   NCT    9 157 MECMA
                                  7: Method for slow strain rate testing (ISO 7539-7:2005)
512
      EN ISO 10062:2008           Corrosion tests in artificial atmosphere at very low              NCT    15 157 MECMA
513                               concentrations of polluting gas(es) (ISO 10062:2006)
      EN ISO 11130:2010           Corrosion of metals and alloys - Alternate immersion test in salt NCT    17 157 MECMA
514                               solution (ISO 11130:2010)
      EN 12487:2007               Corrosion protection of metals - Rinsed and non-rinsed            NCT    16 157 MECMA
                                  chromate conversion coatings on aluminium and aluminium
515                               alloys
      EN ISO 28762:2010           Vitreous and porcelain enamels - Enamel coatings applied to        TR     7 157 MECMA
                                  steel for writing surfaces - Specification (ISO 28762:2010)
516
      EN 50290-4-2:2008           Communication cables -- Part 4-2: General considerations for       NCT   32 160 MECMA
517                               the use of cables - Guide to use
      EN 60071-1:2006             Insulation co-ordination -- Part 1: Definitions, principles and    NCT   38 162 MECMA
518                               rules
      EN 60071-1:2006/A1:2010     Insulation co-ordination -- Part 1: Definitions, principles and    NCT    9 162 MECMA
519                               rules
      EN 50341-1:2001             Overhead electrical lines exceeding AC 45 kV -- Part 1:            FCT   234 165 MECMA
520                               General requirements - Common specifications
      EN 50423-1:2005             Overhead electrical lines exceeding AC 1 kV up to and              NCT   28 165 MECMA
                                  including AC 45 kV -- Part 1: General requirements - Common
521                               specifications
      EN ISO 13533:2001/AC:2006   Petroleum and natural gas industries - Drilling and production     NCT    3 169 MECMA
                                  equipment - Drill-through equipment (ISO
522                               13533:2001/Cor.1:2005)
      EN ISO 19900:2002           Petroleum and natural gas industries - General requirements        FCT   30 169 MECMA
523                               for offshore structures (ISO 19900:2002)
      EN 570:2007                 Aluminium and aluminium alloys - Impact extrusion slugs            NCT   12 170 MECMA
524                               obtained from wrought products - Specification
      EN 1652:1997/AC:2003        Copper and copper alloys - Plate, sheet, strip and circles for     FCT    1 171 MECMA
525                               general purposes
      EN 1654:1997/AC:2003        Copper and copper alloys - Strip for springs and connectors        FCT    1 171 MECMA
526
527 EN 12166:1998/AC:2003         Copper and copper alloys - Wire for general purposes               FCT    1 171 MECMA
528 EN 13148:2010                 Copper and copper alloys - Hot-dip tinned strip                    NCT   43 171 MECMA
      EN 10244-1:2009/AC:2011     Steel wire and wire products - Non-ferrous metallic coatings on TR        2 184 MECMA
529                               steel wire - Part 1: General principles




                                                 Pagina 19 din 346
      EN 10263-1:2001/AC:2002     Steel rod, bars and wire for cold heading and cold extrusion -    FCT   1 184 MECMA
530                               Part 1: General technical delivery conditions
      EN 1360:2005                Rubber and plastic hoses and hose assemblies for measured         NCT   28 189 MECMA
531                               fuel dispensing systems - Specification
      EN ISO 5774:2008            Plastics hoses - Textile-reinforced types for compressed-air      NCT   15 189 MECMA
                                  applications - Specification (ISO 5774:2006)
532
      EN ISO 6802:2008            Rubber and plastics hoses and hose assemblies with wire           NCT   7 189 MECMA
                                  reinforcements - Hydraulic impulse test with flexing (ISO
533                               6802:2005)
      EN ISO 7326:2008            Rubber and plastics hoses - Assessment of ozone resistance        NCT   10 189 MECMA
534                               under static conditions (ISO 7326:2006)
      EN ISO 19957:2004/AC:2006   Footwear - Test methods for heels - Heel pin holding strength     NCT   3 190 MECMA
535                               (ISO 19957:2004/Cor.1:2005)
      EN ISO 20869:2010           Footwear - Test methods for outsoles, insoles, lining and         NCT   6 190 MECMA
536                               insocks - Water soluble content (ISO 20869:2010)
      EN 837-1:1996/AC:1998       Pressure gauges - Part 1: Bourdon tube pressure gauges -          FCT   2 192 MECMA
                                  Dimensions, metrology, requirements and testing
537
      EN ISO 2858:2010            End-suction centrifugal pumps (rating 16 bar) - Designation,      TR    5 201 MECMA
                                  nominal duty point and dimensions (ISO 2858:1975)
538
      EN ISO 3661:2010            End-suction centrifugal pumps - Baseplate and installation        TR    6 201 MECMA
539                               dimensions (ISO 3661:1977)
      EN ISO 9905:1997/AC:2006    Technical specifications for centrifugal pumps - Class I (ISO     NCT   2 201 MECMA
540                               9905:1994)
541 ISO 3419:1981                 Non-alloy and alloy steel butt-welding fittings                   TR    17 202 MECMA
542 SR EN 10217-5:2003/C91:2011                                                                     EL    1 202 MECMA
      EN 10220:2002               Seamless and welded steel tubes - Dimensions and masses           FCT   9 202 MECMA
543                               per unit length
      EN 10296-2:2005/AC:2007     Welded circular steel tubes for mechanical and general            NCT   1 202 MECMA
                                  engineering purposes - Technical delivery conditions - Part 2:
544                               Stainless steel
      EN 10297-2:2005/AC:2007     Seamless circular steel tubes for mechanical and general          NCT   1 202 MECMA
                                  engineering purposes - Technical delivery conditions - Part 2:
545                               Stainless steel
      EN ISO 19879:2010           Metallic tube connections for fluid power and general use -       NCT   23 202 MECMA
                                  Test methods for hydraulic fluid power connections (ISO
546                               19879:2010)
      EN ISO 1513:2010            Paints and varnishes - Examination and preparation of test      NCT     7 203 MECMA
547                               samples (ISO 1513:2010)
      EN ISO 1514:2004            Paints and varnishes - Standard panels for testing (ISO         FCT     17 203 MECMA
548                               1514:2004)
      EN ISO 2812-1:2007          Paints and varnishes - Determination of resistance to liquids - NCT     9 203 MECMA
                                  Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
549
      EN ISO 4618:2006            Paints and varnishes - Terms and definitions (ISO 4618:2006)      NCT   67 203 MECMA
550
      EN ISO 8130-1:2010          Coating powders - Part 1: Determination of particle size          TR    3 203 MECMA
551                               distribution by sieving (ISO 8130-1:1992)
      EN ISO 8130-2:2010          Coating powders - Part 2: Determination of density by gas         TR    3 203 MECMA
                                  comparison pyknometer (referee method) (ISO 8130-2:1992)
552
      EN ISO 8130-3:2010          Coating powders - Part 3: Determination of density by liquid      TR    3 203 MECMA
553                               displacement pyknometer (ISO 8130-3:1992)
      EN ISO 8130-4:2010          Coating powders - Part 4: Calculation of lower explosion limit    TR    4 203 MECMA
554                               (ISO 8130-4:1992, including Cor 1:1993)
      EN ISO 8130-5:2010          Coating powders - Part 5: Determination of flow properties of a   TR    3 203 MECMA
555                               powder/air mixture (ISO 8130-5:1992)
      EN ISO 8130-6:2010          Coating Powders - Part 6: Determination of gel time of            TR    4 203 MECMA
                                  thermosetting coating powders at a given temperature (ISO
556                               8130-6:1992, including Amd 1:1998)
      EN ISO 8130-7:2010          Coating powders - Part 7: Determination of loss of mass on        TR    3 203 MECMA
557                               stoving (ISO 8130-7:1992)
      EN ISO 8130-8:2010          Coating powders - Part 8: Assessment of the storage stability     TR    3 203 MECMA
558                               of thermosetting powders (ISO 8130-8:1994)
      EN ISO 9514:2005            Paints and varnishes - Determination of the pot life of           NCT   9 203 MECMA
                                  multicomponent coating systems - Preparation and
                                  conditioning of samples and guidelines for testing (ISO
559                               9514:2005)




                                                 Pagina 20 din 346
      EN ISO 11341:2004            Paints and varnishes - Artificial weathering and exposure to         FCT   18 203 MECMA
                                   artificial radiation - Exposure to filtered xenon-arc radiation
560                                (ISO 11341:2004)
      EN 12812:2008                Falsework - Performance requirements and general design              NCT   42 218 MECMA
561
      EN ISO 216:2007              Writing paper and certain classes of printed matter - Trimmed    NCT       12 221 MECMA
                                   sizes - A and B series, and indication of machine direction (ISO
562                                216:2007)
      EN ISO 217:2008              Paper - Untrimmed sizes - Designation and tolerances for             NCT   7 221 MECMA
                                   primary and supplementary ranges, and indication of machine
563                                direction (ISO 217:2008)
      EN 643:2001/AC:2002          Paper and board - European list of standard grades of           FCT        1 221 MECMA
564                                recovered paper and board
      EN 646:2006                  Paper and board intended to come into contact with foodstuffs - NCT        8 221 MECMA
                                   Determination of colour fastness of dyed paper and board
565
      EN 648:2006                  Paper and board intended to come into contact with foodstuffs - NCT        8 221 MECMA
                                   Determination of the fastness of fluorescent whitened paper
566                                and board
      EN ISO 3037:2007             Corrugated fibreboard - Determination of edgewise crush              NCT   7 221 MECMA
                                   resistance (unwaxed edge method) (ISO 3037:2007)
567
      EN ISO 5350-1:2006           Pulps - Estimation of dirt and shives - Part 1: Inspection of        NCT   14 221 MECMA
                                   laboratory sheets by transmitted light (ISO 5350-1:2006)
568
      EN ISO 5350-2:2006           Pulps - Estimation of dirt and shives - Part 2: Inspection of mill   NCT   13 221 MECMA
569                                sheeted pulp by transmitted light (ISO 5350-2:2006)
      EN ISO 8254-1:2009           Paper and board - Measurement of specular gloss - Part 1: 75         NCT   13 221 MECMA
                                   degree gloss with a converging beam, TAPPI method (ISO
570                                8254-1:2009)
      EN ISO 12625-3:2005          Tissue paper and tissue products - Part 3: Determination of          NCT   12 221 MECMA
                                   thickness, bulking thickness and apparent bulk density (ISO
571                                12625-3:2005)
      EN ISO 12625-4:2005          Tissue paper and tissue products - Part 4: Determination of          NCT   11 221 MECMA
                                   tensile strength, stretch at break and tensile energy absorption
572                                (ISO 12625-4:2005)
      EN ISO 12625-5:2005          Tissue paper and tissue products - Part 5: Determination of wet      NCT   14 221 MECMA
573                                tensile strength (ISO 12625-5:2005)
      EN ISO 12625-6:2005          Tissue paper and tissue products - Part 6: Determination of          NCT   7 221 MECMA
574                                grammage (ISO 12625-6:2005)
      EN ISO 12625-7:2007          Tissue paper and tissue products - Part 7: Determination of          NCT   12 221 MECMA
575                                optical properties (ISO 12625-7:2007)
      EN 225-1:2007                Atomizing oil burners - Oil burner pumps and oil burner motors -     NCT   7 225 MECMA
                                    Connecting dimensions - Part 1: Oil burner pumps
576
      EN 225-2:2007                Atomizing oil burners - Oil burner pumps and oil burner motors - NCT       6 225 MECMA
                                   Connecting dimensions - Part 2: Oil burner motors
577
      EN 226:1987                  Atomizing oil burners - Connecting dimensions between                FCT   4 225 MECMA
578                                burners and heat generators
      EN 226:1987/AC1:1987         Atomizing oil burners - Connecting dimensions between                FCT   2 225 MECMA
579                                burners and heat generators
      EN ISO 7998:2005             Ophthalmic optics - Spectacle frames - Lists of equivalent           NCT   30 230 MECMA
580                                terms and vocabulary (ISO 7998:2005)
      EN ISO 8980-1:2004/AC:2006   Ophthalmic optics - Uncut finished spectacle lenses - Part 1:        NCT   3 230 MECMA
                                   Specifications for single-vision and multifocal lenses (ISO 8980-
581                                1:2004/Cor.1:2006)
      EN ISO 8980-2:2004/AC:2006   Ophthalmic optics - Uncut finished spectacle lenses - Part 2:        NCT   3 230 MECMA
                                   Specifications for progressive power lenses (ISO 8980-
582                                2:2004/Cor.1:2006)
      EN ISO 8980-4:2006           Ophthalmic optics - Uncut finished spectacle lenses - Part 4:        NCT   20 230 MECMA
                                   Specifications and test methods for anti-reflective coatings
583                                (ISO 8980-4:2006)
      EN ISO 10942:2006            Ophthalmic instruments - Direct ophthalmoscopes (ISO                 NCT   9 230 MECMA
584                                10942:2006)
      EN ISO 11986:2010            Ophthalmic optics - Contact lenses and contact lens care             TR    8 230 MECMA
                                   products - Determination of preservative uptake and release
585                                (ISO 11986:2010)
      EN ISO 14729:2001            Ophthalmic optics - Contact lens care products -                     FCT   23 230 MECMA
                                   Microbiological requirements and test methods for products
                                   and regimens for hygienic management of contact lenses (ISO
586                                14729:2001)



                                                  Pagina 21 din 346
      EN ISO 14729:2001/A1:2010     Ophthalmic optics - Contact lens care products -                  TR    7 230 MECMA
                                    Microbiological requirements and test methods for products
                                    and regimens for hygienic management of contact lenses -
                                    Amendment 1 (ISO 14729:2001/Amd 1:2010)
587
      EN 1439:2008                  LPG equipment and accessories - Procedure for checking LPG NCT          31 231 MECMA
588                                 cylinders before, during and after filling
      EN 1440:2008                  LPG equipment and accessories - Periodic inspection of        NCT       38 231 MECMA
589                                 transportable refillable LPG cylinders
      EN ISO 11114-3:2010           Gas cylinders - Compatibility of cylinder and valve materials TR        10 231 MECMA
                                    with gas contents - Part 3: Autogenous ignition test for non-
                                    metallic materials in oxygen atmosphere (ISO 11114-3:2010)
590
      EN ISO 13341:2010             Gas cylinders - Fitting of valves to gas cylinders (ISO           NCT   11 231 MECMA
591                                 13341:2010)
      EN 580:2003                   Plastics piping systems - Unplasticized poly(vinyl chloride)      FCT   9 237 MECMA
                                    (PVC-U) pipes - Test method for the resistance to
592                                 dichloromethane at a specified temperature (DCMT)
      EN ISO 580:2005               Plastics piping and ducting systems - Injection-moulded           FCT   8 237 MECMA
                                    thermoplastics fittings - Methods for visually assessing the
593                                 effects of heating (ISO 580:2005)
      EN ISO 6259-1:2001            Thermoplastics pipes - Determination of tensile properties -      FCT   9 237 MECMA
                                    Part 1: General test method (ISO 6259-1:1997)
594
      EN ISO 9967:2007              Thermoplastics pipes - Determination of creep ratio (ISO          NCT   15 237 MECMA
595                                 9967:2007)
      EN ISO 9969:2007              Thermoplastics pipes - Determination of ring stiffness (ISO       NCT   11 237 MECMA
596                                 9969:2007)
      EN 50304:2009/A1:2010         Electric cooking ranges, hobs, ovens and grills for household     TR    4 238 MECMA
597                                 use - Methods for measuring performance
      EN 60311:2003                 Electric irons for household or similar use - Methods for         FCT   51 238 MECMA
598                                 measuring performance
      EN 60311:2003/A1:2006         Electric irons for household or similar use - Methods for         NCT   2 238 MECMA
599                                 measuring performance
      EN 60311:2003/A2:2009         Electric irons for household or similar use - Methods for         NCT   11 238 MECMA
600                                 measuring performance
      EN 60312:2008                 Vacuum cleaners for household use - Methods of measuring          NCT   79 238 MECMA
601                                 the performance
      EN 60704-2-2:2010             Household and similar appliances - Test code for the              NCT   14 238 MECMA
                                    determination of airborne acoustical noise -- Part 2-2:
602                                 Particular requirements for fan heaters
      EN 60335-2-58:2005/A11:2010   Household and similar electrical appliances - Safety -- Part 2-   NCT   9 239 MECMA
                                    58: Particular requirements for commercial electric
603                                 dishwashing machines
      EN 60335-2-76:2005/A12:2010   Household and similar electrical appliances - Safety -- Part 2-   TR    6 239 MECMA
                                    76: Particular requirements for electric fence energizers
604
      EN 60335-2-89:2010            Household and similar electrical appliances - Safety -- Part 2-   NCT   48 239 MECMA
                                    89: Particular requirements for commercial refrigerating
                                    appliances with an incorporated or remote refrigerant
605                                 condensing unit or compressor
606 EN 61770:2009/AC:2011                                                                             TR    1 239 MECMA
    EN ISO 4180:2010                Packaging - Complete, filled transport packages - General         NCT   21 270 MECMA
                                    rules for the compilation of performance test schedules (ISO
607                                 4180:2009)
      EN ISO 8317:2004/AC:2005      Child-resistant packaging - Requirements and testing              NCT   3 270 MECMA
608                                 procedures for reclosable packages (ISO 8317:2003)
      EN 13081:2008                 Tanks for transport of dangerous goods - Service equipment        NCT   16 270 MECMA
                                    for tanks - Vapour collection adaptor and coupler
609
      EN 13082:2008                 Tanks for transport of dangerous goods - Service equipment        NCT   14 270 MECMA
610                                 for tanks - Vapour transfer valve
      EN 13083:2008                 Tanks for transport of dangerous goods - Service equipment        NCT   18 270 MECMA
                                    for tanks - Adaptor for bottom loading and unloading
611
      EN 13094:2008                 Tanks for the transport of dangerous goods - Metallic tanks       NCT   94 270 MECMA
                                    with a working pressure not exceeding 0,5 bar - Design and
612                                 construction
      EN 14025:2008                 Tanks for the transport of dangerous goods - Metallic pressure    NCT   59 270 MECMA
613                                 tanks - Design and Construction




                                                   Pagina 22 din 346
      EN 14116:2007+A2:2010       Tanks for transport of dangerous goods - Digital interface for       TR    40 270 MECMA
614                               the product recognition device
615 EN 14634:2010                 Glass packaging - 26 H 180 crown finish - Dimensions                 NCT   10 270 MECMA
616 EN 14635:2010                 Glass packaging - 26 H 126 crown finish - Dimensions                 NCT   10 270 MECMA
      EN 50519:2010               Assessment of workers' exposure to electric and magnetic             NCT   17 279 MECMA
617                               fields of industrial induction heating equipment
      EN 1276:2009/AC:2010        Chemical disinfectants and antiseptics - Quantitative                TR    2 298 MECMA
                                  suspension test for the evaluation of bactericidal activity of
                                  chemical disinfectants and antiseptics used in food, industrial,
                                  domestic and institutional areas - Test method and
618                               requirements (phase 2, step 1)
      EN 1656:2009/AC:2010        Chemical disinfectants and antiseptics - Quantitative                TR    2 298 MECMA
                                  suspension test for the evaluation of bactericidal activity of
                                  chemical disinfectants and antiseptics used in the veterinary
                                  area - Test method and requirements (phase 2, step 1)
619
      EN 116:1997/AC:1999         Diesel and domestic heating fuels - Determination of cold filter     FCT   2 320 MECMA
620                               plugging point
      EN ISO 3405:2011            Petroleum products - Determination of distillation                   TR    39 320 MECMA
621                               characteristics at atmospheric pressure (ISO 3405:2011)
      EN 14733:2005+A1:2010       Bitumen and bituminous binders - Bituminous emulsions,               NCT   20 320 MECMA
622                               fluxed and cut-back bitumen factory production control
      EN 15376:2011               Automotive fuels - Ethanol as a blending component for petrol -      TR    8 320 MECMA
623                               Requirements and test methods
      EN 548:2011                 Resilient floor coverings - Specification for plain and decorative   TR    10 324 MECMA
624                               linoleum
      EN 1470:2008                Textile floor coverings - Classification of needled floor            NCT   24 324 MECMA
625                               coverings except for needled pile floor coverings
      EN 1816:2010                Resilient floor coverings - Specification for homogeneous and        NCT   8 324 MECMA
                                  heterogeneous smooth rubber floor coverings with foam
626                               backing
      EN 1817:2010                Resilient floor coverings - Specification for homogeneous and        NCT   8 324 MECMA
                                  heterogeneous smooth rubber floor coverings
627
      EN ISO 4165:2003            Road vehicles - Electrical connections - Double-pole                 FCT   6 333 MECMA
628                               connection (ISO 4165:2001)
      EN 1047-2:2009              Secure storage units - Classification and methods of test for        NCT   33 336 MECMA
                                  resistance to fire - Part 2: Data rooms and data container
629
      EN 1300:2004                Secure storage units - Classification for high security locks        FCT   38 336 MECMA
                                  according to their resistance to unauthorized opening
630
      EN 301:2006                 Adhesives, phenolic and aminoplastic, for load-bearing timber        NCT   8 338 MECMA
                                  structures - Classification and performance requirements
631
632 EN 542:2003                   Adhesives - Determination of density                                 FCT   8 338 MECMA
    EN 543:2003                   Adhesives - Determination of apparent density of powder and          FCT   6 338 MECMA
633                               granule adhesives
    EN ISO 8510-2:2010            Adhesives - Peel test for a flexible-bonded-to-rigid test            TR    9 338 MECMA
                                  specimen assembly - Part 2: 180 degree peel (ISO 8510-
634                               2:2006)
      EN ISO 9653:2000            Adhesives - Test method for shear impact strength of adhesive FCT          9 338 MECMA
635                               bonds (ISO 9653:1998)
      EN 12705:2011               Adhesives for leather and footwear materials - Determination of NC         7 338 MECMA
                                  colour change of white or bright coloured leather surfaces by
636                               migration
637 EN ISO 15605:2004             Adhesives - Sampling (ISO 15605:2000)                                FCT   11 338 MECMA
638 EN 50522:2010                 Earthing of power installations exceeding 1 kV a.c.                  TR    66 340 MECMA
      EN 1594:2009                Gas supply systems - Pipelines for maximum operating                 NCT   83 357 MECMA
639                               pressure over 16 bar - Functional requirements
      EN ISO 6326-1:2009          Natural gas - Determination of sulfur compounds - Part 1:            NCT   10 357 MECMA
640                               General introduction (ISO 6326-1:2007)
      EN ISO 10723:2002/AC:2004   Natural gas - Performance evaluation for on-line analytical          FCT   3 357 MECMA
                                  systems (ISO 10723:1995, including Technical Corrigendum
641                               1:1998)
      EN 12007-1:2000             Gas supply systems - Pipelines for maximum operating             FCT       19 357 MECMA
                                  pressure up to and including 16 bar - Part 1: General functional
642                               recommendations




                                                 Pagina 23 din 346
      EN 12007-2:2000               Gas supply systems - Gas pipelines for maximum operating          FCT   21 357 MECMA
                                    pressure up to and including 16 bar - Part 2: Specific functional
                                    recommendations for polyethylene (MOP up to and including
643                                 10 bar)
      EN 12007-3:2000               Gas supply systems - Pipelines for maximum operating              FCT   15 357 MECMA
                                    pressure up to and including 16 bar - Part 3: Specific functional
644                                 recommendations for steel
      EN 12007-4:2000               Gas supply systems - Pipelines for maximum operating              FCT   29 357 MECMA
                                    pressure up to and including 16 bar - Part 4: Specific functional
645                                 recommendations for renovation
      EN ISO 12213-1:2009           Natural gas - Calculation of compression factor - Part 1:        NCT    16 357 MECMA
646                                 Introduction and guidelines (ISO 12213-1:2006)
      EN ISO 12213-2:2009           Natural gas - Calculation of compression factor - Part 2:        NCT    34 357 MECMA
                                    Calculation using molar-composition analysis (ISO 12213-
647                                 2:2006)
      EN ISO 12213-3:2009           Natural gas - Calculation of compression factor - Part 3:        NCT    41 357 MECMA
648                                 Calculation using physical properties (ISO 12213-3:2006)
649 EN 15529:2007                   Derivatives from coal pyrolysis - Terminology                    NCT     6 372 MECMA
    EN 415-4:1997/AC:2002           Safety of packaging machines - Part 4: Palletisers and           FCT     1 148 MMFPS
650                                 depalletisers
    EN 12568:2010                   Foot and leg protectors - Requirements and test methods for      NCT    28 227 MMFPS
651                                 toecaps and penetration resistant inserts
    EN ISO 11689:1996/AC:2009       Acoustics - Procedure for the comparison of noise-emission       NCT     4 274 MMFPS
                                    data for machinery and equipment (ISO 11689:1996/Cor
652                                 1:2007)
      EN ISO 5667-1:2006/AC:2007    Water quality - Sampling - Part 1: Guidance on the design of     NCT     2   52 MMP
                                    sampling programmes and sampling techniques (ISO 5667-
653                                 1:2006)
      EN 13211:2001/AC:2005         Air quality - Stationary source emissions - Manual method of     NCT     1   53 MMP
                                    determination of the concentration of total mercury
654
      EN 13725:2003/AC:2006         Air quality - Determination of odour concentration by dynamic    NCT     2   53 MMP
655                                 olfactometry
      EN ISO 5667-15:2009           Water quality - Sampling - Part 15: Guidance on the              NCT    20 360 MMP
                                    preservation and handling of sludge and sediment samples
656                                 (ISO 5667-15:2009)
      EN 13965-2:2010               Characterization of waste - Terminology - Part 2: Management     NCT    14 360 MMP
657                                 related terms and definitions
      EN 50554:2010                 Basic standard for the in-situ assessment of a broadcast site    TR     17 279 MS
                                    related to general public exposure to radio frequency
658                                 electromagnetic fields
      EN 62209-1:2006               Human exposure to radio frequency fields from hand-held and      NCT    111 279 MS
                                    body-mounted wireless communication devices - Human
                                    models, instrumentation, and procedures -- Part 1: Procedure
                                    to determine the specific absorption rate (SAR) for hand-held
                                    devices used in close proximity to the ear (frequency range of
659                                 300 MHz to 3 GHz)
      SR EN 1789+A1:2010/C92:2011                                                                    EL      1 377 MS
660
      EN ISO 8362-2:2010            Injection containers and accessories - Part 2: Closures for      TR      8 377 MS
661                                 injection vials (ISO 8362-2:2008)
662 EN ISO 10873:2010               Dentistry - Denture adhesives (ISO 10873:2010)                   NCT    18 377 MS
    EN ISO 11609:2010               Dentistry - Dentifrices - Requirements, test methods and         TR     23 377 MS
663                                 marking (ISO 11609:2010)
664 SR EN 13612:2003/C91:2011                                                                        EL      1 377 MS
665 EN 15927:2010                   Services offered by hearing aid professionals                    TR     26 377 MS
    EN 15986:2011                   Symbol for use in the labelling of medical devices -             TR     13 377 MS
                                    Requirements for labelling of medical devices containing
666                                 phthalates
      EN ISO 27020:2010             Dentistry - Brackets and tubes for use in orthodontics (ISO      TR     14 377 MS
667                                 27020:2010)
      EN 50206-1:2010               Railway applications - Rolling stock - Pantographs:              TR     25    4 MTI
                                    Characteristics and tests -- Part 1: Pantographs for main line
668                                 vehicles
      EN 50206-2:2010               Railway applications - Rolling stock - Pantographs:             TR      23    4 MTI
                                    Characteristics and tests -- Part 2: Pantographs for metros and
669                                 light rail vehicles
      EN 61373:2010                 Railway applications - Rolling stock equipment - Shock and       TR     38    4 MTI
670                                 vibration tests
      EN 2955:1993/AC:1995          Aerospace series - Recycling of titanium and titanium alloy      FCT     1   72 MTI
671                                 scrap




                                                   Pagina 24 din 346
      EN ISO 3381:2011           Railway applications - Acoustics - Measurement of noise inside TR      24 146 MTI
672                              railbound vehicles (ISO 3381:2005)
      EN 15016-2:2004/AC:2007    Technical drawings - Railway applications - Part 2: Parts lists NCT    7 146 MTI
673
      EN ISO 7547:2004/AC:2009   Ships and marine technology - Air-conditioning and ventilation   NCT   4 199 MTI
                                 of accommodation spaces - Design conditions and basis of
674                              calculations (ISO 7547:2002/Cor 1:2008)
      EN ISO 9875:2001/AC:2011   Ships and marine technology - Marine echo-sounding               TR    4 199 MTI
675                              equipment (ISO 9875:2000/Cor 1:2006)
      EN 14744:2005/AC:2006      Inland navigation vessels and sea-going vessels - Navigation     NCT   3 199 MTI
676                              light
      EN 61822:2009              Electrical installations for lighting and beaconing of           NCT   30 303 MTI
677                              aerodromes - Constant current regulators




                                               Pagina 25 din 346
                                           SECTIUNEA 1, CAPITOLUL 2
                               Standarde europene ce se adopta prin anunt (NC)
                                                                                                            Me-
                                                                                                                    Pa-
Nr                                                                                                         toda                 Mini-
                    Indicativ EN                            Titlul in limba engleza                                gini    CT
Crt                                                                                                       adop-                 ster
                                                                                                                   total
                                                                                                            tare
          EN ISO 6887-5:2010             Microbiology of food and animal feeding stuffs -                 NC          16   95 MADR
                                         Preparation of test samples, initial suspension and
                                         decimal dilutions for microbiological examination - Part 5:
                                         Specific rules for the preparation of milk and milk products
      1                                  (ISO 6887-5:2010)
          EN ISO 13720:2010              Meat and meat products - Enumeration of presumptive              NC          10   95 MADR
      2                                  Pseudomonas spp. (ISO 13720:2010)
          EN 15890:2010                  Foodstuffs - Determination of patulin in fruit juice and fruit   NC          17   95 MADR
                                         based purée for infants and young children - HPLC
                                         method with liquid/liquid partition cleanup and solid phase
      3                                  extraction and UV detection
          EN 15891:2010                  Foodstuffs - Determination of deoxynivalenol in cereals, NC                  19   95 MADR
                                         cereal products and cereal based foods for infants and
                                         young children - HPLC method with immunoaffinity column
      4                                  cleanup and UV detection
          EN 15911:2010                  Foodstuffs - Simultaneous determination of nine                  NC          30   95 MADR
                                         sweeteners by high performance liquid chromatography
                                         and evaporative light scattering detection
      5
          EN ISO 3656:2011               Animal and vegetable fats and oils - Determination of      NC                11 180 MADR
                                         ultraviolet absorbance expressed as specific UV extinction
      6                                  (ISO 3656:2011)
          EN ISO 12966-2:2011            Animal and vegetable fats and oils - Gas chromatography          NC          18 180 MADR
                                         of fatty acid methyl esters - Part 2: Preparation of methyl
                                         esters of fatty acids (ISO 12966-2:2011)
      7
          EN 14103:2011                  Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - NC               13 180 MADR
                                         Determination of ester and linolenic acid methyl ester
      8                                  contents
          EN 14105:2011                  Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - NC               21 180 MADR
                                         Determination of free and total glycerol and mono-, di-,
      9                                  triglyceride contents
          EN ISO 11260:2011              Soil quality - Determination of effective cation exchange        NC           4 285 MADR
                                         capacity and base saturation level using barium chloride
                                         solution (ISO 11260:1994/Cor 1:1996)
 10
          EN ISO 14240-1:2011            Soil quality - Determination of soil microbial biomass - Part NC              7 285 MADR
                                         1: Substrate-induced respiration method (ISO 14240-
 11                                      1:1997)
          EN ISO 14240-2:2011            Soil quality - Determination of soil microbial biomass - Part NC             15 285 MADR
                                         2: Fumigation-extraction method (ISO 14240-2:1997)
 12
          EN ISO 14254:2011              Soil quality - Determination of exchangeable acidity in          NC           8 285 MADR
 13                                      barium chloride extracts (ISO 14254:2001)
          EN ISO 15175:2011              Soil quality - Characterization of soil related to               NC          61 285 MADR
 14                                      groundwater protection (ISO 15175:2004)
          EN ISO 15952:2011              Soil quality - Effects of pollutants on juvenile land snails     NC          36 285 MADR
                                         (Helicidae) - Determination of the effects on growth by soil
 15                                      contamination (ISO 15952:2006)
          EN ISO 16072:2011              Soil quality - Laboratory methods for determination of NC                    22 285 MADR
 16                                      microbial soil respiration (ISO 16072:2002)
          EN ISO 16133:2011              Soil quality - Guidance on the establishment and       NC                    37 285 MADR
                                         maintenance of monitoring programmes (ISO 16133:2004)
 17
          EN ISO 16703:2011              Soil quality - Determination of content of hydrocarbon in        NC          21 285 MADR
                                         the range C10 to C40 by gas chromatography (ISO
 18                                      16703:2004)
          EN ISO 17402:2011              Soil quality - Requirements and guidance for the selection       NC          38 285 MADR
                                         and application of methods for the assessment of
                                         bioavailability of contaminants in soil and soil materials
 19                                      (ISO 17402:2008)
          EN ISO 19258:2011              Soil quality - Guidance on the determination of                  NC          27 285 MADR
 20                                      background values (ISO 19258:2005)




                                                    Pagina 26 din 346
     EN ISO 20963:2011           Soil quality - Effects of pollutants on insect larvae          NC   15 285 MADR
                                 (Oxythyrea funesta) - Determination of acute toxicity (ISO
21                               20963:2005)
     EN ISO 22030:2011           Soil quality - Biological methods - Chronic toxicity in higher NC   21 285 MADR
22                               plants (ISO 22030:2005)
     EN ISO 22892:2011           Soil quality - Guidelines for the identification of target     NC   23 285 MADR
                                 compounds by gas chromatography and mass
23                               spectrometry (ISO 22892:2006)
     EN ISO 23470:2011           Soil quality - Determination of effective cation exchange      NC   19 285 MADR
                                 capacity (CEC) and exchangeable cations using a
                                 hexamminecobalt trichloride solution (ISO 23470:2007)
24
25 EN ISO 25177:2011             Soil quality - Field soil description (ISO 25177:2008)         NC   38 285 MADR
   EN 54-1:2011                  Fire detection and fire alarm systems - Part 1: Introduction NC     17 216 MAI
26
   EN 1846-1:2011                Firefighting and rescue service vehicles - Part 1:             NC   10 216 MAI
27                               Nomenclature and designation
   EN 15767-3:2010               Portable equipment for projecting extinguishing agents         NC   19 216 MAI
                                 supplied by fire fighting pumps - Portable monitors - Part
28                               3: Foam devices
     EN 1366-10:2011             Fire resistance tests for service installations - Part 10:     NC   59 217 MAI
29                               Smoke control dampers
30 EN ISO 13943:2010             Fire safety - Vocabulary (ISO 13943:2008)                      NC   54 217 MAI
   EN 15080-12:2011              Extended application of results from fire resistance tests -   NC   16 217 MAI
31                               Part 12: Loadbearing masonry walls
   EN 15269-10:2011              Extended application of test results for fire resistance       NC   67 217 MAI
                                 and/or smoke control for door, shutter and openable
                                 window assemblies including their elements of building
                                 hardware - Part 10: Fire resistance of steel rolling shutter
32                               assemblies
     EN 300 386 v1.5.1:2010      Electromagnetic compatibility and Radio spectrum Matters NC         51   6 MCSI
                                 (ERM);Telecommunication network
                                 equipment;ElectroMagnetic Compatibility (EMC)
33                               requirements
     EN 300 440-2 v1.4.1:2010    Electromagnetic compatibility and Radio spectrum Matters NC         18   6 MCSI
                                 (ERM);Short range devices;Radio equipment to be used in
                                 the 1 GHz to 40 GHz frequency range;Part 2: Harmonized
                                 EN covering the essential requirements of article 3.2 of the
34                               R&TTE Directive
     EN 301 025-2 v1.4.1:2010    Electromagnetic compatibility and Radio spectrum Matters NC         21   6 MCSI
                                 (ERM);VHF radiotelephone equipment for general
                                 communications and associated equipment for Class D
                                 Digital Selective Calling (DSC);Part 2: Harmonized EN
                                 covering the essential requirements of article 3.2 of the
35                               R&TTE Directive
     EN 301 025-3 v1.4.1:2010    Electromagnetic compatibility and Radio spectrum Matters NC         21   6 MCSI
                                 (ERM);VHF radiotelephone equipment for general
                                 communications and associated equipment for Class D
                                 Digital Selective Calling (DSC);Part 3: Harmonized EN
                                 covering the essential requirements of article 3.3(e) of the
36                               R&TTE Directive
     EN 301 489-23 v1.4.1:2010   Electromagnetic compatibility and Radio spectrum Matters NC         21   6 MCSI
                                 (ERM);ElectroMagnetic Compatibility (EMC) standard for
                                 radio equipment and services;Part 23: Specific conditions
                                 for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA)
                                 Base Station (BS) radio, repeater and ancillary equipment
37
     EN 301 489-24 v1.5.1:2010   Electromagnetic compatibility and Radio spectrum Matters NC         24   6 MCSI
                                 (ERM);ElectroMagnetic Compatibility (EMC) standard for
                                 radio equipment and services;Part 24:Specific conditions
                                 for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA)
                                 for Mobile and portable (UE) radio and ancillary equipment
38
     EN 301 489-34 v1.1.1:2010   Electromagnetic compatibility and Radio spectrum Matters NC         20   6 MCSI
                                 (ERM);ElectroMagnetic Compatibility (EMC) standard for
                                 radio equipment and services;Part 34: Specific conditions
                                 for External Power Supply (EPS) for mobile phones
39




                                            Pagina 27 din 346
     EN 302 065 v1.2.1:2010      Electromagnetic compatibility and Radio spectrum Matters NC      67   6 MCSI
                                 (ERM);Short Range Devices (SRD) using Ultra Wide Band
                                 technology (UWB) for communications
                                 purposes;Harmonized EN covering the essential
                                 requirements of article 3.2 of the R&TTE Directive
40
     EN 302 372-2 v1.2.1:2011    Electromagnetic compatibility and Radio spectrum Matters NC      13   6 MCSI
                                 (ERM);Short Range Devices (SRD);Equipment for
                                 Detection and Movement;Tanks Level Probing Radar
                                 (TLPR) operating in the frequency bands 5,8 GHz, 10
                                 GHz, 25 GHz, 61 GHz and 77 GHz;Part 2: Harmonized EN
                                 covering the essential requirements of article 3.2 of the
                                 R&TTE Directive
41
     EN 302 500-2 v2.1.1:2010    Electromagnetic compatibility and Radio spectrum Matters NC      13   6 MCSI
                                 (ERM);Short Range Devices (SRD) using Ultra WideBand
                                 (UWB) technology;Location Tracking equipment operating
                                 in the frequency range from 6 GHz to 9 GHz;Part 2:
                                 Harmonized EN covering the essential requirements of
                                 article 3.2 of the R&TTE Directive
42
     EN 302 617-2 v1.1.1:2010    Electromagnetic compatibility and Radio spectrum Matters NC      16   6 MCSI
                                 (ERM);Ground-based UHF radio transmitters, receivers
                                 and transceivers for the UHF aeronautical mobile service
                                 using amplitude modulation;Part 2: Harmonized EN
                                 covering the essential requirements of article 3.2 of the
                                 R&TTE Directive
43
     EN 302 686 v1.1.1:2011      Intelligent Transport Systems (ITS);Radiocommunications     NC   43   6 MCSI
                                 equipment operating in the 63 GHz to 64 GHz frequency
                                 band;Harmonized EN covering the essential requirements
                                 of article 3.2 of the R&TTE Directive
44
     EN 50498:2010               Electromagnetic compatibility (EMC) - Product family        NC    9   30 MCSI
                                 standard for aftermarket electronic equipment in vehicles
45
     EN 50529-1:2010             EMC Network Standard -- Part 1: Wire-line                   NC   11   30 MCSI
46                               telecommunications networks using telephone wires
     EN 50529-2:2010             EMC Network Standard -- Part 2: Wire-line                   NC   14   30 MCSI
47                               telecommunications networks using coaxial cables
     EN 55011:2009/A1:2010       Industrial, scientific and medical equipment - Radio-       NC    9   30 MCSI
                                 frequency disturbance characteristics - Limits and
48                               methods of measurement
     EN 55022:2006/A2:2010       Information technology equipment - Radio disturbance        NC   12   30 MCSI
                                 characteristics - Limits and methods of measurement
49
     EN 55022:2010               Information technology equipment - Radio disturbance        NC   84   30 MCSI
                                 characteristics - Limits and methods of measurement
50
     EN 55024:2010               Information technology equipment - Immunity                 NC   51   30 MCSI
51                               characteristics - Limits and methods of measurement
     EN 61000-6-3:2007/A1:2011   Electromagnetic compatibility (EMC) -- Part 6-3: Generic    NC   17   30 MCSI
                                 standards - Emission standard for residential, commercial
                                 and light-industrial environments
52
     EN 61000-6-4:2007/A1:2011   Electromagnetic compatibility (EMC) -- Part 6-4: Generic    NC   15   30 MCSI
                                 standards - Emission standard for industrial environments
53
     EN 50377-13-2:2011          Connector sets and interconnect components to be used       NC   28 138 MCSI
                                 in optical fibre communication systems - Product
                                 specifications -- Part 13-2: Type LX.5-PC DUPLEX
                                 terminated on IEC 60793-2-50 category B1.1 and B1.3
                                 singlemode fibre, with full zirconia ferrule category U
54
     EN 50377-13-3:2011          Connector sets and interconnect components to be used       NC   38 138 MCSI
                                 in optical fibre communication systems - Product
                                 specifications -- Part 13-3: Type LX.5-APC DUPLEX
                                 terminated on IEC 60793-2-50 category B1.1 and B1.3
                                 singlemode fibre, with full zirconia ferrule category U
55




                                           Pagina 28 din 346
     EN 50377-15-1:2011   Connector sets and interconnect components to be used       NC   32 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 15-1: Type MPO with 12-fibre PPS
                          ferrules terminated on IEC 60793-2 category A1a
                          multimode fibre for 50/125 micron multimode fibre
56
     EN 50377-4-2:2011    Connector sets and interconnect components to be used       NC   32 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 4-2: Type SC/APC simplex 8°
                          terminated on IEC 60793-2-50 of types B1.1 and B1.3
                          singlemode fibre, with full zirconia ferrule category U
57
     EN 50377-4-4:2011    Connector sets and interconnect components to be used       NC   34 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 4-4: Type SC-PC simplex terminated
                          on IEC 60793-2-50 category B1.1 and B1.3 singlemode
                          fibre, with full zirconia ferrule category U
58
     EN 50377-7-4:2011    Connector sets and interconnect components to be used       NC   39 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 7-4: LC-PC simplex terminated on
                          IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre
                          with full zirconia ferrule for category C
59
     EN 50377-8-10:2010   Connector sets and interconnect components to be used       NC   35 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 8-10: Type LSH-APC simplex
                          terminated on IEC 60793-2-50 category B1.1 and B1.3
                          singlemode fibre with titanium composite ferrule for
60                        category C
     EN 50377-8-11:2010   Connector sets and interconnect components to be used       NC   35 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 8-11: Type LSH-PC simplex
                          terminated on IEC 60793-2-50 category B1.1 and B1.3
                          singlemode fibre with titanium composite ferrule for
61                        category C
     EN 50377-8-12:2010   Connector sets and interconnect components to be used       NC   37 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 8-12: Type LSH-APC simplex
                          terminated on IEC 60793-2-50 category B1.1 and B1.3
                          singlemode fibre with titanium composite ferrule for
62                        category U
     EN 50377-8-13:2010   Connector sets and interconnect components to be used       NC   37 138 MCSI
                          in optical fibre communication systems - Product
                          specifications -- Part 8-13: Type LSH-PC simplex
                          terminated on IEC 60793-2-50 category B1.1 and B1.3
                          singlemode fibre with titanium composite ferrule for
63                        category U
     EN 50411-3-2:2011    Fibre organisers and closures to be used in optical fibre   NC   18 138 MCSI
                          communication systems - Product specifications -- Part 3-
                          2: Singlemode mechanical fibre splice
64
     EN 50551-1:2011      Simplex and duplex cables to be used for cords -- Part 1:   NC   8 138 MCSI
                          Blank Detail Specification and minimum requirements
65
     EN 60793-1-30:2011   Optical fibres -- Part 1-30: Measurement methods and test   NC   14 138 MCSI
66                        procedures - Fibre proof test
     EN 60793-1-31:2010   Optical fibres -- Part 1-31: Measurement methods and test   NC   25 138 MCSI
67                        procedures - Tensile strength
     EN 60793-1-32:2010   Optical fibres -- Part 1-32: Measurement methods and test   NC   13 138 MCSI
68                        procedures - Coating strippability
     EN 60793-1-41:2010   Optical fibres -- Part 1-41: Measurement methods and test   NC   33 138 MCSI
69                        procedures - Bandwidth
     EN 60793-2-10:2011   Optical fibres -- Part 2-10: Product specifications -       NC   40 138 MCSI
                          Sectional specification for category A1 multimode fibres
70
     EN 60793-2-40:2011   Optical fibres -- Part 2-40: Product specifications -       NC   36 138 MCSI
                          Sectional specification for category A4 multimode fibres
71




                                    Pagina 29 din 346
     EN 60794-3-11:2010          Optical fibre cables -- Part 3-11: Outdoor cables - Product   NC   31 138 MCSI
                                 specification for duct, directly buried and lashed aerial
                                 single-mode optical fibre telecommunication cables
72
     EN 60875-1:2010             Fibre optic interconnecting devices and passive               NC   27 138 MCSI
                                 components - Non-wavelength-selective fibre optic
73                               branching devices -- Part 1: Generic specification
     EN 61280-1-3:2010           Fibre optic communication subsystem test procedures --        NC   20 138 MCSI
                                 Part 1-3: General communication subsystems - Central
                                 wavelength and spectral width measurement
74
     EN 61300-1:2011             Fibre optic interconnecting devices and passive               NC   23 138 MCSI
                                 components - Basic test and measurement procedures --
75                               Part 1: General and guidance
     EN 61300-2-17:2011          Fibre optic interconnecting devices and passive               NC   11 138 MCSI
                                 components - Basic test and measurement procedures --
76                               Part 2-17: Tests - Cold
     EN 61300-2-23:2011          Fibre optic interconnecting devices and passive               NC   11 138 MCSI
                                 components - Basic test and measurement procedures --
                                 Part 2-23: Tests - Sealing for non-pressurized closures of
77                               fibre optic devices
     EN 61300-2-24:2010          Fibre optic interconnecting devices and passive               NC   17 138 MCSI
                                 components - Basic test and measurement procedures --
                                 Part 2-24: Tests - Screen testing of ceramic alignment
78                               split sleeve by stress application
     EN 61300-2-47:2010          Fibre optic interconnecting devices and passive               NC   13 138 MCSI
                                 components - Basic test and measurement procedures --
79                               Part 2-47: Tests - Thermal shocks
     EN 61300-2-5:2011           Fibre optic interconnecting devices and passive               NC   12 138 MCSI
                                 components - Basic test and measurement procedures --
80                               Part 2-5: Tests - Torsion
     EN 61300-2-6:2011           Fibre optic interconnecting devices and passive               NC   11 138 MCSI
                                 components - Basic test and measurement procedures --
                                 Part 2-6: Tests - Tensile strength of coupling mechanism
81
     EN 61300-2-9:2010           Fibre optic interconnecting devices and passive               NC   11 138 MCSI
                                 components - Basic test and measurement procedures --
82                               Part 2-9: Tests - Shock
     EN 61300-2-9:2010/AC:2011   Fibre optic interconnecting devices and passive               ER   1 138 MCSI
                                 components - Basic test and measurement procedures --
83                               Part 2-9: Tests - Shock
     EN 61300-3-22:2011          Fibre optic interconnecting devices and passive               NC   10 138 MCSI
                                 components - Basic test and measurement procedures --
                                 Part 3-22: Examinations and measurements - Ferrule
84                               compression force
     EN 61746-1:2011             Calibration of optical time-domain reflectometers (OTDR) -- NC     92 138 MCSI
85                                Part 1: OTDR for single-mode fibres
     EN 61746-2:2011             Calibration of optical time-domain reflectometers (OTDR) -- NC     47 138 MCSI
86                                Part 2: OTDR for multimode fibres
     EN 61753-086-6:2011         Fibre optic interconnecting devices and passive             NC     19 138 MCSI
                                 components - Performance standard -- Part 086-6: Non-
                                 connectorized single-mode bidirectional 1 490 / 1 550 nm
                                 downstream and 1 310 nm upstream WWDM devices for
                                 category O - Uncontrolled environment
87
     EN 61753-087-2:2011         Fibre optic interconnecting devices and passive               NC   17 138 MCSI
                                 components - Performance standard -- Part 087-2: Non-
                                 connectorized single-mode bidirectional 1310 nm
                                 upstream and 1490 nm downstream WWDM devices for
88                               category C - Controlled environment
     EN 61753-121-2:2010         Fibre optic interconnecting devices and passive               NC   26 138 MCSI
                                 components - Performance standards -- Part 121-2:
                                 Simplex and duplex cords with singlemode fibre and
                                 cylindrical ferrule connectors for category C - Controlled
89                               environment
     EN 61753-121-3:2010         Fibre optic interconnecting devices and passive              NC    27 138 MCSI
                                 components - Performance standard -- Part 121-3:
                                 Simplex and duplex cords with single-mode fibre and
                                 cylindrical ferrule connectors for category U - Uncontrolled
90                               environment




                                           Pagina 30 din 346
      EN 61753-131-3:2011               Fibre optic interconnecting devices and passive            NC     24 138 MCSI
                                        components - Performance standard -- Part 131-3: Single-
                                        mode mechanical fibre splice for category U - Uncontrolled
 91                                     environment
      EN 62148-2:2011                   Fibre optic active components and devices - Package and      NC   19 138 MCSI
                                        interface standards -- Part 2: SFF 10-pin transceivers
 92
      EN 62148-3:2011                   Fibre optic active components and devices - Package and      NC   20 138 MCSI
                                        interface standards -- Part 3: SFF 20-pin transceivers
 93
      EN 62149-4:2010                   Fibre optic active components and devices - Performance      NC   19 138 MCSI
                                        standards -- Part 4: 1 300 nm fibre optic transceivers for
 94                                     Gigabit Ethernet application
      EN 62149-5:2011                   Fibre optic active components and devices - Performance      NC   31 138 MCSI
                                        standards -- Part 5: ATM-PON transceivers with LD driver
 95                                     and CDR ICs
      EN 62150-2:2011                   Fibre optic active components and devices - Test and   NC         27 138 MCSI
                                        measurement procedures -- Part 2: ATM-PON transceivers
 96
 97 EN 62343-2:2011                     Dynamic modules -- Part 2: Reliability qualification         NC   22 138 MCSI
    EN 62343-3-1:2010                   Dynamic modules - Part 3-1: Performance specification        NC   14 138 MCSI
 98                                     templates - Dynamic channel equalizers
    EN 62496-2-2:2011                   Optical circuit boards -- Part 2-2: Measurements -           NC   30 138 MCSI
 99                                     Dimensions of optical circuit boards
    EN 62496-3:2011                     Optical circuit boards -- Part 3: Performance standards -    NC   14 138 MCSI
100                                     General and guidance
    EN 62496-4:2011                     Optical circuit boards -- Part 4: Interface standards -      NC   33 138 MCSI
101                                     General and guidance
    EN 62614:2010                       Fibre optics - Launch condition requirements for             NC   15 138 MCSI
102                                     measuring multimode attenuation
    EN 14908-6:2010                     Open Data Communication in Building Automation,              NC   574 207 MCSI
                                        Controls and Building Management - Control Network
103                                     Protocol - Part 6: Application elements
      EN ISO 16484-1:2010               Building automation and control systems (BACS) - Part 1:     NC   27 207 MCSI
                                        Project specification and implementation (ISO 16484-
104                                     1:2010)
      EN ISO 16484-5:2010               Building automation and control systems - Part 5: Data       NC   706 207 MCSI
105                                     communication protocol (ISO 16484-5:2010)
      EN 50173-2:2007/A1:2010           Information technology - Generic cabling systems -- Part     NC   13 207 MCSI
106                                     2: Office premises
      EN 50173-2:2007/A1:2010/AC:2011                                                                ER    1 207 MCSI
107
      EN 50173-3:2007/A1:2010           Information technology - Generic cabling systems -- Part     NC   16 207 MCSI
108                                     3: Industrial premises
      EN 50173-3:2007/A1:2010/AC:2011                                                                ER    1 207 MCSI
109
      EN 50173-4:2007/A1:2010           Information technology - Generic cabling systems -- Part     NC   11 207 MCSI
110                                     4: Homes
      EN 50173-4:2007/A1:2010/AC:2011                                                                ER    2 207 MCSI
111
      EN 50173-5:2007/A1:2010           Information technology - Generic cabling systems -- Part     NC   18 207 MCSI
112                                     5: Data centres
      EN 50173-5:2007/A1:2010/AC:2011                                                                ER    1 207 MCSI
113
      EN 50174-1:2009/A1:2011           Information technology - Cabling installation -- Part 1:     NC   17 207 MCSI
114                                     Installation specification and quality assurance
      EN 50174-2:2009/A1:2011           Information technology - Cabling installation -- Part 2:     NC   52 207 MCSI
115                                     Installation planning and practices inside buildings
      EN 50174-2:2009/A1:2011/AC:2011                                                                ER    1 207 MCSI
116
      EN 50310:2010                     Application of equipotential bonding and earthing in         NC   35 207 MCSI
117                                     buildings with information technology equipment
      EN 50491-5-1:2010                 General requirements for Home and Building Electronic        NC   17 207 MCSI
                                        Systems (HBES) and Building Automation and Control
                                        Systems (BACS) -- Part 5-1: EMC requirements,
118                                     conditions and test set-up
      EN 50491-5-2:2010                 General requirements for Home and Building Electronic        NC   13 207 MCSI
                                        Systems (HBES) and Building Automation and Control
                                        Systems (BACS) -- Part 5-2: EMC requirements for
                                        HBES/BACS used in residential, commercial and light
119                                     industry environment




                                                  Pagina 31 din 346
      EN 50491-5-3:2010                 General requirements for Home and Building Electronic        NC    7 207 MCSI
                                        Systems (HBES) and Building Automation and Control
                                        Systems (BACS) -- Part 5-3: EMC requirements for
                                        HBES/BACS used in industry environment
120
      EN 50491-2:2010                   General requirements for Home and Building Electronic        NC   15 207 MCSI
                                        Systems (HBES) and Building Automation and Control
                                        Systems (BACS) -- Part 2: Environmental conditions
121
      EN 13710:2011                     European Ordering Rules - Ordering of characters from        NC   51 210 MCSI
                                        Latin, Greek, Cyrillic, Georgian and Armenian scripts
122
      EN 300 609-4 v9.2.1:2010          Global System for Mobile communications (GSM);Part 4:  NC         24 269 MCSI
                                        Harmonized EN for GSM Repeaters covering the essential
                                        requirements of article 3.2 of the R&TTE Directive
123
      EN 301 442 v1.2.1:2010            Satellite Earth Stations and Systems (SES);Harmonized        NC   40 269 MCSI
                                        EN for Mobile Earth Stations (MESs), including handheld
                                        earth stations, for Satellite Personal Communications
                                        Networks (S-PCN) in the 2,0 GHz bands under the Mobile
                                        Satellite Service (MSS) covering essential requirements
                                        underarticle 3.2 of the R&TTE directive
124
      EN 301 502 v9.2.1:2010            Global System for Mobile communications                      NC   109 269 MCSI
                                        (GSM);Harmonized EN for Base Station Equipment
                                        covering the essential requirements of article 3.2 of the
125                                     R&TTE Directive
      EN 302 574-1 v1.1.1:2010          Satellite Earth Stations and Systems (SES);Harmonized      NC     45 269 MCSI
                                        Standard for satellite earth stations for MSS operating in
                                        the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170
                                        MHz to 2 200 MHz (space-to-earth) frequency bands;Part
                                        1: Complementary Ground Component (CGC) for
                                        wideband systems: Harmonized EN covering the essential
                                        requirements of article 3.2 of the R&TTE Directive


126
      EN 302 574-2 v1.1.1:2010          Satellite Earth Stations and Systems (SES);Harmonized        NC   34 269 MCSI
                                        Standard for satellite earth stations for MSS operating in
                                        the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170
                                        MHz to 2 200 MHz (space-to-earth) frequency bands;Part
                                        2: User Equipment (UE) for wideband systems:
                                        Harmonized EN covering the essential requirements of
                                        article 3.2 of the R&TTE Directive
127
      EN 302 574-3 v1.1.1:2010          Satellite Earth Stations and Systems (SES);Harmonized        NC   39 269 MCSI
                                        Standard for satellite earth stations for MSS operating in
                                        the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170
                                        MHz to 2 200 MHz (space-to- earth) frequency bands;Part
                                        3: User Equipment (UE) for narrowband systems:
                                        Harmonized EN covering the essential requirements of
                                        article 3.2 of the R&TTE Directive
128
      EN ISO/IEC 15415:2005/AC:2011     Information technology - Automatic identification and data   ER   10 300 MCSI
                                        capture techniques - Bar code print quality test
                                        specification - Two-dimensional symbols - Technical
129                                     Corrigendum 1 (ISO/IEC 15415:2004/Cor 1:2008)
      EN ISO/IEC 15419:2010             Information technology - Automatic identification and data   NC   29 300 MCSI
                                        capture techniques - Bar code digital imaging and printing
                                        performance testing (ISO/IEC 15419:2009)
130
      EN ISO/IEC 15423:2010             Information technology - Automatic identification and data   NC   42 300 MCSI
                                        capture techniques - Bar code scanner and decoder
131                                     performance testing (ISO/IEC 15423:2009)
      EN ISO/IEC 15426-2:2006/AC:2011   Information technology - Automatic identification and data   ER    4 300 MCSI
                                        capture techniques - Bar code verifier conformance
                                        specification - Part 2: Two-dimensional symbols -
                                        Technical Corrigendum 1 (ISO/IEC 15426-2:2005/Cor
132                                     1:2008)
      EN ISO/IEC 15438:2010             Information technology - Automatic identification and data   NC   105 300 MCSI
                                        capture techniques - PDF417 bar code symbology
133                                     specification (ISO/IEC 15438:2006)




                                                  Pagina 32 din 346
      EN ISO 11073-10404:2011   Health informatics - Personal health device               NC         72 319 MCSI
                                communication - Part 10404: Device specialization - Pulse
134                             oximeter (ISO/IEEE 11073-10404:2010)
      EN ISO 11073-10407:2011   Health informatics - Personal health device               NC         44 319 MCSI
                                communication - Part 10407: Device specialization - Blood
                                pressure monitor (ISO/IEEE 11073-10407:2010)
135
      EN ISO 11073-10408:2011   Health informatics - Personal health device                     NC   41 319 MCSI
                                communication - Part 10408: Device specialization -
136                             Thermometer (ISO/IEEE 11073-10408:2010)
      EN ISO 11073-10415:2011   Health informatics - Personal health device                     NC   44 319 MCSI
                                communication - Part 10415: Device specialization -
137                             Weighing scale (ISO/IEEE 11073-10415:2010)
      EN ISO 11073-10417:2011   Health informatics - Personal health device                     NC   56 319 MCSI
                                communication - Part 10417: Device specialization -
138                             Glucose meter (ISO/IEEE 11073-10417:2010)
      EN ISO 11073-10471:2011   Health Informatics - Personal health device                     NC   57 319 MCSI
                                communication - Part 10471: Device specialization -
                                Independant living activity hub (ISO/IEEE 11073-
139                             10471:2010)
      EN ISO 11073-20601:2011   Health informatics - Personal health device                     NC   201 319 MCSI
                                communication - Part 20601: Application profile -
                                Optimized exchange protocol (ISO/IEEE 11073-
140                             20601:2010)
      EN ISO 12052:2011         Health informatics - Digital imaging and communication in       NC   14 319 MCSI
                                medicine (DICOM) including workflow and data
141                             management (ISO 12052:2006)
      EN ISO 12967-1:2011       Health informatics - Service architecture - Part 1:             NC   54 319 MCSI
142                             Enterprise viewpoint (ISO 12967-1:2009)
      EN ISO 12967-2:2011       Health informatics - Service architecture - Part 2:             NC   61 319 MCSI
143                             Information viewpoint (ISO 12967-2:2009)
      EN ISO 12967-3:2011       Health informatics - Service architecture - Part 3:             NC   30 319 MCSI
144                             Computational viewpoint (ISO 12967-3:2009)
      EN ISO 21090:2011         Health Informatics - Harmonized data types for information      NC   198 319 MCSI
145                             interchange (ISO 21090:2011)
146 EN 60268-4:2010             Sound system equipment -- Part 4: Microphones                   NC   53 375 MCSI
    EN 60268-7:2011             Sound system equipment -- Part 7: Headphones and                NC   50 375 MCSI
147                             earphones
148 EN 60461:2011               Time and control code                                           NC   46 375 MCSI
      EN 60728-3:2011           Cable networks for television signals, sound signals and        NC   68 375 MCSI
                                interactive services -- Part 3: Active wideband equipment
149                             for cable networks
      EN 61834-4:1998/A1:2011   Recording - Helical-scan digital video cassette recording       NC   25 375 MCSI
                                system using 6,35 mm magnetic tape for consumer use
                                (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4:
                                Pack header table and contents
150
      EN 61937-11:2010          Digital audio - Interface for non-linear PCM encoded audio NC        19 375 MCSI
                                bitstreams applying IEC 60958 -- Part 11: MPEG-4 AAC
151                             and its extensions in LATM/LOAS
      EN 61937-12:2010          Digital audio - Interface for non-linear PCM encoded audio NC        17 375 MCSI
                                bitstreams applying IEC 60958 -- Part 12: Non-linear PCM
152                             bitstreams according to the DRA formats
      EN 61966-12-1:2011        Multimedia systems and equipment - Colour measurement NC             41 375 MCSI
                                and management -- Part 12-1: Metadata for identification
153                             of colour gamut (Gamut ID)
      EN 62455:2011             Internet protocol (IP) and transport stream (TS) based          NC   413 375 MCSI
154                             service access
      EN 62458:2011             Sound system equipment - Electroacoustic transducers -          NC   26 375 MCSI
                                Measurement of large signal parameters
155
      EN 62459:2011             Sound system equipment - Electroacoustic transducers -          NC   22 375 MCSI
156                             Measurement of suspension parts
      EN 62481-3:2011           Digital living network alliance (DLNA) home networked           NC   71 375 MCSI
                                device interoperability guidelines -- Part 3: Link protection
157
158 EN 62514:2010               Multimedia gateway in home networks - Guidelines                NC   60 375 MCSI
    EN 62524:2011               Multimedia systems and equipment - Multimedia e-                NC   54 375 MCSI
                                publishing and e-books - Reader's format for e-publishing
159




                                           Pagina 33 din 346
      EN 62537:2010         Interface for loudspeakers with digital input signals based   NC   29 375 MCSI
160                         on IEC 60958
161 EN 62571:2011           Digital audiobook file format and player requirements         NC   107 375 MCSI
    EN 62574:2011           Audio, video and multimedia systems - General channel         NC   15 375 MCSI
162                         assignment of multichannel audio
    EN 62637-1:2011         Battery charging interface for small handheld multimedia      NC   24 375 MCSI
163                         devices - Part 1: 2 mm barrel interface
    EN 62637-2:2011         Battery charging interface for small handheld multimedia      NC   21 375 MCSI
                            devices -- Part 2: 2 mm barrel type interface conformance
164                         testing
      EN 62684:2010         Interoperability specifications of common external power NC        12 375 MCSI
                            supply (EPS) for use with data-enabled mobile telephones
165
166 EN 15943:2011           Curriculum Exchange Format (CEF) - Data model                 NC   19 379 MCSI
    EN 15981:2011           European Learner Mobility - Achievement information           NC   43 379 MCSI
167                         (EuroLMAI)
    EN 331:1998/A1:2010     Manually operated ball valves and closed bottom taper         NC   30   89 MDRT
168                         plug valves for gas installations for buildings
    EN 196-5:2011           Methods of testing cement - Part 5: Pozzolanicity test for    NC   12 111 MDRT
169                         pozzolanic cement
    EN 413-1:2011           Masonry cement - Part 1: Composition, specifications and      NC   26 111 MDRT
170                         conformity criteria
    EN 459-1:2010           Building lime - Part 1: Definitions, specifications and       NC   48 111 MDRT
171                         conformity criteria
172 EN 459-2:2010           Building lime - Part 2: Test methods                          NC   64 111 MDRT
173 EN 459-3:2011           Building lime - Part 3: Conformity evaluation                 NC   14 111 MDRT
    EN 12859:2011           Gypsum blocks - Definitions, requirements and test            NC   34 111 MDRT
174                         methods
    EN 12326-2:2011         Slate and stone for discontinuous roofing and external        NC   49 113 MDRT
                            cladding - Part 2: Methods of test for slate and carbonate
175                         slate
      EN 15812:2011         Polymer modified bituminous thick coatings for                NC    9 113 MDRT
                            waterproofing - Determination of crack bridging ability
176
      EN 15813:2011         Polymer modified bituminous thick coatings for                NC    6 113 MDRT
                            waterproofing - Determination of flexibility at low
177                         temperatures
      EN 15815:2011         Polymer modified bituminous thick coatings for                NC    7 113 MDRT
178                         waterproofing - Resistance to compression
      EN 15816:2011         Polymer-modified bituminous thick coatings for                NC    7 113 MDRT
179                         waterproofing - Resistance to rain
      EN 15817:2011         Polymer modified bituminous thick coatings for                NC    5 113 MDRT
180                         waterproofing - Water resistance
      EN 15818:2011         Polymer modified bituminous thick coatings for                NC    6 113 MDRT
                            waterproofing - Determination of dimensional stability at
181                         high temperature
      EN 15819:2011         Polymer modified bituminous thick coatings for                NC    6 113 MDRT
                            waterproofing - Reduction of the thickness of the layer
182                         when fully dried
      EN 15820:2011         Polymer modified bituminous thick coatings for                NC    8 113 MDRT
183                         waterproofing - Determination of watertightness
      EN 15976:2011         Flexible sheets for waterproofing - Determination of          NC   10 113 MDRT
184                         emissivity
185 EN 14055:2010           WC and urinal flushing cisterns                               NC   44 114 MDRT
186 EN 14516:2006+A1:2010   Baths for domestic purposes                                   NC   23 114 MDRT
187 EN 14527:2006+A1:2010   Shower trays for domestic purposes                            NC   21 114 MDRT
    EN 16140:2011           Natural stone test methods - Determination of sensitivity to NC    12 115 MDRT
                            changes in appearance produced by thermal cycles
188
      EN 410:2011           Glass in building - Determination of luminous and solar       NC   60 122 MDRT
189                         characteristics of glazing
      EN 673:2011           Glass in building - Determination of thermal transmittance    NC   18 122 MDRT
190                         (U value) - Calculation method
      EN 674:2011           Glass in building - Determination of thermal transmittance    NC   12 122 MDRT
191                         (U value) - Guarded hot plate method
      EN 675:2011           Glass in building - Determination of thermal transmittance    NC   14 122 MDRT
192                         (U value) - Heat flow meter method
      EN 12758:2011         Glass in building - Glazing and airborne sound insulation -   NC   19 122 MDRT
                            Product descriptions and determination of properties
193




                                       Pagina 34 din 346
      EN 15998:2010             Glass in building - Safety in case of fire, fire resistance - NC     18 122 MDRT
                                Glass testing methodology for the purpose of classification
194
      HD 60364-4-42:2011        Low voltage electrical installations -- Part 4-42: Protection   NC   30 136 MDRT
                                for safety - Protection against thermal effects
195
      HD 60364-4-444:2010       Low-voltage electrical installations -- Part 4-444:             NC   37 136 MDRT
                                Protection for safety - Protection against voltage
196                             disturbances and electromagnetic disturbances
      EN 13341:2005+A1:2011     Static thermoplastic tanks for above ground storage of  NC           38 169 MDRT
                                domestic heating oils, kerosene and diesel fuels - Blow
                                moulded and rotationally moulded polyethylene tanks and
                                rotationally moulded tanks made of anionically
                                polymerized polyamide 6 - Requirements and test methods
197
      EN 476:2011               General requirements for components used in drains and NC            25 186 MDRT
198                             sewers
      EN 13508-2:2003+A1:2011   Investigation and assessment of drain and sewer systems NC           151 186 MDRT
                                outside buildings - Part 2: Visual inspection coding system
199
      EN 15885:2010             Classification and characteristics of techniques for            NC   39 186 MDRT
200                             renovation and repair of drains and sewers
      EN 1317-1:2010            Road restraint systems - Part 1: Terminology and general        NC   35 187 MDRT
201                             criteria for test methods
      EN 1317-3:2010            Road restraint systems - Part 3: Performance classes,           NC   25 187 MDRT
                                impact test acceptance criteria and test methods for crash
202                             cushions
      EN 1794-1:2011            Road traffic noise reducing devices - Non-acoustic              NC   27 187 MDRT
                                performance - Part 1: Mechanical performance and
203                             stability requirements
      EN 1794-2:2011            Road traffic noise reducing devices - Non-acoustic              NC   26 187 MDRT
                                performance - Part 2: General safety and environmental
204                             requirements
205 EN 1824:2011                Road marking materials - Road trials                            NC   37 187 MDRT
    EN 12697-44:2010            Bituminous mixtures - Test methods for hot mix asphalt -        NC   15 187 MDRT
                                Part 44: Crack propagation by semi-circular bending test
206
      EN 12802:2011             Road marking materials - Laboratory methods for                 NC   35 187 MDRT
207                             identification
208 EN 13197:2011               Road marking materials - Wear simulator Turntable               NC   26 187 MDRT
    EN 13212:2011               Road marking materials - Requirements for factory               NC   14 187 MDRT
209                             production control
    EN 13459:2011               Road marking materials - Sampling from storage and              NC   10 187 MDRT
210                             testing
    EN 12101-7:2011             Smoke and heat control systems - Part 7: Smoke duct             NC   30 216 MDRT
211                             sections
    EN 12101-8:2011             Smoke and heat control systems - Part 8: Smoke control          NC   38 216 MDRT
212                             dampers
    EN 12464-1:2011             Light and lighting - Lighting of work places - Part 1: Indoor   NC   57 240 MDRT
213                             work places
    EN 15979:2011               Testing of ceramic raw and basic materials - Direct             NC   22 258 MDRT
                                determination of mass fractions of impurities in powders
                                and granules of silicon carbide by OES by DC arc
214                             excitation
      EN 15991:2011             Testing of ceramic and basic materials - Direct                 NC   28 258 MDRT
                                determination of mass fractions of impurities in powders
                                and granules of silicon carbide by inductively coupled
                                plasma optical emission spectrometry (ICP OES) with
                                electrothermal vaporisation (ETV)
215
      EN ISO 10140-1:2010       Acoustics - Laboratory measurement of sound insulation          NC   35 276 MDRT
                                of building elements - Part 1: Application rules for specific
216                             products (ISO 10140-1:2010)
      EN ISO 10140-5:2010       Acoustics - Laboratory measurement of sound insulation          NC   38 276 MDRT
                                of building elements - Part 5: Requirements for test
217                             facilities and equipment (ISO 10140-5:2010)
      EN 12354-5:2009/AC:2010   Building acoustics - Estimation of acoustic performance of ER         3 276 MDRT
                                building from the performance of elements - Part 5:
                                Sounds levels due to the service equipment
218




                                           Pagina 35 din 346
      EN ISO 15186-2:2010       Acoustics - Measurement of sound insulation in buildings      NC   28 276 MDRT
                                and of building elements using sound intensity - Part 2:
                                Field measurements (ISO 15186-2:2003)
219
      EN ISO 15186-3:2010       Acoustics - Measurement of sound insulation in buildings      NC   17 276 MDRT
                                and of building elements using sound intensity - Part 3:
                                Laboratory measurements at low frequencies (ISO 15186-
220                             3:2002)
      EN ISO 12567-1:2010       Thermal performance of windows and doors -              NC         56 281 MDRT
                                Determination of thermal transmittance by the hot-box
                                method - Part 1: Complete windows and doors (ISO 12567-
221                             1:2010)
      EN ISO 23993:2010         Thermal insulation products for building equipment and     NC      34 281 MDRT
                                industrial installations - Determination of design thermal
                                conductivity (ISO 23993:2008, Corrected version 2009-10-
222                             01)
      EN 488:2011               District heating pipes - Preinsulated bonded pipe systems     NC   30 302 MDRT
                                for directly buried hot water networks - Steel valve
                                assembly for steel service pipes, polyurethane thermal
                                insulation and outer casing of polyethylene
223
      EN 1264-1:2011            Water based surface embedded heating and cooling          NC       23 302 MDRT
224                             systems - Part 1: Definitions and symbols
      EN 12975-1:2006+A1:2010   Thermal solar systems and components - Solar collectors - NC       15 302 MDRT
225                              Part 1: General requirements
      EN 13141-2:2010           Ventilation for buildings - Performance testing of        NC       23 302 MDRT
                                components/products for residential ventilation - Part 2:
226                             Exhaust and supply air terminal devices
      EN 13141-7:2010           Ventilation for buildings - Performance testing of            NC   36 302 MDRT
                                components/products for residential ventilation - Part 7:
                                Performance testing of a mechanical supply and exhaust
                                ventilation units (including heat recovery) for mechanical
                                ventilation systems intended for single family dwellings
227
      EN 15316-4-8:2011         Heating systems in buildings - Method for calculation of  NC       37 302 MDRT
                                system energy requirements and system efficiencies - Part
                                4-8: Space heating generation systems, air heating and
                                overhead radiant heating systems
228
      EN 15821:2010             Multi-firing sauna stoves fired by natural wood logs -        NC   54 305 MDRT
229                             Requirements and test methods
      EN 1627:2011              Pedestrian doorsets, windows, curtain walling, grilles and    NC   31 318 MDRT
                                shutters - Burglar resistance - Requirements and
230                             classification
      EN 1628:2011              Pedestrian doorsets, windows, curtain walling, grilles and    NC   67 318 MDRT
                                shutters - Burglar resistance - Test method for the
                                determination of resistance under static loading
231
      EN 1629:2011              Pedestrian doorsets, windows, curtain walling, grilles and    NC   34 318 MDRT
                                shutters - Burglar resistance - Test method for the
                                determination of resistance under dynamic loading
232
      EN 1630:2011              Pedestrian doorsets, windows, curtain walling, grilles and    NC   37 318 MDRT
                                shutters - Burglar resistance - Test method for the
                                determination of resistance to manual burglary attempts
233
      EN 13126-19:2011          Building hardware - Requirements and test methods for         NC   14 318 MDRT
                                windows and door height windows - Part 19: Sliding
234                             Closing Devices
      EN 13241-1:2003+A1:2011   Industrial, commercial and garage doors and gates -           NC   28 318 MDRT
                                Product standard - Part 1: Products without fire resistance
235                             or smoke control characteristics
      EN 13420:2011             Windows - Behaviour between different climates - Test      NC      13 318 MDRT
236                             method
      EN 480-1:2006+A1:2011     Admixtures for concrete, mortar and grout - Test methods - NC      11 321 MDRT
                                 Part 1: Reference concrete and reference mortar for
237                             testing
      EN 480-13:2009+A1:2011    Admixtures for concrete, mortar and grout - Test methods - NC      7 321 MDRT
                                 Part 13: Reference masonry mortar for testing mortar
238                             admixtures




                                          Pagina 36 din 346
      EN 1097-1:2011            Tests for mechanical and physical properties of                 NC   13 321 MDRT
                                aggregates - Part 1: Determination of the resistance to
239                             wear (micro-Deval)
      EN 1367-5:2011            Tests for thermal and weathering properties of aggregates NC          8 321 MDRT
                                - Part 5: Determination of resistance to thermal shock
240
      EN 1520:2011              Prefabricated reinforced components of lightweight              NC   108 321 MDRT
                                aggregate concrete with open structure with structural or
241                             non-structural reinforcement
      EN 15037-2:2009+A1:2011   Precast concrete products - Beam-and-block floor systems NC          36 321 MDRT
242                             - Part 2: Concrete blocks
      EN 15037-3:2009+A1:2011   Precast concrete products - Beam-and-block floor systems NC          40 321 MDRT
243                             - Part 3: Clay blocks
      EN 408:2010               Timber structures - Structural timber and glued laminated NC         36 326 MDRT
                                timber - Determination of some physical and mechanical
244                             properties
      EN 594:2011               Timber structures - Test methods - Racking strength and         NC   15 326 MDRT
245                             stiffness of timber frame wall panels
      EN 14081-1:2005+A1:2011   Timber structures - Strength graded structural timber with      NC   32 326 MDRT
                                rectangular cross section - Part 1: General requirements
246
247 EN 14229:2010               Structural timber - Wood poles for overhead lines               NC   40 326 MDRT
    EN ISO 8394-1:2010          Building construction - Jointing products - Part 1:             NC    8 335 MDRT
                                Determination of extrudability of sealants (ISO 8394-
248                             1:2010)
      EN ISO 8394-2:2010        Building construction - Jointing products - Part 2:             NC   11 335 MDRT
                                Determination of extrudability of sealants using
249                             standardized apparatus (ISO 8394-2:2010)
      EN 15643-1:2010           Sustainability of construction works - Sustainability           NC   26 335 MDRT
250                             assessment of buildings - Part 1: General framework
      EN 15643-2:2011           Sustainability of construction works - Assessment of            NC   32 335 MDRT
                                buildings - Part 2: Framework for the assessment of
251                             environmental performance
      EN 50536:2011             Protection against lightning - Thunderstorm warning             NC   42 346 MDRT
252                             systems
      EN 50536:2011/AC:2011     Protection against lightning - Thunderstorm warning             ER    1 346 MDRT
253                             systems
      EN 62305-1:2011           Protection against lightning -- Part 1: General principles      NC   70 346 MDRT
254
      EN 62305-4:2011           Protection against lightning -- Part 4: Electrical and       NC      91 346 MDRT
255                             electronic systems within structures
      EN 771-1:2011             Specification for masonry units - Part 1: Clay masonry units NC      47 347 MDRT
256
      EN 771-2:2011             Specification for masonry units - Part 2: Calcium silicate      NC   36 347 MDRT
257                             masonry units
      EN 771-3:2011             Specification for masonry units - Part 3: Aggregate             NC   38 347 MDRT
                                concrete masonry units (Dense and lightweight
258                             aggregates)
      EN 771-4:2011             Specification for masonry units - Part 4: Autoclaved            NC   32 347 MDRT
259                             aerated concrete masonry units
      EN 771-5:2011             Specification for masonry units - Part 5: Manufactured          NC   31 347 MDRT
260                             stone masonry units
      EN 771-6:2011             Specification for masonry units - Part 6: Natural stone         NC   29 347 MDRT
261                             masonry units
      EN 772-1:2011             Methods of test for masonry units - Part 1: Determination       NC   12 347 MDRT
262                             of compressive strength
      EN 772-11:2011            Methods of test for masonry units - Part 11: Determination      NC    8 347 MDRT
                                of water absorption of aggregate concrete, autoclaved
                                aerated concrete, manufactured stone and natural stone
                                masonry units due to capillary action and the initial rate of
                                water absorption of clay masonry units
263
      EN 772-16:2011            Methods of test for masonry units - Part 16: Determination NC        15 347 MDRT
264                             of dimensions
      EN 772-18:2011            Methods of test for masonry units - Part 18: Determination NC         7 347 MDRT
                                of freeze-thaw resistance of calcium silicate masonry units
265
      EN 772-21:2011            Methods of test for masonry units - Part 21: Determination      NC    6 347 MDRT
                                of water absorption of clay and calcium silicate masonry
                                units by cold water absorption
266




                                          Pagina 37 din 346
      EN 998-1:2010         Specification for mortar for masonry - Part 1: Rendering      NC   24 347 MDRT
267                         and plastering mortar
      EN 998-2:2010         Specification for mortar for masonry - Part 2: Masonry        NC   28 347 MDRT
268                         mortar
269 EN 1858:2008+A1:2011    Chimneys - Components - Concrete flue blocks                  NC   55 347 MDRT
    EN 12446:2011           Chimneys - Components - Concrete outer wall elements          NC   33 347 MDRT
270
271 EN 1536:2010            Execution of special geotechnical work - Bored piles          NC   80 361 MDRT
      EN 1538:2010          Execution of special geotechnical work - Diaphragm walls      NC   49 361 MDRT
272
      EN ISO 10769:2011     Clay geosynthetic barriers - Determination of water           NC   10 364 MDRT
273                         absorption of bentonite (ISO 10769:2011)
      EN ISO 10773:2011     Clay geosynthetic barriers - Determination of permeability    NC   12 364 MDRT
274                         to gases (ISO 10773:2011)
      EN 60034-18-1:2010    Rotating electrical machines -- Part 18-1: Functional         NC   21   1 MECMA
275                         evaluation of insulation systems - General guidelines
      EN 60034-18-32:2010   Rotating electrical machines -- Part 18-32: Functional        NC   19   1 MECMA
                            evaluation of insulation systems - Test procedures for
                            form-wound windings - Evaluation by electrical endurance
276
      EN 60034-2-2:2010     Rotating electrical machines -- Part 2-2: Specific methods    NC   29   1 MECMA
                            for determining separate losses of large machines from
277                         tests - Supplement to IEC 60034-2-1
      EN 61666:2010         Industrial systems, installations and equipment and           NC   19   2 MECMA
                            industrial products - Identification of terminals within a
278                         system
      EN 62507-1:2011       Identification systems enabling unambiguous information       NC   60   2 MECMA
                            interchange - Requirements -- Part 1: Principles and
279                         methods
      EN 50541-1:2011       Three phase dry-type distribution transformers 50 Hz, from NC      20   3 MECMA
                            100 kVA to 3 150 kVA, with highest voltage for equipment
                            not exceeding 36 kV -- Part 1: General requirements
280
      EN 60076-2:2011       Power transformers -- Part 2: Temperature rise for liquid-    NC   51   3 MECMA
281                         immersed transformers
      EN 60684-3-209:2010   Flexible insulating sleeving -- Part 3: Specifications for    NC   12   5 MECMA
                            individual types of sleeving -- Sheet 209: Heat-shrinkable
                            polyolefin sleeving, general purpose, flame retarded
282
      EN 60684-3-280:2010   Flexible insulating sleeving -- Part 3: Specifications for    NC   14   5 MECMA
                            individual types of sleeving -- Sheet 280: Heat-shrinkable,
283                         polyolefin sleeving, anti-tracking
      EN 60684-3-281:2010   Flexible insulating sleeving -- Part 3: Specifications for    NC   13   5 MECMA
                            individual types of sleeving -- Sheet 281: Heat-shrinkable,
284                         polyolefin sleeving, semiconductive
      EN 60684-3-282:2010   Flexible insulating sleeving -- Part 3: Specifications for    NC   12   5 MECMA
                            individual types of sleeving -- Sheet 282: Heat-shrinkable,
285                         polyolefin sleeving - Stress control
      EN 60684-3-283:2011   Flexible insulating sleeving -- Part 3: Specifications for    NC   14   5 MECMA
                            individual types of sleeving -- Sheet 283: Heat-shrinkable,
286                         polyolefin sleeving, for bus-bar insulation
      EN 60763-1:2011       Laminated pressboard for electrical purposes -- Part 1:       NC    9   5 MECMA
                            Definitions, classification and general requirements
287
      EN 60763-3-1:2011     Laminated pressboard for electrical purposes -- Part 3:       NC    8   5 MECMA
                            Specifications for individual materials -- Sheet 1:
                            Requirements for laminated precompressed pressboard,
288                         Types LB 3.1A.1 and LB3.1A.2
      EN 62329-3-100:2010   Heat-shrinkable moulded shapes -- Part 3: Specification  NC        34   5 MECMA
                            requirements for shape dimensions, material requirements
                            and compatibility performance -- Sheet 100: Heat-
                            shrinkable moulded shape dimensions
289
      EN 62329-3-101:2010   Heat-shrinkable moulded shapes -- Part 3: Specification    NC      15   5 MECMA
                            requirements for shape dimensions, material requirements
                            and compatibility performance -- Sheet 101: Heat-
                            shrinkable moulded shapes, polyolefin, semi-rigid, limited
                            fire hazard, material requirements and system performance
290




                                       Pagina 38 din 346
      EN 62329-3-102:2010          Heat-shrinkable moulded shapes -- Part 3: Specification  NC           13   5 MECMA
                                   requirements for shape dimensions, material requirements
                                   and compatibility performance -- Sheet 102: Heat-
                                   shrinkable elastomeric moulded shapes, semi-rigid,
                                   material requirements and system performance
291
292 EN 50191:2010                  Erection and operation of electrical test equipment             NC    23   8 MECMA
    EN 50532:2010                  Compact Equipment Assembly for Distribution Substations NC            63   8 MECMA
293                                (CEADS)
    EN 60060-2:2011                High-voltage test techniques -- Part 2: Measuring systems NC          78   8 MECMA
294
    EN 62271-101:2006/A1:2010      High-voltage switchgear and controlgear -- Part 101:            NC    19   8 MECMA
295                                Synthetic testing
    EN 62271-206:2011              High-voltage switchgear and controlgear -- Part 206:            NC    28   8 MECMA
                                   Voltage presence indicating systems for rated voltages
296                                above 1 kV and up to and including 52 kV
      EN 62475:2010                High-current test techniques - Definitions and                  NC   110   8 MECMA
                                   requirements for test currents and measuring systems
297
      EN 61439-5:2011              Low-voltage switchgear and controlgear assemblies -- Part NC          31   9 MECMA
                                   5: Assemblies for power distribution in public networks
298
      EN 50085-2-3:2010            Cable trunking systems and cable ducting systems for            NC    17   11 MECMA
                                   electrical installations -- Part 2-3: Particular requirements
                                   for slotted cable trunking systems intended for installation
299                                in cabinets
      EN 50550:2011                Power frequency overvoltage protective device for               NC    44   11 MECMA
300                                household and similar applications (POP)
      EN 61058-2-5:2011            Switches for appliances -- Part 2-5: Particular                 NC    13   11 MECMA
301                                requirements for change-over selectors
302 EN 60127-2:2003/A2:2010        Miniature fuses -- Part 2: Cartridge fuse-links                 NC     5   12 MECMA
    EN 60269-6:2011                Low-voltage fuses -- Part 6: Supplementary requirements NC            32   12 MECMA
                                   for fuse-links for the protection of solar photovoltaic energy
303                                systems
      EN 50180:2010                Bushings above 1 kV up to 52 kV and from 250 A to 3,15          NC    37   15 MECMA
304                                kA for liquid filled transformers
      EN 50181:2010                Plug-in type bushings above 1 kV up to 52 kV and from           NC    11   15 MECMA
                                   250 A to 2,50 kA for equipment other than liquid filled
305                                transformers
      EN 50386:2010                Bushings up to 1 kV and from 250 A to 5 kA, for liquid          NC     8   15 MECMA
306                                filled transformers
      EN 60709:2010                Nuclear power plants - Instrumentation and control              NC    23   16 MECMA
307                                systems important to safety - Separation
308 EN 60964:2010                  Nuclear power plants - Control rooms - Design                   NC    44   16 MECMA
    EN 61226:2010                  Nuclear power plants - Instrumentation and control              NC    36   16 MECMA
                                   important to safety - Classification of instrumentation and
309                                control functions
      EN 62340:2010                Nuclear power plants - Instrumentation and control         NC         26   16 MECMA
                                   systems important to safety - Requirements for coping with
310                                Common Cause Failure (CCF)
      EN 60191-6-17:2011           Mechanical standardization of semiconductor devices --          NC    30   17 MECMA
                                   Part 6-17: General rules for the preparation of outline
                                   drawings of surface mounted semiconductor device
                                   packages - Design guide for stacked packages - Fine-
                                   pitch ball grid array and fine-pitch land grid array (P-
311                                PFBGA and P-PFLGA)
      EN 60191-6-20:2010           Mechanical standardization of semiconductor devices --  NC            14   17 MECMA
                                   Part 6-20: General rules for the preparation of outline
                                   drawings of surface mounted semiconductor device
                                   packages - Measuring methods for package dimensions of
                                   small outline J-lead packages (SOJ)
312
      EN 60191-6-21:2010           Mechanical standardization of semiconductor devices --  NC            17   17 MECMA
                                   Part 6-21: General rules for the preparation of outline
                                   drawings of surface mounted semiconductor device
                                   packages - Measuring methods for package dimensions of
                                   small outline packages (SOP)
313
      EN 60747-16-4:2004/A1:2011   Semiconductor devices -- Part 16-4: Microwave integrated NC            9   17 MECMA
314                                circuits - Switches




                                              Pagina 39 din 346
      EN 60747-5-5:2011          Semiconductor devices - Discrete devices -- Part 5-5:          NC   56   17 MECMA
315                              Optoelectronic devices - Photocouplers
      EN 60749-15:2010           Semiconductor devices - Mechanical and climatic test           NC    9   17 MECMA
                                 methods -- Part 15: Resistance to soldering temperature
316                              for through-hole mounted devices
      EN 60749-19:2003/A1:2010   Semiconductor devices - Mechanical and climatic test           NC    4   17 MECMA
317                              methods -- Part 19: Die shear strength
      EN 60749-23:2004/A1:2011   Semiconductor devices - Mechanical and climatic test           NC    5   17 MECMA
                                 methods -- Part 23: High temperature operating life
318
      EN 60749-32:2003/A1:2010   Semiconductor devices - Mechanical and climatic test           NC    5   17 MECMA
                                 methods -- Part 32: Flammability of plastic-encapsulated
319                              devices (externally induced)
      EN 61747-5-3:2010          Liquid crystal display devices -- Part 5-3: Environmental,     NC   24   17 MECMA
                                 endurance and mechanical test methods - Glass strength
320                              and reliability
      EN 62047-4:2010            Semiconductor devices - Micro-electromechanical devices NC          22   17 MECMA
321                              -- Part 4: Generic specification for MEMS
      EN 62047-8:2011            Semiconductor devices - Micro-electromechanical devices NC          20   17 MECMA
                                 -- Part 8: Strip bending test method for tensile property
322                              measurement of thin films
      EN 62132-2:2011            Integrated circuits - Measurement of electromagnetic           NC   28   17 MECMA
                                 immunity -- Part 2: Measurement of radiated immunity -
323                              TEM cell and wideband TEM cell method
      EN 62258-1:2010            Semiconductor die products -- Part 1: Procurement and          NC   48   17 MECMA
324                              use
      EN 62341-6-1:2011          Organic light emitting diode (OLED) displays -- Part 6-1:      NC   30   17 MECMA
                                 Measuring methods of optical and electro-optical
325                              parameters
      EN 62415:2010              Semiconductor devices - Constant current                       NC   13   17 MECMA
326                              electromigration test
      EN 62416:2010              Semiconductor devices - Hot carrier test on MOS                NC   12   17 MECMA
327                              transistors
      EN 62418:2010              Semiconductor devices - Metallization stress void test         NC   19   17 MECMA
328
      EN 60122-3:2010            Quartz crystal units of assessed quality -- Part 3: Standard NC     26   18 MECMA
329                              outlines and lead connections
      EN 60368-3:2010            Piezoelectric filters of assessed quality -- Part 3: Standard NC    18   18 MECMA
330                              outlines and lead connections
      EN 60444-11:2010           Measurement of quartz crystal unit parameters -- Part 11: NC        17   18 MECMA
                                 Standard method for the determination of the load
                                 resonance frequency fL and the effective load capacitance
                                 CLeff using automatic network analyzer techniques and
331                              error correction
      EN 60679-6:2011            Quartz crystal controlled oscillators of assessed quality -- NC     24   18 MECMA
                                 Part 6: Phase jitter measurement method for quartz crystal
                                 oscillators and SAW oscillators - Application guidelines
332
      EN 60068-2-5:2011          Environmental testing -- Part 2-5: Tests - Test Sa:            NC   22   19 MECMA
                                 Simulated solar radiation at ground level and guidance for
333                              solar radiation testing
      EN 60068-2-53:2010         Environmental testing -- Part 2-53: Tests and guidance:        NC   20   19 MECMA
                                 Combined climatic (temperature/humidity) and dynamic
334                              (vibration/shock) tests
      EN 60401-2:2010            Terms and nomenclature for cores made of magnetically          NC   12   20 MECMA
                                 soft ferrites -- Part 2: Reference of dimensions
335
      EN 62317-2:2010            Ferrite cores - Dimensions -- Part 2: Pot-cores for use in     NC   16   20 MECMA
                                 telecommunications, power supply, and filter applications
336
      EN 60264-4-1:2010          Packaging of winding wires -- Part 4-1: Methods of test -      NC   16   21 MECMA
                                 Delivery spools made from thermoplastic materials
337
      EN 60317-26:1996/A2:2010   Specifications for particular types of winding wires -- Part   NC    6   21 MECMA
                                 26: Polyamide-imide enamelled round copper wire, class
338                              200
      EN 60317-29:1996/A2:2010   Specifications for particular types of winding wires -- Part NC      6   21 MECMA
                                 29: Polyester or polyesterimide overcoated with polyamide-
                                 imide enamelled rectangular copper wire, class 200
339




                                            Pagina 40 din 346
      EN 60317-57:2010    Specifications for particular types of winding wires -- Part   NC    12   21 MECMA
                          57: Polyamide-imide enamelled round copper wire, class
340                       220
      EN 60317-58:2010    Specifications for particular types of winding wires -- Part   NC    11   21 MECMA
                          58: Polyamide-imide enamelled rectangular copper wire,
341                       class 220
      EN 60317-8:2010     Specifications for particular types of winding wires -- Part   NC    12   21 MECMA
                          8: Polyesterimide enamelled round copper wire, class 180
342
      EN 50325-5:2010     Industrial communications subsystem based on ISO               NC    36   23 MECMA
                          11898 (CAN) for controller-device interfaces -- Part 5:
                          Functional safety communication based on EN 50325-4
343
      EN 60534-2-1:2011   Industrial-process control valves -- Part 2-1: Flow capacity - NC    59   23 MECMA
                           Sizing equations for fluid flow under installed conditions
344
      EN 60534-7:2010     Industrial-process control valves -- Part 7: Control valve     NC    21   23 MECMA
345                       data sheet
      EN 60534-8-3:2011   Industrial-process control valves -- Part 8-3: Noise           NC    51   23 MECMA
                          considerations - Control valve aerodynamic noise
346                       prediction method
      EN 60770-1:2011     Transmitters for use in industrial-process control systems -- NC     25   23 MECMA
                          Part 1: Methods for performance evaluation
347
      EN 60770-2:2010     Transmitters for use in industrial-process control systems -- NC     19   23 MECMA
                          Part 2: Methods for inspection and routine testing
348
      EN 61158-2:2010     Industrial communication networks - Fieldbus                   NC   406   23 MECMA
                          specifications -- Part 2: Physical layer specification and
349                       service definition
      EN 61207-1:2010     Expression of performance of gas analyzers -- Part 1:          NC    43   23 MECMA
350                       General
      EN 61508-1:2010     Functional safety of electrical/electronic/programmable        NC    67   23 MECMA
                          electronic safety-related systems -- Part 1: General
351                       requirements
      EN 61508-2:2010     Functional safety of electrical/electronic/programmable        NC    98   23 MECMA
                          electronic safety-related systems -- Part 2: Requirements
                          for electrical/electronic/programmable electronic safety-
                          related systems
352
      EN 61508-3:2010     Functional safety of electrical/electronic/programmable        NC   120   23 MECMA
                          electronic safety-related systems -- Part 3: Software
353                       requirements
      EN 61508-4:2010     Functional safety of electrical/electronic/programmable        NC    37   23 MECMA
                          electronic safety-related systems -- Part 4: Definitions and
                          abbreviations
354
      EN 61508-5:2010     Functional safety of electrical/electronic/programmable        NC    52   23 MECMA
                          electronic safety-related systems -- Part 5: Examples of
                          methods for the determination of safety integrity levels
355
      EN 61508-6:2010     Functional safety of electrical/electronic/programmable        NC   122   23 MECMA
                          electronic safety-related systems -- Part 6: Guidelines on
                          the application of IEC 61508-2 and IEC 61508-3
356
      EN 61508-7:2010     Functional safety of electrical/electronic/programmable        NC   152   23 MECMA
                          electronic safety-related systems -- Part 7: Overview of
                          techniques and measures
357
358 EN 61512-4:2010       Batch control -- Part 4: Batch production records              NC    76   23 MECMA
    EN 61784-1:2010       Industrial communication networks - Profiles -- Part 1:      NC     272   23 MECMA
359                       Fieldbus profiles
    EN 61784-2:2010       Industrial communication networks - Profiles -- Part 2:      NC     240   23 MECMA
                          Additional fieldbus profiles for real-time networks based on
360                       ISO/IEC 8802-3
      EN 61784-3:2010     Industrial communication networks - Profiles -- Part 3:        NC    64   23 MECMA
                          Functional safety fieldbuses - General rules and profile
361                       definitions
      EN 61784-3-1:2010   Industrial communication networks - Profiles -- Part 3-1:      NC    72   23 MECMA
                          Functional safety fieldbuses - Additional specifications for
362                       CPF 1




                                     Pagina 41 din 346
      EN 61784-3-12:2010          Industrial communication networks - Profiles -- Part 3-12:     NC   101   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
363                               CPF 12
      EN 61784-3-13:2010          Industrial communication networks - Profiles -- Part 3-13:     NC   179   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
364                               CPF 13
      EN 61784-3-14:2010          Industrial communication networks - Profiles -- Part 3-14:     NC    78   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
365                               CPF 14
      EN 61784-3-2:2010           Industrial communication networks - Profiles -- Part 3-2:      NC   265   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
366                               CPF 2
      EN 61784-3-3:2010           Industrial communication networks - Profiles - Part 3-3:       NC   131   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
367                               CPF 3
      EN 61784-3-6:2010           Industrial communication networks - Profiles -- Part 3-6:      NC    90   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
368                               CPF 6
      EN 61784-3-8:2010           Industrial communication networks - Profiles -- Part 3-8:      NC    49   23 MECMA
                                  Functional safety fieldbuses - Additional specifications for
369                               CPF 8
      EN 61804-3:2011             Function Blocks (FB) for process control -- Part 3:            NC   439   23 MECMA
370                               Electronic Device Description Language (EDDL)
      EN 62541-3:2010             OPC unified architecture -- Part 3: Address Space Model        NC   120   23 MECMA
371
      EN 62591:2010               Industrial communication networks - Wireless                   NC   450   23 MECMA
                                  communication network and communication profiles -
372                               WirelessHART™
      EN 62359:2011               Ultrasonics - Field characterization - Test methods for the NC       70   26 MECMA
                                  determination of thermal and mechanical indices related to
373                               medical diagnostic ultrasonic fields
      EN 62489-2:2011             Electroacoustics - Audio-frequency induction loop systems NC         20   26 MECMA
                                  for assisted hearing -- Part 2: Methods of calculating and
                                  measuring the low-frequency magnetic field emissions
                                  from the loop for assessing conformity with guidelines on
                                  limits for human exposure
374
      EN 50132-1:2010             Alarm systems - CCTV surveillance systems for use in           NC    42   27 MECMA
                                  security applications -- Part 1: System requirements
375
      EN 50518-1:2010             Monitoring and alarm receiving centre -- Part 1: Location      NC    19   27 MECMA
376                               and construction requirements
      EN 50518-2:2010             Monitoring and alarm receiving centre -- Part 2: Technical     NC    12   27 MECMA
377                               requirements
378 EN 50518-2:2010/AC:2011                                                                      ER     1   27 MECMA
    EN 50518-3:2011               Monitoring and alarm receiving centre -- Part 3:               NC     9   27 MECMA
379                               Procedures and requirements for operation
    EN 55016-1-1:2010/A1:2010     Specification for radio disturbance and immunity               NC     6   30 MECMA
                                  measuring apparatus and methods -- Part 1-1: Radio
                                  disturbance and immunity measuring apparatus -
380                               Measuring apparatus
      EN 55016-1-4:2010           Specification for radio disturbance and immunity               NC   107   30 MECMA
                                  measuring apparatus and methods -- Part 1-4: Radio
                                  disturbance and immunity measuring apparatus -
                                  Antennas and test sites for radiated disturbance
381                               measurements
      EN 55016-2-1:2009/A1:2011   Specification for radio disturbance and immunity        NC           15   30 MECMA
                                  measuring apparatus and methods -- Part 2-1: Methods of
                                  measurement of disturbances and immunity - Conducted
382                               disturbance measurements
      EN 55016-2-2:2011           Specification for radio disturbance and immunity        NC           50   30 MECMA
                                  measuring apparatus and methods -- Part 2-2: Methods of
                                  measurement of disturbances and immunity -
383                               Measurement of disturbance power
      EN 55016-2-3:2010           Specification for radio disturbance and immunity        NC           97   30 MECMA
                                  measuring apparatus and methods -- Part 2-3: Methods of
                                  measurement of disturbances and immunity - Radiated
384                               disturbance measurements




                                            Pagina 42 din 346
      EN 55016-2-3:2010/A1:2010    Specification for radio disturbance and immunity        NC            10   30 MECMA
                                   measuring apparatus and methods -- Part 2-3: Methods of
                                   measurement of disturbances and immunity - Radiated
385                                disturbance measurements
      EN 61000-4-16:1998/A2:2011   Electromagnetic compatibility (EMC) -- Part 4-16: Testing       NC     7   30 MECMA
                                   and measurement techniques - Test for immunity to
                                   conducted, common mode disturbances in the frequency
386                                range 0 Hz to 150 kHz
      EN 61000-4-18:2007/A1:2010   Electromagnetic compatibility (EMC) -- Part 4-18: Testing       NC     4   30 MECMA
                                   and measurement techniques - Damped oscillatory wave
387                                immunity test
      EN 61000-4-20:2010           Electromagnetic compatibility (EMC) -- Part 4-20: Testing       NC    79   30 MECMA
                                   and measurement techniques - Emission and immunity
                                   testing in transverse electromagnetic (TEM) waveguides
388
      EN 61000-4-21:2011           Electromagnetic compatibility (EMC) -- Part 4-21: Testing       NC   116   30 MECMA
                                   and measurement techniques - Reverberation chamber
389                                test methods
      EN 61000-4-22:2011           Electromagnetic compatibility (EMC) -- Part 4-22: Testing       NC    55   30 MECMA
                                   and measurement techniques - Radiated emission and
                                   immunity measurements in fully anechoic rooms (FARs)
390
      EN 61000-4-3:2006/A2:2010    Electromagnetic compatibility (EMC) -- Part 4-3: Testing NC            8   30 MECMA
                                   and measurement techniques - Radiated, radio-frequency,
391                                electromagnetic field immunity test
      EN 60519-1:2011              Safety in electroheating installations -- Part 1: General       NC    38   31 MECMA
392                                requirements
      EN 60519-6:2011              Safety in electroheat installations -- Part 6: Specifications   NC    32   31 MECMA
                                   for safety in industrial microwave heating equipment
393
      EN 60695-7-1:2010            Fire hazard testing -- Part 7-1: Toxicity of fire effluent -    NC    29   33 MECMA
394                                General guidance
      EN 61788-14:2010             Superconductivity -- Part 14: Superconducting power             NC    29   34 MECMA
                                   devices - General requirements for characteristic tests of
                                   current leads designed for powering superconducting
395                                devices
      EN 61788-8:2010              Superconductivity -- Part 8: AC loss measurements - Total NC          37   34 MECMA
                                   AC loss measurement of round superconducting wires
                                   exposed to a transverse alternating magnetic field at liquid
                                   helium temperature by a pickup coil method
396
      EN 50530:2010                Overall efficiency of grid connected photovoltaic inverters     NC    36   35 MECMA
397
      EN 60904-5:2011              Photovoltaic devices -- Part 5: Determination of the            NC    13   35 MECMA
                                   equivalent cell temperature (ECT) of photovoltaic (PV)
398                                devices by the open-circuit voltage method
      EN 61853-1:2011              Photovoltaic (PV) module performance testing and energy         NC    20   35 MECMA
                                   rating -- Part 1: Irradiance and temperature performance
399                                measurements and power rating
      EN 62109-1:2010              Safety of power converters for use in photovoltaic power     NC      156   35 MECMA
400                                systems -- Part 1: General requirements
      EN 62116:2011                Test procedure of islanding prevention measures for utility- NC       22   35 MECMA
401                                interconnected photovoltaic inverters
      EN 60146-1-1:2010            Semiconductor converters - General requirements and line NC          101   36 MECMA
                                   commutated converters -- Part 1-1: Specification of basic
402                                requirements
      EN 61803:1999/A1:2010        Determination of power losses in high-voltage direct            NC     9   36 MECMA
                                   current (HVDC) converter stations with line-commutated
403                                converters
      EN 61975:2010                High-voltage direct current (HVDC) installations - System       NC    82   36 MECMA
404                                tests
      EN 62040-3:2011              Uninterruptible power systems (UPS) -- Part 3: Method of        NC   112   36 MECMA
                                   specifying the performance and test requirements
405
      EN 60143-4:2010              Series capacitors for power systems -- Part 4: Thyristor        NC    59   37 MECMA
406                                controlled series capacitors
407 EN 60825-4:2006/A2:2011        Safety of laser products -- Part 4: Laser guards                NC     9   38 MECMA
    EN ISO 544:2011                Welding consumables - Technical delivery conditions for         NC    12   39 MECMA
                                   filler materials and fluxes - Type of product, dimensions,
                                   tolerances and markings (ISO 544:2011)
408




                                              Pagina 43 din 346
      EN ISO 3580:2011      Welding consumables - Covered electrodes for manual             NC   25   39 MECMA
                            metal arc welding of creep-resisting steels - Classification
409                         (ISO 3580:2010)
      EN ISO 4136:2011      Destructive tests on welds in metallic materials -              NC   12   39 MECMA
410                         Transverse tensile test (ISO 4136:2001)
      EN ISO 5178:2011      Destructive tests on welds in metallic materials -              NC    9   39 MECMA
                            Longitudinal tensile test on weld metal in fusion welded
411                         joints (ISO 5178:2001)
      EN ISO 7291:2010      Gas welding equipment - Pressure regulators for manifold        NC   22   39 MECMA
                            systems used in welding, cutting and allied processes up
412                         to 30 MPa (300 bar) (ISO 7291:2010)
      EN ISO 9015-1:2011    Destructive tests on welds in metallic materials - Hardness NC       17   39 MECMA
                            testing - Part 1: Hardness test on arc welded joints (ISO
413                         9015-1:2001)
      EN ISO 9015-2:2011    Destructive tests on welds in metallic materials - Hardness NC       12   39 MECMA
                            testing - Part 2: Microhardness testing of welded joints
414                         (ISO 9015-2:2003)
      EN ISO 9016:2011      Destructive tests on welds in metallic materials - Impact       NC   10   39 MECMA
                            tests - Test specimen location, notch orientation and
415                         examination (ISO 9016:2001)
      EN ISO 12690:2010     Metallic and other inorganic coatings - Thermal spray      NC        14   39 MECMA
                            coordination - Tasks and responsibilities (ISO 12690:2010)
416
      EN ISO 14171:2010     Welding consumables - Solid wire electrodes, tubular            NC   23   39 MECMA
                            cored electrodes and electrode/flux combinations for
                            submerged arc welding of non alloy and fine grain steels -
                            Classification (ISO 14171:2010)
417
      EN ISO 14341:2011     Welding consumables - Wire electrodes and weld                  NC   15   39 MECMA
                            deposits for gas shielded metal arc welding of non alloy
                            and fine grain steels - Classification (ISO 14341:2010)
418
      EN ISO 14372          Welding consumables - Determination of moisture                 NC    7   39 MECMA
                            resistance of manual metal arc welding electrodes by
                            measurement of diffusible hydrogen (ISO 14372:2011)
419
      EN ISO 14921:2010     Thermal spraying - Procedures for the application of            NC   15   39 MECMA
                            thermally sprayed coatings for engineering components
420                         (ISO 14921:2010)
      EN ISO 15792-3:2011   Welding consumables - Test methods - Part 3:                    NC    8   39 MECMA
                            Classification testing of positional capacity and root
                            penetration of welding consumables in a fillet weld (ISO
421                         15792-3:2011)
      EN ISO 17637:2011     Non-destructive testing of welds - Visual testing of fusion-    NC   13   39 MECMA
422                         welded joints (ISO 17637:2003)
      EN ISO 18274:2010     Welding consumables - Solid wire electrodes, solid strip        NC   27   39 MECMA
                            electrodes, solid wires and solid rods for fusion welding of
                            nickel and nickel alloys - Classification (ISO 18274:2010)
423
      EN ISO 24034:2010     Welding consumables - Solid wire electrodes, solid wires      NC     14   39 MECMA
                            and rods for fusion welding of titanium and titanium alloys -
424                          Classification (ISO/FDIS 24034:2010)
      EN ISO 7963:2010      Non-destructive testing - Ultrasonic testing - Specification    NC   12   40 MECMA
                            for calibration block No. 2 (ISO 7963:2006)
425
      EN 13477-2:2010       Non-destructive testing - Acoustic emission - Equipment         NC   32   40 MECMA
                            characterisation - Part 2: Verification of operating
426                         characteristic
      EN 13554:2011         Non-destructive testing - Acoustic emission testing -           NC   15   40 MECMA
427                         General principles
      EN 14127:2011         Non-destructive testing - Ultrasonic thickness                  NC   40   40 MECMA
428                         measurement
      EN ISO 15549:2010     Non-destructive testing - Eddy current testing - General        NC   11   40 MECMA
429                         principles (ISO 15549:2008)
      EN ISO 148-1:2010     Metallic materials - Charpy pendulum impact test - Part 1:      NC   29   42 MECMA
430                         Test method (ISO 148-1:2009)
      EN ISO 376:2011       Metallic materials - Calibration of force-proving               NC   33   42 MECMA
                            instruments used for the verification of uniaxial testing
431                         machines (ISO 376:2011)
      EN ISO 6892-2:2011    Metallic materials - Tensile testing - Part 2: Method of test   NC   23   42 MECMA
432                         at elevated temperature (ISO 6892-2:2011)




                                       Pagina 44 din 346
      EN 10051:2010         Continuously hot-rolled strip and plate/sheet cut from wide NC        16   42 MECMA
                            strip of non-alloy and alloy steels - Tolerances on
433                         dimensions and shape
      EN 10169:2010         Continuously organic coated (coil coated) steel flat             NC   35   42 MECMA
434                         products - Technical delivery conditions
      EN ISO 15630-1:2010   Steel for the reinforcement and prestressing of concrete -       NC   23   42 MECMA
                            Test methods - Part 1: Reinforcing bars, wire rod and wire
435                         (ISO 15630-1:2010)
      EN ISO 15630-2:2010   Steel for the reinforcement and prestressing of concrete -       NC   19   42 MECMA
                            Test methods - Part 2: Welded fabric (ISO 15630-2:2010)
436
      EN ISO 15630-3:2010   Steel for the reinforcement and prestressing of concrete -       NC   30   42 MECMA
                            Test methods - Part 3: Prestressing steel (ISO 15630-
437                         3:2010)
      EN 10351:2011         Chemical analysis of ferrous materials - Inductively       NC         44   45 MECMA
                            coupled plasma optical emission spectrometric analysis of
                            unalloyed and low alloyed steels - Determination of Mn, P,
                            Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
438
      EN ISO 11876:2010     Hardmetals - Determination of calcium, copper, iron,             NC    7   46 MECMA
                            potassium, magnesium, manganese, sodium, nickel and
                            zinc in cobalt metal powders - Flame atomic absorption
439                         spectrometric method (ISO 11876:2010)
      EN 545:2010           Ductile iron pipes, fittings, accessories and their joints for   NC   93   47 MECMA
                            water pipelines - Requirements and test methods
440
      EN 1559-1:2011        Founding - Technical conditions of delivery - Part 1:            NC   23   47 MECMA
441                         General
      EN 1560:2011          Founding - Designation system for cast iron - Material           NC   17   47 MECMA
442                         symbols and material numbers
443 EN 12513:2011           Founding - Abrasion resistant cast irons                         NC   20   47 MECMA
    EN ISO 8015:2011        Geometrical product specifications (GPS) - Fundamentals - NC          13   58 MECMA
                            Concepts, principles and rules (ISO 8015:2011)
444
      EN ISO 9493:2010      Geometrical product specifications (GPS) - Dimensional           NC   22   58 MECMA
                            measuring equipment: Dial test indicators (lever type) -
                            Design and metrological characteristics (ISO 9493:2010)
445
      EN ISO 10360-5:2010   Geometrical product specifications (GPS) - Acceptance      NC         33   58 MECMA
                            and reverification tests for coordinate measuring machines
                            (CMM) - Part 5: CMMs using single and multiple stylus
                            contacting probing systems (ISO 10360-5:2010)
446
      EN ISO 10360-7:2011   Geometrical product specifications (GPS) - Acceptance      NC         42   58 MECMA
                            and reverification tests for coordinate measuring machines
                            (CMM) - Part 7: CMMs equipped with imaging probing
447                         systems (ISO 10360-7:2011)
      EN ISO 12180-1:2011   Geometrical product specifications (GPS) - Cylindricity -  NC         19   58 MECMA
                            Part 1: Vocabulary and parameters of cylindrical form (ISO
448                         12180-1:2011)
      EN ISO 12180-2:2011   Geometrical product specifications (GPS) - Cylindricity -        NC   15   58 MECMA
                            Part 2: Specification operators (ISO 12180-2:2011)
449
      EN ISO 12181-1:2011   Geometrical product specifications (GPS) - Roundness -           NC   16   58 MECMA
                            Part 1: Vocabulary and parameters of roundness (ISO
450                         12181-1:2011)
      EN ISO 12181-2:2011   Geometrical product specifications (GPS) - Roundness -           NC   12   58 MECMA
                            Part 2: Specification operators (ISO 12181-2:2011)
451
      EN ISO 12780-1:2011   Geometrical product specifications (GPS) - Straightness -        NC   14   58 MECMA
                            Part 1: Vocabulary and parameters of straightness (ISO
452                         12780-1:2011)
      EN ISO 12780-2:2011   Geometrical product specifications (GPS) - Straightness -        NC   11   58 MECMA
                            Part 2: Specification operators (ISO 12780-2:2011)
453
      EN ISO 12781-1:2011   Geometrical product specifications (GPS) - Flatness - Part NC         14   58 MECMA
                            1: Vocabulary and parameters of flatness (ISO 12781-
454                         1:2011)
      EN ISO 12781-2:2011   Geometrical product specifications (GPS) - Flatness - Part NC         16   58 MECMA
455                         2: Specification operators (ISO 12781-2:2011)




                                       Pagina 45 din 346
      EN ISO 14253-2:2011     Geometrical product specifications (GPS) - Inspection by     NC   74   58 MECMA
                              measurement of workpieces and measuring equipment -
                              Part 2: Guidance for the estimation of uncertainty in GPS
                              measurement, in calibration of measuring equipment and
                              in product verification (ISO 14253-2:2011)
456
      EN ISO 14253-3:2011     Geometrical product specifications (GPS) - Inspection by     NC   15   58 MECMA
                              measurement of workpieces and measuring equipment -
                              Part 3: Guidelines for achieving agreements on
                              measurement uncertainty statements (ISO 14253-3:2011)
457
      EN ISO 14405-1:2010     Geometrical product specifications (GPS) - Dimensional       NC   38   58 MECMA
                              tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
458
      EN ISO 14406:2010       Geometrical product specifications (GPS) - Extraction (ISO NC     19   58 MECMA
459                           14406:2010)
      EN ISO 25378:2011       Geometrical product specifications (GPS) - Characteristics NC     61   58 MECMA
                              and conditions - Definitions (ISO 25378:2011)
460
      EN ISO 225:2010         Fasteners - Bolts, screws, studs and nuts - Symbols and      NC   60   59 MECMA
                              descriptions of dimensions (ISO 225:2010)
461
      EN ISO 2702:2011        Heat-treated steel tapping screws - Mechanical properties    NC    9   59 MECMA
462                           (ISO 2702:2011)
      EN ISO 4014:2011        Hexagon head bolts - Product grades A and B (ISO             NC   17   59 MECMA
463                           4014:2011)
      EN ISO 4016:2011        Hexagon head bolts - Product grade C (ISO 4016:2011)         NC   12   59 MECMA
464
      EN ISO 4017:2011        Hexagon head screws - Product grades A and B (ISO            NC   13   59 MECMA
465                           4017:2011)
      EN ISO 4018:2011        Hexagon head screws - Product grade C (ISO 4018:2011)        NC   12   59 MECMA
466
      EN ISO 7048:2011        Cross-recessed cheese head screws (ISO 7048:2011)            NC    8   59 MECMA
467
      EN ISO 8765:2011        Hexagon head bolts with metric fine pitch thread - Product   NC   14   59 MECMA
468                           grades A and B (ISO 8765:2011)
      EN ISO 10510:2011       Tapping screw and washer assemblies with plain washers       NC    7   59 MECMA
469                           (ISO 10510:2011)
      EN ISO 12474:2010       Hexagon socket head cap screws with metric fine pitch        NC   11   59 MECMA
470                           thread (ISO 12474:2010)
      EN ISO 14579:2011       Hexalobular socket head cap screws (ISO 14579:2011)          NC   10   59 MECMA
471
      EN ISO 14580:2011       Hexalobular socket cheese head screws (ISO 14580:2011) NC          8   59 MECMA
472
      EN ISO 14583:2011       Hexalobular socket pan head screws (ISO 14583:2011)          NC    8   59 MECMA
473
      EN ISO 14584:2011       Hexalobular socket raised countersunk head screws (ISO       NC    8   59 MECMA
474                           14584:2011)
      EN ISO 14585:2011       Hexalobular socket pan head tapping screws (ISO              NC    7   59 MECMA
475                           14585:2011)
      EN ISO 14586:2011       Hexalobular socket countersunk head tapping screws (ISO      NC    7   59 MECMA
476                           14586:2011)
      EN ISO 14587:2011       Hexalobular socket raised countersunk (oval) head            NC    7   59 MECMA
477                           tapping screws (ISO 14587:2011)
      EN 957-6:2010           Stationary training equipment - Part 6: Treadmills,          NC   22   66 MECMA
                              additional specific safety requirements and test methods
478
      EN 1069-1:2010          Water slides - Part 1: Safety requirements and test          NC   52   66 MECMA
479                           methods
480 EN 1069-2:2010            Water slides - Part 2: Instructions                          NC   40   66 MECMA
    EN 15288-1:2008+A1:2010   Swimming pools - Part 1: Safety requirements for design      NC   22   66 MECMA
481
    EN 15312:2007+A1:2010     Free access multi-sports equipment - Requirements,           NC   53   66 MECMA
482                           including safety and test methods
483 EN 12413:2007+A1:2011     Safety requirements for bonded abrasive products             NC   51   79 MECMA
484 EN 13236:2010             Safety requirements for superabrasive products               NC   47   79 MECMA
485 EN 131-1:2007+A1:2011     Ladders - Part 1: Terms, types, functional sizes             NC   25   88 MECMA
      EN ISO 13365:2011       Leather - Chemical tests - Determination of the              NC    8 102 MECMA
                              preservative (TCMTB, PCMC, OPP, OIT) content in
486                           leather by liquid chromatography (ISO 13365:2011)




                                        Pagina 46 din 346
      EN 15987:2011             Leather - Terminology - Key definitions for the leather trade NC    9 102 MECMA
487
      EN ISO 17072-1:2011       Leather - Chemical determination of metal content - Part       NC   11 102 MECMA
488                             1: Extractable metals (ISO 17072-1:2011)
      EN ISO 17072-2:2011       Leather - Chemical determination of metal content - Part       NC   10 102 MECMA
489                             2: Total metal content (ISO 17072-2:2011)
      EN ISO 17076-2:2011       Leather - Determination of abrasion resistance - Part 2:       NC   10 102 MECMA
490                             Martindale ball plate method (ISO 17076-2:2011)
      EN ISO 17226-3:2011       Leather - Chemical determination of formaldehyde content       NC   9 102 MECMA
                                - Part 3: Determination of formaldehyde emissions from
491                             leather (ISO 17226-3:2011)
      EN ISO 17234-2:2011       Leather - Chemical tests for the determination of certain    NC     19 102 MECMA
                                azo colorants in dyed leathers - Part 2: Determination of 4-
                                aminoazobenzene (ISO 17234-2:2011)
492
      EN ISO 105-E05:2010       Textiles - Tests for colour fastness - Part E05: Colour        NC   6 103 MECMA
493                             fastness to spotting: Acid (ISO 105-E05:2010)
      EN ISO 139:2005/A1:2011   Textiles - Standard atmospheres for conditioning and           NC   5 103 MECMA
                                testing - Amendment 1 (ISO 139:2005/AMD 1:2011)
494
      EN ISO 1833-10:2010       Textiles - Quantitative chemical analysis - Part 10:           NC   5 103 MECMA
                                Mixtures of triacetate or polylactide and certain other fibres
                                (method using dichloromethane) (ISO 1833-10:2006)
495
      EN ISO 1833-12:2010       Textiles - Quantitative chemical analysis - Part 12:           NC   6 103 MECMA
                                Mixtures of acrylic, certain modacrylics, certain
                                chlorofibres, certain elastanes and certain other fibres
                                (method using dimethylformamide) (ISO 1833-12:2006)
496
      EN ISO 1833-13:2010       Textiles - Quantitative chemical analysis - Part 13:           NC   6 103 MECMA
                                Mixtures of certain chlorofibres and certain other fibres
                                (method using carbon disulfide/acetone) (ISO 1833-
497                             13:2006)
      EN ISO 1833-14:2010       Textiles - Quantitative chemical analysis - Part 14:       NC       5 103 MECMA
                                Mixtures of acetate and certain chlorofibres (method using
498                             acetic acid) (ISO 1833-14:2006)
      EN ISO 1833-15:2010       Textiles - Quantitative chemical analysis - Part 15:           NC   7 103 MECMA
                                Mixtures of jute and certain animal fibres (method by
499                             determining nitrogen content) (ISO 1833-15:2006)
      EN ISO 1833-16:2010       Textiles - Quantitative chemical analysis - Part 16:           NC   5 103 MECMA
                                Mixtures of polypropylene fibres and certain other fibres
500                             (method using xylene) (ISO 1833-16:2006)
      EN ISO 1833-17:2010       Textiles - Quantitative chemical analysis - Part 17:           NC   6 103 MECMA
                                Mixtures of chlorofibres (homopolymers of vinyl chloride)
                                and certain other fibres (method using sulfuric acid) (ISO
501                             1833-17:2006)
      EN ISO 1833-19:2010       Textiles - Quantitative chemical analysis - Part 19:           NC   5 103 MECMA
                                Mixtures of cellulose fibres and asbestos (method by
502                             heating) (ISO 1833-19:2006)
      EN ISO 1833-20:2010       Textiles - Quantitative chemical analysis - Part 20:           NC   6 103 MECMA
                                Mixtures of elastane and certain other fibres (method
                                using dimethylacetamide) (ISO 1833-20:2009)
503
      EN ISO 1833-21:2010       Textiles - Quantitative chemical analysis - Part 21:           NC   8 103 MECMA
                                Mixtures of chlorofibres, certain modacrylics, certain
                                elastanes, acetates, triacetates and certain other fibres
                                (method using cyclohexanone) (ISO 1833-21:2006)
504
      EN ISO 1833-24:2011       Textiles - Quantitative chemical analysis - Part 24:           NC   6 103 MECMA
                                Mixtures of polyester and certain other fibres (method
                                using phenol and tetrachloroethane) (ISO 1833-24:2010)
505
      EN ISO 1833-4:2010        Textiles - Quantitative chemical analysis - Part 4: Mixtures   NC   5 103 MECMA
                                of certain protein and certain other fibres (method using
506                             hypochlorite) (ISO 1833-4:2006)
      EN ISO 1833-7:2010        Textiles - Quantitative chemical analysis - Part 7: Mixtures NC     6 103 MECMA
                                of polyamide and certain other fibres (method using formic
507                             acid) (ISO 1833-7:2006)
      EN ISO 1833-8:2010        Textiles - Quantitative chemical analysis - Part 8: Mixtures   NC   5 103 MECMA
                                of acetate and triacetate fibres (method using acetone)
508                             (ISO 1833-8:2006)




                                          Pagina 47 din 346
      EN ISO 1833-9:2010           Textiles - Quantitative chemical analysis - Part 9: Mixtures   NC   5 103 MECMA
                                   of acetate and triacetate fibres (method using benzyl
509                                alcohol) (ISO 1833-9:2006)
      EN ISO 2307:2010             Fibre ropes - Determination of certain physical and            NC   19 103 MECMA
510                                mechanical properties (ISO 2307:2010)
      EN ISO 3759:2011             Textiles - Preparation, marking and measuring of fabric        NC   9 103 MECMA
                                   specimens and garments in tests for determination of
                                   dimensional change (ISO 3759:2011)
511
512 EN ISO 9554:2010               Fibre ropes - General specifications (ISO 9554:2010)           NC   25 103 MECMA
    EN 13772:2011                  Textiles and textile products - Burning behaviour -            NC   13 103 MECMA
                                   Curtains and drapes - Measurement of flame spread of
                                   vertically oriented specimens with large ignition source
513
514 EN 15930:2010                  Fibres - Elasticity of fibres - Test methods                   NC   15 103 MECMA
    EN 15973:2011                  Rubber- or plastic-coated fabrics - Upholstery fabrics -       NC   11 103 MECMA
515                                Resistance to soiling
    EN 15977:2011                  Rubber or plastic coated fabrics - Mechanical properties -     NC   7 103 MECMA
                                   Determination of the elongation under load and the
516                                residual deformation
      EN ISO 32100:2010            Rubber- or plastics-coated fabrics - Physical and              NC   16 103 MECMA
                                   mechanical tests - Determination of flex resistance by the
517                                flexometer method (ISO 32100:2010)
      EN 15919:2011                Fertilizers - Extraction of phosphorus soluble in 2 % formic   NC   6 105 MECMA
518                                acid
      EN 15920:2011                Fertilizers - Extraction of phosphorus soluble in 2 % citric   NC   6 105 MECMA
519                                acid
      EN 15921:2011                Fertilizers - Extraction of soluble phosphorus according to    NC   7 105 MECMA
520                                Petermann at 65 °C
      EN 15922:2011                Fertilizers - Extraction of soluble phosphorus according to    NC   7 105 MECMA
521                                Petermann at ambient temperature
      EN 15923:2011                Fertilizers - Extraction of phosphorus soluble in Joulie's     NC   7 105 MECMA
522                                alcaline ammonium citrate
      EN 15928:2010                Fertilizers - Determination of the fineness of grinding (dry   NC   6 105 MECMA
523                                procedure)
      EN 15950:2010                Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-     NC   15 105 MECMA
                                   aspartic acid (Iminodisuccinic acid, IDHA) using high-
524                                performance liquid chromatography (HPLC)
      EN 15962:2011                Fertilizers - Determination of the complexed micro-nutrient NC      13 105 MECMA
                                   content and of the complexed fraction of micro-nutrients
525
      EN 16024:2011                Fertilizers - Determination of 1H-1,2,4-triazole in urea and   NC   11 105 MECMA
                                   in fertilizers containing urea - Method using high-
526                                performance liquid chromatography (HPLC)
      EN ISO 175:2010              Plastics - Methods of test for the determination of the        NC   23 108 MECMA
                                   effects of immersion in liquid chemicals (ISO 175:2010)
527
      EN ISO 877-1:2010            Plastics - Methods of exposure to solar radiation - Part 1: NC      16 108 MECMA
528                                General guidance (ISO 877-1:2009)
      EN ISO 877-2:2010            Plastics - Methods of exposure to solar radiation - Part 2: NC      9 108 MECMA
                                   Direct weathering and exposure behind window glass (ISO
529                                877-2:2009)
      EN ISO 877-3:2010            Plastics - Methods of exposure to solar radiation - Part 3:    NC   14 108 MECMA
                                   Intensified weathering using concentrated solar radiation
530                                (ISO 877-3:2009)
      EN ISO 1874-1:2010           Plastics - Polyamide (PA) moulding and extrusion               NC   18 108 MECMA
                                   materials - Part 1: Designation system and basis for
531                                specification (ISO 1874-1:2010)
      EN ISO 1874-2:2006/A1:2010   Plastics - Polyamide (PA) moulding and extrusion               NC   5 108 MECMA
                                   materials - Part 2: Preparation of test specimens and
                                   determination of properties - Amendment 1: Laser
                                   sintering of specimens (ISO 1874-2:2006/Amd 1:2010)
532
      EN ISO 4611:2010             Plastics - Determination of the effects of exposure to damp NC      15 108 MECMA
                                   heat, water spray and salt mist (ISO 4611:2010)
533
      EN ISO 6721-1:2011           Plastics - Determination of dynamic mechanical properties NC        23 108 MECMA
                                   - Part 1: General principles (ISO 6721-1:2011)
534




                                              Pagina 48 din 346
      EN ISO 10350-2:2011       Plastics - Acquisition and presentation of comparable          NC   12 108 MECMA
                                single-point data - Part 2: Long-fibre-reinforced plastics
535                             (ISO 10350-2:2011)
      EN ISO 11337:2010         Plastics - Polyamides - Determination of e-caprolactam         NC   17 108 MECMA
                                and w-laurolactam by gas chromatography (ISO
536                             11337:2010)
      EN 13245-1:2010           Plastics - Unplasticized poly(vinyl chloride) (PVC-U)          NC   23 108 MECMA
                                profiles for building applications - Part 1: Designation of
537                             PVC-U profiles
      EN ISO 15015:2011         Plastics - Extruded sheets of impact-modified acrylonitrile- NC     14 108 MECMA
                                styrene copolymers (ABS, AEPDS and ASA) -
                                Requirements and test methods (ISO 15015:2011)
538
      EN 12405-1:2005+A2:2010   Gas meters - Conversion devices - Part 1: Volume               NC   111 109 MECMA
539                             conversion
540 EN 14154-1:2005+A2:2011     Water meters - Part 1: General requirements                    NC   63 109 MECMA
    EN 14154-2:2005+A2:2011     Water meters - Part 2: Installation and conditions of use      NC   40 109 MECMA
541
542 EN 14154-3:2005+A2:2011     Water meters - Part 3: Test methods and equipment              NC   86 109 MECMA
543 EN 312:2010                 Particleboards - Specifications                                NC   18 118 MECMA
    EN 320:2011                 Particleboards and fibreboards - Determination of              NC    9 118 MECMA
544                             resistance to axial withdrawal of screws
    EN 326-2:2010               Wood-based panels - Sampling, cutting and inspection -         NC   41 118 MECMA
                                Part 2: Initial type testing and factory production control
545
      EN 527-1:2011             Office furniture - Work tables and desks - Part 1:             NC   22 118 MECMA
546                             Dimensions
      EN 1533:2010              Wood flooring - Determination of bending strength under        NC   16 118 MECMA
547                             static load - Test methods
      EN 1534:2010              Wood flooring - Determination of resistance to indentation -   NC   10 118 MECMA
548                              Test method
      EN 12227:2010             Playpens for domestic use - Safety requirements and test       NC   47 118 MECMA
549                             methods
      EN 12369-2:2011           Wood-based panels - Characteristic values for structural       NC   17 118 MECMA
550                             design - Part 2: Plywood
      EN 13228:2011             Wood flooring - Solid wood overlay flooring elements           NC   28 118 MECMA
551                             including blocks with an interlocking system
552 EN 13353:2008+A1:2011       Solid wood panels (SWP) - Requirements                         NC   13 118 MECMA
    EN 13647:2011               Wood flooring and wood panelling and cladding -                NC   21 118 MECMA
553                             Determination of geometrical characteristics
    EN 15185:2011               Furniture - Assessment of the surface resistance to            NC   16 118 MECMA
554                             abrasion
    EN 15828:2010               Hardware for furniture - Strength and durability of hinges     NC   24 118 MECMA
                                and their components - Stays and hinges pivoting on a
555                             horizontal axis
      EN ISO 4787:2011          Laboratory glassware - Volumetric instruments - Methods        NC   29 119 MECMA
                                for testing of capacity and for use (ISO 4787:2010,
556                             Corrected version 2010-06-15)
      EN 71-1:2011              Safety of toys - Part 1: Mechanical and physical properties NC      128 125 MECMA
557
      EN 12586:2007+A1:2011     Child use and care articles - Soother holder - Safety          NC   53 125 MECMA
558                             requirements and test methods
      EN 60255-22-5:2011        Measuring relays and protection equipment -- Part 22-5:        NC   23 128 MECMA
                                Electrical disturbance tests - Surge immunity test
559
      EN 61810-2:2011           Electromechanical elementary relays -- Part 2: Reliability     NC   37 128 MECMA
560
      EN 61810-2-1:2011         Electromechanical elementary relays -- Part 2-1: Reliability NC     20 128 MECMA
                                - Procedure for the verification of B10 values
561
562 EN 62246-1:2011             Reed switches -- Part 1: Generic specification                 NC   83 128 MECMA
    EN 60974-6:2011             Arc welding equipment -- Part 6: Limited duty equipment        NC   40 129 MECMA
563
    EN 60974-4:2011             Arc welding equipment -- Part 4: Periodic inspection and       NC   19 129 MECMA
564                             testing
565 EN 60238:2004/A2:2011       Edison screw lampholders                                       NC    9 131 MECMA
      EN 60357:2003/A3:2011     Tungsten halogen lamps (non-vehicle) - Performance             NC    7 131 MECMA
566                             specifications
      EN 60838-1:2004/A2:2011   Miscellaneous lampholders -- Part 1: General                   NC   10 131 MECMA
567                             requirements and tests
568 EN 61167:2011               Metal halide lamps - Performance specification                 NC   162 131 MECMA



                                           Pagina 49 din 346
569 EN 61231:2010                  International lamp coding system (ILCOS)                     NC   27 131 MECMA
    EN 61347-1:2008/A1:2011        Lamp controlgear -- Part 1: General and safety               NC   10 131 MECMA
570                                requirements
571 EN 62532:2011                  Fluorescent induction lamps - Safety specifications          NC   28 131 MECMA
      EN 62006:2011                Hydraulic machines - Acceptance tests of small               NC   116 133 MECMA
572                                hydroelectric installations
      EN 60384-26:2010             Fixed capacitors for use in electronic equipment -- Part 26: NC   34 135 MECMA
                                   Sectional specification - Fixed aluminium electrolytic
                                   capacitors with conductive polymer solid electrolyte
573
      EN 60384-26-1:2010           Fixed capacitors for use in electronic equipment -- Part 26- NC   20 135 MECMA
                                   1: Blank detail specification - Fixed aluminum electrolytic
                                   capacitors with conductive polymer solid electrolyte -
574                                Assessment level EZ
      EN 60539-2:2004/A1:2010      Directly heated negative temperature coefficient             NC    6 135 MECMA
                                   thermistors -- Part 2: Sectional specification - Surface
                                   mount negative temperature coefficient thermistors
575
      EN 60939-1:2010              Passive filter units for electromagnetic interference        NC   38 135 MECMA
576                                suppression -- Part 1: Generic specification
      EN 62490-1:2010              ESL measuring method -- Part 1: Capacitors with lead         NC   14 135 MECMA
577                                terminal for use in electronic equipment
      EN 62490-2:2010              ESL measuring method -- Part 2: Surface mount                NC   18 135 MECMA
578                                capacitors for use in electronic equipment
      EN 140401-802:2007/A1:2010   Detail specification: Fixed low power film SMD resistors -   NC    3 135 MECMA
579                                Rectangular - Stability classes 1; 2
      EN 140401-803:2007/A1:2010   Detail specification: Fixed low power film SMD resistors -   NC    4 135 MECMA
                                   Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
580
      EN 61850-7-2:2010            Communication networks and systems for power utility     NC       218 140 MECMA
                                   automation -- Part 7-2: Basic information and
                                   communication structure - Abstract communication service
581                                interface (ACSI)
      EN 61850-7-3:2011            Communication networks and systems for power utility         NC   94 140 MECMA
                                   automation -- Part 7-3: Basic communication structure -
582                                Common data classes
      EN 61850-7-4:2010            Communication networks and systems for power utility         NC   184 140 MECMA
                                   automation -- Part 7-4: Basic communication structure -
                                   Compatible logical node classes and data object classes
583
      EN 61968-11:2010             Application integration at electric utilities - System       NC   165 140 MECMA
                                   interfaces for distribution management -- Part 11:
                                   Common information model (CIM) extensions for
584                                distribution
585 EN 13306:2010                  Maintenance - Maintenance terminology                        NC   31 144 MECMA
    EN 60300-3-12:2011             Dependability management -- Part 3-12: Application guide - NC     56 144 MECMA
586                                 Integrated logistic support
    EN 62502:2010                  Analysis techniques for dependability - Event tree analysis NC    47 144 MECMA
587                                (ETA)
588 EN 62508:2010                  Guidance on human aspects of dependability                  NC    57 144 MECMA
      EN 60130-9:2011              Connectors for frequencies below 3 MHz -- Part 9: Circular NC     58 145 MECMA
                                   connectors for radio and associated sound equipment
589
      EN 60352-8:2011              Solderless connections -- Part 8: Compression mount          NC   24 145 MECMA
                                   connections - General requirements, test methods and
590                                practical guidance
      EN 60512-17-1:2010           Connectors for electronic equipment - Tests and              NC    8 145 MECMA
                                   measurements -- Part 17-1: Cable clamping tests - Test
591                                17a: Cable clamp robustness
      EN 60512-17-3:2010           Connectors for electronic equipment - Tests and              NC    8 145 MECMA
                                   measurements -- Part 17-3: Cable clamping tests - Test
                                   17c: Cable clamp resistance to cable pull (tensile)
592
      EN 60512-17-4:2010           Connectors for electronic equipment - Tests and              NC    8 145 MECMA
                                   measurements -- Part 17-4: Cable clamping tests - Test
593                                17d: Cable clamp resistance to cable torsion
      EN 60512-19-1:2010           Connectors for electronic equipment - Tests and              NC    7 145 MECMA
                                   measurements -- Part 19-1: Chemical resistance tests -
                                   Test 19a: Fluid resistance of pre-insulated crimp barrels
594




                                              Pagina 50 din 346
      EN 60512-20-1:2010             Connectors for electronic equipment - Tests and                 NC   9 145 MECMA
                                     measurements -- Part 20-1: Fire hazard tests - Test 20a:
595                                  Flammability, needle-flame
      EN 60512-20-3:2010             Connectors for electronic equipment - Tests and                 NC   9 145 MECMA
                                     measurements -- Part 20-3: Fire hazard tests - Test 20c:
596                                  Flammability, glow-wire
      EN 60512-21-1:2010             Connectors for electronic equipment - Tests and                 NC   6 145 MECMA
                                     measurements -- Part 21-1: R.F. resistance tests - Test
597                                  21a: R.F. shunt resistance
      EN 60512-22-1:2010             Connectors for electronic equipment - Tests and                 NC   7 145 MECMA
                                     measurements -- Part 22-1: Capacitance tests - Test 22a:
598                                  Capacitance
      EN 60512-23-2:2010             Connectors for electronic equipment - Tests and                 NC   8 145 MECMA
                                     measurements -- Part 23-2: Screening and filtering tests -
                                     Test 23b: Suppression characteristics of integral filters
599
      EN 60512-26-100:2008/A1:2011   Connectors for electronic equipment - Tests and                 NC   6 145 MECMA
                                     measurements -- Part 26-100: Measurement setup, test
                                     and reference arrangements and measurements for
                                     connectors according to IEC 60603-7 - Tests 26a to 26g
600
      EN 60512-8-1:2010              Connectors for electronic equipment - Tests and                 NC   8 145 MECMA
                                     measurements -- Part 8-1: Static load tests (fixed
601                                  connectors) - Test 8a: Static load, transverse
      EN 60603-7-2:2010              Connectors for electronic equipment -- Part 7-2: Detail         NC   18 145 MECMA
                                     specification for 8-way, unshielded, free and fixed
                                     connectors, for data transmissions with frequencies up to
602                                  100 MHz
      EN 60603-7-3:2010              Connectors for electronic equipment -- Part 7-3: Detail         NC   16 145 MECMA
                                     specification for 8-way, shielded, free and fixed
                                     connectors, for data transmission with frequencies up to
603                                  100 MHz
      EN 60603-7-4:2010              Connectors for electronic equipment -- Part 7-4: Detail         NC   18 145 MECMA
                                     specification for 8-way, unshielded, free and fixed
                                     connectors, for data transmissions with frequencies up to
604                                  250 MHz
      EN 60603-7-5:2010              Connectors for electronic equipment -- Part 7-5: Detail         NC   16 145 MECMA
                                     specification for 8-way, shielded, free and fixed
                                     connectors, for data transmissions with frequencies up to
605                                  250 MHz
      EN 60603-7-7:2010              Connectors for electronic equipment -- Part 7-7: Detail      NC      31 145 MECMA
                                     specification for 8-way, shielded, free and fixed connectors
                                     for data transmission with frequencies up to 600 MHz
606
      EN 60603-7-71:2010             Connectors for electronic equipment -- Part 7-71: Detail        NC   20 145 MECMA
                                     specification for 8-way, shielded, free and fixed
                                     connectors, for data transmission with frequencies up to 1
607                                  000 MHz
      EN 61076-2-107:2010            Connectors for electronic equipment - Product                   NC   38 145 MECMA
                                     requirements -- Part 2-107: Detail specification for circular
                                     hybrid connectors M12 with electrical and fibre-optic
608                                  contacts with screw locking
      EN 61076-3-115:2010            Connectors for electronic equipment - Product                   NC   29 145 MECMA
                                     requirements -- Part 3-115: Rectangular connectors -
                                     Detail specification for protective housings for use with 8-
                                     way shielded and unshielded connectors for frequencies
                                     up to 600 MHz for industrial environments incorporating
                                     the IEC 60603-7 series interface - Variant 12 related to
                                     IEC 61076-3-106 - Push-pull type
609
      EN 61076-3-118:2010            Connectors for electronic equipment - Product               NC       33 145 MECMA
                                     requirements -- Part 3-118: Rectangular connectors -
                                     Detail specification for a 4 pole + PE power connector with
610                                  push-pull coupling
      EN 61169-14:2010               Radio-frequency connectors -- Part 14: R.F. coaxial             NC   32 145 MECMA
                                     connectors with inner diameter of outer conductor 12 mm
                                     with screw coupling - Characteristic impedance 75 ohms
611                                  (Type 3,5/12)
      EN 61169-18:2011               Radio-frequency connectors -- Part 18: Sectional                NC   28 145 MECMA
                                     specification - Radio frequency coaxial connectors of type
612                                  SSMA




                                               Pagina 51 din 346
      EN 61169-19:2011          Radio-frequency connectors -- Part 19: Sectional             NC   29 145 MECMA
                                specification - Radio frequency coaxial connectors of type
613                             SSMB
      EN 61169-39:2011          Radio-frequency connectors -- Part 39: Sectional             NC   30 145 MECMA
                                specification for CQM series quick lock RF connectors
614
      EN 61169-40:2011          Radio-frequency connectors -- Part 40: Sectional             NC   28 145 MECMA
615                             specification for 2.4 series RF connectors
      EN 61169-41:2011          Radio-frequency connectors -- Part 41: Sectional             NC   35 145 MECMA
                                specification for CQA series quick lock R.F. coaxial
616                             connectors
      EN 62562:2011             Cavity resonator method to measure the complex               NC   21 145 MECMA
617                             permittivity of low-loss dielectric plates
      EN 378-1:2008+A1:2010     Refrigerating systems and heat pumps - Safety and            NC   65 147 MECMA
                                environmental requirements - Part 1: Basic requirements,
                                definitions, classification and selection criteria
618
      EN 13313:2010             Refrigerating systems and heat pumps - Competence of         NC   25 147 MECMA
619                             personnel
      EN 14276-1:2006+A1:2011   Pressure equipment for refrigerating systems and heat        NC   86 147 MECMA
620                             pumps - Part 1: Vessels - General requirements
      EN 14276-2:2007+A1:2011   Pressure equipment for refrigerating systems and heat        NC   29 147 MECMA
621                             pumps - Part 2: Piping - General requirements
      EN 15879-1:2011           Testing and rating of direct exchange ground coupled heat    NC   23 147 MECMA
                                pumps with electrically driven compressors for space
                                heating and/or cooling - Part 1: Direct exchange-to-water
622                             heat pumps
      EN 16084:2011             Refrigerating systems and heat pumps - Qualification of      NC   39 147 MECMA
623                             tightness of components and joints
      EN 16147:2011             Heat pumps with electrically driven compressors - Testing    NC   35 147 MECMA
                                and requirements for marking of domestic hot water units
624
      EN 15776:2011             Unfired pressure vessels - Requirements for the design       NC   39 152 MECMA
                                and fabrication of pressure vessels and pressure parts
                                constructed from cast iron with an elongation after fracture
625                             equal or less than 15 %
      EN ISO 3613:2010          Metallic and other inorganic coatings - Chromate             NC   12 157 MECMA
                                conversion coatings on zinc, cadmium, aluminium-zinc
                                alloys and zinc-aluminium alloys - Test methods (ISO
626                             3613:2010)
      EN ISO 4534:2010          Vitreous and porcelain enamels - Determination of fluidity   NC   9 157 MECMA
627                             behaviour - Fusion flow test (ISO 4534:2010)
      EN ISO 8565:2011          Metals and alloys - Atmospheric corrosion testing -          NC   14 157 MECMA
628                             General requirements (ISO 8565:2011)
      EN ISO 26945:2011         Metallic and other inorganic coatings - Electrodeposited     NC   13 157 MECMA
                                coatings of tin-cobalt alloy (ISO 26945:2011)
629
      EN ISO 28706-1:2011       Vitreous and porcelain enamels - Determination of           NC    9 157 MECMA
                                resistance to chemical corrosion - Part 1: Determination of
                                resistance to chemical corrosion by acids at room
630                             temperature (ISO 28706-1:2008)
      EN ISO 28706-2:2011       Vitreous and porcelain enamels - Determination of           NC    18 157 MECMA
                                resistance to chemical corrosion - Part 2: Determination of
                                resistance to chemical corrosion by boiling acids, boiling
                                neutral liquids and/or their vapours (ISO 28706-2:2008)
631
      EN ISO 28706-3:2011       Vitreous and porcelain enamels - Determination of            NC   13 157 MECMA
                                resistance to chemical corrosion - Part 3: Determination of
                                resistance to chemical corrosion by alkaline liquids using a
                                hexagonal vessel (ISO 28706-3:2008)
632
      EN ISO 28706-4:2011       Vitreous and porcelain enamels - Determination of            NC   14 157 MECMA
                                resistance to chemical corrosion - Part 4: Determination of
                                resistance to chemical corrosion by alkaline liquids using a
                                cylindrical vessel (ISO 28706-4:2008)
633
      EN ISO 28721-1:2011       Vitreous and porcelain enamels - Glass-lined apparatus       NC   22 157 MECMA
                                for process plants - Part 1: Quality requirements for
                                apparatus, components, appliances and accessories (ISO
634                             28721-1:2008)




                                          Pagina 52 din 346
      EN ISO 28721-2:2011   Vitreous and porcelain enamels - Glass-lined apparatus        NC   6 157 MECMA
                            for process plants - Part 2: Designation and specification
                            of resistance to chemical attack and thermal shock (ISO
635                         28721-2:2008)
      EN ISO 28721-3:2011   Vitreous and porcelain enamels - Glass-lined apparatus     NC      11 157 MECMA
                            for process plants - Part 3: Thermal shock resistance (ISO
636                         28721-3:2008)
      EN ISO 28722:2011     Vitreous and porcelain enamels - Characteristics of           NC   8 157 MECMA
                            enamel coatings applied to steel panels intended for
637                         architecture (ISO 28722:2008)
      EN ISO 28723:2011     Vitreous and porcelain enamels - Determination of the         NC   8 157 MECMA
                            edge covering on enamelled steel plate to be used in heat
638                         exchangers (ISO 28723:2008)
      EN ISO 28763:2011     Vitreous and porcelain enamels - Regenerative,                NC   13 157 MECMA
                            enamelled and packed panels for air-gas and gas-gas
                            heat exchangers - Specifications (ISO 28763:2008)
639
      EN ISO 28764:2011     Vitreous and porcelain enamels - Production of specimens NC        8 157 MECMA
                            for testing enamels on sheet steel, sheet aluminium and
640                         cast iron (ISO 28764:2008)
      EN ISO 28765:2011     Vitreous and porcelain enamels - Design of bolted steel       NC   29 157 MECMA
                            tanks for the storage or treatment of water or municipal or
                            industrial effluents and sludges (ISO 28765:2008)
641
      EN 50525-1:2011       Electric cables - Low voltage energy cables of rated          NC   30 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 1:
642                         General requirements
      EN 50525-2-11:2011    Electric cables - Low voltage energy cables of rated          NC   31 159 MECMA
                            voltages up to and including 450/750 V (Uo/U) -- Part 2-
                            11: Cables for general applications - Flexible cables with
643                         thermoplastic PVC insulation
      EN 50525-2-12:2011    Electric cables - Low voltage energy cables of rated          NC   14 159 MECMA
                            voltages up to and including 450/750 V (Uo/U) -- Part 2-
                            12: Cables for general applications - Cables with
                            thermoplastic PVC insulation for extensible leads
644
      EN 50525-2-21:2011    Electric cables - Low voltage energy cables of rated          NC   39 159 MECMA
                            voltages up to and including 450/750 V (Uo/U) -- Part 2-
                            21: Cables for general applications - Flexible cables with
645                         crosslinked elastomeric insulation
      EN 50525-2-22:2011    Electric cables - Low voltage energy cables of rated          NC   9 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            22: Cables for general applications - High flexibility
                            braided cables with crosslinked elastomeric insulation
646
      EN 50525-2-31:2011    Electric cables - Low voltage energy cables of rated          NC   13 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            31: Cables for general applications - Single core non-
                            sheathed cables with thermoplastic PVC insulation
647
      EN 50525-2-41:2011    Electric cables - Low voltage energy cables of rated          NC   11 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            41: Cables for general applications - Single core cables
                            with crosslinked silicone rubber insulation
648
      EN 50525-2-42:2011    Electric cables - Low voltage energy cables of rated          NC   9 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            42: Cables for general applications - Single core non-
                            sheathed cables with crosslinked EVA insulation
649
      EN 50525-2-51:2011    Electric cables - Low voltage energy cables of rated          NC   15 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            51: Cables for general applications - Oil resistant control
                            cables with thermoplastic PVC insulation
650
      EN 50525-2-71:2011    Electric cables - Low voltage energy cables of rated          NC   8 159 MECMA
                            voltages up to and including 450/750 V (U0/U) -- Part 2-
                            71: Cables for general applications - Flat tinsel cables
                            (cords) with thermoplastic PVC insulation
651




                                      Pagina 53 din 346
      EN 50525-2-72:2011        Electric cables - Low voltage energy cables of rated           NC   8 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 2-
                                72: Cables for general applications - Flat divisible cables
                                (cords) with thermoplastic PVC insulation
652
      EN 50525-2-81:2011        Electric cables - Low voltage energy cables of rated           NC   10 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 2-
                                81: Cables for general applications - Cables with
                                crosslinked elastomeric covering for arc welding
653
      EN 50525-2-82:2011        Electric cables - Low voltage energy cables of rated           NC   9 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 2-
                                82: Cables for general applications - Cables with
                                crosslinked elastomeric insulation for decorative chains
654
      EN 50525-2-83:2011        Electric cables - Low voltage energy cables of rated           NC   11 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 2-
                                83: Cables for general applications - Multicore cables with
655                             crosslinked silicone rubber insulation
      EN 50525-3-11:2011        Electric cables - Low voltage energy cables of rated           NC   12 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 3-
                                11: Cables with special fire performance - Flexible cables
                                with halogen-free thermoplastic insulation, and low
656                             emission of smoke
      EN 50525-3-21:2011        Electric cables - Low voltage energy cables of rated       NC       13 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 3-
                                21: Cables with special fire performance - Flexible cables
                                with halogen-free crosslinked insulation, and low emission
657                             of smoke
      EN 50525-3-31:2011        Electric cables - Low voltage energy cables of rated        NC      12 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 3-
                                31: Cables with special fire performance - Single core non-
                                sheathed cables with halogen-free thermoplastic
658                             insulation, and low emission of smoke
      EN 50525-3-41:2011        Electric cables - Low voltage energy cables of rated        NC      10 159 MECMA
                                voltages up to and including 450/750 V (U0/U) -- Part 3-
                                41: Cables with special fire performance - Single core non-
                                sheathed cables with halogen-free crosslinked insulation,
659                             and low emission of smoke
      EN 50289-4-17:2011        Communication cables - Specifications for test methods --      NC   16 160 MECMA
                                Part 4-17: Test methods for UV resistance evaluation of
                                the sheath of electrical and optical fibre cable
660
      EN 61935-2:2010           Specification for the testing of balanced and coaxial          NC   32 160 MECMA
                                information technology cabling -- Part 2: Cords as
661                             specified in ISO/IEC 11801 and related standards
      EN 50272-1:2010           Safety requirements for secondary batteries and battery        NC   16 161 MECMA
                                installations -- Part 1: General safety information
662
      EN 50342-5:2010           Lead-acid starter batteries -- Part 5: Properties of battery   NC   19 161 MECMA
663                             housings and handles
664 EN 60086-1:2011             Primary batteries -- Part 1: General                           NC   51 161 MECMA
    EN 60086-2:2011             Primary batteries -- Part 2: Physical and electrical           NC   62 161 MECMA
665                             specifications
666 EN 60086-3:2011             Primary batteries -- Part 3: Watch batteries                   NC   29 161 MECMA
      EN 60086-5:2011           Primary batteries -- Part 5: Safety of batteries with          NC   40 161 MECMA
667                             aqueous electrolyte
      EN 60664-3:2003/A1:2010   Insulation coordination for equipment within low-voltage       NC   10 162 MECMA
                                systems -- Part 3: Use of coating, potting or moulding for
668                             protection against pollution
      EN 62058-11:2010          Electricity metering equipment (a.c.) - Acceptance             NC   93 164 MECMA
                                inspection -- Part 11: General acceptance inspection
669                             methods
      EN 62058-21:2010          Electricity metering equipment (a.c.) - Acceptance         NC       27 164 MECMA
                                inspection -- Part 21: Particular requirements for
                                electromechanical meters for active energy (classes 0,5, 1
670                             and 2 and class indexes A and B)
      EN 62058-31:2010          Electricity metering equipment (a.c.) - Acceptance             NC   25 164 MECMA
                                inspection -- Part 31: Particular requirements for static
                                meters for active energy (classes 0,2 S, 0,5 S, 1 and 2,
671                             and class indexes A, B and C)




                                           Pagina 54 din 346
      EN ISO 10414-2:2011           Petroleum and natural gas industries - Field testing of         NC   160 169 MECMA
                                    drilling fluids - Part 2: Oil-based fluids (ISO 10414-2:2011)
672
      EN ISO 11960:2011             Petroleum and natural gas industries - Steel pipes for use      NC   272 169 MECMA
                                    as casing or tubing for wells (ISO 11960:2011)
673
      EN ISO 13500:2008/A1:2010     Petroleum and natural gas industries - Drilling fluid      NC        14 169 MECMA
                                    materials - Specifications and tests - Amendment 1: Barite
674                                 4,1 (ISO 13500:2008/AMD 1:2010)
      EN ISO 13501:2011             Petroleum and natural gas industries - Drilling fluids -        NC   63 169 MECMA
675                                 Processing equipment evaluation (ISO 13501:2011)
      EN ISO 13628-1:2005/A1:2010   Petroleum and natural gas industries - Design and               NC   15 169 MECMA
                                    operation of subsea production systems - Part 1: General
                                    requirements and recommendations - Amendment 1:
                                    Revised Clause 6 (ISO 13628-1:2005/Amd 1:2010)
676
      EN ISO 13628-4:2010           Petroleum and natural gas industries - Design and               NC   254 169 MECMA
                                    operation of subsea production systems - Part 4: Subsea
                                    wellhead and tree equipment (ISO 13628-4:2010)
677
      EN ISO 13628-4:2010/AC:2011   Petroleum and natural gas industries - Design and               ER    7 169 MECMA
                                    operation of subsea production systems - Part 4: Subsea
                                    wellhead and tree equipment - Technical Corrigendum 1
678                                 (ISO 13628-4:2010/Cor 1:2011)
      EN ISO 13680:2010             Petroleum and natural gas industries - Corrosion-resistant      NC   92 169 MECMA
                                    alloy seamless tubes for use as casing, tubing and
                                    coupling stock - Technical delivery conditions (ISO
679                                 13680:2010)
      EN 14870-1:2011               Petroleum and natural gas industries - Induction bends,         NC   39 169 MECMA
                                    fittings and flanges for pipeline transportation systems -
                                    Part 1: Induction bends (ISO 15590-1:2009 modified)
680
      EN ISO 19901-3:2010           Petroleum and natural gas industries - Specific                 NC   119 169 MECMA
                                    requirements for offshore structures - Part 3: Topsides
681                                 structure (ISO 19901-3:2010)
      EN ISO 19906:2010             Petroleum and natural gas industries - Arctic offshore          NC   468 169 MECMA
682                                 structures (ISO 19906:2010)
      EN ISO 21457:2010             Petroleum, petrochemical and natural gas industries -           NC   42 169 MECMA
                                    Materials selection and corrosion control for oil and gas
683                                 production systems (ISO 21457:2010)
      EN ISO 28781:2010             Petroleum and natural gas industries - Drilling and             NC   53 169 MECMA
                                    production equipment - Subsurface barrier valves and
684                                 related equipment (ISO 28781:2010)
      EN ISO 2085:2010              Anodizing of aluminium and its alloys - Check for               NC    5 170 MECMA
                                    continuity of thin anodic oxidation coatings - Copper
685                                 sulfate test (ISO 2085:2010)
      EN ISO 2106:2011              Anodizing of aluminium and its alloys - Determination of        NC    8 170 MECMA
                                    mass per unit area (surface density) of anodic oxidation
                                    coatings - Gravimetric method (ISO 2106:2011)
686
      EN ISO 2128:2010              Anodizing of aluminium and its alloys - Determination of        NC    6 170 MECMA
                                    thickness of anodic oxidation coatings - Non-destructive
                                    measurement by split-beam microscope (ISO 2128:2010)
687
      EN ISO 2376:2010              Anodizing of aluminium and its alloys - Determination of        NC    6 170 MECMA
688                                 electric breakdown potential (ISO 2376:2010)
      EN ISO 3211:2010              Anodizing of aluminium and its alloys - Assessment of           NC    8 170 MECMA
                                    resistance of anodic oxidation coatings to cracking by
689                                 deformation (ISO 3211:2010)
      EN ISO 6719:2010              Anodizing of aluminium and its alloys - Measurement of          NC   12 170 MECMA
                                    reflectance characteristics of aluminium surfaces using
                                    integrating-sphere instruments (ISO 6719:2010)
690
      EN ISO 7668:2010              Anodizing of aluminium and its alloys - Measurement of     NC        16 170 MECMA
                                    specular reflectance and specular gloss of anodic
                                    oxidation coatings at angles of 20 degrees, 45 degrees, 60
                                    degrees or 85 degrees (ISO 7668:2010)
691
      EN ISO 7759:2010              Anodizing of aluminium and its alloys - Measurement of          NC   12 170 MECMA
                                    reflectance characteristics of aluminium surfaces using a
                                    goniophotometer or an abridged goniophotometer
692                                 (ISO/FDIS 7759:2010)



                                              Pagina 55 din 346
      EN ISO 8251:2011           Anodizing of aluminium and its alloys - Measurement of        NC   30 170 MECMA
                                 abrasion resistance of anodic oxidation coatings (ISO
693                              8251:2011)
      EN ISO 8993:2010           Anodizing of aluminium and its alloys - Rating system for     NC   14 170 MECMA
                                 the evaluation of pitting corrosion - Chart method (ISO
694                              8993:2010)
      EN ISO 8994:2011           Anodizing of aluminium and its alloys - Rating system for     NC    7 170 MECMA
                                 the evaluation of pitting corrosion - Grid method (ISO
695                              8994:2011)
      EN ISO 10215:2010          Anodizing of aluminium and its alloys - Visual                NC   10 170 MECMA
                                 determination of image clarity of anodic oxidation coatings
696                              - Chart scale method (ISO 10215:2010)
      EN 12163:2011              Copper and copper alloys - Rod for general purposes           NC   36 171 MECMA
697
      EN 12164:2011              Copper and copper alloys - Rod for free machining             NC   36 171 MECMA
698                              purposes
      EN 12165:2011              Copper and copper alloys - Wrought and unwrought              NC   27 171 MECMA
699                              forging stock
      EN 12166:2011              Copper and copper alloys - Wire for general purposes          NC   32 171 MECMA
700
      EN 12167:2011              Copper and copper alloys - Profiles and bars for general   NC      43 171 MECMA
701                              purposes
      EN 12168:2011              Copper and copper alloys - Hollow rod for free machining NC        31 171 MECMA
702                              purposes
      EN 12735-1:2010            Copper and copper alloys - Seamless, round copper tubes NC         19 171 MECMA
                                 for air conditioning and refrigeration - Part 1: Tubes for
703                              piping systems
      EN 12735-2:2010            Copper and copper alloys - Seamless, round copper tubes NC         23 171 MECMA
                                 for air conditioning and refrigeration - Part 2: Tubes for
704                              equipment
705 EN 13148:2010                Copper and copper alloys - Hot-dip tinned strip               NC   43 171 MECMA
706 EN 61400-1:2005/A1:2010      Wind turbines -- Part 1: Design requirements                  NC   30 174 MECMA
      EN 61400-22:2011           Wind turbines -- Part 22: Conformity testing and              NC   84 174 MECMA
707                              certification
708 EN 61400-24:2010             Wind turbines -- Part 24: Lightning protection                NC   158 174 MECMA
    EN 61400-25-6:2011           Wind turbines -- Part 25-6: Communications for monitoring NC       31 174 MECMA
                                 and control of wind power plants - Logical node classes
                                 and data classes for condition monitoring
709
      EN 61243-3:2010            Live working - Voltage detectors -- Part 3: Two-pole low-     NC   77 176 MECMA
710                              voltage type
      EN ISO 16120-1:2011        Non-alloy steel wire rod for conversion to wire - Part 1:     NC   24 184 MECMA
711                              General requirements (ISO 16120-1:2011)
      EN ISO 16120-2:2011        Non-alloy steel wire rod for conversion to wire - Part 2:     NC   10 184 MECMA
                                 Specific requirements for general-purpose wire rod (ISO
712                              16120-2:2011)
      EN ISO 1825:2011           Rubber hoses and hose assemblies for aircraft ground          NC   30 189 MECMA
                                 fuelling and defuelling - Specification (ISO 1825:2010)
713
      EN ISO 3994:2011           Plastics hoses - Helical-thermoplastic-reinforced             NC   17 189 MECMA
                                 thermoplastics hoses for suction and discharge of
714                              aqueous materials - Specification (ISO 3994:2007)
      EN ISO 4641:2011           Rubber hoses and hose assemblies for water suction and        NC   14 189 MECMA
                                 discharge - Specification (ISO 4641:2010)
715
      EN ISO 7751:1997/A1:2011   Rubber and plastics hoses and hose assemblies - Ratios NC           4 189 MECMA
                                 of proof and burst pressure to maximum working pressure -
                                  Amendment 1 - Replacement of "design working
                                 pressure" by "maximum working pressure" throughout text
                                 (ISO 7751:1991/Amd 1:2011)
716
      EN ISO 8029:2010           Plastics hose - General-purpose collapsible water hose,       NC   15 189 MECMA
                                 textile-reinforced - Specification (ISO 8029:2007)
717
      EN ISO 8331:2011           Rubber and plastics hoses and hose assemblies -               NC   15 189 MECMA
                                 Guidelines for selection, storage, use and maintenance
718                              (ISO 8331:2007)
      EN 12115:2011              Rubber and thermoplastics hoses and hose assemblies           NC   49 189 MECMA
                                 for liquid or gaseous chemicals - Specification
719




                                           Pagina 56 din 346
      EN ISO 10717:2010           Footwear - Test method for slide fasteners - Burst strength NC      9 190 MECMA
720                               (ISO 10717:2010)
      EN ISO 10748:2011           Footwear - Test method for slide fasteners - Slider locking NC      8 190 MECMA
721                               strength (ISO 10748:2011)
      EN 61190-1-3:2007/A1:2010   Attachment materials for electronic assembly -- Part 1-3:   NC      12 193 MECMA
                                  Requirements for electronic grade solder alloys and fluxed
                                  and non-fluxed solid solders for electronic soldering
722                               applications
      EN ISO 9905:1997/A1:2011    Technical specifications for centrifugal pumps - Class I -     NC   5 201 MECMA
723                               Amendment 1 (ISO 9905:1994/AMD 1:2011)
      EN ISO 9908:1997/A1:2011    Technical specifications for centrifugal pumps - Class III -   NC   4 201 MECMA
724                               Amendment 1 (ISO 9908:1993/AMD 1:2011)
      EN ISO 10893-1:2011         Non-destructive testing of steel tubes - Part 1: Automated     NC   17 202 MECMA
                                  electromagnetic testing of seamless and welded (except
                                  submerged arc-welded) steel tubes for the verification of
                                  hydraulic leaktightness (ISO 10893-1:2011)
725
      EN ISO 10893-10:2011        Non-destructive testing of steel tubes - Part 10: Automated NC      14 202 MECMA
                                  full peripheral ultrasonic testing of seamless and welded
                                  (except submerged arc-welded) steel tubes for the
                                  detection of longitudinal and/or transverse imperfections
                                  (ISO 10893-10:2011)
726
      EN ISO 10893-11:2011        Non-destructive testing of steel tubes - Part 11: Automated NC      12 202 MECMA
                                  ultrasonic testing of the weld seam of welded steel tubes
                                  for the detection of longitudinal and/or transverse
                                  imperfections (ISO 10893-11:2011)
727
      EN ISO 10893-12:2011        Non-destructive testing of steel tubes - Part 12: Automated NC      8 202 MECMA
                                  full peripheral ultrasonic thickness testing of seamless and
                                  welded (except submerged arc-welded) steel tubes (ISO
728                               10893-12:2011)
      EN ISO 10893-2:2011         Non-destructive testing of steel tubes - Part 2: Automated     NC   14 202 MECMA
                                  eddy current testing of seamless and welded (except
                                  submerged arc-welded) steel tubes for the detection of
                                  imperfections (ISO 10893-2:2011)
729
      EN ISO 10893-3:2011         Non-destructive testing of steel tubes - Part 3: Automated NC       12 202 MECMA
                                  full peripheral flux leakage testing of seamless and welded
                                  (except submerged arc-welded) ferromagnetic steel tubes
                                  for the detection of longitudinal and/or transverse
                                  imperfections (ISO 10893-3:2011)
730
      EN ISO 10893-4:2011         Non-destructive testing of steel tubes - Part 4: Liquid        NC   10 202 MECMA
                                  penetrant inspection of seamless and welded steel tubes
                                  for the detection of surface imperfections (ISO 10893-
731                               4:2011)
      EN ISO 10893-5:2011         Non-destructive testing of steel tubes - Part 5: Magnetic      NC   10 202 MECMA
                                  particle inspection of seamless and welded ferromagnetic
                                  steel tubes for the detection of surface imperfections (ISO
732                               10893-5:2011)
      EN ISO 10893-6:2011         Non-destructive testing of steel tubes - Part 6:               NC   17 202 MECMA
                                  Radiographic testing of the weld seam of welded steel
                                  tubes for the detection of imperfections (ISO 10893-
733                               6:2011)
      EN ISO 10893-7:2011         Non-destructive testing of steel tubes - Part 7: Digital       NC   20 202 MECMA
                                  radiographic testing of the weld seam of welded steel
                                  tubes for the detection of imperfections (ISO 10893-
734                               7:2011)
      EN ISO 10893-8:2011         Non-destructive testing of steel tubes - Part 8: Automated NC       13 202 MECMA
                                  ultrasonic testing of seamless and welded steel tubes for
                                  the detection of laminar imperfections (ISO 10893-8:2011)
735
      EN ISO 10893-9:2011         Non-destructive testing of steel tubes - Part 9: Automated NC       12 202 MECMA
                                  ultrasonic testing for the detection of laminar imperfections
                                  in strip/plate used for the manufacture of welded steel
                                  tubes (ISO 10893-9:2011)
736
      EN ISO 19879:2010           Metallic tube connections for fluid power and general use - NC      23 202 MECMA
                                  Test methods for hydraulic fluid power connections (ISO
737                               19879:2010)




                                            Pagina 57 din 346
      EN ISO 21809-1:2011   Petroleum and natural gas industries - External coatings         NC   57 202 MECMA
                            for buried or submerged pipelines used in pipeline
                            transportation systems - Part 1: Polyolefin coatings (3-
                            layer PE and 3-layer PP) (ISO 21809-1:2011)
738
      EN ISO 276:2010       Binders for paints and varnishes - Linseed stand oil -     NC         5 203 MECMA
739                         Requirements and methods of test (ISO 276:2002)
      EN ISO 277:2010       Binders for paints and varnishes - Raw tung oil -          NC         8 203 MECMA
740                         Requirements and methods of test (ISO 277:2002)
      EN ISO 1518-1:2011    Paints and varnishes - Determination of scratch resistance NC         10 203 MECMA
                            - Part 1: Constant-loading method (ISO 1518-1:2011)
741
      EN ISO 1519:2011      Paints and varnishes - Bend test (cylindrical mandrel) (ISO NC        12 203 MECMA
742                         1519:2011)
      EN ISO 2811-1:2011    Paints and varnishes - Determination of density - Part 1:   NC        13 203 MECMA
743                         Pyknometer method (ISO 2811-1:2011)
      EN ISO 2811-2:2011    Paints and varnishes - Determination of density - Part 2:   NC        12 203 MECMA
                            Immersed body (plummet) method (ISO 2811-2:2011)
744
      EN ISO 2811-3:2011    Paints and varnishes - Determination of density - Part 3:        NC   11 203 MECMA
745                         Oscillation method (ISO 2811-3:2011)
      EN ISO 2811-4:2011    Paints and varnishes - Determination of density - Part 4:        NC   11 203 MECMA
746                         Pressure cup method (ISO 2811-4:2011)
747 EN ISO 4619:2010        Driers for paints and varnishes (ISO 4619:1998)                  NC   20 203 MECMA
    EN ISO 8130-10:2010     Coating powders - Part 10: Determination of deposition           NC   8 203 MECMA
748                         efficiency (ISO 8130-10:1998)
    EN ISO 8130-11:2010     Coating powders - Part 11: Inclined-plane flow test (ISO         NC   7 203 MECMA
749                         8130-11:1997)
    EN ISO 8130-12:2010     Coating powders - Part 12: Determination of compatibility        NC   7 203 MECMA
750                         (ISO 8130-12:1998)
    EN ISO 8130-13:2010     Coating powders - Part 13: Particle size analysis by laser       NC   7 203 MECMA
751                         diffraction (ISO 8130-13:2001)
    EN ISO 8623:2010        Tall-oil fatty acids for paints and varnishes - Specifications   NC   10 203 MECMA
752                         and test methods (ISO 8623:1997)
    EN ISO 10890:2010       Paints and varnishes - Modelling of biocide release rate         NC   10 203 MECMA
                            from antifouling paints by mass-balance calculation (ISO
753                         10890:2010)
      EN ISO 10927:2011     Plastics - Determination of the molecular mass and               NC   16 203 MECMA
                            molecular mass distribution of polymer species by matrix-
                            assisted laser desorption/ionization time-of-flight mass
                            spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
754
      EN ISO 11664-1:2011   Colorimetry - Part 1: CIE standard colorimetric observers        NC   32 203 MECMA
755                         (ISO 11664-1:2007)
      EN ISO 11664-2:2011   Colorimetry - Part 2: CIE standard illuminants (ISO 11664-       NC   17 203 MECMA
756                         2:2007)
      EN ISO 11664-4:2011   Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO          NC   11 203 MECMA
757                         11664-4:2008)
      EN ISO 11664-5:2011   Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u',       NC   11 203 MECMA
                            v' uniform chromaticity scale diagram (ISO 11664-5:2009)
758
      EN 13523-11:2011      Coil coated metals - Test methods - Part 11: Resistance to NC         8 203 MECMA
759                         solvents (rubbing test)
      EN 13523-19:2011      Coil coated metals - Test methods - Part 19: Panel design NC          18 203 MECMA
760                         and method of atmospheric exposure testing
      EN ISO 14446:2010     Binders for paints and varnishes - Determination of the    NC         9 203 MECMA
                            viscosity of industrial cellulose nitrate solutions and
                            classification of such solutions (ISO 14446:1999)
761
      EN ISO 15234:2010     Paints and varnishes - Testing of formaldehyde-emitting          NC   15 203 MECMA
                            coatings and melamine foams - Determination of the
                            steady-state concentration of formaldehyde in a small test
                            chamber (ISO 15234:1999)
762
      EN 16074:2011         Paints and varnishes - Determination of non-volatile-       NC        10 203 MECMA
                            matter content and spreading rate of coil coating materials
763
      EN ISO 19334:2011     Binders for paints and varnishes - Gum rosin - Gas-              NC   10 203 MECMA
764                         chromatographic analysis (ISO 19334:2010)




                                       Pagina 58 din 346
      EN ISO 29601:2011             Paints and varnishes - Corrosion protection by protective      NC   10 203 MECMA
                                    paint systems - Assessment of porosity in a dry film (ISO
765                                 29601:2011)
      EN 15430-1:2007+A1:2011       Winter and road service area maintenance equipments -          NC   52 218 MECMA
                                    Data acquisition and transmission - Part 1: In vehicle data
766                                 acquisition
      EN 15518-1:2011               Winter maintenance equipment - Road weather                    NC    9 218 MECMA
                                    information systems - Part 1: Global definitions and
767                                 components
      EN 15518-2:2011               Winter maintenance equipment - Road weather                    NC    8 218 MECMA
                                    information systems - Part 2: Road weather -
768                                 Recommended observation and forecast
      EN 15518-3:2011               Winter maintenance equipment - Road weather                    NC   11 218 MECMA
                                    information systems - Part 3: Requirements on measured
769                                 values of stationary equipments
      EN ISO 5264-2:2011            Pulps - Laboratory beating - Part 2: PFI mill method (ISO      NC   14 221 MECMA
770                                 5264-2:2011)
      EN ISO 7263:2011              Corrugating medium - Determination of the flat crush           NC   11 221 MECMA
771                                 resistance after laboratory fluting (ISO 7263:2011)
      EN ISO 12625-8:2010           Tissue paper and tissue products - Part 8: Water-              NC   10 221 MECMA
                                    absorption time and water-absorption capacity, basket-
772                                 immersion test method (ISO 12625-8:2010)
      EN 50540:2010                 Conductors for overhead lines - Aluminium Conductors       NC       31 224 MECMA
773                                 Steel Supported (ACSS)
      EN 12953-6:2011               Shell Boilers - Part 6: Requirements for equipment for the NC       49 225 MECMA
774                                 boiler
      EN 13203-3:2010               Solar supported gas-fired domestic appliances producing NC          32 225 MECMA
                                    hot water - Appliances not exceeding 70 kW heat input
                                    and 500 litres water storage capacity - Part 3: Assessment
775                                 of energy consumption
      EN 15420:2010                 Gas-fired central heating boilers - Type C boilers of          NC   168 225 MECMA
                                    nominal heat input exceeding 70 kW, but not exceeding 1
776                                 000 kW
      EN ISO 8624:2011              Ophthalmic optics - Spectacle frames - Measuring system NC          12 230 MECMA
777                                 and terminology (ISO 8624:2011)
      EN ISO 13212:2011             Ophthalmic optics - Contact lens care products -            NC      10 230 MECMA
                                    Guidelines for determination of shelf-life (ISO 13212:2011)
778
      EN 16128:2011                 Reference test method for release of nickel from those         NC   17 230 MECMA
                                    parts of spectacle frames and sunglasses intended to
                                    come into close and prolonged contact with the skin
779
      EN ISO 11363-1:2010/AC:2011   Gas cylinders - 17E and 25E taper threads for connection       ER    4 231 MECMA
                                    of valves to gas cylinders - Part 1: Specifications -
                                    Technical Corrigendum 1 (ISO 11363-1:2010/Cor 1:2011)
780
      EN 12542:2010                 LPG equipment and accessories - Static welded steel            NC   62 231 MECMA
                                    cylindrical tanks, serially produced for the storage of
                                    Liquefied Petroleum Gas (LPG) having a volume not
                                    greater than 13 m3 - Design and manufacture
781
      EN 12816:2010                 LPG equipment and accessories - Transportable refillable       NC    9 231 MECMA
782                                 LPG cylinders - Disposal
      EN 13109:2010                 LPG equipment and accessories - LPG tanks and drums -          NC   13 231 MECMA
783                                 Disposal
      EN ISO 13341:2010             Gas cylinders - Fitting of valves to gas cylinders (ISO        NC   11 231 MECMA
784                                 13341:2010)
      EN 13869:2002+A1:2011         Lighters - Child-resistance for lighters - Safety              NC   16 231 MECMA
785                                 requirements and test methods
      EN 14638-3:2010               Transportable gas cylinders - Refillable welded                NC   39 231 MECMA
                                    receptacles of a capacity not exceeding 150 litres - Part 3:
                                    Welded carbon steel cylinders made to a design justified
786                                 by experimental methods
      EN 14894:2011                 LPG equipment and accessories - Cylinder and drum              NC   12 231 MECMA
787                                 marking
      EN ISO 22434:2011             Transportable gas cylinders - Inspection and maintenance       NC   10 231 MECMA
788                                 of cylinder valves (ISO 22434:2006)
      EN 1447:2009+A1:2010          Plastics piping systems - Glass-reinforced thermosetting       NC   10 237 MECMA
                                    plastics (GRP) pipes - Determination of long-term
789                                 resistance to internal pressure




                                              Pagina 59 din 346
      EN ISO 1452-3:2010                Plastics piping systems for water supply and for buried  NC        40 237 MECMA
                                        and above-ground drainage and sewerage under pressure
                                        - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3:
                                        Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
790
      EN ISO 1452-5:2010                Plastics piping systems for water supply and for buried NC         16 237 MECMA
                                        and above-ground drainage and sewerage under pressure
                                        - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5:
                                        Fitness for purpose of the system (ISO 1452-5:2009,
791                                     corrected version 2010-03-01)
      EN 1555-1:2010                    Plastics piping systems for the supply of gaseous fuels -     NC   16 237 MECMA
792                                     Polyethylene (PE) - Part 1: General
      EN 1555-2:2010                    Plastics piping systems for the supply of gaseous fuels -     NC   23 237 MECMA
793                                     Polyethylene (PE) - Part 2: Pipes
      EN 1555-3:2010                    Plastics piping systems for the supply of gaseous fuels -     NC   29 237 MECMA
794                                     Polyethylene (PE) - Part 3: Fittings
      EN 1555-4:2011                    Plastics piping systems for the supply of gaseous fuels -     NC   19 237 MECMA
795                                     Polyethylene (PE) - Part 4: Valves
      EN 1555-5:2010                    Plastics piping systems for the supply of gaseous fuels -     NC   15 237 MECMA
                                        Polyethylene (PE) - Part 5: Fitness for purpose of the
796                                     system
      EN ISO 11296-1:2011               Plastics piping systems for renovation of underground non- NC      16 237 MECMA
                                        pressure drainage and sewerage networks - Part 1:
797                                     General (ISO 11296-1:2009)
      EN ISO 11296-3:2011               Plastics piping systems for renovation of underground non- NC      22 237 MECMA
                                        pressure drainage and sewerage networks - Part 3: Lining
                                        with close-fit pipes (ISO 11296-3:2009+Cor 1:2011)
798
      EN ISO 11296-4:2011               Plastics piping systems for renovation of underground non- NC      35 237 MECMA
                                        pressure drainage and sewerage networks - Part 4: Lining
                                        with cured-in-place pipes (ISO 11296-4:2009, corrected
799                                     version 2010-06-01)
      EN ISO 11298-1:2011               Plastics piping systems for renovation of underground         NC   17 237 MECMA
                                        water supply networks - Part 1: General (ISO 11298-
800                                     1:2010)
      EN ISO 11298-3:2011               Plastics piping systems for renovation of underground         NC   17 237 MECMA
                                        water supply networks - Part 3: Lining with close-fit pipes
801                                     (ISO 11298-3:2010)
      EN 13121-3:2008+A1:2010/AC:2011   GRP tanks and vessels for use above ground - Part 3:       ER      16 237 MECMA
802                                     Design and workmanship
      EN 13598-1:2010                   Plastics piping systems for non-pressure underground       NC      22 237 MECMA
                                        drainage and sewerage - Unplasticized poly(vinyl chloride)
                                        (PVC-U), polypropylene (PP) and polyethylene (PE) - Part
                                        1: Specifications for ancillary fittings including shallow
                                        inspection chambers
803
      EN 14982:2006+A1:2010             Plastics piping and ducting systems - Thermoplastics          NC   12 237 MECMA
                                        shafts or risers for inspection chambers and manholes -
                                        Determination of ring stiffness
804
      EN ISO 15877-1:2009/A1:2010       Plastics piping systems for hot and cold water installations NC    5 237 MECMA
                                        - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General
                                        - Amendment 1 (ISO 15877-1:2009/AMD 1:2010)
805
      EN ISO 15877-2:2009/A1:2010       Plastics piping systems for hot and cold water installations NC    4 237 MECMA
                                        - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes -
                                        Amendment 1 (ISO 15877-2:2009/AMD 1:2010)
806
      EN ISO 15877-3:2009/A1:2010       Plastics piping systems for hot and cold water installations NC    4 237 MECMA
                                        - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings -
                                         Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
807
      EN ISO 15877-5:2009/A1:2010       Plastics piping systems for hot and cold water installations NC    5 237 MECMA
                                        - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness
                                        for purpose of the system - Amendment 1 (ISO 15877-
808                                     5:2009/AMD 1:2010)
      EN ISO 21003-2:2008/A1:2011       Multilayer piping systems for hot and cold water              NC   4 237 MECMA
                                        installations inside buildings - Part 2: Pipes - Amendment
809                                     1 (ISO 21003-2:2008/Amd 1:2011)
      EN 60456:2005/A12:2011            Clothes washing machines for household use - Methods          NC   3 238 MECMA
810                                     for measuring the performance




                                                  Pagina 60 din 346
      EN 60704-2-13:2011            Household and similar electrical appliances - Test code for NC     28 238 MECMA
                                    the determination of airborne acoustical noise -- Part 2-13:
                                    Particular requirements for range hoods
811
      EN 61591:1997/A2:2011         Household range hoods and other cooking fume                 NC    12 238 MECMA
812                                 extractors - Methods for measuring performance
      EN 60335-2-109:2010           Household and similar electrical appliances - Safety -- Part NC    21 239 MECMA
                                    2-109: Particular requirements for UV radiation water
813                                 treatment appliances
      EN 60335-2-11:2010            Household and similar electrical appliances - Safety -- Part NC    37 239 MECMA
814                                 2-11: Particular requirements for tumble dryers
      EN 60335-2-2:2003/A11:2010    Household and similar electrical appliances - Safety -- Part NC     8 239 MECMA
                                    2-2: Particular requirements for vacuum cleaners and
815                                 water-suction cleaning appliances
      EN 60335-2-23:2003/A11:2010   Household and similar electrical appliances - Safety -- Part NC     7 239 MECMA
                                    2-23: Particular requirements for appliances for skin or
816                                 hair care
      EN 60335-2-3:2002/A11:2010    Household and similar electrical appliances - Safety -- Part NC     8 239 MECMA
817                                 2-3: Particular requirements for electric irons
      EN 60335-2-52:2003/A11:2010   Household and similar electrical appliances - Safety -- Part NC     8 239 MECMA
                                    2-52: Particular requirements for oral hygiene appliances
818
      EN 60335-2-6:2003/A11:2010    Household and similar electrical appliances - Safety -- Part NC     9 239 MECMA
                                    2-6: Particular requirements for stationary cooking ranges,
819                                 hobs, ovens and similar appliances
      EN 60335-2-7:2003/A11:2010    Household and similar electrical appliances - Safety -- Part NC     7 239 MECMA
                                    2-7: Particular requirements for washing machines
820
      EN 60666:2010                 Detection and determination of specified additives in     NC       35 264 MECMA
821                                 mineral insulating oils
      EN 61099:2010                 Insulating liquids - Specifications for unused synthetic  NC       18 264 MECMA
822                                 organic esters for electrical purposes
      EN ISO 4180:2010              Packaging - Complete, filled transport packages - General NC       21 270 MECMA
                                    rules for the compilation of performance test schedules
823                                 (ISO 4180:2009)
      EN 13044-1:2011               Intermodal Loading Units - Marking - Part 1: Markings for     NC   11 270 MECMA
824                                 identification
      EN 13044-2:2011               Intermodal Loading Units - Marking - Part 2: Markings of      NC   11 270 MECMA
825                                 swap bodies related to rail operation
      EN 13044-3:2011               Intermodal Loading Units - Marking - Part 3: Markings of      NC    8 270 MECMA
826                                 semi-trailers related to rail operation
      EN 15904:2010                 Glass packaging - Standard tolerances for flaconnage          NC   13 270 MECMA
827
      EN 12829:2011                 Surface active agents - Preparation of water with known     NC      9 298 MECMA
828                                 calcium and magnesium hardness
      EN 13623:2010                 Chemical disinfectants and antiseptics - Quantitative       NC     35 298 MECMA
                                    suspension test for the evaluation of bactericidal activity
                                    against Legionella of chemical disinfectants for aqueous
                                    systems - Test method and requirements (phase 2, step 1)
829
      EN ISO 16212:2011             Cosmetics - Microbiology - Enumeration of yeast and        NC      22 298 MECMA
830                                 mould (ISO 16212:2008)
      EN ISO 18415:2011             Cosmetics - Microbiology - Detection of specified and non- NC      21 298 MECMA
831                                 specified microorganisms (ISO 18415:2007)
      EN ISO 24444:2010             Cosmetics - Sun protection test methods - In vivo          NC      48 298 MECMA
                                    determination of the sun protection factor (SPF) (ISO
832                                 24444:2010)
      EN ISO 29621:2011             Cosmetics - Microbiology - Guidelines for the risk            NC   13 298 MECMA
                                    assessment and identification of microbiologically low-risk
833                                 products (ISO 29621:2010)
      EN 30-1-1:2008+A2:2010        Domestic cooking appliances burning gas - Part 1-1:          NC    149 305 MECMA
834                                 Safety - General
      EN 88-1:2011                  Pressure regulators and associated safety devices for gas NC       47 305 MECMA
                                    appliances - Part 1: Pressure regulators for inlet pressures
835                                 up to and including 50 kPa
      EN 161:2011                   Automatic shut-off valves for gas burners and gas             NC   34 305 MECMA
836                                 appliances
837 EN 257:2010                     Mechanical thermostats for gas-burning appliances             NC   34 305 MECMA
    EN 624:2011                     Specification for dedicated LPG appliances - Room sealed NC        58 305 MECMA
                                    LPG space heating equipment for installation in vehicles
838                                 and boats




                                              Pagina 61 din 346
      EN 1949:2011            Specification for the installation of LPG systems for            NC   36 305 MECMA
                              habitation purposes in leisure accommodation vehicles
                              and accommodation purposes in other vehicles
839
      EN 60099-8:2011         Surge arresters -- Part 8: Metal-oxide surge arresters with NC        66 311 MECMA
                              external series gap (EGLA) for overhead transmission and
                              distribution lines of a.c. systems above 1 kV
840
841 EN 50556:2011             Road traffic signal systems                                      NC   35 312 MECMA
    EN 61558-2-12:2011        Safety of transformers, reactors, power supply units and         NC   23 312 MECMA
                              combinations thereof -- Part 2-12: Particular requirements
                              and tests for constant voltage transformers and power
                              supply units for constant voltage
842
      EN 61558-2-20:2011      Safety of transformers, reactors, power supply units and         NC   21 312 MECMA
                              combinations thereof -- Part 2-20: Particular requirements
843                           and tests for small reactors
      EN 61558-2-3:2010       Safety of transformers, reactors, power supply units and         NC   21 312 MECMA
                              combinations thereof -- Part 2-3: Particular requirements
                              and tests for ignition transformers for gas and oil burners
844
      EN 61558-2-5:2010       Safety of transformers, reactors, power supply units and         NC   19 312 MECMA
                              combinations thereof -- Part 2-5: Particular requirements
                              and tests for transformer for shavers, power supply units
                              for shavers and shaver supply units
845
      EN 61558-2-8:2010       Safety of transformers, reactors, power supply units and         NC   19 312 MECMA
                              combinations thereof -- Part 2-8: Particular requirements
                              and tests for transformers and power supply units for bells
846                           and chimes
      EN 61558-2-9:2011       Safety of transformers, reactors, power supply units and    NC        17 312 MECMA
                              combinations thereof -- Part 2-9: Particular requirements
                              and tests for transformers and power supply units for class
                              III handlamps for tungsten filament lamps
847
      EN 62041:2010           Safety of transformers, reactors, power supply units and         NC   22 312 MECMA
848                           combinations thereof - EMC requirements
      EN ISO 4263-3:2010      Petroleum and related products - Determination of the            NC   24 320 MECMA
                              ageing behaviour of inhibited oils and fluids using the
                              TOST test - Part 3: Anhydrous procedure for synthetic
849                           hydraulic fluids (ISO 4263-3:2010)
      EN ISO 4404-2:2010      Petroleum and related products - Determination of the            NC   10 320 MECMA
                              corrosion resistance of fire-resistant hydraulic fluids - Part
850                           2: Non-aqueous fluids (ISO 4404-2:2010)
      EN 12846-1:2011         Bitumen and bituminous binders - Determination of efflux         NC   12 320 MECMA
                              time by the efflux viscometer - Part 1: Bituminous
851                           emulsions
      EN 12846-2:2011         Bitumen and bituminous binders - Determination of efflux         NC   11 320 MECMA
                              time by the efflux viscometer - Part 2: Cut-back and fluxed
852                           bituminous binders
      EN 13074-1:2011         Bitumen and bituminous binders - Recovery of binder from NC           10 320 MECMA
                              bituminous emulsion or cut-back or fluxed bituminous
                              binders - Part 1: Recovery by evaporation
853
      EN 13074-2:2011         Bitumen and bituminous binders - Recovery of binder from NC           6 320 MECMA
                              bituminous emulsion or cut-back or fluxed bituminous
                              binders - Part 2: Stabilisation after recovery by evaporation
854
      EN 13614:2011           Bitumen and bituminous binders - Determination of                NC   9 320 MECMA
                              adhesivity of bituminous emulsions by water immersion
855                           test
      EN 14733:2005+A1:2010   Bitumen and bituminous binders - Bituminous emulsions,           NC   20 320 MECMA
                              fluxed and cut-back bitumen factory production control
856
      EN 15938:2010           Automotive fuels - Ethanol blending component and                NC   10 320 MECMA
                              ethanol (E85) automotive fuel - Determination of electrical
857                           conductivity
      EN 15944:2010           Liquid petroleum products - Determination of nickel and          NC   11 320 MECMA
                              vanadium content - Inductively coupled plasma optical
858                           emission spectrometry method (ICP OES)




                                         Pagina 62 din 346
      EN 15984:2011           Petroleum industry and products - Determination of                NC   21 320 MECMA
                              composition of refinery heating gas and calculation of
                              carbon content and calorific value - Gas chromatography
859                           method
      EN ISO 16591:2010       Petroleum products - Determination of sulfur content -            NC   18 320 MECMA
                              Oxidative microcoulometry method (ISO 16591:2010)
860
      EN ISO 20783-1:2011     Petroleum and related products - Determination of                 NC   10 320 MECMA
                              emulsion stability of fire-resistant fluids - Part 1: Fluids in
861                           category HFAE (ISO 20783-1:2011)
      EN ISO 20843:2011       Petroleum and related products - Determination of pH of           NC    7 320 MECMA
                              fire-resistant fluids within categories HFAE, HFAS and
862                           HFC (ISO 20843:2011)
      EN ISO 20884:2011       Petroleum products - Determination of sulfur content of           NC   12 320 MECMA
                              automotive fuels - Wavelength-dispersive X-ray
863                           fluorescence spectrometry (ISO 20884:2011)
      EN 649:2011             Resilient floor coverings - Homogenous and heterogenous NC             12 324 MECMA
                              polyvinyl chloride floor coverings - Specification
864
      EN 651:2011             Resilient floor coverings - Polyvinyl chloride floor              NC   13 324 MECMA
865                           coverings with foam layer - Specification
      EN 652:2011             Resilient floor coverings - Polyvinyl chloride floor              NC   13 324 MECMA
866                           coverings with cork-based backing - Specification
      EN 653:2011             Resilient floor coverings - Expanded (cushioned) polyvinyl        NC   13 324 MECMA
867                           chloride floor coverings - Specification
      EN 654:2011             Resilient floor coverings - Semi-flexible polyvinyl chloride      NC   11 324 MECMA
868                           tiles - Specification
      EN 655:2011             Resilient floor coverings - Tiles of agglomerated                 NC   12 324 MECMA
                              composition cork with polyvinyl chloride wear layer -
869                           Specification
      EN 686:2011             Resilient floor coverings - Specification for plain and           NC   11 324 MECMA
870                           decorative linoleum on a foam backing
      EN 687:2011             Resilient floor coverings - Specification for plain and           NC   10 324 MECMA
871                           decorative linoleum on a corkment backing
      EN 688:2011             Resilient floor coverings - Specification for corklinoleum        NC   10 324 MECMA
872
      EN 1300:2004+A1:2011    Secure storage units - Classification for high security locks NC       40 336 MECMA
                              according to their resistance to unauthorized opening
873
      EN 1238:2011            Adhesives - Determination of the softening point of               NC   11 338 MECMA
874                           thermoplastic adhesives (ring and ball)
875 EN 1239:2011              Adhesives - Freeze-thaw stability                                 NC    6 338 MECMA
    EN 1240:2011              Adhesives - Determination of hydroxyl value and/or                NC    7 338 MECMA
876                           hydroxyl content
    EN 1243:2011              Adhesives - Determination of free formaldehyde in amino           NC    6 338 MECMA
877                           and amidoformaldehyde condensates
878 EN 1245:2011              Adhesives - Determination of pH                                   NC    7 338 MECMA
      EN 1965-1:2011          Structural adhesives - Corrosion - Part 1: Determination          NC    6 338 MECMA
                              and classification of corrosion to a copper substrate
879
      EN 1965-2:2011          Structural adhesives - Corrosion - Part 2: Determination          NC   10 338 MECMA
                              and classification of corrosion to a brass substrate
880
      EN 12962:2011           Adhesives - Determination of elastic behaviour of liquid   NC           8 338 MECMA
881                           adhesives (elasticity index)
      EN 14869-1:2011         Structural adhesives - Determination of shear behaviour of NC          13 338 MECMA
                              structural bonds - Part 1: Torsion test method using butt-
                              bonded hollow cylinders (ISO 11003-1:2001, modified)
882
      EN 14869-2:2011         Structural adhesives - Determination of shear behaviour of NC          20 338 MECMA
                              structural bonds - Part 2: Thick adherends shear test (ISO
883                           11003-2:2001, modified)
      EN 61936-1:2010         Power installations exceeding 1 kV a.c. -- Part 1: Common NC           122 340 MECMA
884                           rules
885 EN 61936-1:2010/AC:2011                                                             ER            1 340 MECMA
    EN ISO 6145-5:2010        Gas analysis - Preparation of calibration gas mixtures            NC   17 357 MECMA
                              using dynamic volumetric methods - Part 5: Capillary
886                           calibration devices (ISO 6145-5:2009)
      EN ISO 6145-7:2010      Gas analysis - Preparation of calibration gas mixtures   NC            18 357 MECMA
                              using dynamic volumetric methods - Part 7: Thermal mass-
887                           flow controllers (ISO 6145-7:2009)




                                         Pagina 63 din 346
      EN ISO 6145-9:2010            Gas analysis - Preparation of calibration gas mixtures          NC   17 357 MECMA
                                    using dynamic volumetric methods - Part 9: Saturation
888                                 method (ISO 6145-9:2009)
      EN ISO 28460:2010             Petroleum and natural gas industries - Installation and         NC   31 357 MECMA
                                    equipment for liquefied natural gas - Ship-to-shore
                                    interface and port operations (ISO 28460:2010)
889
      EN 60065:2002/A12:2011        Audio, video and similar electronic apparatus - Safety          NC    7 368 MECMA
890                                 requirements
      EN 60950-1:2006/A1:2010       Information technology equipment - Safety -- Part 1:            NC   47 368 MECMA
891                                 General requirements
      EN 60950-1:2006/A12:2011      Information technology equipment - Safety -- Part 1:            NC    8 368 MECMA
892                                 General requirements
      EN 50160:2010                 Voltage characteristics of electricity supplied by public       NC   34 167 MECTS
893                                 electricity networks
      EN 60027-7:2010               Letter symbols to be used in electrical technology -- Part 7:   NC   32 173 MECTS
                                    Power generation, transmission and distribution
894
      EN ISO 19110:2006/A1:2011     Geographic information - Methodology for feature      NC             45 359 MECTS
                                    cataloguing - Amendment 1 (ISO 19110:2005/AMD 1:2011)
895
      EN ISO 19119:2006/A1:2011     Geographic information - Services - Amendment 1:                NC    7 359 MECTS
                                    Extensions of the service metadata model (ISO
896                                 19119:2005/AMD 1:2008)
      EN ISO 19142:2010             Geographic information - Web Feature Service (ISO        NC          241 359 MECTS
897                                 19142:2010)
      EN ISO 19146:2010             Geographic information - Cross-domain vocabularies (ISO NC           34 359 MECTS
898                                 19146:2010)
      EN ISO 10801:2010             Nanotechnologies - Generation of metal nanoparticles for NC          25 378 MECTS
                                    inhalation toxicity testing using the
899                                 evaporation/condensation method (ISO 10801:2010)
      EN ISO 10808:2010             Nanotechnologies - Characterization of nanoparticles in      NC      21 378 MECTS
                                    inhalation exposure chambers for inhalation toxicity testing
900                                 (ISO 10808:2010)
      EN ISO 29701:2010             Nanotechnologies - Endotoxin test on nanomaterial               NC   23 378 MECTS
                                    samples for in vitro systems - Limulus amebocyte lysate
901                                 (LAL) test (ISO 29701:2010)
      EN 1247:2004+A1:2010          Foundry machinery - Safety requirements for ladles,             NC   40   47 MMFPS
                                    pouring equipment, centrifugal casting machines,
902                                 continuous and semi continuous casting machines
      EN ISO 9241-129:2010          Ergonomics of human-system interaction - Part 129:              NC   54   54 MMFPS
                                    Guidance on software individualization (ISO 9241-
903                                 129:2010)
      EN ISO 9241-210:2010          Ergonomics of human-system interaction - Part 210:              NC   35   54 MMFPS
                                    Human-centred design for interactive systems (ISO 9241-
904                                 210:2010)
      EN ISO 24500:2010             Ergonomics - Accessible design - Auditory signals for           NC   10   54 MMFPS
905                                 consumer products (ISO 24500:2010)
      EN ISO 24501:2010             Ergonomics - Accessible design - Sound pressure levels          NC   24   54 MMFPS
                                    of auditory signals for consumer products (ISO
906                                 24501:2010)
      EN ISO 24502:2010             Ergonomics - Accessible design - Specification of age-          NC   13   54 MMFPS
                                    related luminance contrast for coloured light (ISO
907                                 24502:2010)
      EN ISO 24503:2011             Ergonomics - Accessible design - Tactile dots and bars on NC          8   54 MMFPS
908                                 consumer products (ISO 24503:2011)
      EN 958:2006+A1:2010           Mountaineering equipment - Energy absorbing systems for NC           12   66 MMFPS
                                    use in klettersteig (via ferrata) climbing - Safety
909                                 requirements and test methods
      EN 13089:2011                 Mountaineering equipment - Ice-tools - Safety                   NC   14   66 MMFPS
910                                 requirements and test methods
      EN 1679-1:1998+A1:2011        Reciprocating internal combustion engines - Safety - Part       NC   21   76 MMFPS
911                                 1: Compression ignition engines
      EN 12601:2010                 Reciprocating internal combustion engine driven                 NC   34   76 MMFPS
912                                 generating sets - Safety
      EN ISO 4254-1:2009/AC:2010    Agricultural machinery - Safety - Part 1: General               ER    2   77 MMFPS
913                                 requirements (ISO 4254-1:2008)
      EN ISO 4254-10:2009/AC:2010   Agricultural machinery - Safety - Part 10: Rotary tedders       ER    2   77 MMFPS
914                                 and rakes (ISO 4254-10:2009)
      EN ISO 4254-11:2010           Agricultural machinery - Safety - Part 11: Pick-up balers       NC   18   77 MMFPS
915                                 (ISO 4254-11:2010)




                                              Pagina 64 din 346
      EN ISO 4254-5:2009/AC:2011   Agricultural machinery - Safety - Part 5: Power-driven soil-    ER    3   77 MMFPS
916                                working machines (ISO 4254-5:2008)
      EN ISO 4254-6:2009/AC:2010   Agricultural machinery - Safety - Part 6: Sprayers and          ER    2   77 MMFPS
917                                liquid fertilizer distributors (ISO 4254-6:2009)
      EN ISO 4254-7:2009/AC:2010   Agricultural machinery - Safety - Part 7: Combine               ER    2   77 MMFPS
                                   harvesters, forage harvesters and cotton harvesters (ISO
918                                4254-7:2008)
      EN 13683:2003+A2:2011        Garden equipment - Integrally powered                           NC   62   77 MMFPS
919                                shredders/chippers - Safety
      EN 15811:2009/AC:2010        Agricultural machinery - Guards for moving parts of power       ER    2   77 MMFPS
                                   transmission - Guard opening with tool (ISO/TS
920                                28923:2007 modified)
      EN ISO 22868:2011            Forestry and gardening machinery - Noise test code for          NC   39   77 MMFPS
                                   portable hand-held machines with internal combustion
                                   engine - Engineering method (Grade 2 accuracy) (ISO
921                                22868:2011)
      EN 617:2001+A1:2010          Continuous handling equipment and systems - Safety and          NC   44   84 MMFPS
                                   EMC requirements for the equipment for the storage of
                                   bulk materials in silos, bunkers, bins and hoppers
922
      EN 618:2002+A1:2010          Continuous handling equipment and systems - Safety and          NC   67   84 MMFPS
                                   EMC requirements for equipment for mechanical handling
                                   of bulk materials except fixed belt conveyors
923
      EN 619:2002+A1:2010          Continuous handling equipment and systems - Safety and          NC   77   84 MMFPS
                                   EMC requirements for equipment for mechanical handling
924                                of unit loads
      EN 620:2002+A1:2010          Continuous handling equipment and systems - Safety and          NC   55   84 MMFPS
                                   EMC requirements for fixed belt conveyors for bulk
925                                materials
      EN 741:2000+A1:2010          Continuous handling equipment and systems - Safety              NC   36   84 MMFPS
                                   requirements for systems and their components for
926                                pneumatic handling of bulk materials
      EN 81-41:2010                Safety rules for the construction and installation of lifts -   NC   96   85 MMFPS
                                   Special lifts for the transport of persons and goods - Part
                                   41: Vertical lifting platforms intended for use by persons
927                                with impaired mobility
      EN 1175-1:1998+A1:2010       Safety of industrial trucks - Electrical requirements - Part    NC   48   85 MMFPS
                                   1: General requirements for battery powered trucks
928
      EN 1175-3:1998+A1:2010       Safety of industrial trucks - Electrical requirements - Part    NC   20   85 MMFPS
                                   3: Specific requirements for the electric power
                                   transmission systems of internal combustion engine
929                                powered trucks
930 EN 12999:2011                  Cranes - Loader cranes                                          NC   90   85 MMFPS
931 EN 13001-2:2011                Crane safety - General design - Part 2: Load actions            NC   60   85 MMFPS
      EN 13411-4:2011              Terminations for steel wire ropes - Safety - Part 4: Metal      NC   22   85 MMFPS
932                                and resin socketing
933 EN 15011:2011                  Cranes - Bridge and gantry cranes                               NC   94   85 MMFPS
    EN 50104:2010                  Electrical apparatus for the detection and measurement of NC         29 137 MMFPS
                                   oxygen - Performance requirements and test methods
934
      EN 50223:2010                Stationary electrostatic application equipment for ignitable NC      48 137 MMFPS
935                                flock material - Safety requirements
      EN 50271:2010                Electrical apparatus for the detection and measurement of NC         28 137 MMFPS
                                   combustible gases, toxic gases or oxygen - Requirements
                                   and tests for apparatus using software and/or digital
936                                technologies
      EN 50291-1:2010              Electrical apparatus for the detection of carbon monoxide       NC   22 137 MMFPS
                                   in domestic premises -- Part 1: Test methods and
937                                performance requirements
      EN 50291-2:2010              Electrical apparatus for the detection of carbon monoxide NC         14 137 MMFPS
                                   in domestic premises -- Part 2: Electrical apparatus for
                                   continuous operation in a fixed installation in recreational
                                   vehicles and similar premises including recreational craft -
                                   Additional test methods and performance requirements
938
      EN 50543:2011                Electronic portable and transportable apparatus designed        NC   13 137 MMFPS
                                   to detect and measure carbon dioxide and/or carbon
                                   monoxide in indoor ambient air - Requirements and test
939                                methods




                                              Pagina 65 din 346
      EN 60079-15:2010              Explosive atmospheres -- Part 15: Equipment protection        NC   82 137 MMFPS
940                                 by type of protection "n"
      EN 60079-25:2010              Explosive atmospheres -- Part 25: Intrinsically safe          NC   80 137 MMFPS
941                                 electrical systems
      EN 60079-13:2010              Explosive atmospheres -- Part 13: Equipment protection        NC   40 137 MMFPS
942                                 by pressurized room "p"
      EN 60079-19:2011              Explosive atmospheres -- Part 19: Equipment repair,           NC   70 137 MMFPS
943                                 overhaul and reclamation
      EN 13977:2011                 Railway applications - Track - Safety requirements for        NC   47 146 MMFPS
                                    portable machines and trolleys for construction and
944                                 maintenance
      EN 12463:2004+A1:2011         Food processing machinery - Filling machines and              NC   61 148 MMFPS
                                    auxiliary machines - Safety and hygiene requirements
945
      EN 15774:2010                 Food processing machinery - Machines for processing           NC   69 148 MMFPS
                                    fresh and filled pasta (tagliatelle, cannelloni, ravioli,
                                    tortellini, orecchiette and gnocchi) - Safety and hygiene
946                                 requirements
      EN 972:1998+A1:2010           Tannery machines - Reciprocating roller machines - Safety NC       48 154 MMFPS
947                                 requirements
      EN 972:1998+A1:2010/AC:2011   Tannery machines - Reciprocating roller machines - Safety ER       2 154 MMFPS
948                                 requirements
      EN 1010-1:2004+A1:2010        Safety of machinery - Safety requirements for the design  NC       58 154 MMFPS
                                    and construction of printing and paper converting
949                                 machines - Part 1: Common requirements
      EN 1010-2:2006+A1:2010        Safety of machinery - Safety requirements for the design      NC   62 154 MMFPS
                                    and construction of printing and paper converting
                                    machines - Part 2: Printing and varnishing machines
950                                 including pre-press machinery
      EN 13113:2002+A1:2010         Tannery machines - Roller coating machines - Safety          NC    39 154 MMFPS
951                                 requirements
      EN 50340:2010                 Hydraulic cable cutting devices - Devices to be used on      NC    28 176 MMFPS
                                    electrical installations with nominal voltage up to AC 30 kV
952
      EN 50528:2010                 Insulating ladders for use on or near low voltage electrical NC    22 176 MMFPS
953                                 installations
      EN 61236:2011                 Live working - Saddles, stick clamps and their accessories NC      52 176 MMFPS
954
      EN 1829-2:2008/AC:2011        High-pressure water jet machines - Safety requirements -      ER   2 201 MMFPS
                                    Part 2: Hoses, hose lines and connectors
955
      EN 500-4:2011                 Mobile road construction machinery - Safety - Part 4:         NC   59 218 MMFPS
956                                 Specific requirements for compaction machines
      EN 12629-1:2000+A1:2010       Machines for the manufacture of constructional products       NC   28 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 1:
957                                 Common requirements
      EN 12629-3:2002+A1:2010       Machines for the manufacture of constructional products       NC   21 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 3: Slide
958                                 and turntable machines
      EN 12629-5-1:2003+A1:2010     Machines for the manufacture of constructional products      NC    26 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 5-1: Pipe
                                    making machines manufacturing in the vertical axis
959
      EN 12629-5-2:2003+A1:2010     Machines for the manufacture of constructional products      NC    14 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 5-2: Pipe
                                    making machines manufacturing in the horizontal axis
960
      EN 12629-5-3:2003+A1:2010     Machines for the manufacture of constructional products      NC    16 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 5-3: Pipe
961                                 prestressing machines
      EN 12629-5-4:2003+A1:2010     Machines for the manufacture of constructional products       NC   14 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 5-4:
962                                 Concrete pipe coating machines
      EN 12629-6:2004+A1:2010       Machines for the manufacture of constructional products       NC   35 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 6:
                                    Stationary and mobile equipment for the manufacture of
963                                 precast reinforced products
      EN 12629-7:2004+A1:2010       Machines for the manufacture of constructional products   NC       88 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 7:
                                    Stationary and mobile equipment for long line manufacture
964                                 of prestressed products




                                              Pagina 66 din 346
      EN 12629-8:2002+A1:2010       Machines for the manufacture of constructional products       NC   17 218 MMFPS
                                    from concrete and calcium-silicate - Safety - Part 8:
                                    Machines and equipment for the manufacture of
                                    constructional products from calcium-silicate (and
965                                 concrete)
      EN ISO 4413:2010              Hydraulic fluid power - General rules and safety              NC   50 223 MMFPS
                                    requirements for systems and their components (ISO
966                                 4413:2010)
      EN ISO 4414:2010              Pneumatic fluid power - General rules and safety              NC   42 223 MMFPS
                                    requirements for systems and their components (ISO
967                                 4414:2010)
      EN ISO 12100:2010             Safety of machinery - General principles for design - Risk    NC   81 223 MMFPS
                                    assessment and risk reduction (ISO 12100:2010)
968
      EN 341:2011                   Personal fall protection equipment - Descender devices for NC      22 227 MMFPS
969                                 rescue
      EN ISO 12402-8:2006/A1:2011   Personal flotation devices - Part 8: Accessories - Safety  NC      7 227 MMFPS
                                    requirements and test methods - Amendment 1 (ISO
970                                 12402-8:2006/Amd 1:2011)
      EN ISO 12402-9:2006/A1:2011   Personal flotation devices - Part 9: Test methods -           NC   16 227 MMFPS
971                                 Amendment 1 (ISO 12402-9:2006/Amd 1:2011)
      EN ISO 12402-7:2006/A1:2011   Personal flotation devices - Part 7: Materials and            NC   24 227 MMFPS
                                    components - Safety requirements and test methods -
972                                 Amendment 1 (ISO 12402-7:2006/Amd 1:2011)
      EN ISO 13982-1:2004/A1:2010   Protective clothing for use against solid particulates - Part NC   4 227 MMFPS
                                    1: Performance requirements for chemical protective
                                    clothing providing protection to the full body against
                                    airborne solid particulates (type 5 clothing) - Amendment 1
                                    (ISO 13982-1:2004/Amd 1:2010)
973
      EN ISO 20349:2010             Personal protective equipment - Footwear protecting           NC   20 227 MMFPS
                                    against thermal risks and molten metal splashes as found
                                    in foundries and welding - Requirements and test method
974                                 (ISO 20349:2010)
      EN 1012-1:2010                Compressors and vacuum pumps - Safety requirements - NC            39 255 MMFPS
975                                 Part 1: Air compressors
      EN ISO 11148-3:2010           Hand-held non-electric power tools - Safety requirements - NC      31 255 MMFPS
                                    Part 3: Drills and tappers (ISO 11148-3:2010)
976
      EN ISO 11148-4:2010           Hand-held non-electric power tools - Safety requirements - NC      33 255 MMFPS
                                    Part 4: Non-rotary percussive power tools (ISO 11148-
977                                 4:2010)
      EN ISO 11148-6:2010           Hand-held non-electric power tools - Safety requirements - NC      36 255 MMFPS
                                    Part 6: Assembly power tools for threaded fasteners (ISO
978                                 11148-6:2010)
      EN 15895:2011                 Cartridge operated hand-held tools - Safety requirements - NC      48 255 MMFPS
979                                 Fixing and hard marking tools
      EN 60335-2-77:2010            Safety of household and similar appliances -- Part 2-77:   NC      80 255 MMFPS
                                    Particular requirements for pedestrian-controlled walk-
980                                 behind electrically powered lawn mowers
      EN 60745-1:2009/A11:2010      Hand-held motor-operated electric tools - Safety -- Part 1:   NC   3 255 MMFPS
981                                 General requirements
      EN 60745-2-1:2010             Hand-held motor-operated electric tools - Safety -- Part 2-   NC   29 255 MMFPS
                                    1: Particular requirements for drills and impact drills
982
      EN 60745-2-11:2010            Hand-held motor-operated electric tools - Safety -- Part 2-   NC   22 255 MMFPS
                                    11: Particular requirements for reciprocating saws (jig and
983                                 sabre saws)
      EN 60745-2-13:2009/A1:2010    Hand-held motor-operated electric tools - Safety -- Part 2-   NC   7 255 MMFPS
984                                 13: Particular requirements for chain saws
      EN 60745-2-14:2009/A2:2010    Hand-held motor-operated electric tools - Safety -- Part 2-   NC   8 255 MMFPS
985                                 14: Particular requirements for planers
      EN 60745-2-16:2010            Hand-held motor-operated electric tools - Safety -- Part 2-   NC   22 255 MMFPS
986                                 16: Particular requirements for tackers
      EN 60745-2-17:2010            Hand-held motor-operated electric tools - Safety -- Part 2-   NC   37 255 MMFPS
                                    17: Particular requirements for routers and trimmers
987
      EN 60745-2-19:2009/A1:2010    Hand-held motor-operated electric tools - Safety -- Part 2-   NC   5 255 MMFPS
988                                 19: Particular requirements for jointers
      EN 60745-2-2:2010             Hand-held motor-operated electric tools - Safety -- Part 2-   NC   22 255 MMFPS
                                    2: Particular requirements for screwdrivers and impact
989                                 wrenches



                                              Pagina 67 din 346
       EN 60745-2-21:2009/A1:2010   Hand-held motor-operated electric tools - Safety -- Part 2- NC      5 255 MMFPS
 990                                21: Particular requirements for drain cleaners
       EN 60745-2-3:2011            Hand-held motor-operated electric tools - Safety -- Part 2- NC      65 255 MMFPS
                                    3: Particular requirements for grinders, polishers and disk-
 991                                type sanders
       EN 60745-2-5:2010            Hand-held motor-operated electric tools - Safety -- Part 2-    NC   59 255 MMFPS
 992                                5: Particular requirements for circular saws
       EN 60745-2-6:2010            Hand-held motor-operated electric tools - Safety -- Part 2-    NC   40 255 MMFPS
 993                                6: Particular requirements for hammers
       EN 61029-1:2009/A11:2010     Safety of transportable motor-operated electric tools --       NC   3 255 MMFPS
 994                                Part 1: General requirements
       EN 61029-2-12:2011           Safety of transportable motor-operated electric tools --       NC   15 255 MMFPS
                                    Part 2-12: Particular requirements for threading machines
 995
       EN 61029-2-4:2011            Safety of transportable motor-operated electric tools --       NC   51 255 MMFPS
                                    Part 2-4: Particular requirements for bench grinders
 996
       EN 61029-2-6:2010            Safety of transportable motor-operated electric tools --       NC   15 255 MMFPS
                                    Part 2-6: Particular requirements for diamond drills with
 997                                water supply
       EN ISO 3741:2010             Acoustics - Determination of sound power levels and            NC   65 274 MMFPS
                                    sound energy levels of noise sources using sound
                                    pressure - Precision methods for reverberation test rooms
 998                                (ISO 3741:2010)
       EN ISO 3743-1:2010           Acoustics - Determination of sound power levels and            NC   40 274 MMFPS
                                    sound energy levels of noise sources using sound
                                    pressure - Engineering methods for small movable
                                    sources in reverberant fields - Part 1: Comparison method
                                    for a hard-walled test room (ISO 3743-1:2010)
 999
       EN ISO 3744:2010             Acoustics - Determination of sound power levels and            NC   81 274 MMFPS
                                    sound energy levels of noise sources using sound
                                    pressure - Engineering methods for an essentially free
                                    field over a reflecting plane (ISO 3744:2010)
1000
       EN ISO 3746:2010             Acoustics - Determination of sound power levels and            NC   52 274 MMFPS
                                    sound energy levels of noise sources using sound
                                    pressure - Survey method using an enveloping
                                    measurement surface over a reflecting plane (ISO
1001                                3746:2010)
       EN ISO 3747:2010             Acoustics - Determination of sound power levels and            NC   47 274 MMFPS
                                    sound energy levels of noise sources using sound
                                    pressure - Engineering/survey methods for use in situ in a
                                    reverberant environment (ISO 3747:2010)
1002
       EN ISO 7779:2010             Acoustics - Measurement of airborne noise emitted by           NC   65 274 MMFPS
                                    information technology and telecommunications
1003                                equipment (ISO 7779:2010)
       EN ISO 8253-1:2010           Acoustics - Audiometric test methods - Part 1: Pure-tone       NC   32 274 MMFPS
                                    air and bone conduction audiometry (ISO 8253-1:2010)
1004
       EN ISO 28927-10:2011         Hand-held portable power tools - Test methods for              NC   32 274 MMFPS
                                    evaluation of vibration emission - Part 10: Percussive
                                    drills, hammers and breakers (ISO 28927-10:2011)
1005
       EN ISO 28927-11:2011         Hand-held portable power tools - Test methods for         NC        21 274 MMFPS
                                    evaluation of vibration emission - Part 11: Stone hammers
1006                                (ISO 28927-11:2011)
       EN ISO 28927-4:2010          Hand-held portable power tools - Test methods for              NC   27 274 MMFPS
                                    evaluation of vibration emission - Part 4: Straight grinders
1007                                (ISO 28927-4:2010)
       EN 15947-1:2010              Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 -     NC   8 358 MMFPS
1008                                Part 1: Terminology
       EN 15947-2:2010              Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 -     NC   13 358 MMFPS
1009                                Part 2: Categories and types of firework
       EN 15947-3:2010              Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 -     NC   22 358 MMFPS
1010                                Part 3: Minimum labelling requirements
       EN 15947-4:2010              Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 -      NC   39 358 MMFPS
1011                                Part 4: Test methods
       EN 15947-5:2010              Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 -     NC   28 358 MMFPS
                                    Part 5: Requirements for construction and performance
1012



                                              Pagina 68 din 346
       EN 1113:2008+A1:2011   Sanitary tapware - Shower hoses for sanitary tapware for         NC   20   52 MMP
                              water supply systems of type 1 and type 2 - General
1013                          technical specification
       EN ISO 5667-23:2011    Water quality - Sampling - Part 23: Guidance on passive          NC   26   52 MMP
                              sampling in surface waters (ISO 5667-23:2011)
1014
       EN 15795:2010          Products used for treatment of water intended for human          NC   12   52 MMP
                              consumption - Natural unexpanded aluminosilicates
1015
       EN 15975-1:2011        Security of drinking water supply - Guidelines for risk and      NC   19   52 MMP
                              crisis management - Part 1: Crisis management
1016
       EN 1911:2010           Stationary source emissions - Determination of mass              NC   45   53 MMP
                              concentration of gaseous chlorides expressed as HCl -
1017                          Standard reference method
       EN 1948-4:2010         Stationary source emissions - Determination of the mass          NC   57   53 MMP
                              concentration of PCDDs/PCDFs and dioxin-like PCBs -
                              Part 4: Sampling and analysis of dioxin-like PCBs
1018
       EN ISO 11771:2010      Air quality - Determination of time-averaged mass                NC   27   53 MMP
                              emissions and emission factors - General approach (ISO
1019                          11771:2010)
       EN 15980:2011          Air quality - Determination of the deposition of                 NC   42   53 MMP
                              benz[a]anthracene, benzo[b]fluoranthene,
                              benzo[j]fluoranthene, benzo[k]fluoranthene,
                              benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-
1020                          cd]pyrene
       EN ISO 25139:2011      Stationary source emissions - Manual method for the              NC   21   53 MMP
                              determination of the methane concentration using gas
1021                          chromatography (ISO 25139:2011)
       EN ISO 25140:2010      Stationary source emissions - Automatic method for the           NC   34   53 MMP
                              determination of the methane concentration using flame
                              ionisation detection (FID) (ISO 25140:2010)
1022
       EN ISO 28439:2011      Workplace atmospheres - Characterization of ultrafine            NC   18   53 MMP
                              aerosols/nanoaerosols - Determination of the size
                              distribution and number concentration using differential
                              electrical mobility analysing systems (ISO 28439:2011)
1023
       EN ISO 5667-13:2011    Water quality - Sampling - Part 13: Guidance on sampling         NC   27 360 MMP
1024                          of sludges (ISO 5667-13:2011)
       EN 13965-2:2010        Characterization of waste - Terminology - Part 2:                NC   14 360 MMP
1025                          Management related terms and definitions
       EN 14588:2010          Solid biofuels - Terminology, definitions and descriptions       NC   42 360 MMP
1026
1027 EN 14778:2011            Solid biofuels - Sampling                                        NC   62 360 MMP
1028 EN 14780:2011            Solid biofuels - Sample preparation                              NC   24 360 MMP
       EN 14961-2:2011        Solid biofuels - Fuel specifications and classes - Part 2:       NC   13 360 MMP
1029                          Wood pellets for non-industrial use
       EN 14961-3:2011        Solid biofuels - Fuel specifications and classes - Part 3:       NC    9 360 MMP
1030                          Wood briquettes for non-industrial use
       EN 14961-4:2011        Solid biofuels - Fuel specifications and classes - Part 4:       NC   11 360 MMP
1031                          Wood chips for non-industrial use
       EN 14961-5:2011        Solid biofuels - Fuel specifications and classes - Part 5:       NC   12 360 MMP
1032                          Firewood for non-industrial use
       EN 15104:2011          Solid biofuels - Determination of total content of carbon,       NC   13 360 MMP
                              hydrogen and nitrogen - Instrumental methods
1033
       EN 15105:2011          Solid biofuels - Determination of the water soluble              NC   11 360 MMP
1034                          chloride, sodium and potassium content
       EN 15149-1:2010        Solid biofuels - Determination of particle size distribution -   NC   13 360 MMP
                              Part 1: Oscillating screen method using sieve apertures of
1035                          1 mm and above
       EN 15149-2:2010        Solid biofuels - Determination of particle size distribution -   NC   13 360 MMP
                              Part 2: Vibrating screen method using sieve apertures of
1036                          3,15 mm and below
       EN 15210-2:2010        Solid biofuels - Determination of mechanical durability of       NC    8 360 MMP
1037                          pellets and briquettes - Part 2: Briquettes
       EN 15234-1:2011        Solid biofuels - Fuel quality assurance - Part 1: General        NC   21 360 MMP
1038                          requirements




                                         Pagina 69 din 346
       EN 15289:2011                 Solid biofuels - Determination of total content of sulfur and   NC   15 360 MMP
1039                                 chlorine
       EN 15290:2011                 Solid biofuels - Determination of major elements - Al, Ca,      NC   17 360 MMP
1040                                 Fe, Mg, P, K, Si, Na and Ti
       EN 15296:2011                 Solid biofuels - Conversion of analytical results from one      NC   14 360 MMP
1041                                 basis to another
       EN 15297:2011                 Solid biofuels - Determination of minor elements - As, Cd,      NC   15 360 MMP
1042                                 Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn
       EN 15357:2011                 Solid recovered fuels - Terminology, definitions and            NC   23 360 MMP
1043                                 descriptions
       EN 15358:2011                 Solid recovered fuels - Quality management systems -            NC   40 360 MMP
                                     Particular requirements for their application to the
1044                                 production of solid recovered fuels
       EN 15400:2011                 Solid recovered fuels - Determination of calorific value        NC   58 360 MMP
1045
       EN 15402:2011                 Solid recovered fuels - Determination of the content of         NC   15 360 MMP
1046                                 volatile matter
1047 EN 15403:2011                   Solid recovered fuels - Determination of ash content            NC   11 360 MMP
     EN 15407:2011                   Solid recovered fuels - Methods for the determination of        NC   14 360 MMP
                                     carbon (C), hydrogen (H) and nitrogen (N) content
1048
       EN 15408:2011                 Solid recovered fuels - Methods for the determination of        NC   18 360 MMP
                                     sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br)
1049                                 content
       EN 15414-3:2011               Solid recovered fuels - Determination of moisture content       NC   10 360 MMP
                                     using the oven dry method - Part 3: Moisture in general
1050                                 analysis sample
       EN 15440:2011                 Solid recovered fuels - Methods for the determination of        NC   57 360 MMP
1051                                 biomass content
1052 EN 15442:2011                   Solid recovered fuels - Methods for sampling                    NC   73 360 MMP
     EN 15443:2011                   Solid recovered fuels - Methods for the preparation of the      NC   37 360 MMP
1053                                 laboratory sample
     EN 60601-1-11:2010              Medical electrical equipment -- Part 1-11: General              NC   64   22 MS
                                     requirements for basic safety and essential performance -
                                     Collateral standard: Requirements for medical electrical
                                     equipment and medical electrical systems used in the
1054                                 home healthcare environment
       EN 60601-2-43:2010            Medical electrical equipment -- Part 2-43: Particular           NC   58   22 MS
                                     requirements for basic safety and essential performance
                                     of X-ray equipment for interventional procedures
1055
       EN 60601-2-45:2011            Medical electrical equipment -- Part 2-45: Particular           NC   57   22 MS
                                     requirements for the basic safety and essential
                                     performance of mammographic X-ray equipment and
1056                                 mammographic stereotactic devices
       EN 60601-2-52:2010/AC:2011    Medical electrical equipment - Part 2-52: Particular            ER    2   22 MS
                                     requirements for basic safety and essential performance
1057                                 of medical beds (IEC 60601-2-52:2009)
       EN 62464-2:2011               Magnetic resonance equipment for medical imaging -- Part NC          16   22 MS
1058                                 2: Classification criteria for pulse sequences
       EN 80001-1:2011               Application of risk management for IT-networks           NC          45   22 MS
                                     incorporating medical devices -- Part 1: Roles,
1059                                 responsibilities and activities
       EN 80601-2-30:2010            Medical electrical equipment -- Part 2-30: Particular           NC   60   22 MS
                                     requirements for the basic safety and essential
                                     performance of automated non-invasive
1060                                 sphygmomanometers
       EN 60601-2-57:2011            Medical electrical equipment -- Part 2-57: Particular           NC   40   38 MS
                                     requirements for the basic safety and essential
                                     performance of non-laser light source equipment intended
                                     for therapeutic, diagnostic, monitoring and
1061                                 cosmetic/aesthetic use
       EN ISO 11979-8:2009/A1:2011   Ophthalmic implants - Intraocular lenses - Part 8:              NC    5 230 MS
                                     Fundamental requirements - Amendment 1 (ISO 11979-
1062                                 8:2006/Amd 1:2011)
       EN ISO 14534:2011             Ophthalmic optics - Contact lenses and contact lens care        NC   13 230 MS
                                     products - Fundamental requirements (ISO 14534:2011)
1063




                                               Pagina 70 din 346
       EN 50383:2010                Basic standard for the calculation and measurement of    NC        79 279 MS
                                    electromagnetic field strength and SAR related to human
                                    exposure from radio base stations and fixed terminal
                                    stations for wireless telecommunication systems (110 MHz
1064                                - 40 GHz)
       EN 62209-2:2010              Human exposure to radio frequency fields from hand-held NC         119 279 MS
                                    and body-mounted wireless communication devices -
                                    Human models, instrumentation, and procedures -- Part 2:
                                    Procedure to determine the specific absorption rate (SAR)
                                    for wireless communication devices used in close
                                    proximity to the human body (frequency range of 30 MHz
                                    to 6 GHz)
1065
       EN 1811:2011                 Reference test method for release of nickel from all post     NC   27 377 MS
                                    assemblies which are inserted into pierced parts of the
                                    human body and articles intended to come into direct and
1066                                prolonged contact with the skin
       EN 1865-1:2010               Patient handling equipment used in road ambulances -          NC   32 377 MS
                                    Part 1: General stretcher systems and patient handling
1067                                equipment
       EN 1865-2:2010               Patient handling equipment used in road ambulances -          NC   11 377 MS
1068                                Part 2: Power assisted stretcher
       EN ISO 1942:2010             Dentistry - Vocabulary (ISO 1942:2009, Corrected version      NC   83 377 MS
1069                                2010-03-01)
       EN ISO 3107:2011             Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-    NC   13 377 MS
1070                                eugenol cements (ISO 3107:2011)
       EN ISO 5364:2011             Anaesthetic and respiratory equipment - Oropharyngeal         NC   14 377 MS
1071                                airways (ISO 5364:2008)
1072 EN ISO 6875:2011               Dentistry - Patient chair (ISO 6875:2011)                     NC   11 377 MS
     EN ISO 7439:2011               Copper-bearing contraceptive intrauterine devices -           NC   14 377 MS
1073                                Requirements and tests (ISO 7439:2011)
     EN ISO 8362-1:2009             Injection containers and accessories - Part 1: Injection      NC    8 377 MS
                                    vials made of glass tubing (ISO 8362-1:2009)
1074
       EN ISO 8362-6:2011           Injection containers and accessories - Part 6: Caps made      NC    6 377 MS
                                    of aluminium-plastics combinations for injection vials (ISO
1075                                8362-6:2010)
       EN ISO 8362-7:2010           Injection containers and accessories - Part 7: Injection      NC    7 377 MS
                                    caps made of aluminium-plastics combinations without
                                    overlapping plastics part (ISO 8362-7:2006)
1076
       EN ISO 8536-4:2010           Infusion equipment for medical use - Part 4: Infusion sets    NC   22 377 MS
1077                                for single use, gravity feed (ISO 8536-4:2010)
       EN ISO 8835-3:2009/A1:2010   Inhalational anaesthesia systems - Part 3: Transfer and       NC    6 377 MS
                                    receiving systems of active anaesthetic gas scavenging
1078                                systems (ISO 8835-3:2007/AMD 1:2010)
       EN ISO 9187-1:2010           Injection equipment for medical use - Part 1: Ampoules for NC      12 377 MS
1079                                injectables (ISO 9187-1:2010)
       EN ISO 9187-2:2010           Injection equipment for medical use - Part 2: One-point-cut NC      7 377 MS
1080                                (OPC) ampoules (ISO 9187-2:2010)
1081 EN ISO 10873:2010              Dentistry - Denture adhesives (ISO 10873:2010)              NC     18 377 MS
     EN ISO 10993-10:2010           Biological evaluation of medical devices - Part 10: Tests     NC   70 377 MS
                                    for irritation and skin sensitization (ISO 10993-10:2010)
1082
       EN ISO 13408-1:2011          Aseptic processing of health care products - Part 1:          NC   51 377 MS
1083                                General requirements (ISO 13408-1:2008)
       EN ISO 13408-2:2011          Aseptic processing of health care products - Part 2:          NC   17 377 MS
1084                                Filtration (ISO 13408-2:2003)
       EN ISO 13408-3:2011          Aseptic processing of health care products - Part 3:          NC   17 377 MS
1085                                Lyophilization (ISO 13408-3:2006)
       EN ISO 13408-4:2011          Aseptic processing of health care products - Part 4: Clean-   NC   20 377 MS
1086                                in-place technologies (ISO 13408-4:2005)
       EN ISO 13408-5:2011          Aseptic processing of health care products - Part 5:          NC   20 377 MS
1087                                Sterilization in place (ISO 13408-5:2006)
       EN ISO 13408-6:2011          Aseptic processing of health care products - Part 6:          NC   20 377 MS
1088                                Isolator systems (ISO 13408-6:2005)




                                              Pagina 71 din 346
       EN 13795:2011                 Surgical drapes, gowns and clean air suits, used as             NC   22 377 MS
                                     medical devices for patients, clinical staff and equipment -
                                     General requirements for manufacturers, processors and
                                     products, test methods, performance requirements and
                                     performance levels
1089
       EN 13976-1:2011               Rescue systems - Transportation of incubators - Part 1:         NC   12 377 MS
1090                                 Interface conditions
       EN 13976-2:2011               Rescue systems - Transportation of incubators - Part 2:         NC   11 377 MS
1091                                 System requirements
       EN ISO 14155:2011             Clinical investigation of medical devices for human             NC   63 377 MS
1092                                 subjects - Good clinical practice (ISO 14155:2011)
       EN ISO 15883-6:2011           Washer-disinfectors - Part 6: Requirements and tests for        NC   12 377 MS
                                     washer-disinfectors employing thermal disinfection for non-
                                     invasive, non-critical medical devices and healthcare
                                     equipment (ISO 15883-6:2011)
1093
       EN 15908:2010                 Anaesthetic and respiratory equipment - Non-                    NC   18 377 MS
                                     interchangeable screw-threaded (NIST) low-pressure
1094                                 connectors for medical gases
       EN 15964:2011                 Breath alcohol test devices other than single use devices -     NC   31 377 MS
1095                                 Requirements and test methods
       EN ISO 20072:2010             Aerosol drug delivery device design verification -              NC   48 377 MS
1096                                 Requirements and test methods (ISO 20072:2009)
       EN ISO 21671:2006/A1:2011     Dentistry - Rotary polishers - Amendment 1 (ISO                 NC    5 377 MS
1097                                 21671:2006/Amd 1:2011)
       EN ISO 22413:2011             Transfer sets for pharmaceutical preparations -                 NC   18 377 MS
1098                                 Requirements and test methods (ISO 22413:2010)
       EN ISO 23908:2011             Sharps injury protection - Requirements and test methods -      NC   16 377 MS
                                      Sharps protection features for single-use hypodermic
                                     needles, introducers for catheters and needles used for
1099                                 blood sampling (ISO 23908:2011)
       EN ISO 25424:2011             Sterilization of medical devices - Low temperature steam        NC   43 377 MS
                                     and formaldehyde - Requirements for development,
                                     validation and routine control of a sterilization process for
                                     medical devices (ISO 25424:2009)
1100
       EN ISO 25539-1:2009/AC:2011   Cardiovascular implants - Endovascular devices - Part 1:        ER    3 377 MS
                                     Endovascular prostheses (ISO 25539-1:2003 including
1101                                 Amd 1:2005)
       EN ISO 25539-2:2009/AC:2011   Cardiovascular implants - Endovascular devices - Part 2:        ER    3 377 MS
1102                                 Vascular stents (ISO 25539-2:2008)
       EN ISO 28399:2011             Dentistry - Products for external tooth bleaching (ISO          NC   16 377 MS
1103                                 28399:2011)
       EN ISO 80369-1:2010           Small bore connectors for liquids and gases in healthcare       NC   20 377 MS
                                     applications - Part 1: General requirements (ISO 80369-
1104                                 1:2010)
       EN ISO 80601-2-12:2011        Medical electrical equipment - Part 2-12: Particular            NC   83 377 MS
                                     requirements for basic safety and essential performance
                                     of critical care ventilators (ISO 80601-2-12:2011)
1105
       EN ISO 80601-2-61:2011        Medical electrical equipment - Part 2-61: Particular            NC   86 377 MS
                                     requirements for basic safety and essential performance
                                     of pulse oximeter equipment (ISO 80601-2-61:2011)
1106
       EN 50122-1:2011               Railway applications - Fixed installations - Electrical         NC   81   4 MTI
                                     safety, earthing and the return circuit -- Part 1: Protective
1107                                 provisions against electric shock
       EN 50159:2010                 Railway applications - Communication, signalling and            NC   64   4 MTI
                                     processing systems - Safety-related communication in
1108                                 transmission systems
       EN 50329:2003/A1:2010         Railway applications - Fixed installations - Traction           NC   11   4 MTI
1109                                 transformers
       EN 60349-1:2010               Electric traction - Rotating electrical machines for rail and   NC   69   4 MTI
                                     road vehicles -- Part 1: Machines other than electronic
1110                                 converter-fed alternating current motors
       EN 60349-2:2010               Electric traction - Rotating electrical machines for rail and NC     41   4 MTI
                                     road vehicles -- Part 2: Electronic converter-fed alternating
1111                                 current motors
       EN 61881-1:2011               Railway applications - Rolling stock equipment -                NC   49   4 MTI
                                     Capacitors for power electronics -- Part 1: Paper/plastic
1112                                 film capacitors



                                                Pagina 72 din 346
       EN 2133:2010           Aerospace series - Cadmium plating of steels with             NC   10   72 MTI
                              specified tensile strength ? 1 450 MPa, copper, copper
1113                          alloys and nickel alloys
       EN 2481:2010           Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1           NC    8   72 MTI
                              250 MPa ? Rm ? 1 400 MPa - Forgings - De ? 75 mm
1114
       EN 2482:2010           Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1           NC    8   72 MTI
1115                          100 MPa ? Rm ? 1 300 MPa - Bars - De ? 100 mm
       EN 2483:2010           Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1           NC    7   72 MTI
                              100 MPa ? Rm ? 1 300 MPa - Forgings - De ? 100 mm
1116
       EN 2825:2011           Aerospace series - Burning behaviour of non metallic         NC     9   72 MTI
                              materials under the influence of radiating heat and flames -
1117                          Determination of smoke density
       EN 2826:2011           Aerospace series - Burning behaviour of non metallic         NC    10   72 MTI
                              materials under the influence of radiating heat and flames -
                              Determination of gas components in the smoke
1118
       EN 3238:2010           Aerospace series - Metallic materials - Test method -         NC   10   72 MTI
1119                          Shear test for wires and rivets
       EN 3274:2010           Aerospace series - Pipe coupling 8°30' - Thread end -         NC   11   72 MTI
1120                          Geometric configuration
       EN 3687:2010           Aerospace series - Bolts, normal hexagon head, relieved       NC   11   72 MTI
                              shank, long thread, in heat resisting steel FE-PA92HT
                              (A286), silver plated - Classification: 1 100 MPa/650 °C
1121
       EN 3777:2010           Aerospace series - Pins, quick release, single and double     NC   17   72 MTI
1122                          acting - Technical specification
       EN 3843:2010           Aerospace series - Nuts, bihexagonal, self-locking, with      NC    6   72 MTI
                              counterbore, in heat resisting steel, passivated -
                              Classification: 1 100 MPa (at ambient temperature) / 650
1123                          °C
       EN 3873:2010           Aerospace series - Test methods for metallic materials -      NC   33   72 MTI
                              Determination of fatigue crack growth rates using Corner-
1124                          Cracked (CC) test pieces
       EN 3911:2010           Aerospace series - Six lobe recess - Geometrical definition NC      5   72 MTI
1125
       EN 4023:2010           Aerospace series - Pipe coupling 8°30' in titanium alloy -    NC    6   72 MTI
1126                          Elbows 45°
       EN 4025:2010           Aerospace series - Pipe coupling 8°30' in titanium alloy -    NC    7   72 MTI
1127                          Elbows 45°, bulkhead
       EN 4136:2009/AC:2010   Aerospace series - Bolts, normal bi-hexagonal head,           NC    3   72 MTI
                              coarse tolerance normal shank, long thread, in alloy steel,
                              cadmium plated - Classification: 1 100 MPa (at ambient
1128                          temperature) / 235 °C
       EN 4473:2010           Aerospace series - Aluminium pigmented coatings for           NC   16   72 MTI
1129                          fasteners - Technical specification
       EN 4538-003:2010       Aerospace series - Bearings, spherical plain, in corrosion    NC   11   72 MTI
                              resisting steel with self-lubricating liner elevated load
                              under low oscillations - Narrow series - Dimensions and
                              loads - Part 003: Inch series with low friction coefficient
1130
       EN 4539-003:2010       Aerospace series - Bearings, spherical plain, in corrosion    NC   11   72 MTI
                              resisting steel with self-lubricating liner elevated load
                              under low oscillations - Wide series - Dimensions and
                              loads - Part 003: Inch series with low friction coefficient
1131
       EN 4660-001:2011       Aerospace series - Modular and Open Avionics                  NC   21   72 MTI
1132                          Architectures - Part 001: Architecture
       EN 4660-002:2011       Aerospace series - Modular and Open Avionics                  NC   39   72 MTI
                              Architectures - Part 002: Common Functional Modules
1133
       EN 4660-003:2011       Aerospace series - Modular and Open Avionics                  NC   20   72 MTI
1134                          Architectures - Part 003: Communications/Network
       EN 4660-004:2011       Aerospace series - Modular and Open Avionics                  NC   42   72 MTI
1135                          Architectures - Part 004: Packaging
       EN 4673-001:2010       Aerospace series - Inserts, UNJ threads, self-locking, with   NC   12   72 MTI
                              self-broaching keys - Part 001: Installation and removal
1136                          procedure
       EN 4673-002:2010       Aerospace series - Inserts, UNJ threads, self-locking, with   NC   11   72 MTI
                              self-broaching keys - Part 002: Design standard
1137



                                        Pagina 73 din 346
       EN 4673-003:2010          Aerospace series - Inserts, UNJ threads, self-locking, with   NC   25   72 MTI
                                 self-broaching keys - Part 003: Technical specification
1138
       EN 4673-004:2010          Aerospace series - Inserts, UNJ threads, self-locking, with   NC    8   72 MTI
                                 self-broaching keys - Part 004: In heat resisting nickel
                                 base alloy NI-P100HT (Inconel 718), silver plating
1139
       EN 4673-005:2010          Aerospace series - Inserts, UNJ threads, self-locking, with   NC    8   72 MTI
                                 self-broaching keys - Part 005: In heat resisting nickel
                                 base alloy NI-P101HT (WASPALOY), silver plating
1140
       EN 4673-006:2010          Aerospace series - Inserts, UNJ threads, self-locking, with   NC    8   72 MTI
                                 self-broaching keys - Part 006: In heat resisting steel FE-
1141                             PA2601 (A286), MoS2 coated
       EN 4700-004:2010          Aerospace series - Steel and heat resisting alloys -        NC     29   72 MTI
                                 Wrought products - Technical specification - Part 004: Wire
1142
       EN 4700-007:2010          Aerospace series - Steel and heat resisting alloys -          NC   21   72 MTI
                                 Wrought products - Technical specification - Part 007:
1143                             Remelting stock
       EN 4800-001:2010          Aerospace series - Titanium and titanium alloys -             NC   28   72 MTI
                                 Technical specification - Part 001: Plate, sheet and strip
1144
       EN 4800-002:2010          Aerospace series - Titanium and titanium alloys -             NC   27   72 MTI
1145                             Technical specification - Part 002: Bar and section
       EN 4800-003:2010          Aerospace series - Titanium and titanium alloys -             NC   28   72 MTI
1146                             Technical specification - Part 003: Tube
       EN 4800-004:2010          Aerospace series - Titanium and titanium alloys -             NC   27   72 MTI
1147                             Technical specification - Part 004: Wire
       EN 4800-005:2010          Aerospace series - Titanium and titanium alloys -             NC   26   72 MTI
1148                             Technical specification - Part 005: Forging stock
       EN 4800-006:2010          Aerospace series - Titanium and titanium alloys -             NC   26   72 MTI
                                 Technical specification - Part 006: Pre-production and
1149                             production forgings
       EN 4800-007:2010          Aerospace series - Titanium and titanium alloys -             NC   22   72 MTI
1150                             Technical specification - Part 007: Remelting stock
       EN 4800-008:2010          Aerospace series - Titanium and titanium alloys -             NC   22   72 MTI
                                 Technical specification - Part 008: Pre-production and
1151                             production castings
       EN 61108-3:2010           Maritime navigation and radiocommunication equipment       NC      63 143 MTI
                                 and systems - Global navigation satellite systems (GNSS) -
                                 - Part 3: Galileo receiver equipment - Performance
                                 requirements, methods of testing and required test results
1152
       EN 61162-1:2011           Maritime navigation and radiocommunication equipment          NC   154 143 MTI
                                 and systems - Digital interfaces -- Part 1: Single talker and
1153                             multiple listeners
       EN 61162-3:2008/A1:2010   Maritime navigation and radiocommunication equipment          NC    5 143 MTI
                                 and systems - Digital interfaces -- Part 3: Serial data
1154                             instrument network
       EN 62287-1:2011           Maritime navigation and radiocommunication equipment      NC       97 143 MTI
                                 and systems - Class B shipborne equipment of the
                                 automatic identification system (AIS) -- Part 1: Carrier-
                                 sense time division multiple access (CSTDMA) techniques
1155
       EN 62376:2011             Maritime navigation and radiocommunication equipment      NC       38 143 MTI
                                 and systems - Electronic chart system (ECS) - Operational
                                 and performance requirements, methods of testing and
1156                             required test results
1157 EN 12080:2007+A1:2010       Railway applications - Axleboxes - Rolling bearings           NC   37 146 MTI
     EN 12081:2007+A1:2010       Railway applications - Axleboxes - Lubricating greases        NC   16 146 MTI
1158
     EN 12082:2007+A1:2010       Railway applications - Axleboxes - Performance testing        NC   30 146 MTI
1159
     EN 12561-1:2011             Railway applications - Tank wagons - Part 1: Identification NC     15 146 MTI
                                 plates for tank wagons for the carriage of dangerous goods
1160
       EN 12561-2:2011           Railway applications - Tank wagons - Part 2: Bottom           NC   12 146 MTI
                                 emptying devices for liquid products including vapour
1161                             return




                                           Pagina 74 din 346
       EN 12561-3:2011           Railway applications - Tank wagons - Part 3: Bottom filling NC       14 146 MTI
                                 and emptying devices for gases liquefied under pressure
1162
       EN 12561-4:2011           Railway applications - Tank wagons - Part 4: Devices for        NC    9 146 MTI
1163                             top filling and emptying of liquid products
       EN 12561-5:2011           Railway applications - Tank wagons - Part 5: Devices for        NC    7 146 MTI
                                 vapour return while filling or emptying of liquid products
1164
       EN 12561-6:2011           Railway applications - Tank wagons - Part 6: Manholes           NC   14 146 MTI
1165
       EN 12561-7:2011           Railway applications - Tank wagons - Part 7: Platforms          NC   12 146 MTI
1166                             and ladders
       EN 12561-8:2011           Railway applications - Tank wagons - Part 8: Heating            NC    8 146 MTI
1167                             connections
       EN 13103:2009+A1:2010     Railway applications - Wheelsets and bogies - Non-              NC   45 146 MTI
1168                             powered axles - Design method
       EN 13104:2009+A1:2010     Railway applications - Wheelsets and bogies - Powered           NC   44 146 MTI
1169                             axles - Design method
       EN 13260:2009+A1:2010     Railway applications - Wheelsets and bogies - Wheelsets -       NC   37 146 MTI
1170                              Product requirements
       EN 13261:2009+A1:2010     Railway applications - Wheelsets and bogies - Axles -           NC   57 146 MTI
1171                             Product requirements
       EN 13262:2004+A2:2011     Railway applications - Wheelsets and bogies - Wheels -          NC   48 146 MTI
1172                             Product requirements
       EN 13674-1:2011           Railway applications - Track - Rail - Part 1: Vignole railway   NC   108 146 MTI
1173                             rails 46 kg/m and above
       EN 13674-2:2006+A1:2010   Railway applications - Track - Rail - Part 2: Switch and        NC   110 146 MTI
                                 crossing rails used in conjunction with Vignole railway rails
1174                             46 kg/m and above
       EN 13674-3:2006+A1:2010   Railway applications - Track - Rail - Part 3: Check rails       NC   23 146 MTI
1175
       EN 13715:2006+A1:2010     Railway applications - Wheelsets and bogies - Wheels -          NC   28 146 MTI
1176                             Tread profile
       EN 13749:2011             Railway applications - Wheelsets and bogies - Method of         NC   53 146 MTI
                                 specifying the structural requirements of bogie frames
1177
       EN 13979-1:2003+A2:2011   Railway applications - Wheelsets and bogies - Monobloc          NC   50 146 MTI
                                 wheels - Technical approval procedure - Part 1: Forged
1178                             and rolled wheels
       EN 14033-1:2011           Railway applications - Track - Railbound construction and       NC   73 146 MTI
                                 maintenance machines - Part 1: Technical requirements
1179                             for running
       EN 14067-5:2006+A1:2010   Railway applications - Aerodynamics - Part 5:                   NC   35 146 MTI
                                 Requirements and test procedures for aerodynamics in
1180                             tunnels
       EN 14535-1:2005+A1:2011   Railway applications - Brake discs for railway rolling stock - NC    29 146 MTI
                                  Part 1: Brake discs pressed or shrunk onto the axle or
                                 drive shaft, dimensions and quality requirements
1181
       EN 14535-2:2011           Railway applications - Brake discs for railway rolling stock - NC    27 146 MTI
                                 Part 2: Brake discs mounted onto the wheel, dimensions
1182                             and quality requirements
       EN 14601:2005+A1:2010     Railway applications - Straight and angled end cocks for        NC   36 146 MTI
1183                             brake pipe and main reservoir pipe
       EN 14730-1:2006+A1:2010   Railway applications - Track - Aluminothermic welding of        NC   51 146 MTI
                                 rails - Part 1: Approval of welding processes
1184
       EN 14813-1:2006+A1:2010   Railway applications - Air conditioning for driving cabs -      NC   24 146 MTI
1185                             Part 1: Comfort parameters
       EN 14813-2:2006+A1:2010   Railway applications - Air conditioning for driving cabs -      NC   28 146 MTI
1186                             Part 2: Type tests
       EN 14865-1:2009+A1:2010   Railway applications - Axlebox lubricating greases - Part 1:    NC   21 146 MTI
1187                             Method to test the ability to lubricate
       EN 14865-2:2006+A2:2010   Railway applications - Axlebox lubricating greases - Part 2:    NC   20 146 MTI
                                 Method to test the mechanical stability to cover vehicle
1188                             speeds up to 200 km/h
       EN 15020:2006+A1:2010     Railway applications - Rescue coupler - Performance        NC        26 146 MTI
                                 requirements, specific interface geometry and test methods
1189
       EN 15220-1:2008+A1:2011   Railway applications - Brake indicators - Part 1:               NC   33 146 MTI
1190                             Pneumatically operated brake indicators




                                           Pagina 75 din 346
       EN 15227:2008+A1:2010   Railway applications - Crashworthiness requirements for    NC     39 146 MTI
1191                           railway vehicle bodies
       EN 15302:2008+A1:2010   Railway applications - Method for determining the          NC     124 146 MTI
1192                           equivalent conicity
       EN 15355:2008+A1:2010   Railway applications - Braking - Distributor valves and    NC     65 146 MTI
1193                           distributor-isolating devices
       EN 15427:2008+A1:2010   Railway applications - Wheel/rail friction management -    NC     29 146 MTI
1194                           Flange lubrication
       EN 15461:2008+A1:2010   Railway applications - Noise emission - Characterisation   NC     18 146 MTI
                               of the dynamic properties of track sections for pass by
1195                           noise measurements
1196 EN 15551:2009+A1:2010     Railway applications - Railway rolling stock - Buffers     NC     72 146 MTI
     EN 15566:2009+A1:2010     Railway applications - Railway rolling stock - Draw gear   NC     68 146 MTI
1197                           and screw coupling
     EN 15595:2009+A1:2011     Railway applications - Braking - Wheel slide protection    NC     68 146 MTI
1198
1199 EN 15611:2008+A1:2010     Railway applications - Braking - Relay valves              NC     58 146 MTI
       EN 15612:2008+A1:2010   Railway applications - Braking - Brake pipe accelerator    NC     28 146 MTI
1200                           valve
       EN 15624:2008+A1:2010   Railway applications - Braking - Empty-loaded changeover   NC     32 146 MTI
1201                           devices
       EN 15625:2008+A1:2010   Railway applications - Braking - Automatic variable load   NC     31 146 MTI
1202                           sensing devices
       EN 15734-1:2010         Railway applications - Braking systems of high speed       NC     52 146 MTI
1203                           trains - Part 1: Requirements and definitions
       EN 15734-2:2010         Railway applications - Braking systems of high speed       NC     64 146 MTI
1204                           trains - Part 2: Test methods
1205 EN 15806:2010             Railway applications - Braking - Static brake testing      NC     25 146 MTI
1206 EN 15807:2011             Railway applications - Pneumatic half couplings            NC     50 146 MTI
       EN 15827:2011           Railway applications - Requirements for bogies and      NC        80 146 MTI
1207                           running gears
       EN 15892:2011           Railway applications - Noise Emission - Measurement of  NC        15 146 MTI
1208                           noise inside driver's cabs
       EN ISO 6185-4:2011      Inflatable boats - Part 4: Boats with a hull length of  NC        32 199 MTI
                               between 8 m and 24 m with a motor power rating of 15 kW
1209                           and greater (ISO 6185-4:2011)
       EN 12665:2011           Light and lighting - Basic terms and criteria for specifying NC   48 240 MTI
1210                           lighting requirements
       EN 2434-001:2010        Aerospace series - Paints and varnishes - Two component NC         9 296 MTI
                               cold curing polyurethane finish - Part 001: Basic
1211                           requirements
       EN 2434-002:2010        Aerospace series - Paints and varnishes - Two component NC         9 296 MTI
                               cold curing polyurethane finish - Part 002: High chemical
1212                           resistance
       EN 2434-003:2010        Aerospace series - Paints and varnishes - Two component NC        10 296 MTI
                               cold curing polyurethane finish - Part 003: Flexible and
1213                           high fluid resistance for interior
       EN 2434-004:2010        Aerospace series - Paints and varnishes - Two component NC         9 296 MTI
                               cold curing polyurethane finish - Part 004: High flexibility
1214
       EN 4700-001:2010        Aerospace series - Steel and heat resisting alloys -       NC     27 296 MTI
                               Wrought products - Technical specification - Part 001:
1215                           Plate, sheet and strip
       EN 4700-002:2010        Aerospace series - Steel and heat resisting alloys -       NC     31 296 MTI
                               Wrought products - Technical specification - Part 002: Bar
1216                           and section
       EN 4700-003:2010        Aerospace series - Steel and heat resisting alloys -       NC     27 296 MTI
                               Wrought products - Technical specification - Part 003:
1217                           Tube
       EN 4700-005:2010        Aerospace series - Steel and heat resisting alloys -       NC     22 296 MTI
                               Wrought products - Technical specification - Part 005:
1218                           Forging stock
       EN 4700-006:2010        Aerospace series - Steel and heat resisting alloys -        NC    28 296 MTI
                               Wrought products - Technical specification - Part 006: Pre-
1219                           production and production forgings
       EN 2240-051:2011        Aerospace series - Lamps, incandescent - Part 051:         NC      6 303 MTI
1220                           Lamp, code 1163 - Product standard
       EN 2240-052:2011        Aerospace series - Lamps, incandescent - Part 052:         NC      6 303 MTI
1221                           Lamp, code 1222 - Product standard
       EN 2240-053:2011        Aerospace series - Lamps, incandescent - Part 053:         NC      6 303 MTI
1222                           Lamp, code 1308 - Product standard




                                         Pagina 76 din 346
       EN 2240-054:2011   Aerospace series - Lamps, incandescent - Part 054:              NC    6 303 MTI
1223                      Lamp, code 1317 - Product standard
       EN 2240-055:2011   Aerospace series - Lamps, incandescent - Part 055:              NC    6 303 MTI
1224                      Lamp, code 1495 - Product standard
       EN 2240-056:2011   Aerospace series - Lamps, incandescent - Part 056:              NC    6 303 MTI
1225                      Lamp, code 1506 - Product standard
       EN 2240-057:2011   Aerospace series - Lamps, incandescent - Part 057:              NC    6 303 MTI
1226                      Lamp, code 1512 - Product standard
       EN 2240-058:2011   Aerospace series - Lamps, incandescent - Part 058:              NC    6 303 MTI
1227                      Lamp, code 1524 - Product standard
       EN 2240-059:2011   Aerospace series - Lamps, incandescent - Part 059:              NC    6 303 MTI
1228                      Lamp, code 1591 - Product standard
       EN 2240-060:2011   Aerospace series - Lamps, incandescent - Part 060:              NC    6 303 MTI
1229                      Lamp, code 1619 - Product standard
       EN 2240-061:2011   Aerospace series - Lamps, incandescent - Part 061:              NC    6 303 MTI
1230                      Lamp, code 1683 - Product standard
       EN 2240-062:2011   Aerospace series - Lamps, incandescent - Part 062:              NC    6 303 MTI
1231                      Lamp, code 1810 - Product standard
       EN 2240-063:2011   Aerospace series - Lamps, incandescent - Part 063:              NC    6 303 MTI
1232                      Lamp, code 1815 - Product standard
       EN 2240-064:2011   Aerospace series - Lamps, incandescent - Part 064:              NC    6 303 MTI
1233                      Lamp, code 1819 - Product standard
       EN 2240-065:2011   Aerospace series - Lamps, incandescent - Part 065:              NC    6 303 MTI
1234                      Lamp, code 1820 - Product standard
       EN 2240-066:2011   Aerospace series - Lamps, incandescent - Part 066:              NC    6 303 MTI
1235                      Lamp, code 1829 - Product standard
       EN 2240-067:2011   Aerospace series - Lamps, incandescent - Part 067:              NC    6 303 MTI
1236                      Lamp, code 1843 - Product standard
       EN 2240-068:2011   Aerospace series - Lamps, incandescent - Part 068:              NC    6 303 MTI
1237                      Lamp, code 1864 - Product standard
       EN 2240-069:2011   Aerospace series - Lamps, incandescent - Part 069:              NC    6 303 MTI
1238                      Lamp, code 1978 - Product standard
       EN 2240-070:2011   Aerospace series - Lamps, incandescent - Part 070:              NC    6 303 MTI
1239                      Lamp, code 2232 - Product standard
1240 EN 2283:2010         Aerospace series - Testing of aircraft wiring                   NC    9 303 MTI
     EN 2491:2011         Aerospace series - Molybdenum disulphide dry lubricants - NC          9 303 MTI
1241                      Coating methods
1242 EN 2535:2011         Aerospace series - Vacuum deposition of cadmium           NC         12 303 MTI
       EN 2757:2011       Aerospace series - Structural adhesives system - Test           NC    6 303 MTI
                          method - Determination of the drying and ignition residues
1243                      of primers
       EN 2997-001:2011   Aerospace series - Connectors, electrical, circular,            NC   74 303 MTI
                          coupled by threaded ring, fire-resistant or non fire-
                          resistant, operating temperatures – 65 °C to 175 °C
                          continuous, 200 °C continuous, 260 °C peak - Part 001:
1244                      Technical specification
       EN 2997-015:2011   Aerospace series - Connectors, electrical, circular,            NC   10 303 MTI
                          coupled by threaded ring, fire-resistant or non fire-
                          resistant, operating temperatures - 65 °C to 175 °C
                          continuous, 200 °C continuous, 260 °C peak - Part 015:
                          Jam-nut mounted receptacle with integrated accessory -
1245                      Product standard
       EN 2997-016:2010   Aerospace series - Connectors, electrical, circular,            NC    8 303 MTI
                          coupled by threaded ring, fire-resistant or non fire-
                          resistant, operating temperatures -65 °C to 175°C
                          continuous, 200°C continuous, 260°C peak - Part 016:
                          Plug with integrated accessory - Product standard
1246
       EN 3155-026:2010   Aerospace series - Electrical contacts used in elements of NC        13 303 MTI
                          connection - Part 026: Contacts, electrical, male, type A,
                          crimp, class R - Product standard
1247
       EN 3197:2010       Aerospace series - Design and installation of aircraft          NC   108 303 MTI
                          electrical and optical interconnection systems
1248
       EN 3280:2011       Aerospace series - Bearings, airframe rolling, rigid or self-   NC   31 303 MTI
1249                      aligning - Technical specification
       EN 3475-100:2010   Aerospace series - Cables, electrical, aircraft use - Test      NC   11 303 MTI
1250                      methods - Part 100: General




                                     Pagina 77 din 346
       EN 3475-603:2011   Aerospace series - Cables, electrical, aircraft use - Test   NC   11 303 MTI
                          methods - Part 603: Resistance to wet arc tracking
1251
       EN 4160:2011       Aerospace series - Paints and varnishes - Determination  NC        6 303 MTI
1252                      of the effect of thermal exposure
       EN 4165-024:2011   Aerospace series - Connectors, electrical, rectangular,  NC       13 303 MTI
                          modular - Operating temperature 175 °C continuous - Part
                          024: Single module plug - Product standard
1253
       EN 4165-026:2011   Aerospace series - Connectors, electrical, rectangular,  NC       15 303 MTI
                          modular - Operating temperature 175 °C continuous - Part
                          026: Accessories for single modules - Product standard
1254
       EN 4476:2011       Aerospace series - Paints and varnishes - Cold curing        NC   15 303 MTI
1255                      intermediate coat
       EN 4593:2011       Aerospace series - Paints and varnishes - Determination      NC    6 303 MTI
1256                      of solar absorptance
       EN 4604-009:2011   Aerospace series - Cable, electrical, for signal             NC   12 303 MTI
                          transmission - Part 009: Cable, coaxial, light weight, 50
                          ohms, 180 °C, type KW (light WN) - Product standard
1257
       EN 4604-010:2011   Aerospace series - Cable, electrical, for signal             NC   11 303 MTI
                          transmission - Part 010: Cable, coaxial, light weight, 50
                          Ohms, 200 °C, type KX (light WD) - Product standard
1258
       EN 4641-103:2010   Aerospace series - Cables, optical 125 µm diameter           NC   11 303 MTI
                          cladding - Part 103: Semi-loose, ruggedized simplex
                          construction 62,5/125 µm GI fibre nominal 2,74 mm,
1259                      outside diameter - Product standard
       EN 4641-104:2010   Aerospace series - Cables, optical 125 µm diameter           NC   12 303 MTI
                          cladding - Part 104: Semi-loose, ruggedized duplex
                          construction 62,5/125 µm GI fibre nominal, 4,95 mm
1260                      outside diameter - Product standard
       EN 4641-105:2010   Aerospace series - Cables, optical 125 µm diameter           NC   12 303 MTI
                          cladding - Part 105: Semi-loose, ruggedized quadraxial
                          construction 62,5/125 µm GI fibre nominal, 5,72 mm
                          outside diameter - Product standard
1261
       EN 4641-301:2011   Aerospace series - Cables, optical 125 µm diameter           NC   13 303 MTI
                          cladding - Part 301: Tight structure 50/125 µm GI fibre
                          nominal 1,8 mm outside diameter - Product standard
1262
       EN 4655:2010       Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-          NC    7 303 MTI
                          10-2) - Vacuum induction melted and consumable
                          electrode remelted - Solution treated and precipitation
                          treated - Bars - a or D ? 200 mm - Rm ? 1 400 MPa
1263
       EN 4656:2010       Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-          NC    8 303 MTI
                          11-2) - Vacuum induction melted and consumable
                          electrode remelted - Solution treated and precipitation
                          treated - Bars - a or D ? 200 mm - Rm ? 1520 MPa
1264
       EN 4657:2010       Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-          NC    8 303 MTI
                          11-2) - Vacuum induction melted and consumable
                          electrode remelted - Solution treated and precipitation
                          remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa
1265
       EN 4658:2010       Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-          NC    7 303 MTI
                          11-2) - Vacuum induction melted and consumable
                          electrode remelted - Solution treated and precipitation
                          treated - Forgings - a or D ? 200 mm - Rm ? 1 520 MPa
1266
       EN 4659:2010       Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-          NC    8 303 MTI
                          11-2) - Vacuum induction melted and consumable
                          electrode remelted - Solution treated and precipitation
                          treated - Forgings - a or D ? 200 mm - Rm ? 1 650 MPa
1267
       EN 4660-005:2011   Aerospace series - Modular and Open Avionics                 NC   505 303 MTI
1268                      Architectures - Part 005: Software




                                    Pagina 78 din 346
       EN 4670:2010      Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-        NC    8 303 MTI
                         11-2) - Vacuum induction melted and consumable
                         electrode remelted - Softened - Forging stock - a or D ?
1269                     300 mm
       EN 4671:2010      Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-        NC    8 303 MTI
                         10-2) - Vacuum induction melted and consumable
                         electrode remelted - Solution treated and precipitation
                         treated - Forgings - a or D ? 200 mm - Rm ? 1400 MPa
1270
       EN 4672:2011      Aerospace series - Steel FE-PM1504 (X1CrNiMoAlTi12-        NC    7 303 MTI
                         10-2) - Vacuum induction melted and consumable
                         electrode remelted - Softened - Forging stock - a or D ?
1271                     300 mm
       EN 4675:2011      Aerospace series - Titanium Ti-P63002                      NC    8 303 MTI
                         (Ti5Al5Mo5V3Cr0.4Fe) - Rm ? 1 300 MPa - Bars - De <
1272                     110 mm
       EN 4683:2011      Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - NC        7 303 MTI
                         Air melted - Filler metal for welding - Wire and rod
1273
       EN 4685:2011      Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 NC      7 303 MTI
1274                     mm - Rm ? 1 240 MPa
       EN 15722:2011     Intelligent transport systems - eSafety - eCall minimum set NC   32 345 MTI
1275                     of data (MSD)
       EN 15876-2:2011   Electronic fee collection - Evaluation of on-board and      NC   24 345 MTI
                         roadside equipment for conformity to EN 15509 - Part 2:
1276                     Abstract test suite




                                   Pagina 79 din 346
                                                      SECTIUNEA 2
                                      Standarde Europene Armonizate
                                                                                           Me-
                                                                                                   Pa-
Nr                                                                                        toda                              Mini-
                    Indicativ EN                  Titlul in limba engleza                         gini    CT   Directiva
Crt                                                                                       adop-                             ster
                                                                                                  total
                                                                                           tare
          EN ISO 12863:2010           Standard test method for assessing the             TR          22   97 2001/95/EC    MADR
                                      ignition propensity of cigarettes (ISO
      1                               12863:2010)
          EN ISO 12863:2010/AC:2011   Standard test method for assessing the             TR           4   97 2001/95/EC    MADR
                                      ignition propensity of cigarettes (ISO
      2                               12863:2010/Cor 1:2011)
          EN 16156:2010               Cigarettes - Assessment of the ignition          TR             5   97 2001/95/EC    MADR
      3                               propensity - Safety requirement
          EN 300 065-2 v1.2.1:2009    Electromagnetic compatibility and Radio          NCT           13    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Narrow-band direct-
                                      printing telegraph equipment for receiving
                                      meteorological or navigational information
                                      (NAVTEX);Part 2: Harmonized EN covering
                                      the essential requirements of article 3.2 of the
                                      R&TTE directive
      4
          EN 300 065-3 v1.2.1:2009    Electromagnetic compatibility and Radio            NCT         22    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Narrow-band direct-
                                      printing telegraph equipment for receiving
                                      meteorological or navigational information
                                      (NAVTEX);Part 3: Harmonized EN covering
                                      the essential requirements of article 3.3 (e) of
                                      the R&TTE directive
      5
          EN 300 086-2 v1.3.1:2010    Electromagnetic compatibility and Radio            NCT         17    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Land Mobile
                                      Service;Radio equipment with an internal or
                                      external RF connector intended primarily for
                                      analogue speech;Part 2: Harmonized EN
                                      covering the essential requirements of article
                                      3.2 of the R&TTE Directive
      6
          EN 300 113-2 v1.4.2:2009    Electromagnetic compatibility and Radio            NCT         19    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Land mobile
                                      service;Radio equipment intended for the
                                      transmission of data (and/or speech) using
                                      constant or non-constant envelope
                                      modulation and having an antenna
                                      connector;Part 2: Harmonized EN covering
                                      essential requirements of article 3.2 of the
                                      R&TTE Directive
      7
          EN 300 135-2 v1.2.1:2008    Electromagnetic compatibility and Radio            NCT         17    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Land Mobile
                                      Service;Citizens' Band (CB) radio
                                      equipment;Angle-modulated Citizens' Band
                                      radio equipment (PR 27 Radio
                                      Equipment);Part 2: Harmonized EN covering
                                      essential requirements of article 3.2 of the
                                      R&TTE Directive
      8
          EN 300 152-3 v1.1.1:2001    Electromagnetic compatibility and Radio       NCT              33    6 1999/5/EC     MCSI
                                      spectrum Matters (ERM);Maritime Emergency
                                      Position Indicating Radio Beacons (EPIRBs)
                                      intended for use on the frequency 121,5 MHz
                                      or the frequencies 121,5 MHz and 243 MHz
                                      for homing purposes only;Part 3: Harmonized
                                      EN covering essential requirements of article
                                      3.3 (e) of the R&TTE Directive


      9




                                                   Pagina 80 din 346
     EN 300 162-2 v1.2.1:2006   Electromagnetic compatibility and Radio       NCT     21   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Radiotelephone
                                transmitters and receivers for the maritime
                                mobile service operating in VHF bands;Part 2:
                                Harmonized EN covering essential
                                requirements of article 3.2 of the R&TTE
10                              Directive
     EN 300 162-3 v1.2.1:2006   Electromagnetic compatibility and Radio       NCT     24   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Radiotelephone
                                transmitters and receivers for the maritime
                                mobile service operating in VHF bands;Part 3:
                                Harmonized EN covering essential
                                requirements of article 3.3 (e) of the R&TTE
11                              Directive
     EN 300 219-2 v1.1.1:2001   Electromagnetic compatibility and Radio         NCT   17   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Land Mobile
                                Service;Radio equipment transmitting signals
                                to initiate a specific response in the
                                receiver;Part 2: Harmonized EN covering
                                essential requirements under article 3.2 of the
12                              R&TTE Directive
     EN 300 224-2 v1.1.1:2001   Electromagnetic compatibility and Radio         NCT   17   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);On-site paging
                                service;Part 2: Harmonized EN under article
13                              3.2 of the R&TTE Directive
     EN 300 296-2 v1.3.1:2010   Electromagnetic compatibility and Radio         NCT   17   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Land Mobile
                                Service;Radio equipment using integral
                                antennas intended primarily for analogue
                                speech;Part 2: Harmonized EN covering the
                                essential requirements of article 3.2 of the
14                              R&TTE Directive
     EN 300 330-2 v1.5.1:2010   Electromagnetic compatibility and Radio        NCT    14   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Short Range
                                Devices (SRD);Radio equipment in the
                                frequency range 9 kHz to 25 MHz and
                                inductive loop systems in the frequency range
                                9 kHz to 30 MHz;Part 2: Harmonized EN
                                covering the essential requirements of article
                                3.2 of the R&TTE Directive
15
     EN 300 373-2 v1.2.1:2009   Electromagnetic compatibility and Radio         NCT   29   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Maritime mobile
                                transmitters and receivers for use in the MF
                                and HF bands;Part 2: Harmonized EN
                                covering essential requirements under article
16                              3.2 of the R&TTE Directive
     EN 300 373-3 v1.2.1:2009   Electromagnetic compatibility and Radio       NCT     42   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Maritime mobile
                                transmitters and receivers for use in the MF
                                and HF bands;Part 3: Harmonized EN
                                covering essential requirements under article
                                3.3(e) of the R&TTE Directive;Equipment with
                                integrated or associated equipment for Class
                                E Digital Selective Calling (DSC)
17
     EN 300 386 v1.5.1:2010     Electromagnetic compatibility and Radio         NCT   51   6 2004/108/EC MCSI
                                spectrum Matters (ERM);Telecommunication
                                network equipment;ElectroMagnetic
                                Compatibility (EMC) requirements
18
     EN 300 390-2 v1.1.1:2000   Electromagnetic compatibility and Radio         NCT   16   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Land Mobile
                                Service;Radio equipment intended for the
                                transmission of data (and speech) and using
                                an integral antenna;Part 2: Harmonized EN
                                covering essential requirements under article
                                3.2 of the R&TTE Directive
19




                                             Pagina 81 din 346
     EN 300 422-2 v1.2.2:2008     Electromagnetic compatibility and Radio          NCT   14   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Wireless
                                  microphones in the 25 MHz to 3 GHz
                                  frequency range;Part 2: Harmonized EN
                                  covering essential requirements of article 3.2
20                                of the R&TTE Directive
     EN 300 433-2 v1.1.2:2000     Electromagnetic compatibility and Radio    NCT         16   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Land Mobile
                                  Service;Double Side Band (DSB) and/or
                                  Single Side Band (SSB) amplitude modulated
                                  citizen's band radio equipment;Part 2:
                                  Harmonized EN covering essential
                                  requirements under article 3.2 of R&TTE
                                  Directive
21
     EN 300 440-2 v1.4.1:2010     Electromagnetic compatibility and Radio          NCT   18   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Short range
                                  devices;Radio equipment to be used in the 1
                                  GHz to 40 GHz frequency range;Part 2:
                                  Harmonized EN covering the essential
                                  requirements of article 3.2 of the R&TTE
22                                Directive
     EN 300 674-2-1 v1.1.1:2004   Electromagnetic compatibility and Radio          NCT   14   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Road Transport and
                                  Traffic Telematics (RTTT);Dedicated Short
                                  Range Communication (DSRC) transmission
                                  equipment (500 kbit/s / 250 kbit/s) operating
                                  in the 5,8 GHz Industrial, Scientific and
                                  Medical (ISM) band;Part 2: Harmonized EN
                                  under article 3.2 of the R&TTE Directive;Sub-
                                  part 1: Requirements for the Road Side Units
                                  (RSU)

23
     EN 300 674-2-2 v1.1.1:2004   Electromagnetic compatibility and Radio          NCT   14   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Road Transport and
                                  Traffic Telematics (RTTT);Dedicated Short
                                  Range Communication (DSRC) transmission
                                  equipment (500 kbit/s / 250 kbit/s) operating
                                  in the 5,8 GHz Industrial, Scientific and
                                  Medical (ISM) band;Part 2: Harmonized EN
                                  under article 3.2 of the R&TTE Directive;Sub-
                                  part 2: Requirements for the On-Board Units
                                  (OBU)

24
     EN 300 676-2 v1.4.1:2010     Ground-based VHF hand-held, mobile and           NCT   16   6 1999/5/EC   MCSI
                                  fixed radio transmitters, receivers and
                                  transceivers for the VHF aeronautical mobile
                                  service using amplitude modulation;Part 2:
                                  Harmonized EN covering essential
                                  requirements of article 3.2 of the R&TTE
25                                Directive
     EN 300 698-2 v1.2.1:2009     Electromagnetic compatibility and Radio       NCT      19   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Radio telephone
                                  transmitters and receivers for the maritime
                                  mobile service operating in the VHF bands
                                  used on inland waterways;Part 2: Harmonized
                                  EN covering essential requirements of article
                                  3.2 of the R&TTE Directive
26
     EN 300 698-3 v1.2.1:2009     Electromagnetic compatibility and Radio       NCT      30   6 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Radio telephone
                                  transmitters and receivers for the maritime
                                  mobile service operating in the VHF bands
                                  used on inland waterways;Part 3: Harmonized
                                  EN covering essential requirements of article
                                  3.3 (e) of the R&TTE Directive
27




                                               Pagina 82 din 346
     EN 300 718-2 v1.1.1:2001   Electromagnetic compatibility and Radio      NCT       13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Avalanche
                                Beacons;Transmitter-receiver systems;Part 2:
                                Harmonized EN covering essential
                                requirements of article 3.2 of the R&TTE
28                              Directive
     EN 300 718-3 v1.2.1:2004   Electromagnetic compatibility and Radio      NCT       14   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Avalanche
                                Beacons;Transmitter-receiver systems;Part 3:
                                Harmonized EN covering essential
                                requirements of article 3.3e of the R&TTE
29                              Directive
     EN 300 720-2 v1.2.1:2007   Electromagnetic compatibility and Radio   NCT          18   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Ultra-High
                                Frequency (UHF) on-board vessels
                                communications systems and equipment;Part
                                2: Harmonized EN under article 3.2 of the
30                              R&TTE Directive
     EN 300 761-2 v1.1.1:2001   Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Short Range
                                Devices (SRD);Automatic Vehicle
                                Identification (AVI) for railways operating in
                                the 2,45 GHz frequency range;Part 2:
                                Harmonized standard covering essential
                                requirements under article 3.2 of the R&TTE
                                Directive
31
     EN 301 025-2 v1.4.1:2010   Electromagnetic compatibility and Radio          NCT   21   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);VHF radiotelephone
                                equipment for general communications and
                                associated equipment for Class D Digital
                                Selective Calling (DSC);Part 2: Harmonized
                                EN covering the essential requirements of
                                article 3.2 of the R&TTE Directive
32
     EN 301 025-3 v1.4.1:2010   Electromagnetic compatibility and Radio          NCT   21   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);VHF radiotelephone
                                equipment for general communications and
                                associated equipment for Class D Digital
                                Selective Calling (DSC);Part 3: Harmonized
                                EN covering the essential requirements of
                                article 3.3(e) of the R&TTE Directive
33
     EN 301 091-2 v1.3.2:2006   Electromagnetic compatibility and Radio      NCT       13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Short Range
                                Devices;Road Transport and Traffic
                                Telematics (RTTT);Radar equipment
                                operating in the 76 GHz to 77 GHz range;Part
                                2: Harmonized EN covering essential
                                requirements of article 3.2 of the R&TTE
                                Directive
34
     EN 301 166-2 v1.2.3:2009   Electromagnetic compatibility and Radio          NCT   19   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Land Mobile
                                Service;Radio equipment for analogue and/or
                                digital communication (speech and/or data)
                                and operating on narrow band channels and
                                having an antenna connector;Part 2:
                                Harmonized EN covering essential
                                requirements of article 3.2 of the R&TTE
                                Directive
35
     EN 301 178-2 v1.2.2:2007   Electromagnetic compatibility and Radio          NCT   21   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Portable Very High
                                Frequency (VHF) radiotelephone equipment
                                for the maritime mobile service operating in
                                the VHF bands (for non-GMDSS applications
                                only);Part 2: Harmonized EN covering
                                essential requirements of article 3.2 of the
                                R&TTE Directive
36




                                             Pagina 83 din 346
     EN 301 357-2 v1.4.1:2008    Electromagnetic compatibility and Radio        NCT   15   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Cordless audio
                                 devices in the range 25 MHz to 2 000
                                 MHz;Part 2: Harmonized EN covering
                                 essential requirements of article 3.2 of the
37                               R&TTE Directive
     EN 301 423 v1.1.1:2000      Electromagnetic Compatibility and Radio     NCT      22   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Harmonized
                                 Standard for the Terrestrial Flight
                                 Telecommunications System under article 3.2
38                               of the R&TTE Directive
     EN 301 449 v1.1.1:2006      Electromagnetic compatibility and Radio        NCT   40   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Harmonized EN for
                                 CDMA spread spectrum base stations
                                 operating in the 450 MHz cellular band
                                 (CDMA 450) and 410, 450 and 870 MHz
                                 PAMR bands (CDMA-PAMR) covering
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
39
     EN 301 489-33 v1.1.1:2009   Electromagnetic compatibility and Radio        NCT   16   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 33: Specific
                                 conditions for Ultra Wide Band (UWB)
40                               communications devices
     EN 301 489-1 v1.8.1:2008    Electromagnetic compatibility and Radio        NCT   45   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 1: Common
41                               technical requirements
     EN 301 489-2 v1.3.1:2002    Electromagnetic compatibility and Radio        NCT   17   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 2: Specific
42                               conditions for radio paging equipment
     EN 301 489-3 v1.4.1:2002    Electromagnetic compatibility and Radio        NCT   19   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 3: Specific
                                 conditions for Short-Range Devices (SRD)
                                 operating on frequencies between 9 kHz and
43                               40 GHz
     EN 301 489-4 v1.4.1:2009    Electromagnetic compatibility and Radio        NCT   21   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 4: Specific
                                 conditions for fixed radio links, Broadband
                                 Data Transmission System Base stations,
                                 ancillary equipment and services
44
     EN 301 489-6 v1.3.1:2008    Electromagnetic compatibility and Radio        NCT   18   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 6: Specific
                                 conditions for Digital Enhanced Cordless
45                               Telecommunications (DECT) equipment
     EN 301 489-7 v1.3.1:2005    Electromagnetic compatibility and Radio       NCT    21   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 7: Specific
                                 conditions for mobile and portable radio and
                                 ancillary equipment of digital cellular radio
                                 telecommunications systems (GSM and DCS)
46




                                              Pagina 84 din 346
     EN 301 489-9 v1.4.1:2007    Electromagnetic compatibility and Radio         NCT    23   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 9: Specific
                                 conditions for wireless microphones, similar
                                 Radio Frequency (RF) audio link equipment,
                                 cordless audio and in-ear monitoring devices
47
     EN 301 489-10 v1.3.1:2002   Electromagnetic compatibility and Radio         NCT    19   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 10: Specific
                                 conditions for First (CT1 and CT1+) and
                                 Second Generation Cordless Telephone
48                               (CT2) equipment
     EN 301 489-11 v1.3.1:2006   Electromagnetic compatibility and Radio         NCT    23   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 11: Specific
                                 conditions for terrestrial sound broadcasting
49                               service transmitters
     EN 301 489-12 v2.2.2:2008   Electromagnetic compatibility and Radio          NCT   22   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 12: Specific
                                 conditions for Very Small Aperture Terminal,
                                 Satellite Interactive Earth Stations operated in
                                 the frequency ranges between 4 GHz and 30
                                 GHz in the Fixed Satellite Service (FSS)
50
     EN 301 489-16 v1.2.1:2002   Electromagnetic compatibility and Radio         NCT    16   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 16: Specific
                                 conditions for analogue cellular radio
                                 communications equipment, mobile and
51                               portable
     EN 301 489-17 v2.1.1:2009   Electromagnetic compatibility and Radio         NCT    17   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment;Part 17: Specific conditions for
                                 Broadband Data Transmission Systems
52
     EN 301 489-20 v1.2.1:2002   Electromagnetic compatibility and Radio         NCT    16   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 20: Specific
                                 conditions for Mobile Earth Stations (MES)
                                 used in the Mobile Satellite Services (MSS)
53
     EN 301 489-22 v1.3.1:2003   Electromagnetic compatibility and Radio      NCT       15   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 22: Specific
                                 conditions for ground based VHF aeronautical
                                 mobile and fixed radio equipment
54
     EN 301 489-23 v1.4.1:2010   Electromagnetic compatibility and Radio     NCT        21   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 23: Specific
                                 conditions for IMT-2000 CDMA, Direct Spread
                                 (UTRA and E-UTRA) Base Station (BS) radio,
                                 repeater and ancillary equipment
55




                                              Pagina 85 din 346
     EN 301 489-24 v1.5.1:2010   Electromagnetic compatibility and Radio        NCT     24   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 24:Specific
                                 conditions for IMT-2000 CDMA Direct Spread
                                 (UTRA and E-UTRA) for Mobile and portable
                                 (UE) radio and ancillary equipment
56
     EN 301 489-25 v2.3.2:2005   Electromagnetic compatibility and Radio        NCT     22   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 25: Specific
                                 conditions for CDMA 1x spread spectrum
57                               Mobile Stations and ancillary equipment
     EN 301 489-26 v2.3.2:2005   Electromagnetic compatibility and Radio        NCT     18   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 26: Specific
                                 conditions for CDMA 1x spread spectrum
                                 Base Stations, repeaters and ancillary
58                               equipment
     EN 301 489-29 v1.1.1:2009   Electromagnetic compatibility and Radio     NCT        26   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 29: Specific
                                 conditions for Medical Data Service Devices
                                 (MEDS) operating in the 401 MHz to 402 MHz
                                 and 405 MHz to 406 MHz bands
59
     EN 301 489-31 v1.1.1:2005   Electromagnetic compatibility and Radio        NCT     25   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 31: Specific
                                 conditions for equipment in the 9 kHz to 315
                                 kHz band for Ultra Low Power Active Medical
                                 Implants (ULP-AMI) and related peripheral
                                 devices (ULP-AMI-P)
60
     EN 301 489-32 v1.1.1:2005   Electromagnetic compatibility and Radio        NCT     12   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 32: Specific
                                 conditions for Ground and Wall Probing
61                               Radar applications
     EN 301 489-34 v1.1.1:2010   Electromagnetic compatibility and Radio        NCT     20   6 2004/108/EC MCSI
                                 spectrum Matters (ERM);ElectroMagnetic
                                 Compatibility (EMC) standard for radio
                                 equipment and services;Part 34: Specific
                                 conditions for External Power Supply (EPS)
62                               for mobile phones
     EN 301 526 v1.1.1:2006      Electromagnetic compatibility and Radio        NCT     43   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Harmonized EN for
                                 CDMA spread spectrum mobile stations
                                 operating in the 450 MHz cellular band
                                 (CDMA 450) and 410, 450 and 870 MHz
                                 PAMR bands (CDMA-PAMR) covering
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
63
     EN 301 783-2 v1.2.1:2010    Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Land Mobile
                                 Service;Commercially available amateur radio
                                 equipment;Part 2: Harmonized EN covering
                                 the essential requirements of article 3.2 of the
64                               R&TTE Directive
     EN 301 796 v1.1.1:2000      Electromagnetic compatibility and Radio       NCT      27   6 1999/5/EC   MCSI
                                 Spectrum Matters (ERM);Harmonized EN for
                                 CT1 and CT1+ cordless telephone equipment
                                 covering essential requirements under article
                                 3.2 of the R&TTE directive
65




                                              Pagina 86 din 346
     EN 301 797 v1.1.1:2000     Electromagnetic compatibility and Radio         NCT   34   6 1999/5/EC   MCSI
                                Spectrum Matters (ERM);Harmonized EN for
                                CT2 cordless telephone equipment covering
                                essential requirements under article 3.2 of the
66                              R&TTE directive
     EN 301 839-2 v1.3.1:2009   Electromagnetic compatibility and Radio        NCT    17   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Short Range
                                Devices (SRD);Ultra Low Power Active
                                Medical Implants (ULP-AMI) and Peripherals
                                (ULP-AMI-P) operating in the frequency range
                                402 MHz to 405 MHz;Part 2: Harmonized EN
                                covering essential requirements of article 3.2
                                of the R&TTE Directive
67
     EN 301 840-2 v1.1.1:2001   Electromagnetic compatibility and Radio        NCT    13   6 1999/5/EC   MCSI
                                Spectrum Matters (ERM);Digital radio
                                microphones operating in the CEPT
                                Harmonized band 1 785 MHz to 1 800
                                MHz;Part 2: Harmonized EN under article 3.2
68                              of the R&TTE Directive
     EN 301 843-1 v1.2.1:2004   Electromagnetic compatibility and Radio       NCT     34   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);ElectroMagnetic
                                Compatibility (EMC) standard for marine radio
                                equipment and services;Part 1: Common
69                              technical requirements
     EN 301 843-2 v1.2.1:2004   Electromagnetic compatibility and Radio       NCT     13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);ElectroMagnetic
                                Compatibility (EMC) standard for marine radio
                                equipment and services;Part 2: Specific
                                conditions for VHF radiotelephone
70                              transmitters and receivers
     EN 301 843-4 v1.2.1:2004   Electromagnetic compatibility and Radio       NCT     13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);ElectroMagnetic
                                Compatibility (EMC) standard for marine radio
                                equipment and services;Part 4: Specific
                                conditions for Narrow-Band Direct-Printing
71                              (NBDP) NAVTEX receivers
     EN 301 843-5 v1.1.1:2004   Electromagnetic compatibility and Radio       NCT     14   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);ElectroMagnetic
                                Compatibility (EMC) standard for marine radio
                                equipment and services;Part 5: Specific
                                conditions for MF/HF radiotelephone
72                              transmitters and receivers
     EN 301 843-6 v1.1.1:2006   Electromagnetic compatibility and Radio       NCT     18   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);ElectroMagnetic
                                Compatibility (EMC) standard for marine radio
                                equipment and services;Part 6: Specific
                                conditions for Earth Stations on board
                                Vessels operating in frequency bands above
73                              3 GHz
     EN 301 908-1 v4.2.1:2010   Electromagnetic compatibility and Radio        NCT    24   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                1: Harmonized EN for IMT-2000, introduction
                                and common requirements, covering the
                                essential requirements of article 3.2 of the
                                R&TTE Directive
74
     EN 301 908-2 v4.2.1:2010   Electromagnetic compatibility and Radio      NCT      38   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                2: Harmonized EN for IMT-2000, CDMA
                                Direct Spread (UTRA FDD and E-UTRA FDD)
                                (UE) covering the essential requirements of
                                article 3.2 of the R&TTE Directive
75




                                            Pagina 87 din 346
     EN 301 908-3 v4.2.1:2010   Electromagnetic compatibility and Radio      NCT       45   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                3: Harmonized EN for IMT-2000, CDMA
                                Direct Spread (UTRA FDD and E-UTRA FDD)
                                (BS) covering the essential requirements of
                                article 3.2 of the R&TTE Directive
76
     EN 301 908-4 v4.2.1:2010   Electromagnetic compatibility and Radio        NCT     61   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                4: Harmonized EN for IMT-2000, CDMA Multi-
                                Carrier (cdma2000) and Evolved CDMA Multi-
                                Carrier Ultra Mobile Broadband (UMB) (UE)
                                covering the essential requirements of article
                                3.2 of the R&TTE Directive

77
     EN 301 908-5 v3.2.1:2007   Electromagnetic compatibility and Radio      NCT       49   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                5: Harmonized EN for IMT-2000, CDMA Multi-
                                Carrier (cdma2000) (BS) covering essential
                                requirements of article 3.2 of the R&TTE
                                Directive
78
     EN 301 908-5 v4.2.1:2010   Electromagnetic compatibility and Radio        NCT     49   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                5: Harmonized EN for IMT-2000, CDMA Multi-
                                Carrier (cdma2000) and Evolved CDMA Multi-
                                Carrier Ultra Mobile Broadband (UMB) (BS)
                                covering the essential requirements of article
                                3.2 of the R&TTE Directive

79
     EN 301 908-6 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   46   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                6: Harmonized EN for IMT-2000, CDMA TDD
                                (UTRA TDD and E-UTRA TDD) (UE) covering
                                the essential requirements of article 3.2 of the
                                R&TTE Directive
80
     EN 301 908-7 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   70   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS),
                                Repeaters and User Equipment (UE) for IMT-
                                2000 Third-Generation cellular networks;Part
                                7: Harmonized EN for IMT-2000, CDMA TDD
                                (UTRA TDD and E-UTRA TDD) (BS) covering
                                the essential requirements of article 3.2 of the
                                R&TTE Directive
81
     EN 301 908-9 v1.1.1:2002   Electromagnetic compatibility and Radio     NCT        68   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Base Stations (BS)
                                and User Equipment (UE) for IMT-2000 Third-
                                Generation cellular networks;Part 9:
                                Harmonized EN for IMT-2000, TDMA Single-
                                Carrier (UWC 136) (BS) covering essential
                                requirements of article 3.2 of the R&TTE
                                Directive
82




                                             Pagina 88 din 346
     EN 301 908-11 v4.2.1:2010   Electromagnetic compatibility and Radio      NCT       32   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 11: Harmonized EN for IMT-2000, CDMA
                                 Direct Spread (UTRA FDD and E-UTRA FDD)
                                 (Repeaters) covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive

83
     EN 301 908-12 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   30   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 12: Harmonized EN for IMT-2000, CDMA
                                 Multi-Carrier (cdma2000) (Repeaters)
                                 covering the essential requirements of article
                                 3.2 of the R&TTE Directive
84
     EN 301 908-13 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   37   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 13: Harmonized EN for IMT-2000, Evolved
                                 Universal Terrestrial Radio Access (E-UTRA)
                                 (UE) covering the essential requirements of
                                 article 3.2 of the R&TTE Directive
85
     EN 301 908-14 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   40   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 14: Harmonized EN for IMT-2000, Evolved
                                 Universal Terrestrial Radio Access (E-UTRA)
                                 (BS) covering the essential requirements of
                                 article 3.2 of the R&TTE Directive
86
     EN 301 908-15 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   37   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 15: Harmonized EN for IMT-2000, Evolved
                                 Universal Terrestrial Radio Access (E-UTRA)
                                 (FDD Repeaters) covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive

87
     EN 301 908-16 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   40   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 16: Harmonized EN for IMT-2000, Evolved
                                 CDMA Multi-Carrier Ultra Mobile Broadband
                                 (UMB) (UE) covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive
88
     EN 301 908-17 v4.2.1:2010   Electromagnetic compatibility and Radio          NCT   44   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Base Stations (BS),
                                 Repeaters and User Equipment (UE) for IMT-
                                 2000 Third-Generation cellular networks;Part
                                 17: Harmonized EN for IMT-2000, Evolved
                                 CDMA Multi-Carrier Ultra Mobile Broadband
                                 (UMB) (BS) covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive
89




                                              Pagina 89 din 346
     EN 301 929-2 v1.2.1:2007   Electromagnetic compatibility and Radio          NCT   25   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);VHF transmitters
                                and receivers as Coast Stations for GMDSS
                                and other applications in the maritime mobile
                                service;Part 2: Harmonized EN under article
                                3.2 of the R&TTE Directive
90
     EN 302 018-2 v1.2.1:2006   Electromagnetic compatibility and Radio          NCT   28   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Transmitting
                                equipment for the Frequency Modulated (FM)
                                sound broadcasting service;Part 2:
                                Harmonized EN under article 3.2 of the
91                              R&TTE Directive
     EN 302 054-2 v1.1.1:2003   Electromagnetic compatibility and Radio     NCT        15   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Meteorological Aids
                                (Met Aids);Radiosondes to be used in the
                                400,15 MHz to 406 MHz frequency range with
                                power levels ranging up to 200 mW;Part 2:
                                Harmonized EN covering essential
                                requirements under article 3.2 of the R&TTE
                                Directive
92
     EN 302 065 v1.2.1:2010     Electromagnetic compatibility and Radio          NCT   67   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Short Range
                                Devices (SRD) using Ultra Wide Band
                                technology (UWB) for communications
                                purposes;Harmonized EN covering the
                                essential requirements of article 3.2 of the
93                              R&TTE Directive
     EN 302 066-2 v1.2.1:2008   Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Ground- and Wall-
                                Probing Radar applications (GPR/WPR)
                                imaging systems;Part 2: Harmonized EN
                                covering essential requirements of article 3.2
                                of the R&TTE Directive
94
     EN 302 077-2 v1.1.1:2005   Electromagnetic compatibility and Radio          NCT   24   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Transmitting
                                equipment for the Terrestrial - Digital Audio
                                Broadcasting (T-DAB) service;Part 2:
                                Harmonized EN under article 3.2 of the
95                              R&TTE Directive
     EN 302 194-2 v1.1.2:2007   Electromagnetic compatibility and Radio       NCT      15   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Navigation radar
                                used on inland waterways;Part 2: Harmonized
                                EN covering essential requirements of article
                                3.2 of the R&TTE Directive
96
     EN 302 195-2 v1.1.1:2004   Electromagnetic compatibility and Radio          NCT   14   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Radio equipment in
                                the frequency range 9 kHz to 315 kHz for
                                Ultra Low Power Active Medical Implants
                                (ULP-AMI) and accessories;Part 2:
                                Harmonized EN covering essential
                                requirements of article 3.2 of the R&TTE
                                Directive
97
     EN 302 208-2 v1.3.1:2010   Electromagnetic compatibility and Radio        NCT     15   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Radio Frequency
                                Identification Equipment operating in the band
                                865 MHz to 868 MHz with power levels up to
                                2 W;Part 2: Harmonized EN covering
                                essential requirements of article 3.2 of the
                                R&TTE Directive
98
     EN 302 245-2 v1.1.1:2005   Electromagnetic compatibility and Radio          NCT   22   6 1999/5/EC   MCSI
                                spectrum Matters (ERM);Transmitting
                                equipment for the Digital Radio Mondiale
                                (DRM) broadcasting service Part 2:
                                Harmonized EN under article 3.2 of the
99                              R&TTE Directive




                                             Pagina 90 din 346
      EN 302 248 v1.1.2:2008     Electromagnetic compatibility and Radio          NCT   30   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Navigation radar for
                                 use on non-SOLAS vessels;Harmonized EN
                                 covering the essential requirements of article
                                 3.2 of the R&TTE Directive
100
      EN 302 264-2 v1.1.1:2009   Electromagnetic compatibility and Radio      NCT       13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices;Road Transport and Traffic
                                 Telematics (RTTT);Short Range Radar
                                 equipment operating in the 77 GHz to 81 GHz
                                 band;Part 2: Harmonized EN covering the
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
101
      EN 302 288-2 v1.3.2:2009   Electromagnetic compatibility and Radio      NCT       14   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices;Road Transport and Traffic
                                 Telematics (RTTT);Short range radar
                                 equipment operating in the 24 GHz range;Part
                                 2: Harmonized EN covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive
102
      EN 302 291-2 v1.1.1:2005   Electromagnetic compatibility and Radio     NCT        14   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Close Range Inductive Data
                                 Communication equipment operating at 13,56
                                 MHz;Part 2: Harmonized EN under article 3.2
103                              of the R&TTE Directive
      EN 302 297 v1.1.1:2005     Electromagnetic compatibility and Radio          NCT   27   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Transmitting
                                 equipment for the analogue television
                                 broadcasting service;Harmonized EN under
104                              article 3.2 of the R&TTE Directive
      EN 302 372-2 v1.2.1:2011   Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Equipment for Detection and
                                 Movement;Tanks Level Probing Radar
                                 (TLPR) operating in the frequency bands 5,8
                                 GHz, 10 GHz, 25 GHz, 61 GHz and 77
                                 GHz;Part 2: Harmonized EN covering the
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
105
      EN 302 426 v1.1.1:2006     Electromagnetic compatibility and Radio          NCT   36   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Harmonized EN for
                                 CDMA spread spectrum Repeaters operating
                                 in the 450 MHz cellular band (CDMA450) and
                                 the 410 MHz, 450 MHz and 870 MHz PAMR
                                 bands (CDMA-PAMR) covering essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive
106
      EN 302 435-2 v1.3.1:2009   Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Technical characteristics for
                                 SRD equipment using Ultra WideBand
                                 technology (UWB);Building Material Analysis
                                 and Classification equipment applications
                                 operating in the frequency band from 2,2 GHz
                                 to 8,5 GHz;Part 2: Harmonized EN covering
                                 the essential requirements of article 3.2 of the
                                 R&TTE Directive

107
      EN 302 454-2 v1.1.1:2007   Electromagnetic compatibility and Radio          NCT   14   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Meteorological Aids
                                 (Met Aids);Radiosondes to be used in the 1
                                 668,4 MHz to 1 690 MHz frequency
                                 range;Part 2: Harmonized EN covering
                                 essential requirements of article 3.2 of the
108                              R&TTE Directive




                                              Pagina 91 din 346
      EN 302 480 v1.1.2:2008     Electromagnetic compatibility and Radio      NCT       34   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Harmonized EN for
                                 the GSM onboard aircraft system covering the
                                 essential requirements of Article 3.2 of the
109                              R&TTE Directive
      EN 302 498-2 v1.1.1:2010   Electromagnetic compatibility and Radio          NCT   13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Technical characteristics for
                                 SRD equipment using Ultra WideBand
                                 technology (UWB);Object Discrimination and
                                 Characterization Applications for power tool
                                 devices operating in the frequency band from
                                 2,2 GHz to 8,5 GHz;Part 2: Harmonized EN
                                 covering the essential requirements of article
                                 3.2 of the R&TTE Directive

110
      EN 302 500-2 v2.1.1:2010   Electromagnetic compatibility and Radio      NCT       13   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD) using Ultra WideBand (UWB)
                                 technology;Location Tracking equipment
                                 operating in the frequency range from 6 GHz
                                 to 9 GHz;Part 2: Harmonized EN covering the
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
111
      EN 302 510-2 v1.1.1:2007   Electromagnetic compatibility and Radio       NCT      17   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Radio equipment in
                                 the frequency range 30 MHz to 37,5 MHz for
                                 Ultra Low Power Active Medical Membrane
                                 Implants and Accessories;Part 2: Harmonized
                                 EN covering essential requirements of article
                                 3.2 of the R&TTE Directive
112
      EN 302 536-2 v1.1.1:2007   Electromagnetic compatibility and Radio          NCT   16   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Radio equipment in the
                                 frequency range 315 kHz to 600 kHz;Part 2:
                                 Harmonized EN covering essential
                                 requirements of article 3.2 of the R&TTE
113                              Directive
      EN 302 537-2 v1.1.2:2007   Electromagnetic compatibility and Radio      NCT       20   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Ultra Low Power Medical Data
                                 Service Systems operating in the frequency
                                 range 401 MHz to 402 MHz and 405 MHz to
                                 406 MHz;Part 2: Harmonized EN covering
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
114
      EN 302 561 v1.2.1:2009     Electromagnetic compatibility and Radio          NCT   63   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Land Mobile
                                 Service;Radio equipment using constant or
                                 non-constant envelope modulation operating
                                 in a channel bandwidth of 25 kHz, 50 kHz,
                                 100 kHz or 150 kHz;Harmonized EN covering
                                 essential requirements of article 3.2 of the
                                 R&TTE Directive
115
      EN 302 571 v1.1.1:2008     Intelligent Transport Systems                    NCT   41   6 1999/5/EC   MCSI
                                 (ITS);Radiocommunications equipment
                                 operating in the 5 855 MHz to 5 925 MHz
                                 frequency band;Harmonized EN covering the
                                 essential requirements of article 3.2 of the
116                              R&TTE Directive
      EN 302 608 v1.1.1:2008     Electromagnetic compatibility and Radio          NCT   32   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Radio equipment for
                                 Eurobalise railway systems;Harmonized EN
                                 covering the essential requirements of article
117                              3.2 of the R&TTE Directive




                                              Pagina 92 din 346
      EN 302 609 v1.1.1:2008     Electromagnetic compatibility and Radio      NCT       25   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices (SRD);Radio equipment for Euroloop
                                 railway systems;Harmonized EN covering the
                                 essential requirements of article 3.2 of the
118                              R&TTE Directive
      EN 302 617-2 v1.1.1:2010   Electromagnetic compatibility and Radio        NCT     16   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Ground-based UHF
                                 radio transmitters, receivers and transceivers
                                 for the UHF aeronautical mobile service using
                                 amplitude modulation;Part 2: Harmonized EN
                                 covering the essential requirements of article
                                 3.2 of the R&TTE Directive
119
      EN 302 625 v1.1.1:2009     Electromagnetic compatibility and Radio        NCT     39   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);5 GHz BroadBand
                                 Disaster Relief applications
                                 (BBDR);Harmonized EN covering the
                                 essential requirements of article 3.2 of the
120                              R&TTE Directive
      EN 302 645 v1.1.1:2010     Electromagnetic compatibility and Radio          NCT   32   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Short Range
                                 Devices;Global Navigation Satellite Systems
                                 (GNSS) Repeaters;Harmonized EN covering
                                 the essential requirements of article 3.2 of the
121                              R&TTE Directive
      EN 302 686 v1.1.1:2011     Intelligent Transport Systems                  NCT     43   6 1999/5/EC   MCSI
                                 (ITS);Radiocommunications equipment
                                 operating in the 63 GHz to 64 GHz frequency
                                 band;Harmonized EN covering the essential
                                 requirements of article 3.2 of the R&TTE
122                              Directive
      EN 302 752 v1.1.1:2009     Electromagnetic compatibility and Radio        NCT     26   6 1999/5/EC   MCSI
                                 spectrum Matters (ERM);Active radar target
                                 enhancers;Harmonized EN covering the
                                 essential requirements of article 3.2 of the
123                              R&TTE Directive
      EN 50295:1999              Low-voltage switchgear and controlgear -       FCT     89   9 2004/108/EC MCSI
                                 Controller and device interface systems -
124                              Actuator Sensor interface (AS-i)
      EN 61543:1995/A12:2005     Residual current-operated protective devices   NCT      2   11 2004/108/EC MCSI
                                 (RCDs) for household and similar use -
125                              Electromagnetic compatibility
      EN 61543:1995/A2:2006      Residual current-operated protective devices   NCT      9   11 2004/108/EC MCSI
                                 (RCDs) for household and similar use -
126                              Electromagnetic compatibility
      EN 61326-2-3:2006          Electrical equipment for measurement, control NCT      30   23 2004/108/EC MCSI
                                 and laboratory use - EMC requirements --
                                 Part 2-3: Particular requirements - Test
                                 configuration, operational conditions and
                                 performance criteria for transducers with
                                 integrated or remote signal conditioning
127
      EN 61326-2-4:2006          Electrical equipment for measurement, control NCT      17   23 2004/108/EC MCSI
                                 and laboratory use - EMC requirements --
                                 Part 2-4: Particular requirements - Test
                                 configurations, operational conditions and
                                 performance criteria for insulation monitoring
                                 devices according to IEC 61557-8 and for
                                 equipment for insulation fault location
                                 according to IEC 61557-9
128
      EN 61326-2-5:2006          Electrical equipment for measurement, control NCT      13   23 2004/108/EC MCSI
                                 and laboratory use - EMC requirements --
                                 Part 2-5: Particular requirements - Test
                                 configurations, operational conditions and
                                 performance criteria for field devices with
                                 interfaces according to IEC 61784-1, CP 3/2
129




                                              Pagina 93 din 346
      EN 50498:2010               Electromagnetic compatibility (EMC) - Product NCT       9   30 2004/108/EC MCSI
                                  family standard for aftermarket electronic
130                               equipment in vehicles
      EN 50529-1:2010             EMC Network Standard -- Part 1: Wire-line        NCT   11   30 2004/108/EC MCSI
                                  telecommunications networks using
131                               telephone wires
      EN 50529-2:2010             EMC Network Standard -- Part 2: Wire-line        NCT   14   30 2004/108/EC MCSI
                                  telecommunications networks using coaxial
132                               cables
      EN 55011:2009/A1:2010       Industrial, scientific and medical equipment -   NCT    9   30 2004/108/EC MCSI
                                  Radio-frequency disturbance characteristics -
                                  Limits and methods of measurement
133
      EN 55012:2007/A1:2009       Vehicles, boats and internal combustion          NCT    6   30 2004/108/EC MCSI
                                  engines - Radio disturbance characteristics -
                                  Limits and methods of measurement for the
                                  protection of off-board receivers
134
      EN 55013:2001/A1:2003       Sound and television broadcast receivers and FCT       15   30 2004/108/EC MCSI
                                  associated equipment - Radio disturbance
                                  characteristics - Limits and methods of
135                               measurement
      EN 55013:2001/A2:2006       Sound and television broadcast receivers and FCT        6   30 2004/108/EC MCSI
                                  associated equipment - Radio disturbance
                                  characteristics - Limits and methods of
136                               measurement
      EN 55014-1:2006             Electromagnetic compatibility - Requirements     NCT   80   30 2004/108/EC MCSI
                                  for household appliances, electric tools and
                                  similar apparatus -- Part 1: Emission
137
      EN 55014-1:2006/A1:2009     Electromagnetic compatibility - Requirements     NCT   18   30 2004/108/EC MCSI
                                  for household appliances, electric tools and
                                  similar apparatus -- Part 1: Emission
138
      EN 55014-2:1997/A2:2008     Electromagnetic compatibility - Requirements NCT        9   30 2004/108/EC MCSI
                                  for household appliances, electric tools and
                                  similar apparatus -- Part 2: Immunity - Product
139                               family standard
      EN 55015:2006               Limits and methods of measurement of radio       NCT   50   30 2004/108/EC MCSI
                                  disturbance characteristics of electrical
140                               lighting and similar equipment
      EN 55015:2006/A1:2007       Limits and methods of measurement of radio       NCT   12   30 2004/108/EC MCSI
                                  disturbance characteristics of electrical
141                               lighting and similar equipment
      EN 55015:2006/A2:2009       Limits and methods of measurement of radio       NCT    6   30 2004/108/EC MCSI
                                  disturbance characteristics of electrical
142                               lighting and similar equipment
      EN 55020:2007               Sound and television broadcast receivers and NCT       92   30 2004/108/EC MCSI
                                  associated equipment - Immunity
                                  characteristics - Limits and methods of
143                               measurement
      EN 55022:2010               Information technology equipment - Radio         TR    84   30 2004/108/EC MCSI
                                  disturbance characteristics - Limits and
144                               methods of measurement
      EN 55024:2010               Information technology equipment - Immunity      NCT   51   30 2004/108/EC MCSI
                                  characteristics - Limits and methods of
145                               measurement
      EN 61000-3-11:2000          Electromagnetic compatibility (EMC) -- Part 3- FCT     19   30 2004/108/EC MCSI
                                  11: Limits - Limitation of voltage changes,
                                  voltage fluctuations and flicker in public low-
                                  voltage supply systems - Equipment with
                                  rated current <= 75 A and subject to
146                               conditional connection
      EN 61000-3-2:2006/A1:2009   Electromagnetic compatibility (EMC) -- Part 3- NCT      7   30 2004/108/EC MCSI
                                  2: Limits - Limits for harmonic current
                                  emissions (equipment input current <= 16 A
147                               per phase)
      EN 61000-3-2:2006/A2:2009   Electromagnetic compatibility (EMC) -- Part 3- NCT      9   30 2004/108/EC MCSI
                                  2: Limits - Limits for harmonic current
                                  emissions (equipment input current <= 16 A
148                               per phase)




                                               Pagina 94 din 346
      EN 61000-6-3:2007/A1:2011   Electromagnetic compatibility (EMC) -- Part 6- TR       17   30 2004/108/EC MCSI
                                  3: Generic standards - Emission standard for
                                  residential, commercial and light-industrial
149                               environments
      EN 61000-6-4:2007/A1:2011   Electromagnetic compatibility (EMC) -- Part 6- TR       15   30 2004/108/EC MCSI
                                  4: Generic standards - Emission standard for
150                               industrial environments
      EN 62310-2:2007             Static transfer systems (STS) -- Part 2:          NCT   42   36 2004/108/EC MCSI
                                  Electromagnetic compatibility (EMC)
151                               requirements
      EN 12895:2000               Industrial trucks - Electromagnetic               FCT   13   85 2004/108/EC MCSI
152                               compatibility
      EN 60974-10:2007            Arc welding equipment -- Part 10:                 NCT   30 129 2004/108/EC MCSI
                                  Electromagnetic compatibility (EMC)
153                               requirements
      EN 60730-1:2000/A16:2007    Automatic electrical controls for household       NCT   12 130 2004/108/EC MCSI
                                  and similar use -- Part 1: General
154                               requirements
      EN 50270:2006               Electromagnetic compatibility - Electrical  NCT         14 137 2004/108/EC MCSI
                                  apparatus for the detection and measurement
                                  of combustible gases, toxic gases or oxygen
155
      EN 62052-21:2004            Electricity metering equipment (a.c.) - General NCT     50 164 2004/108/EC MCSI
                                  requirements, tests and test conditions -- Part
                                  21: Tariff and load control equipment
156
      EN 62054-11:2004            Electricity metering (a.c.) - Tariff and load     FCT   26 164 2004/108/EC MCSI
                                  control -- Part 11: Particular requirements for
157                               electronic ripple control receivers
      EN 62054-21:2004            Electricity metering (a.c.) - Tariff and load     FCT   19 164 2004/108/EC MCSI
                                  control -- Part 21: Particular requirements for
158                               time switches
      EN 50065-2-1:2003/A1:2005   Signalling on low-voltage electrical          NCT        6 207 2004/108/EC MCSI
                                  installations in the frequency range 3 kHz to
                                  148,5 kHz -- Part 2-1: Immunity requirements
                                  for mains communications equipment and
                                  systems operating in the range of frequencies
                                  95 kHz to 148,5 kHz and intended for use in
                                  residential, commercial and light industrial
                                  environments
159
      EN 50065-2-2:2003/A1:2005   Signalling on low-voltage electrical          NCT        6 207 2004/108/EC MCSI
                                  installations in the frequency range 3 kHz to
                                  148,5 kHz -- Part 2-2: Immunity requirements
                                  for mains communications equipment and
                                  systems operating in the range of frequencies
                                  95 kHz to 148,5 kHz and intended for use in
                                  industrial environments
160
      EN 50065-2-3:2003/A1:2005   Signalling on low-voltage electrical          NCT        7 207 2004/108/EC MCSI
                                  installations in the frequency range 3 kHz to
                                  148,5 kHz -- Part 2-3: Immunity requirements
                                  for mains communications equipment and
                                  systems operating in the range of frequencies
                                  3 kHz to 95 kHz and intended for use by
                                  electricity suppliers and distributors
161
      EN 50412-2-1:2005           Power line communication apparatus and            NCT   18 207 2004/108/EC MCSI
                                  systems used in low-voltage installations in
                                  the frequency range 1,6 MHz to 30 MHz --
                                  Part 2-1: Residential, commercial and
                                  industrial environment - Immunity
162                               requirements
      EN 50491-5-1:2010           General requirements for Home and Building        NCT   17 207 2004/108/EC MCSI
                                  Electronic Systems (HBES) and Building
                                  Automation and Control Systems (BACS) --
                                  Part 5-1: EMC requirements, conditions and
163                               test set-up




                                               Pagina 95 din 346
      EN 50491-5-2:2010           General requirements for Home and Building       NCT    13 207 2004/108/EC MCSI
                                  Electronic Systems (HBES) and Building
                                  Automation and Control Systems (BACS) --
                                  Part 5-2: EMC requirements for HBES/BACS
                                  used in residential, commercial and light
164                               industry environment
      EN 50491-5-3:2010           General requirements for Home and Building       NCT     7 207 2004/108/EC MCSI
                                  Electronic Systems (HBES) and Building
                                  Automation and Control Systems (BACS) --
                                  Part 5-3: EMC requirements for HBES/BACS
165                               used in industry environment
      EN 13309:2010               Construction machinery - Electromagnetic         NCT    45 218 2004/108/EC MCSI
                                  compatibility of machines with internal power
166                               supply
      EN 301 406 v2.1.1:2009      Digital Enhanced Cordless                       NCT    118 220 1999/5/EC   MCSI
                                  Telecommunications (DECT);Harmonized EN
                                  for Digital Enhanced Cordless
                                  Telecommunications (DECT) covering the
                                  essential requirements under article 3.2 of the
167                               R&TTE Directive;Generic radio
      EN 301 893 v1.5.1:2008      Broadband Radio Access Networks (BRAN);5 NCT            67 220 1999/5/EC   MCSI
                                  GHz high performance RLAN;Harmonized EN
                                  covering the essential requirements of article
                                  3.2 of the R&TTE Directive
168
      EN 301 908-10 v4.1.1:2009   Electromagnetic compatibility and Radio          NCT   125 220 1999/5/EC   MCSI
                                  spectrum Matters (ERM);Base Stations (BS),
                                  Repeaters and User Equipment (UE) for IMT-
                                  2000 Third-Generation cellular networks;Part
                                  10: Harmonized EN for IMT-2000,
                                  FDMA/TDMA (DECT) covering essential
                                  requirements of article 3.2 of the R&TTE
                                  Directive
169
      EN 302 502 v1.2.1:2008      Broadband Radio Access Networks                  NCT    46 220 1999/5/EC   MCSI
                                  (BRAN);5,8 GHz fixed broadband data
                                  transmitting systems;Harmonized EN
                                  covering the essential requirements of article
170                               3.2 of the R&TTE Directive
      EN 302 544-1 v1.1.2:2010    Broadband Data Transmission Systems              NCT    38 220 1999/5/EC   MCSI
                                  operating in the 2 500 MHz to 2 690 MHz
                                  frequency band;Part 1: TDD Base
                                  Stations;Harmonized EN covering the
                                  essential requirements of article 3.2 of the
171                               R&TTE Directive
      EN 302 544-2 v1.1.1:2009    Broadband Data Transmission Systems              NCT    38 220 1999/5/EC   MCSI
                                  operating in the 2 500 MHz to 2 690 MHz
                                  frequency band;Part 2: TDD User Equipment
                                  Stations;Harmonized EN covering the
                                  essential requirements of article 3.2 of the
172                               R&TTE Directive
      EN 302 567 v1.1.1:2009      Broadband Radio Access Networks                  NCT    29 220 1999/5/EC   MCSI
                                  (BRAN);60 GHz Multiple-Gigabit WAS/RLAN
                                  Systems;Harmonized EN covering the
                                  essential requirements of article 3.2 of the
173                               R&TTE Directive
      EN 302 623 v1.1.1:2009      Broadband Wireless Access Systems (BWA)          NCT    27 220 1999/5/EC   MCSI
                                  in the 3 400 MHz to 3 800 MHz frequency
                                  band;Mobile Terminal Stations;Harmonized
                                  EN covering the essential requirements of
                                  article 3.2 of the R&TTE Directive
174
      EN 303 035-1 v1.2.1:2001    Terrestrial Trunked Radio                        NCT    84 220 1999/5/EC   MCSI
                                  (TETRA);Harmonized EN for TETRA
                                  equipment covering essential requirements
                                  under article 3.2 of the R&TTE Directive;Part
                                  1: Voice plus Data (V+D)
175




                                               Pagina 96 din 346
      EN 303 035-2 v1.2.2:2003     Terrestrial Trunked Radio                        NCT   111 220 1999/5/EC   MCSI
                                   (TETRA);Harmonized EN for TETRA
                                   equipment covering essential requirements
                                   under article 3.2 of the R&TTE Directive;Part
                                   2: Direct Mode Operation (DMO)
176
      EN 302 217-2-2 v1.4.1:2010   Fixed Radio Systems;Characteristics and          NCT    94 267 1999/5/EC   MCSI
                                   requirements for point-to-point equipment and
                                   antennas;Part 2-2: Digital systems operating
                                   in frequency bands where frequency co-
                                   ordination is applied;Harmonized EN covering
                                   the essential requirements of article 3.2 of the
                                   R&TTE Directive
177
      EN 302 217-3 v1.3.1:2009     Fixed Radio Systems;Characteristics and       NCT       60 267 1999/5/EC   MCSI
                                   requirements for point-to-point equipment and
                                   antennas;Part 3: Equipment operating in
                                   frequency bands where both frequency
                                   coordinated or uncoordinated deployment
                                   might be applied;Harmonized EN covering the
                                   essential requirements of article 3.2 of the
                                   R&TTE Directive
178
      EN 302 217-4-2 v1.5.1:2010   Fixed Radio Systems;Characteristics and        NCT      35 267 1999/5/EC   MCSI
                                   requirements for point-to-point equipment and
                                   antennas;Part 4-2: Antennas;Harmonized EN
                                   covering the essential requirements of article
                                   3.2 of the R&TTE Directive
179
      EN 302 326-3 v1.3.1:2008     Fixed Radio Systems;Multipoint Equipment         NCT    40 267 1999/5/EC   MCSI
                                   and Antennas;Part 3: Harmonized EN
                                   covering the essential requirements of article
                                   3.2 of the R&TTE Directive for Multipoint
180                                Radio Antennas
      ETS 300 487/A1 ed1:1997      Satellite Earth Stations and Systems             NCT     5 269 1999/5/EC   MCSI
                                   (SES);Receive-Only Mobile Earth Stations
                                   (ROMES) operating in the 1,5 GHz band
                                   providing data communications;Radio
181                                Frequency (RF) specifications
      EN 300 609-4 v9.2.1:2010     Global System for Mobile communications          NCT    24 269 1999/5/EC   MCSI
                                   (GSM);Part 4: Harmonized EN for GSM
                                   Repeaters covering the essential
                                   requirements of article 3.2 of the R&TTE
182                                Directive
      EN 301 360 v1.2.1:2006       Satellite Earth Stations and Systems             NCT    49 269 1999/5/EC   MCSI
                                   (SES);Harmonized EN for Satellite Interactive
                                   Terminals (SIT) and Satellite User Terminals
                                   (SUT) transmitting towards geostationary
                                   satellites in the 27,5 GHz to 29,5 GHz
                                   frequency bands covering essential
                                   requirements under article 3.2 of the R&TTE
                                   Directive
183
      EN 301 426 v1.2.1:2001       Satellite Earth Stations and Systems        NCT         28 269 1999/5/EC   MCSI
                                   (SES);Harmonized EN for Low data rate Land
                                   Mobile satellite Earth Stations (LMES) and
                                   Maritime Mobile satellite Earth Stations
                                   (MMES) not intended for distress and safety
                                   communications operating in the 1,5/1,6 GHz
                                   frequency bands coveringessential
                                   requirements under article 3.2 of the R&TTE
                                   Directive
184
      EN 301 427 v1.2.1:2001       Satellite Earth Stations and Systems             NCT    41 269 1999/5/EC   MCSI
                                   (SES);Harmonized EN for Low data rate
                                   Mobile satellite Earth Stations (MESs) except
                                   aeronautical mobile satellite earth stations,
                                   operating in the 11/12/14 GHz frequency
                                   bands covering essential requirements under
                                   article 3.2 of the R&TTE directive
185




                                                Pagina 97 din 346
      EN 301 428 v1.3.1:2006   Satellite Earth Stations and Systems               NCT    63 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Very Small
                               Aperture Terminal (VSAT);Transmit-only,
                               transmit/receive or receive-only satellite earth
                               stations operating in the 11/12/14 GHz
                               frequency bands covering essential
                               requirements under article 3.2 of the R&TTE
                               directive
186
      EN 301 430 v1.1.1:2000   Satellite Earth Stations and Systems        FCT           30 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Satellite News
                               Gathering Transportable Earth Stations (SNG
                               TES) operating in the 11-12/13-14 GHz
                               frequency bands covering essential
                               requirements under article 3.2 of the R&TTE
187                            directive
      EN 301 441 v1.1.1:2000   Satellite Earth Stations and Systems               FCT    47 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Mobile Earth
                               Stations (MESs), including handheld earth
                               stations, for Satellite Personal
                               Communications Networks (S-PCN) in the
                               1,6/2,4 GHz bands under the Mobile Satellite
                               Service (MSS) covering essential
                               requirementsunder Article 3.2 of the R&TTE
                               directive
188
      EN 301 442 v1.2.1:2010   Satellite Earth Stations and Systems         NCT          40 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Mobile Earth
                               Stations (MESs), including handheld earth
                               stations, for Satellite Personal
                               Communications Networks (S-PCN) in the 2,0
                               GHz bands under the Mobile Satellite Service
                               (MSS) covering essential requirements
                               underarticle 3.2 of the R&TTE directive
189
      EN 301 443 v1.3.1:2006   Satellite Earth Stations and Systems               NCT    63 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Very Small
                               Aperture Terminal (VSAT);Transmit-only,
                               transmit-and-receive, receive-only satellite
                               earth stations operating in the 4 GHz and 6
                               GHz frequency bands covering essential
                               requirements under article 3.2 of the R&TTE
                               Directive
190
      EN 301 444 v1.1.1:2000   Satellite Earth Stations and Systems         FCT          27 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Land Mobile Earth
                               Stations (LMES) operating in the 1,5 GHz and
                               1,6 GHz bands providing voice and/or data
                               communications covering essential
                               requirements under Article 3.2 of the R&TTE
191                            directive
      EN 301 447 v1.1.1:2007   Satellite Earth Stations and Systems               NCT    64 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for satellite Earth
                               Stations on board Vessels (ESVs) operating
                               in the 4/6 GHz frequency bands allocated to
                               the Fixed Satellite Service (FSS) covering
                               essential requirements of article 3.2 of the
                               R&TTE directive
192
      EN 301 459 v1.4.1:2007   Satellite Earth Stations and Systems               NCT    49 269 1999/5/EC   MCSI
                               (SES);Harmonized EN for Satellite Interactive
                               Terminals (SIT) and Satellite User Terminals
                               (SUT) transmitting towards satellites in
                               geostationary orbit in the 29,5 GHz to 30,0
                               GHz frequency bands covering essential
                               requirements under article 3.2of the R&TTE
                               Directive
193
      EN 301 502 v9.2.1:2010   Global System for Mobile communications            NCT   109 269 1999/5/EC   MCSI
                               (GSM);Harmonized EN for Base Station
                               Equipment covering the essential
                               requirements of article 3.2 of the R&TTE
194                            Directive




                                            Pagina 98 din 346
      EN 301 511 v9.0.2:2003     Global System for Mobile communications         NCT    22 269 1999/5/EC   MCSI
                                 (GSM);Harmonized EN for mobile stations in
                                 the GSM 900 and GSM 1800 bands covering
                                 essential requirements under article 3.2 of the
                                 R&TTE directive (1999/5/EC)
195
      EN 301 681 v1.3.2:2003     Satellite Earth Stations and Systems             NCT   41 269 1999/5/EC   MCSI
                                 (SES);Harmonized EN for Mobile Earth
                                 Stations (MESs) of Geostationary mobile
                                 satellite systems, including handheld earth
                                 stations, for Satellite Personal
                                 Communications Networks (S-PCN) in the
                                 1,5/1,6 GHz bands under the Mobile Satellite
                                 Service(MSS) covering essential
                                 requirements under article 3.2 of the R&TTE
                                 Directive
196
      EN 301 721 v1.2.1:2001     Satellite Earth Stations and Systems             NCT   36 269 1999/5/EC   MCSI
                                 (SES);Harmonized EN for Mobile Earth
                                 Stations (MES) providing Low Bit Rate Data
                                 Communications (LBRDC) using Low Earth
                                 Orbiting (LEO) satellites operating below 1
                                 GHz covering essential requirements under
                                 article 3.2 of the R&TTE directive
197
      EN 302 186 v1.1.1:2004     Satellite Earth Stations and Systems            NCT    56 269 1999/5/EC   MCSI
                                 (SES);Harmonized EN for satellite mobile
                                 Aircraft Earth Stations (AESs) operating in the
                                 11/12/14 GHz frequency bands covering
                                 essential requirements under article 3.2 of the
198                              R&TTE Directive
      EN 302 340 v1.1.1:2006     Satellite Earth Stations and Systems             NCT   61 269 1999/5/EC   MCSI
                                 (SES);Harmonized EN for satellite Earth
                                 Stations on board Vessels (ESVs) operating
                                 in the 11/12/14 GHz frequency bands
                                 allocated to the Fixed Satellite Service (FSS)
                                 covering essential requirements under article
                                 3.2 of the R&TTE directive
199
      EN 302 448 v1.1.1:2007     Satellite Earth Stations and Systems            NCT    45 269 1999/5/EC   MCSI
                                 (SES);Harmonized EN for tracking Earth
                                 Stations on Trains (ESTs) operating in the
                                 14/12 GHz frequency bands covering
                                 essential requirements under article 3.2 of the
200                              R&TTE directive
      EN 302 574-1 v1.1.1:2010   Satellite Earth Stations and Systems          NCT      45 269 1999/5/EC   MCSI
                                 (SES);Harmonized Standard for satellite earth
                                 stations for MSS operating in the 1 980 MHz
                                 to 2 010 MHz (earth-to-space) and 2 170 MHz
                                 to 2 200 MHz (space-to-earth) frequency
                                 bands;Part 1: Complementary Ground
                                 Component (CGC) for wideband systems:
                                 Harmonized EN covering the essential
                                 requirements of article 3.2 of the R&TTE
                                 Directive

201
      EN 302 574-2 v1.1.1:2010   Satellite Earth Stations and Systems             NCT   34 269 1999/5/EC   MCSI
                                 (SES);Harmonized Standard for satellite earth
                                 stations for MSS operating in the 1 980 MHz
                                 to 2 010 MHz (earth-to-space) and 2 170 MHz
                                 to 2 200 MHz (space-to-earth) frequency
                                 bands;Part 2: User Equipment (UE) for
                                 wideband systems: Harmonized EN covering
                                 the essential requirements of article 3.2 of the
                                 R&TTE Directive

202




                                              Pagina 99 din 346
      EN 302 574-3 v1.1.1:2010   Satellite Earth Stations and Systems           NCT       39 269 1999/5/EC     MCSI
                                 (SES);Harmonized Standard for satellite earth
                                 stations for MSS operating in the 1 980 MHz
                                 to 2 010 MHz (earth-to-space) and 2 170 MHz
                                 to 2 200 MHz (space-to- earth) frequency
                                 bands;Part 3: User Equipment (UE) for
                                 narrowband systems: Harmonized EN
                                 covering the essential requirements of article
                                 3.2 of the R&TTE Directive

203
      EN 302 977 v1.1.2:2010     Satellite Earth Stations and Systems             NCT     47 269 1999/5/EC     MCSI
                                 (SES);Harmonized EN for Vehicle-Mounted
                                 Earth Stations (VMES) operating in the 14/12
                                 GHz frequency bands covering the essential
                                 requirements of article 3.2 of the R&TTE
204                              directive
      EN 50401:2006              Product standard to demonstrate the          NCT          7 279 1999/5/EC     MCSI
                                 compliance of fixed equipment for radio
                                 transmission (110 MHz - 40 GHz) intended for
                                 use in wireless telecommunication networks
                                 with the basic restrictions or the reference
                                 levels related to general public exposure to
                                 radio frequency electromagnetic fields, when
                                 put into service
205
      EN 50490:2008              Electrical installations for lighting and        NCT     12 303 2004/108/EC MCSI
                                 beaconing of aerodromes - Technical
                                 requirements for aeronautical ground lighting
                                 control and monitoring systems - Units for
                                 selective switching and monitoring of
206                              individual lamps
      EN 50512:2009              Electrical installations for lighting and        NCT     30 303 2004/108/EC MCSI
                                 beaconing of aerodromes - Advanced Visual
                                 Docking Guidance Systems (A-VDGS)
207
      EN 50293:2000              Electromagnetic compatibility - Road traffic     FCT     11 312 2004/108/EC MCSI
208                              signal systems - Product standard
      EN 13619:2002              Postal services - Mail item processing -         FCT     22 379 97/67/EC      MCSI
                                 Optical characteristics for processing letters
209
      EN 13724:2002              Postal services - Apertures of private letter    FCT     22 379 97/67/EC      MCSI
                                 boxes and letter plates - Requirements and
210                              test methods
      EN 13850:2002+A1:2007      Postal service - Quality of service -             NCT    60 379 97/67/EC      MCSI
                                 Measurement of the transit time of end-to end-
                                 services for single piece priority mail and first
211                              class mail
      EN 14137:2003              Postal services - Quality of service -          FCT      25 379 97/67/EC      MCSI
                                 Measurement of loss of registered mail and
                                 other types of postal service using a track and
212                              trace system
      EN 14142-1:2003            Postal services - Address databases - Part 1: FCT        31 379 97/67/EC      MCSI
213                              Components of postal addresses
      EN 14508:2003+A1:2007      Postal services - Quality of service -          NCT      11 379 97/67/EC      MCSI
                                 Measurement of the transit time of end-to-end
                                 services for single piece non-priority mail and
214                              second class mail
      EN 14534:2003+A1:2007      Postal services - Quality of service -        NCT        64 379 97/67/EC      MCSI
                                 Measurement of the transit time of end-to-end
215                              services for bulk mail
      EN 14615:2005              Postal services - Digital postage marks -        NCT    117 379 97/67/EC      MCSI
216                              Applications, security and design
      EN 331:1998/A1:2010        Manually operated ball valves and closed         NCT     30   89 89/106/EEC   MDRT
                                 bottom taper plug valves for gas installations
217                              for buildings
      EN 459-1:2010              Building lime - Part 1: Definitions,             NCT     48 111 89/106/EEC    MDRT
218                              specifications and conformity criteria
      EN 544:2011                Bitumen shingles with mineral and/or             TR      38 113 89/106/EEC    MDRT
                                 synthetic reinforcements - Product
219                              specification and test methods




                                             Pagina 100 din 346
      EN 15599-1:2010             Thermal insulation products for building          NCT     25 113 89/106/EEC   MDRT
                                  equipment and industrial installations - In-situ
                                  thermal insulation formed from expanded
                                  perlite (EP) products - Part 1: Specification for
                                  bonded and loose-fill products before
220                               installation
      EN 15600-1:2010             Thermal insulation products for building           NCT    23 113 89/106/EEC   MDRT
                                  equipment and industrial installations - In-situ
                                  thermal insulation formed from exfoliated
                                  vermiculite (EV) products - Part 1:
                                  Specification for bonded and loose-fill
221                               products before installation
222 EN 14055:2010                 WC and urinal flushing cisterns                    NCT    44 114 89/106/EEC   MDRT
223 EN 14516:2006+A1:2010         Baths for domestic purposes                        NCT    23 114 89/106/EEC   MDRT
224 EN 14527:2006+A1:2010         Shower trays for domestic purposes                 NCT    21 114 89/106/EEC   MDRT
    EN 1279-5:2005+A2:2010        Glass in building - Insulating glass units - Part NCT     33 122 89/106/EEC   MDRT
225                               5: Evaluation of conformity
    EN 13341:2005+A1:2011         Static thermoplastic tanks for above ground       NCT     38 169 89/106/EEC   MDRT
                                  storage of domestic heating oils, kerosene
                                  and diesel fuels - Blow moulded and
                                  rotationally moulded polyethylene tanks and
                                  rotationally moulded tanks made of anionically
                                  polymerized polyamide 6 - Requirements and
                                  test methods
226
      EN 54-25:2008/AC:2010       Fire detection and fire alarm systems - Part       TR      2 216 89/106/EEC   MDRT
227                               25: Components using radio links
      EN 12094-13:2001/AC:2002    Fixed firefighting systems - Components for        FCT     2 216 89/106/EEC   MDRT
                                  gas extinguishing systems - Part 13:
                                  Requirements and test methods for check
228                               valves and non-return valves
      EN 15821:2010               Multi-firing sauna stoves fired by natural wood NCT       54 305 89/106/EEC   MDRT
                                  logs - Requirements and test methods
229
      EN 1090-1:2009/AC:2010      Execution of steel structures and aluminium        TR      2 326 89/106/EEC   MDRT
                                  structures - Part 1: Requirements for
                                  conformity assessment of structural
230                               components
      EN 14229:2010               Structural timber - Wood poles for overhead        NCT    40 326 89/106/EEC   MDRT
231                               lines
      EN 15275:2007/AC:2010       Structural adhesives - Characterisation of         TR      4 338 89/106/EEC   MDRT
                                  anaerobic adhesives for co-axial metallic
                                  assembly in building and civil engineering
232                               structures
233 EN 15129:2009                 Anti-seismic devices                               NCT   159 343 89/106/EEC   MDRT
    EN 998-1:2010                 Specification for mortar for masonry - Part 1: NCT        24 347 89/106/EEC   MDRT
234                               Rendering and plastering mortar
    EN 998-2:2010                 Specification for mortar for masonry - Part 2: NCT        28 347 89/106/EEC   MDRT
235                               Masonry mortar
    EN 1857:2010                  Chimneys - Components - Concrete flue liners NCT          49 347 89/106/EEC   MDRT
236
    EN 1858:2008+A1:2011          Chimneys - Components - Concrete flue              TR     55 347 89/106/EEC   MDRT
237                               blocks
    EN 12446:2011                 Chimneys - Components - Concrete outer wall        TR     33 347 89/106/EEC   MDRT
238                               elements
    EN 60034-1:2010               Rotating electrical machines -- Part 1: Rating     TR     76   1 2006/95/EC   MECMA
239                               and performance
    EN 61869-1:2009               Instrument transformers -- Part 1: General         NCT    70   8 2006/95/EC   MECMA
240                               requirements
    EN 60947-1:2007/A1:2011       Low-voltage switchgear and controlgear --          TR     43   9 2006/95/EC   MECMA
241                               Part 1: General rules
    EN 60947-4-1:2010             Low-voltage switchgear and controlgear --          NCT   131   9 2006/95/EC   MECMA
                                  Part 4-1: Contactors and motor-starters -
                                  Electromechanical contactors and motor-
242                               starters
      EN 60947-5-1:2004/A1:2009   Low-voltage switchgear and controlgear --       NCT       18   9 2006/95/EC   MECMA
                                  Part 5-1: Control circuit devices and switching
                                  elements - Electromechanical control circuit
243                               devices
      EN 61439-1:2009             Low-voltage switchgear and controlgear             NCT   143   9 2006/95/EC   MECMA
244                               assemblies -- Part 1: General rules




                                               Pagina 101 din 346
      EN 61439-2:2009              Low-voltage switchgear and controlgear              NCT    26    9 2006/95/EC   MECMA
                                   assemblies -- Part 2: Power switchgear and
245                                controlgear assemblies
      EN 61439-5:2011              Low-voltage switchgear and controlgear              TR     31    9 2006/95/EC   MECMA
                                   assemblies -- Part 5: Assemblies for power
246                                distribution in public networks
      EN 62026-3:2009              Low-voltage switchgear and controlgear -            NCT   122    9 2006/95/EC   MECMA
                                   Controller-device interfaces (CDIs) -- Part 3:
247                                DeviceNet
      HD 639 S1:2002/A2:2010       Electrical accessories - Portable residual          TR      3   11 2006/95/EC   MECMA
                                   current devices without integral overcurrent
                                   protection for household and similar use
248                                (PRCDs)
      EN 50085-2-3:2010            Cable trunking systems and cable ducting            NCT    17   11 2006/95/EC   MECMA
                                   systems for electrical installations -- Part 2-3:
                                   Particular requirements for slotted cable
                                   trunking systems intended for installation in
                                   cabinets
249
      EN 50550:2011                Power frequency overvoltage protective              TR     44   11 2006/95/EC   MECMA
                                   device for household and similar applications
250                                (POP)
      EN 60669-2-1:2004/A1:2009    Switches for household and similar fixed            NCT    25   11 2006/95/EC   MECMA
                                   electrical installations -- Part 2-1: Particular
                                   requirements - Electronic switches
251
      EN 60669-2-1:2004/A12:2010   Switches for household and similar fixed            TR      2   11 2006/95/EC   MECMA
                                   electrical installations -- Part 2-1: Particular
                                   requirements - Electronic switches
252
      EN 61008-1:2004/A12:2009     Residual current operated circuit-breakers          NCT     6   11 2006/95/EC   MECMA
                                   without integral overcurrent protection for
                                   household and similar uses (RCCB's) -- Part
253                                1: General rules
      EN 61009-1:2004/A11:2008     Residual current operated circuit-breakers          NCT    22   11 2006/95/EC   MECMA
                                   with integral overcurrent protection for
                                   household and similar uses (RCBO's) -- Part
254                                1: General rules
      EN 61009-1:2004/A12:2009     Residual current operated circuit-breakers          NCT     6   11 2006/95/EC   MECMA
                                   with integral overcurrent protection for
                                   household and similar uses (RCBO's) -- Part
255                                1: General rules
      EN 61009-1:2004/A13:2009     Residual current operated circuit-breakers          NCT     5   11 2006/95/EC   MECMA
                                   with integral overcurrent protection for
                                   household and similar uses (RCBO's) -- Part
256                                1: General rules
      EN 61058-2-1:2011            Switches for appliances -- Part 2-1: Particular     TR     26   11 2006/95/EC   MECMA
257                                requirements for cord switches
      EN 61058-2-5:2011            Switches for appliances -- Part 2-5: Particular     TR     13   11 2006/95/EC   MECMA
                                   requirements for change-over selectors
258
      EN 61210:2010                Connecting devices - Flat quick-connect         TR         41   11 2006/95/EC   MECMA
                                   terminations for electrical copper conductors -
259                                Safety requirements
      EN 61386-21:2004/A11:2010    Conduit systems for cable management --             TR      2   11 2006/95/EC   MECMA
                                   Part 21: Particular requirements - Rigid
260                                conduit systems
      EN 61386-22:2004/A11:2010    Conduit systems for cable management --             TR      2   11 2006/95/EC   MECMA
                                   Part 22: Particular requirements - Pliable
261                                conduit systems
      EN 61386-23:2004/A11:2010    Conduit systems for cable management --             TR      2   11 2006/95/EC   MECMA
                                   Part 23: Particular requirements - Flexible
262                                conduit systems
      EN 61386-24:2010             Conduit systems for cable management --             TR     19   11 2006/95/EC   MECMA
                                   Part 24: Particular requirements - Conduit
263                                systems buried underground
      EN 61534-1:2011              Powertrack systems -- Part 1: General               TR     73   11 2006/95/EC   MECMA
264                                requirements
      EN 61995-1:2008              Devices for the connection of luminaires for        NCT    69   11 2006/95/EC   MECMA
                                   household and similar purposes -- Part 1:
265                                General requirements




                                                Pagina 102 din 346
      EN 62080:2009               Sound signalling devices for household and     NCT         95   11 2006/95/EC   MECMA
266                               similar purposes
      EN 62423:2009               Type B residual current operated circuit-      NCT         43   11 2006/95/EC   MECMA
                                  breakers with and without integral overcurrent
                                  protection for household and similar uses
                                  (Type B RCCBs and Type B RCBOs)
267
      EN 60127-1:2006/A1:2011     Miniature fuses -- Part 1: Definitions for          TR      4   12 2006/95/EC   MECMA
                                  miniature fuses and general requirements for
268                               miniature fuse-links
      HD 60269-2:2010             Low-voltage fuses -- Part 2: Supplementary          TR    188   12 2006/95/EC   MECMA
                                  requirements for fuses for use by authorized
                                  persons (fuses mainly for industrial
                                  application) - Examples of standardized
                                  systems of fuses A to J
269
      HD 60269-3:2010             Low-voltage fuses -- Part 3: Supplementary          TR    159   12 2006/95/EC   MECMA
                                  requirements for fuses for use by unskilled
                                  persons (fuses mainly for household and
                                  similar applications) - Examples of
                                  standardized systems of fuses A to F
270
      EN 60269-6:2011             Low-voltage fuses -- Part 6: Supplementary          TR     32   12 2006/95/EC   MECMA
                                  requirements for fuse-links for the protection
                                  of solar photovoltaic energy systems
271
      EN 60534-2-1:2011           Industrial-process control valves -- Part 2-1:      TR     59   23 2006/95/EC   MECMA
                                  Flow capacity - Sizing equations for fluid flow
272                               under installed conditions
      EN 61010-031:2002/A1:2008   Safety requirements for electrical equipment   NCT         16   24 2006/95/EC   MECMA
                                  for measurement, control and laboratory use --
                                   Part 031: Safety requirements for hand-held
                                  probe assemblies for electrical measurement
                                  and test
273
      EN 61010-1:2010             Safety requirements for electrical equipment   TR         167   24 2006/95/EC   MECMA
                                  for measurement, control, and laboratory use -
                                  - Part 1: General requirements
274
      EN 61010-2-030:2010         Safety requirements for electrical equipment   TR          35   24 2006/95/EC   MECMA
                                  for measurement, control, and laboratory use -
                                  - Part 2-030: Particular requirements for
                                  testing and measuring circuits
275
      EN 60645-6:2010             Electroacoustics - Audiometric equipment --         NCT    19   26 2006/95/EC   MECMA
                                  Part 6: Instruments for the measurement of
276                               otoacoustic emissions
      EN 60645-7:2010             Electroacoustics - Audiometric equipment --         NCT    16   26 2006/95/EC   MECMA
                                  Part 7: Instruments for the measurement of
                                  auditory brainstem responses
277
      EN 60519-1:2011             Safety in electroheating installations -- Part 1:   TR     38   31 2006/95/EC   MECMA
278                               General requirements
      EN 60519-6:2011             Safety in electroheat installations -- Part 6:      TR     32   31 2006/95/EC   MECMA
                                  Specifications for safety in industrial
279                               microwave heating equipment
      EN 62109-1:2010             Safety of power converters for use in         NCT         156   35 2006/95/EC   MECMA
                                  photovoltaic power systems -- Part 1: General
280                               requirements
      EN 61204-7:2006             Low voltage power supplies, d.c. output --          NCT   171   36 2006/95/EC   MECMA
281                               Part 7: Safety requirements
      EN 62310-3:2008             Static transfer systems (STS) -- Part 3:            NCT    55   36 2006/95/EC   MECMA
                                  Method for specifying performance and test
282                               requirements
      EN 60252-1:2011             AC motor capacitors -- Part 1: General -            TR     34   37 2006/95/EC   MECMA
                                  Performance, testing and rating - Safety
                                  requirements - Guidance for installation and
283                               operation
      EN 60252-2:2011             AC motor capacitors -- Part 2: Motor start          TR     47   37 2006/95/EC   MECMA
284                               capacitors




                                               Pagina 103 din 346
      EN 60825-2:2004/A2:2010   Safety of laser products -- Part 2: Safety of     TR    12   38 2006/95/EC   MECMA
                                optical fibre communication systems (OFCS)
285
      EN 60825-4:2006/A2:2011   Safety of laser products -- Part 4: Laser guards TR      9   38 2006/95/EC   MECMA
286
      EN 913:2008               Gymnastic equipment - General safety              NCT   19   66 2001/95/EC   MECMA
287                             requirements and test methods
      EN 916:2003               Gymnastic equipment - Vaulting boxes -            FCT    8   66 2001/95/EC   MECMA
                                Requirements and test methods including
288                             safety
      EN 957-1:2005             Stationary training equipment - Part 1:      NCT        17   66 2001/95/EC   MECMA
                                General safety requirements and test methods
289
      EN 957-2:2003             Stationary training equipment - Part 2:       FCT       12   66 2001/95/EC   MECMA
                                Strength training equipment, additional
                                specific safety requirements and test methods
290
      EN 957-4:2006+A1:2010     Stationary training equipment - Part 4:           NCT    9   66 2001/95/EC   MECMA
                                Strength training benches, additional specific
                                safety requirements and test methods
291
      EN 957-5:2009             Stationary training equipment - Part 5:           NCT   26   66 2001/95/EC   MECMA
                                Stationary exercise bicycles and upper body
                                crank training equipment, additional specific
                                safety requirements and test methods
292
      EN 957-6:2010             Stationary training equipment - Part 6:           NCT   22   66 2001/95/EC   MECMA
                                Treadmills, additional specific safety
293                             requirements and test methods
      EN 957-7:1998             Stationary training equipment - Part 7: Rowing FCT      12   66 2001/95/EC   MECMA
                                machines, additional specific safety
294                             requirements and test methods
      EN 957-8:1998             Stationary training equipment - Part 8:           FCT   11   66 2001/95/EC   MECMA
                                Steppers, stairclimbers and climbers -
                                Additional specific safety requirements and
295                             test methods
      EN 957-9:2003             Stationary training equipment - Part 9:           FCT   12   66 2001/95/EC   MECMA
                                Elliptical trainers, additional specific safety
296                             requirements and test methods
      EN 957-10:2005            Stationary training equipment - Part 10:        NCT     12   66 2001/95/EC   MECMA
                                Exercise bicycles with a fixed wheel or without
                                freewheel, additional specific safety
297                             requirements and test methods
      EN 1651:1999              Paragliding equipment - Harnesses - Safety        FCT   12   66 2001/95/EC   MECMA
298                             requirements and strength tests
      EN 12196:2003             Gymnastic equipment - Horses and bucks -          FCT   10   66 2001/95/EC   MECMA
                                Functional and safety requirements, test
299                             methods
      EN 12197:1997             Gymnastic equipment - Horizontal bars -           FCT    7   66 2001/95/EC   MECMA
300                             Safety requirements and test methods
      EN 12346:1998             Gymnastic equipment - Wall bars, lattice          FCT   10   66 2001/95/EC   MECMA
                                ladders and climbing frames - Safety
301                             requirements and test methods
      EN 12432:1998             Gymnastic equipment - Balancing beams -           FCT    5   66 2001/95/EC   MECMA
                                Functional and safety requirements, test
302                             methods
      EN 12491:2001             Paragliding equipment - Emergency                 FCT   15   66 2001/95/EC   MECMA
                                parachutes - Safety requirements and test
303                             methods
      EN 12655:1998             Gymnastic equipment - Hanging rings -             FCT   11   66 2001/95/EC   MECMA
                                Functional and safety requirements, test
304                             methods
      EN 13319:2000             Diving accessories - Depth gauges and       FCT         10   66 2001/95/EC   MECMA
                                combined depth and time measuring devices -
                                 Functional and safety requirements, test
305                             methods
      EN 13899:2003             Roller sports equipment - Roller skates -         FCT   16   66 2001/95/EC   MECMA
306                             Safety requirements and test methods
      EN 15649-1:2009           Floating leisure articles for use on and in the   NCT   43   66 2001/95/EC   MECMA
                                water - Part 1: Classification, materials,
                                general requirements and test methods
307



                                             Pagina 104 din 346
      EN 15649-2:2009                 Floating leisure articles for use on and in the      NCT    27   66 2001/95/EC   MECMA
308                                   water - Part 2: Consumer information
      EN 15649-3:2009                 Floating leisure articles for use on and in the      NCT    21   66 2001/95/EC   MECMA
                                      water - Part 3: Additional specific safety
                                      requirements and test methods for Class A
309                                   devices
      EN 15649-4:2010                 Floating leisure articles for use on and in the      NCT    32   66 2001/95/EC   MECMA
                                      water - Part 4: Additional specific safety
                                      requirements and test methods for Class B
310                                   devices
      EN 15649-5:2009                 Floating leisure articles for use on and in the      NCT    26   66 2001/95/EC   MECMA
                                      water - Part 5: Additional specific safety
                                      requirements and test methods for Class C
311                                   devices
      EN 15649-6:2009                 Floating leisure articles for use on and in the      NCT    21   66 2001/95/EC   MECMA
                                      water - Part 6: Additional specific safety
                                      requirements and test methods for Class D
312                                   devices
      EN 15649-7:2009                 Floating leisure articles for use on and in the      NCT    32   66 2001/95/EC   MECMA
                                      water - Part 7: Additional specific safety
                                      requirements and test methods for class E
313                                   devices
      EN 14781:2005                   Racing bicycles - Safety requirements and            FCT    80   78 2001/95/EC   MECMA
314                                   test methods
      EN 14872:2006                   Bicycles - Accessories for bicycles - Luggage        NCT    18   78 2001/95/EC   MECMA
315                                   carriers
      EN 81-31:2010                   Safety rules for the construction and                NCT   149   85 2006/42/EC   MECMA
                                      installation of lifts - Lifts for the transport of
                                      goods only - Part 31: Accessible goods only
316                                   lifts
      EN 81-40:2008                   Safety rules for the construction and              NCT      70   85 2006/42/EC   MECMA
                                      installation of lifts - Special lifts for the
                                      transport of persons and goods - Part 40:
                                      Stairlifts and inclined lifting platforms intended
                                      for persons with impaired mobility
317
      EN 81-43:2009                   Safety rules for the construction and           NCT         63   85 2006/42/EC   MECMA
                                      installation of lifts - Special lifts for the
                                      transport of persons and goods - Part 43: Lifts
318                                   for cranes
      EN ISO 3691-5:2009              Industrial trucks - Safety requirements and          NCT    36   85 2006/42/EC   MECMA
                                      verification - Part 5: Pedestrian-propelled
319                                   trucks (ISO 3691-5:2009)
      EN 131-1:2007                   Ladders - Part 1: Terms, types, functional           NCT    25   88 2001/95/EC   MECMA
320                                   sizes
      EN 131-2:2010                   Ladders - Part 2: Requirements, testing,             NCT    36   88 2001/95/EC   MECMA
321                                   marking
      EN 131-1:2007+A1:2011           Ladders - Part 1: Terms, types, functional           TR     25   88 2001/95/EC   MECMA
322                                   sizes
323 EN 131-3:2007                     Ladders - Part 3: User Instructions                  NCT    22   88 2001/95/EC   MECMA
    EN 131-4:2007                     Ladders - Part 4: Single or multiple hinge-joint NCT        17   88 2001/95/EC   MECMA
324                                   ladders
    EN 12778:2002/AC:2003             Cookware - Pressure cookers for domestic         FCT         2   88 97/23/EC     MECMA
325                                   use
326 EN 593:2009+A1:2011               Industrial valves - Metallic butterfly valves    TR         21   89 97/23/EC     MECMA
      EN 1515-4:2009                  Flanges and their joints - Bolting - Part 4:         NCT    19   89 97/23/EC     MECMA
                                      Selection of bolting for equipment subject to
                                      the Pressure Equipment Directive 97/23/EC
327
    EN 1591-1:2001+A1:2009/AC:2010 Flanges and their joints - Design rules for             TR      4   89 97/23/EC     MECMA
                                   gasketed circular flange connections - Part 1:
328                                Calculation method
    EN 1591-1:2001+A1:2009/AC:2011 Flanges and their joints - Design rules for             TR      4   89 97/23/EC     MECMA
                                   gasketed circular flange connections - Part 1:
329                                Calculation method
330 EN 1984:2010                      Industrial valves - Steel gate valves                NCT    14   89 97/23/EC     MECMA
    EN 12516-4:2008                   Industrial valves - Shell design strength - Part     NCT    17   89 97/23/EC     MECMA
                                      4: Calculation method for valve shells
                                      manufactured in metallic materials other than
331                                   steel




                                                   Pagina 105 din 346
      EN 1434-2:2007/AC:2007     Heat meters - Part 2: Constructional             NCT     2 109 2004/22/EC   MECMA
332                              requirements
      EN 1434-4:2007/AC:2007     Heat meters - Part 4: Pattern approval tests     NCT     2 109 2004/22/EC   MECMA
333
      EN 12405-1:2005+A2:2010    Gas meters - Conversion devices - Part 1:        NCT   111 109 2004/22/EC   MECMA
334                              Volume conversion
      EN 14154-1:2005+A2:2011    Water meters - Part 1: General requirements      TR     63 109 2004/22/EC   MECMA
335
      EN 14154-2:2005+A2:2011    Water meters - Part 2: Installation and          TR     40 109 2004/22/EC   MECMA
336                              conditions of use
      EN 14154-3:2005+A2:2011    Water meters - Part 3: Test methods and          TR     86 109 2004/22/EC   MECMA
337                              equipment
      EN 581-1:2006              Outdoor furniture - Seating and tables for       NCT     8 118 2001/95/EC   MECMA
                                 camping, domestic and contract use - Part 1:
338                              General safety requirements
      EN 716-1:2008              Furniture - Children's cots and folding cots for NCT    10 118 2001/95/EC   MECMA
                                 domestic use - Part 1: Safety requirements
339
      EN 716-2:2008              Furniture - Children's cots and folding cots for NCT    32 118 2001/95/EC   MECMA
                                 domestic use - Part 2: Test methods
340
      EN 71-1:2005+A14:2011      Safety of toys - Part 1: Mechanical and          TR    120 125 88/378/EEC   MECMA
341                              physical properties
      EN 71-1:2011               Safety of toys - Part 1: Mechanical and          TR    128 125 2009/48/EC   MECMA
342                              physical properties
      EN 1273:2005               Child use and care articles - Baby walking       FCT    22 125 2001/95/EC   MECMA
                                 frames - Safety requirements and test
343                              methods
      EN 1466:2004+A1:2007       Child care articles - Carry cots and stands -    NCT    29 125 2001/95/EC   MECMA
                                 Safety requirements and test methods
344
      EN 12586:2007+A1:2011      Child use and care articles - Soother holder -   NCT    53 125 2001/95/EC   MECMA
                                 Safety requirements and test methods
345
      EN 14344:2004              Child use and care articles - Child seats for FCT       40 125 2001/95/EC   MECMA
                                 cycles - Safety requirements and test methods
346
      EN 60974-11:2010           Arc welding equipment -- Part 11: Electrode      TR     16 129 2006/95/EC   MECMA
347                              holders
      EN 60974-6:2011            Arc welding equipment -- Part 6: Limited duty    TR     40 129 2006/95/EC   MECMA
348                              equipment
      EN 60730-2-7:2010          Automatic electrical controls for household      TR     32 130 2006/95/EC   MECMA
                                 and similar use -- Part 2-7: Particular
                                 requirements for timers and time switches
349
      EN 60730-2-9:2010          Automatic electrical controls for household   TR        70 130 2006/95/EC   MECMA
                                 and similar use -- Part 2-9: Particular
                                 requirements for temperature sensing controls
350
      EN 60061-1:1993/A43:2010   Lamp caps and holders together with gauges TR           28 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 1: Lamp caps
351
      EN 60061-1:1993/A44:2010   Lamp caps and holders together with gauges TR           15 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 1: Lamp caps
352
      EN 60061-2:1993/A1:1995    Lamp caps and holders together with gauges FCT          58 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
353
      EN 60061-2:1993/A2:1995    Lamp caps and holders together with gauges FCT          43 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
354
      EN 60061-2:1993/A21:2000   Lamp caps and holders together with gauges FCT          17 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
355




                                             Pagina 106 din 346
      EN 60061-2:1993/A22:2001   Lamp caps and holders together with gauges FCT       24 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
356
      EN 60061-2:1993/A23:2001   Lamp caps and holders together with gauges FCT       26 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
357
      EN 60061-2:1993/A24:2001   Lamp caps and holders together with gauges FCT       11 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
358
      EN 60061-2:1993/A25:2002   Lamp caps and holders together with gauges FCT       18 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
359
      EN 60061-2:1993/A26:2002   Lamp caps and holders together with gauges FCT       21 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
360
      EN 60061-2:1993/A27:2002   Lamp caps and holders together with gauges FCT       18 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
361
      EN 60061-2:1993/A28:2003   Lamp caps and holders together with gauges FCT       22 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
362
      EN 60061-2:1993/A29:2003   Lamp caps and holders together with gauges FCT       25 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
363
      EN 60061-2:1993/A3:1995    Lamp caps and holders together with gauges FCT       22 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
364
      EN 60061-2:1993/A30:2003   Lamp caps and holders together with gauges FCT       18 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
365
      EN 60061-2:1993/A31:2004   Lamp caps and holders together with gauges FCT       23 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
366
      EN 60061-2:1993/A32:2005   Lamp caps and holders together with gauges NCT       27 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
367
      EN 60061-2:1993/A33:2005   Lamp caps and holders together with gauges NCT       31 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
368
      EN 60061-2:1993/A34:2006   Lamp caps and holders together with gauges NCT       13 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
369
      EN 60061-2:1993/A35:2007   Lamp caps and holders together with gauges NCT       20 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
370
      EN 60061-2:1993/A36:2007   Lamp caps and holders together with gauges NCT       17 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
371
      EN 60061-2:1993/A37:2008   Lamp caps and holders together with gauges NCT       16 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
372
      EN 60061-2:1993/A38:2009   Lamp caps and holders together with gauges NCT       25 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
373



                                            Pagina 107 din 346
      EN 60061-2:1993/A39:2009   Lamp caps and holders together with gauges NCT        16 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
374
      EN 60061-2:1993/A4:1996    Lamp caps and holders together with gauges FCT        17 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
375
      EN 60061-2:1993/A40:2010   Lamp caps and holders together with gauges TR         26 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
376
      EN 60061-2:1993/A41:2010   Lamp caps and holders together with gauges TR         19 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
377
      EN 60061-2:1993/A5:1996    Lamp caps and holders together with gauges FCT        20 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
378
      EN 60061-2:1993/A6:1996    Lamp caps and holders together with gauges FCT        16 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
379
      EN 60061-2:1993/A7:1997    Lamp caps and holders together with gauges FCT        12 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 2: Lampholders
380
      EN 60061-3:1993/A1:1995    Lamp caps and holders together with gauges FCT       119 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
381
      EN 60061-3:1993/A2:1995    Lamp caps and holders together with gauges FCT        46 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
382
      EN 60061-3:1993/A23:2000   Lamp caps and holders together with gauges FCT        37 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
383
      EN 60061-3:1993/A24:2001   Lamp caps and holders together with gauges FCT        56 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
384
      EN 60061-3:1993/A25:2001   Lamp caps and holders together with gauges FCT        58 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
385
      EN 60061-3:1993/A26:2001   Lamp caps and holders together with gauges FCT        42 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
386
      EN 60061-3:1993/A27:2002   Lamp caps and holders together with gauges FCT        35 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
387
      EN 60061-3:1993/A28:2002   Lamp caps and holders together with gauges FCT        41 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
388
      EN 60061-3:1993/A29:2002   Lamp caps and holders together with gauges FCT        49 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
389
      EN 60061-3:1993/A3:1995    Lamp caps and holders together with gauges FCT        54 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
390
      EN 60061-3:1993/A30:2003   Lamp caps and holders together with gauges FCT        69 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
391



                                             Pagina 108 din 346
      EN 60061-3:1993/A31:2003   Lamp caps and holders together with gauges FCT       45 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
392
      EN 60061-3:1993/A32:2003   Lamp caps and holders together with gauges FCT       41 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
393
      EN 60061-3:1993/A33:2004   Lamp caps and holders together with gauges FCT       78 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
394
      EN 60061-3:1993/A34:2005   Lamp caps and holders together with gauges NCT       44 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
395
      EN 60061-3:1993/A35:2005   Lamp caps and holders together with gauges NCT       32 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
396
      EN 60061-3:1993/A36:2006   Lamp caps and holders together with gauges NCT       15 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
397
      EN 60061-3:1993/A37:2007   Lamp caps and holders together with gauges NCT       49 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
398
      EN 60061-3:1993/A38:2007   Lamp caps and holders together with gauges NCT       39 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
399
      EN 60061-3:1993/A39:2009   Lamp caps and holders together with gauges NCT       46 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
400
      EN 60061-3:1993/A4:1996    Lamp caps and holders together with gauges FCT       48 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
401
      EN 60061-3:1993/A40:2009   Lamp caps and holders together with gauges NCT       39 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
402
      EN 60061-3:1993/A41:2010   Lamp caps and holders together with gauges TR        66 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
403
      EN 60061-3:1993/A42:2010   Lamp caps and holders together with gauges TR        50 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
404
      EN 60061-3:1993/A5:1996    Lamp caps and holders together with gauges FCT       47 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
405
      EN 60061-3:1993/A6:1996    Lamp caps and holders together with gauges FCT       29 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
406
      EN 60061-3:1993/A7:1997    Lamp caps and holders together with gauges FCT       34 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 3: Gauges
407
      EN 60061-4:1992/A1:1995    Lamp caps and holders together with gauges FCT       51 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 4: Guidelines and general information
408
      EN 60061-4:1992/A2:1995    Lamp caps and holders together with gauges FCT       11 131 2006/95/EC   MECMA
                                 for the control of interchangeability and safety -
                                 - Part 4: Guidelines and general information
409



                                             Pagina 109 din 346
      EN 60061-4:1992/A3:1995      Lamp caps and holders together with gauges FCT         17 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
410
      EN 60061-4:1992/A5:1998      Lamp caps and holders together with gauges FCT         14 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
411
      EN 60061-4:1992/A6:2000      Lamp caps and holders together with gauges FCT         11 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
412
      EN 60061-4:1992/A7:2001      Lamp caps and holders together with gauges FCT          8 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
413
      EN 60061-4:1992/A8:2003      Lamp caps and holders together with gauges FCT         23 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
414
      EN 60061-4:1992/A9:2005      Lamp caps and holders together with gauges NCT          8 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
415
      EN 60061-4:1992/A10:2006     Lamp caps and holders together with gauges NCT          9 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
416
      EN 60061-4:1992/A11:2007     Lamp caps and holders together with gauges NCT          7 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
417
      EN 60061-4:1992/A12:2009     Lamp caps and holders together with gauges NCT         15 131 2006/95/EC   MECMA
                                   for the control of interchangeability and safety -
                                   - Part 4: Guidelines and general information
418
419 EN 60238:2004/A2:2011          Edison screw lampholders                        TR      9 131 2006/95/EC   MECMA
    EN 60400:2008/A1:2011          Lampholders for tubular fluorescent lamps       TR     21 131 2006/95/EC   MECMA
420                                and starterholders
    EN 60598-1:2008                Luminaires -- Part 1: General requirements      NCT   209 131 2006/95/EC   MECMA
421                                and tests
    EN 60598-1:2008/A11:2009       Luminaires -- Part 1: General requirements      NCT     3 131 2006/95/EC   MECMA
422                                and tests
    EN 60598-2-14:2009             Luminaires -- Part 2-14: Particular             NCT    28 131 2006/95/EC   MECMA
                                   requirements - Luminaires for cold cathode
                                   tubular discharge lamps (neon tubes) and
423                                similar equipment
      EN 60598-2-20:2010           Luminaires -- Part 2-20: Particular             NCT    27 131 2006/95/EC   MECMA
424                                requirements - Lighting chains
      EN 60598-2-3:2003/A1:2011    Luminaires -- Part 2-3: Particular              TR      7 131 2006/95/EC   MECMA
                                   requirements - Luminaires for road and street
425                                lighting
426 EN 60662:1993/A4:1994          High-pressure sodium vapour lamps               FCT    50 131 2006/95/EC   MECMA
    EN 60838-1:2004/A2:2011        Miscellaneous lampholders -- Part 1: General    TR     10 131 2006/95/EC   MECMA
427                                requirements and tests
428 EN 61184:2008/A1:2011          Bayonet lampholders                             TR     10 131 2006/95/EC   MECMA
      EN 61347-2-12:2005/A1:2010   Lamp controlgear -- Part 2-12: Particular       TR      6 131 2006/95/EC   MECMA
                                   requirements for d.c. or a.c. supplied
                                   electronic ballasts for discharge lamps
429                                (excluding fluorescent lamps)
      EN 61347-1:2008/A1:2011      Lamp controlgear -- Part 1: General and         TR     10 131 2006/95/EC   MECMA
430                                safety requirements
      EN 61347-2-3:2011            Lamp control gear -- Part 2-3: Particular       TR     48 131 2006/95/EC   MECMA
                                   requirements for a.c. and/or d.c. supplied
                                   electronic control gear for fluorescent lamps
431
432 EN 61549:2003/A2:2010          Miscellaneous lamps                             NCT     9 131 2006/95/EC   MECMA
    EN 62493:2010                  Assessment of lighting equipment related to     NCT    43 131 2006/95/EC   MECMA
                                   human exposure to electromagnetic fields
433




                                               Pagina 110 din 346
      EN 62532:2011             Fluorescent induction lamps - Safety         TR           28 131 2006/95/EC   MECMA
434                             specifications
      EN 60079-0:2009           Explosive atmospheres -- Part 0: Equipment - NCT         105 137 94/9/EC      MECMA
435                             General requirements
      EN 60079-1:2007           Explosive atmospheres -- Part 1: Equipment   NCT          80 137 94/9/EC      MECMA
                                protection by flameproof enclosures "d"
436
      EN 60079-2:2007           Explosive atmospheres -- Part 2: Equipment         NCT    61 137 94/9/EC      MECMA
                                protection by pressurized enclosure "p"
437
      EN 60079-7:2007           Explosive atmospheres -- Part 7: Equipment         NCT    85 137 94/9/EC      MECMA
                                protection by increased safety "e"
438
      EN 62013-1:2006           Caplights for use in mines susceptible to          NCT    21 137 94/9/EC      MECMA
                                firedamp -- Part 1: General requirements -
                                Construction and testing in relation to the risk
439                             of explosion
      EN 14276-1:2006+A1:2011   Pressure equipment for refrigerating systems       TR     86 147 97/23/EC     MECMA
                                and heat pumps - Part 1: Vessels - General
440                             requirements
      EN 14276-2:2007+A1:2011   Pressure equipment for refrigerating systems       TR     29 147 97/23/EC     MECMA
                                and heat pumps - Part 2: Piping - General
441                             requirements
      EN 13445-5:2009           Unfired pressure vessels - Part 5: Inspection      NCT    85 152 97/23/EC     MECMA
442                             and testing
443 EN 13445-3:2009             Unfired pressure vessels - Part 3: Design          NCT   834 152 97/23/EC     MECMA
    EN 14359:2006+A1:2010       Gas-loaded accumulators for fluid power         TR        99 152 97/23/EC     MECMA
444                             applications
    EN 15776:2011               Unfired pressure vessels - Requirements for     NCT       39 152 97/23/EC     MECMA
                                the design and fabrication of pressure vessels
                                and pressure parts constructed from cast iron
                                with an elongation after fracture equal or less
                                than 15 %
445
      HD 603 S1:1994            Distribution cables of rated voltage 0,6/1 kV      FCT   716 159 2006/95/EC   MECMA
446
      HD 603 S1:1994/A1:1997    Distribution cables of rated voltage 0,6/1 kV      FCT   283 159 2006/95/EC   MECMA
447
      HD 603 S1:1994/A2:2003    Distribution cables of rated voltage 0,6/1 kV      FCT   372 159 2006/95/EC   MECMA
448
      HD 603 S1:1994/A3:2007    Distribution cables of rated voltage 0,6/1 kV      NCT   679 159 2006/95/EC   MECMA
449
      HD 604 S1:1994            0,6/1 kV and 1,9/3,3 kV power cables with          FCT   481 159 2006/95/EC   MECMA
                                special fire performance for use in power
450                             stations
      HD 604 S1:1994/A1:1997    0,6/1 kV and 1,9/3,3 kV power cables with          FCT   300 159 2006/95/EC   MECMA
                                special fire performance for use in power
451                             stations
      HD 604 S1:1994/A2:2002    0,6/1 kV and 1,9/3,3 kV power cables with          FCT   145 159 2006/95/EC   MECMA
                                special fire performance for use in power
452                             stations
      HD 604 S1:1994/A3:2005    0,6/1 kV and 1,9/3,3 kV power cables with          NCT   264 159 2006/95/EC   MECMA
                                special fire performance for use in power
453                             stations
      HD 626 S1:1996            Overhead distribution cables of rated voltage      FCT   300 159 2006/95/EC   MECMA
454                             Uo/U(Um): 0,6/1 (1,2) kV
      HD 626 S1:1996/A1:1997    Overhead distribution cables of rated voltage      FCT    66 159 2006/95/EC   MECMA
455                             Uo/U(Um): 0,6/1 (1,2) kV
      HD 626 S1:1996/A2:2002    Overhead distribution cables of rated voltage      FCT   134 159 2006/95/EC   MECMA
456                             Uo/U(Um): 0,6/1 (1,2) kV
      HD 627 S1:1996            Multicore and multipair cables for installation    FCT   700 159 2006/95/EC   MECMA
457                             above and below ground
      HD 627 S1:1996/A1:2000    Multicore and multipair cables for installation    FCT    59 159 2006/95/EC   MECMA
458                             above and below ground
      HD 627 S1:1996/A2:2005    Multicore and multipair cables for installation    NCT   186 159 2006/95/EC   MECMA
459                             above and below ground
      EN 50363-0:2011           Insulating, sheathing and covering materials       TR     10 159 2006/95/EC   MECMA
                                for low-voltage energy cables -- Part 0:
460                             General introduction




                                             Pagina 111 din 346
      EN 50363-2-1:2005/A1:2011   Insulating, sheathing and covering materials   TR    3 159 2006/95/EC   MECMA
                                  for low voltage energy cables -- Part 2-1:
                                  Cross-linked elastomeric sheathing
461                               compounds
      EN 50363-3:2005/A1:2011     Insulating, sheathing and covering materials   TR    3 159 2006/95/EC   MECMA
                                  for low voltage energy cables -- Part 3: PVC
462                               insulating compounds
      EN 50363-5:2005/A1:2011     Insulating, sheathing and covering materials   TR    3 159 2006/95/EC   MECMA
                                  for low voltage energy cables -- Part 5:
                                  Halogen-free, cross-linked insulating
463                               compounds
      EN 50363-6:2005/A1:2011     Insulating, sheathing and covering materials   TR    3 159 2006/95/EC   MECMA
                                  for low voltage energy cables -- Part 6:
                                  Halogen-free, cross-linked sheathing
464                               compounds
      EN 50363-8:2005/A1:2011     Insulating, sheathing and covering materials   TR    3 159 2006/95/EC   MECMA
                                  for low voltage energy cables -- Part 8:
                                  Halogen-free, thermoplastic sheathing
465                               compounds
      EN 50395:2005/A1:2011       Electrical test methods for low voltage energy TR    3 159 2006/95/EC   MECMA
466                               cables
      EN 50396:2005/A1:2011       Non electrical test methods for low voltage    TR    3 159 2006/95/EC   MECMA
467                               energy cables
      EN 50525-1:2011             Electric cables - Low voltage energy cables of TR   30 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (U0/U) -- Part 1: General requirements
468
      EN 50525-2-11:2011          Electric cables - Low voltage energy cables of TR   31 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (Uo/U) -- Part 2-11: Cables for general
                                  applications - Flexible cables with
469                               thermoplastic PVC insulation
      EN 50525-2-12:2011          Electric cables - Low voltage energy cables of TR   14 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (Uo/U) -- Part 2-12: Cables for general
                                  applications - Cables with thermoplastic PVC
                                  insulation for extensible leads
470
      EN 50525-2-21:2011          Electric cables - Low voltage energy cables of TR   39 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (Uo/U) -- Part 2-21: Cables for general
                                  applications - Flexible cables with crosslinked
                                  elastomeric insulation
471
      EN 50525-2-22:2011          Electric cables - Low voltage energy cables of TR    9 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (U0/U) -- Part 2-22: Cables for general
                                  applications - High flexibility braided cables
                                  with crosslinked elastomeric insulation
472
      EN 50525-2-31:2011          Electric cables - Low voltage energy cables of TR   13 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (U0/U) -- Part 2-31: Cables for general
                                  applications - Single core non-sheathed
                                  cables with thermoplastic PVC insulation
473
      EN 50525-2-41:2011          Electric cables - Low voltage energy cables of TR   11 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (U0/U) -- Part 2-41: Cables for general
                                  applications - Single core cables with
                                  crosslinked silicone rubber insulation
474
      EN 50525-2-42:2011          Electric cables - Low voltage energy cables of TR    9 159 2006/95/EC   MECMA
                                  rated voltages up to and including 450/750 V
                                  (U0/U) -- Part 2-42: Cables for general
                                  applications - Single core non-sheathed
                                  cables with crosslinked EVA insulation
475




                                              Pagina 112 din 346
      EN 50525-2-51:2011   Electric cables - Low voltage energy cables of TR    15 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-51: Cables for general
                           applications - Oil resistant control cables with
                           thermoplastic PVC insulation
476
      EN 50525-2-71:2011   Electric cables - Low voltage energy cables of TR     8 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-71: Cables for general
                           applications - Flat tinsel cables (cords) with
                           thermoplastic PVC insulation
477
      EN 50525-2-72:2011   Electric cables - Low voltage energy cables of TR     8 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-72: Cables for general
                           applications - Flat divisible cables (cords) with
                           thermoplastic PVC insulation
478
      EN 50525-2-81:2011   Electric cables - Low voltage energy cables of TR    10 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-81: Cables for general
                           applications - Cables with crosslinked
                           elastomeric covering for arc welding
479
      EN 50525-2-82:2011   Electric cables - Low voltage energy cables of TR     9 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-82: Cables for general
                           applications - Cables with crosslinked
                           elastomeric insulation for decorative chains
480
      EN 50525-2-83:2011   Electric cables - Low voltage energy cables of TR    11 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 2-83: Cables for general
                           applications - Multicore cables with
                           crosslinked silicone rubber insulation
481
      EN 50525-3-11:2011   Electric cables - Low voltage energy cables of TR    12 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 3-11: Cables with special fire
                           performance - Flexible cables with halogen-
                           free thermoplastic insulation, and low
                           emission of smoke
482
      EN 50525-3-21:2011   Electric cables - Low voltage energy cables of TR    13 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 3-21: Cables with special fire
                           performance - Flexible cables with halogen-
                           free crosslinked insulation, and low emission
                           of smoke
483
      EN 50525-3-31:2011   Electric cables - Low voltage energy cables of TR    12 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 3-31: Cables with special fire
                           performance - Single core non-sheathed
                           cables with halogen-free thermoplastic
                           insulation, and low emission of smoke
484
      EN 50525-3-41:2011   Electric cables - Low voltage energy cables of TR    10 159 2006/95/EC   MECMA
                           rated voltages up to and including 450/750 V
                           (U0/U) -- Part 3-41: Cables with special fire
                           performance - Single core non-sheathed
                           cables with halogen-free crosslinked
                           insulation, and low emission of smoke
485
      EN 60332-3-10:2009   Tests on electric and optical fibre cables     NCT   29 159 2006/95/EC   MECMA
                           under fire conditions -- Part 3-10: Test for
                           vertical flame spread of vertically-mounted
                           bunched wires or cables - Apparatus
486




                                       Pagina 113 din 346
      EN 60332-3-21:2009        Tests on electric and optical fibre cables       NCT    17 159 2006/95/EC   MECMA
                                under fire conditions -- Part 3-21: Test for
                                vertical flame spread of vertically-mounted
                                bunched wires or cables - Category A F/R
487
      EN 60332-3-22:2009        Tests on electric and optical fibre cables       NCT    19 159 2006/95/EC   MECMA
                                under fire conditions -- Part 3-22: Test for
                                vertical flame spread of vertically-mounted
                                bunched wires or cables - Category A
488
      EN 60332-3-23:2009        Tests on electric and optical fibre cables       NCT    18 159 2006/95/EC   MECMA
                                under fire conditions -- Part 3-23: Test for
                                vertical flame spread of vertically-mounted
                                bunched wires or cables - Category B
489
      EN 60332-3-24:2009        Tests on electric and optical fibre cables       NCT    18 159 2006/95/EC   MECMA
                                under fire conditions -- Part 3-24: Test for
                                vertical flame spread of vertically-mounted
                                bunched wires or cables - Category C
490
      EN 60332-3-25:2009        Tests on electric and optical fibre cables       NCT    17 159 2006/95/EC   MECMA
                                under fire conditions -- Part 3-25: Test for
                                vertical flame spread of vertically-mounted
                                bunched wires or cables - Category D
491
      EN 50290-4-1:2001         Communication cables -- Part 4-1: General        FCT    11 160 2006/95/EC   MECMA
                                considerations for the use of cables -
                                Environmental conditions and safety aspects
492
      EN 50406-1:2004           End user multi-pair cables used in high bit      NCT    15 160 2006/95/EC   MECMA
                                rate telecommunication networks -- Part 1:
493                             Aerial cables
      EN 50406-2:2004           End user multi-pair cables used in high bit      NCT    14 160 2006/95/EC   MECMA
                                rate telecommunication networks -- Part 2:
494                             Duct and buried cables
      EN 50407-1:2004           Multi-pair cables used in high bit rate digital FCT     13 160 2006/95/EC   MECMA
                                access telecommunication networks -- Part 1:
495                             Outdoor cables
      EN 50465:2008             Gas appliances - Fuel cell gas heating           NCT   128 161 2009/142/EC MECMA
                                appliances - Fuel cell gas heating appliance
                                of nominal heat input inferior or equal to 70
496                             kW
      EN 60664-3:2003/A1:2010   Insulation coordination for equipment within     NCT    10 162 2006/95/EC   MECMA
                                low-voltage systems -- Part 3: Use of coating,
                                potting or moulding for protection against
497                             pollution
      HD 368 S1:1978            Direct acting recording electrical measuring     FCT    66 166 2006/95/EC   MECMA
                                instruments and their accessories
498
499 EN 13480-2:2002/A1:2010     Metallic industrial piping - Part 2: Materials   TR     31 169 97/23/EC     MECMA
500 EN 13480-2:2002/A2:2010     Metallic industrial piping - Part 2: Materials   TR     39 169 97/23/EC     MECMA
      EN 13480-3:2002/A4:2010   Metallic industrial piping - Part 3: Design and NCT     20 169 97/23/EC     MECMA
501                             calculation
      EN 12735-1:2010           Copper and copper alloys - Seamless, round NCT          19 171 97/23/EC     MECMA
                                copper tubes for air conditioning and
                                refrigeration - Part 1: Tubes for piping systems
502
      EN 12735-2:2010           Copper and copper alloys - Seamless, round       NCT    23 171 97/23/EC     MECMA
                                copper tubes for air conditioning and
                                refrigeration - Part 2: Tubes for equipment
503
      EN 61243-3:2010           Live working - Voltage detectors -- Part 3:      NCT    77 176 2006/95/EC   MECMA
504                             Two-pole low-voltage type
      EN 45501:1992/AC:1993     Metrological aspects of non-automatic            FCT   106 192 90/384/EEC   MECMA
505                             weighing instruments
      EN 10305-4:2011           Steel tubes for precision applications -         TR     22 202 97/23/EC     MECMA
                                Technical delivery conditions - Part 4:
                                Seamless cold drawn tubes for hydraulic and
506                             pneumatic power systems
      EN 14917:2009             Metal bellows expansion joints for pressure      NCT   200 202 97/23/EC     MECMA
507                             applications




                                             Pagina 114 din 346
      EN 50090-1:2011            Home and Building Electronic Systems               TR     19 207 2006/95/EC   MECMA
                                 (HBES) -- Part 1: Standardization structure
508
      EN 3-8:2006                Portable fire extinguishers - Part 8: Additional   NCT    30 216 97/23/EC     MECMA
                                 requirements to EN 3-7 for the construction,
                                 resistance to pressure and mechanical tests
                                 for extinguishers with a maximum allowable
                                 pressure equal to or lower than 30 bar
509
      EN 3-8:2006/AC:2007        Portable fire extinguishers - Part 8: Additional   NCT     2 216 97/23/EC     MECMA
                                 requirements to EN 3-7 for the construction,
                                 resistance to pressure and mechanical tests
                                 for extinguishers with a maximum allowable
                                 pressure equal to or lower than 30 bar
510
      EN 267:2009                Automatic forced draught burners for liquid        NCT    89 225 97/23/EC     MECMA
511                              fuels
      EN 525:2009                Non-domestic direct gas-fired forced               NCT    79 225 2009/142/EC MECMA
                                 convection air heaters for space heating not
512                              exceeding a net heat input of 300 kW
      EN 12953-6:2011            Shell Boilers - Part 6: Requirements for           NCT    49 225 97/23/EC     MECMA
513                              equipment for the boiler
      EN 14394:2005+A1:2008      Heating boilers - Heating boilers with forced      NCT   129 225 97/23/EC     MECMA
                                 draught burners - Nominal heat output not
                                 exceeding 10 MW and maximum operating
514                              temperature of 110 °C
      EN 15035:2006              Heating boilers - Special requirements for oil     NCT    36 225 92/42/EEC    MECMA
515                              fired room sealed units up to 70 kW
      EN 15420:2010              Gas-fired central heating boilers - Type C         NCT   168 225 2009/142/EC MECMA
                                 boilers of nominal heat input exceeding 70
516                              kW, but not exceeding 1 000 kW
      EN 13138-2:2007            Buoyant aids for swimming instruction - Part       NCT    21 227 2001/95/EC   MECMA
                                 2: Safety requirements and test methods for
517                              buoyant aids to be held
      EN 14139:2010              Ophthalmic optics - Specifications for ready-to- NCT       7 230 93/42/EEC    MECMA
518                              wear spectacles
      EN ISO 9994:2006/A1:2008   Lighters - Safety specification - Amendment 1: NCT         6 231 2001/95/EC   MECMA
                                 Clarification of structural requirements (ISO
                                 9994:2006/Amd 1:2008)
519
      EN 12542:2010              LPG equipment and accessories - Static      NCT           62 231 97/23/EC     MECMA
                                 welded steel cylindrical tanks, serially
                                 produced for the storage of Liquefied
                                 Petroleum Gas (LPG) having a volume not
                                 greater than 13 m3 - Design and manufacture
520
      EN 13869:2002+A1:2011      Lighters - Child-resistance for lighters - Safety TR      16 231 2001/95/EC   MECMA
521                              requirements and test methods
      EN 13121-3:2008+A1:2010    GRP tanks and vessels for use above ground - NCT         233 237 97/23/EC     MECMA
522                               Part 3: Design and workmanship
      EN 60456:2011              Clothes washing machines for household use - TR          191 238 2009/125/EC MECMA
                                  Methods for measuring the performance
523
      EN 60704-2-13:2011         Household and similar electrical appliances -      TR     28 238 2009/125/EC MECMA
                                 Test code for the determination of airborne
                                 acoustical noise -- Part 2-13: Particular
                                 requirements for range hoods
524
      EN 60335-1:2002/A14:2010   Household and similar electrical appliances -      NCT    18 239 2006/95/EC   MECMA
                                 Safety -- Part 1: General requirements
525
      EN 60335-2-108:2008        Household and similar electrical appliances -      NCT    19 239 2006/95/EC   MECMA
                                 Safety -- Part 2-108: Particular requirements
526                              for electrolysers
      EN 60335-2-109:2010        Household and similar electrical appliances -      NCT    21 239 2006/95/EC   MECMA
                                 Safety -- Part 2-109: Particular requirements
                                 for UV radiation water treatment appliances
527
      EN 60335-2-11:2010         Household and similar electrical appliances - NCT         37 239 2006/95/EC   MECMA
                                 Safety -- Part 2-11: Particular requirements for
528                              tumble dryers




                                              Pagina 115 din 346
      EN 60335-2-15:2002/A2:2008    Household and similar electrical appliances - NCT        7 239 2006/95/EC   MECMA
                                    Safety -- Part 2-15: Particular requirements for
                                    appliances for heating liquids
529
      EN 60335-2-16:2003/A1:2008    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-16: Particular requirements for
                                    food waste disposers
530
      EN 60335-2-2:2003/A11:2010    Household and similar electrical appliances -     NCT    8 239 2006/95/EC   MECMA
                                    Safety -- Part 2-2: Particular requirements for
                                    vacuum cleaners and water-suction cleaning
531                                 appliances
      EN 60335-2-21:2003/A2:2008    Household and similar electrical appliances - NCT        6 239 2006/95/EC   MECMA
                                    Safety -- Part 2-21: Particular requirements for
                                    storage water heaters
532
      EN 60335-2-23:2003/A11:2010   Household and similar electrical appliances - NCT        7 239 2006/95/EC   MECMA
                                    Safety -- Part 2-23: Particular requirements for
                                    appliances for skin or hair care
533
      EN 60335-2-24:2010            Household and similar electrical appliances - NCT       62 239 2006/95/EC   MECMA
                                    Safety -- Part 2-24: Particular requirements for
                                    refrigerating appliances, ice-cream appliances
                                    and ice makers
534
      EN 60335-2-25:2002/A11:2010   Household and similar electrical appliances - TR         7 239 2006/95/EC   MECMA
                                    Safety -- Part 2-25: Particular requirements for
                                    microwave ovens, including combination
                                    microwave ovens
535
      EN 60335-2-27:2010            Household and similar electrical appliances - TR        29 239 2006/95/EC   MECMA
                                    Safety -- Part 2-27: Particular requirements for
                                    appliances for skin exposure to ultraviolet and
                                    infrared radiation
536
      EN 60335-2-29:2004/A2:2010    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-29: Particular requirements for
                                    battery chargers
537
      EN 60335-2-3:2002/A11:2010    Household and similar electrical appliances -     NCT    8 239 2006/95/EC   MECMA
                                    Safety -- Part 2-3: Particular requirements for
538                                 electric irons
      EN 60335-2-40:2003/A2:2009    Household and similar electrical appliances - NCT        7 239 2006/95/EC   MECMA
                                    Safety -- Part 2-40: Particular requirements for
                                    electrical heat pumps, air-conditioners and
539                                 dehumidifiers
      EN 60335-2-41:2003/A2:2010    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-41: Particular requirements for
540                                 pumps
      EN 60335-2-42:2003/A1:2008    Household and similar electrical appliances - NCT        6 239 2006/95/EC   MECMA
                                    Safety -- Part 2-42: Particular requirements for
                                    commercial electric forced convection ovens,
                                    steam cookers and steam-convection ovens
541
      EN 60335-2-5:2003/A11:2009    Household and similar electrical appliances -     NCT    4 239 2006/95/EC   MECMA
                                    Safety -- Part 2-5: Particular requirements for
542                                 dishwashers
      EN 60335-2-51:2003/A1:2008    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-51: Particular requirements for
                                    stationary circulation pumps for heating and
                                    service water installations
543
      EN 60335-2-52:2003/A1:2008    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-52: Particular requirements for
                                    oral hygiene appliances
544
      EN 60335-2-52:2003/A11:2010   Household and similar electrical appliances - NCT        8 239 2006/95/EC   MECMA
                                    Safety -- Part 2-52: Particular requirements for
                                    oral hygiene appliances
545




                                                Pagina 116 din 346
      EN 60335-2-59:2003/A2:2009    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-59: Particular requirements for
546                                 insect killers
      EN 60335-2-6:2003/A11:2010    Household and similar electrical appliances -     NCT    9 239 2006/95/EC   MECMA
                                    Safety -- Part 2-6: Particular requirements for
                                    stationary cooking ranges, hobs, ovens and
                                    similar appliances
547
      EN 60335-2-60:2003/A11:2010   Household and similar electrical appliances - NCT        2 239 2006/95/EC   MECMA
                                    Safety -- Part 2-60: Particular requirements for
                                    whirlpool baths and whirlpool spas
548
      EN 60335-2-60:2003/A12:2010   Household and similar electrical appliances - NCT        2 239 2006/95/EC   MECMA
                                    Safety -- Part 2-60: Particular requirements for
                                    whirlpool baths and whirlpool spas
549
      EN 60335-2-7:2003/A11:2010    Household and similar electrical appliances -     NCT    7 239 2006/95/EC   MECMA
                                    Safety -- Part 2-7: Particular requirements for
550                                 washing machines
      EN 60335-2-73:2003/A2:2009    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-73: Particular requirements for
                                    fixed immersion heaters
551
      EN 60335-2-74:2003/A2:2009    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-74: Particular requirements for
                                    portable immersion heaters
552
      EN 60335-2-75:2004/A12:2010   Household and similar electrical appliances - NCT        2 239 2006/95/EC   MECMA
                                    Safety -- Part 2-75: Particular requirements for
                                    commercial dispensing appliances and
                                    vending machines
553
      EN 60335-2-80:2003/A2:2009    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-80: Particular requirements for
554                                 fans
      EN 60335-2-83:2002/A1:2008    Household and similar electrical appliances - NCT        6 239 2006/95/EC   MECMA
                                    Safety -- Part 2-83: Particular requirements for
                                    heated gullies for roof drainage
555
      EN 60335-2-84:2003/A1:2008    Household and similar electrical appliances - NCT        6 239 2006/95/EC   MECMA
                                    Safety -- Part 2-84: Particular requirements for
556                                 toilets
      EN 60335-2-9:2003/A13:2010    Household and similar electrical appliances -     TR     9 239 2006/95/EC   MECMA
                                    Safety -- Part 2-9: Particular requirements for
                                    grills, toasters and similar portable cooking
557                                 appliances
      EN 60335-2-90:2006/A1:2010    Household and similar electrical appliances - TR         8 239 2006/95/EC   MECMA
                                    Safety -- Part 2-90: Particular requirements for
                                    commercial microwave ovens
558
      EN 60335-2-98:2003/A2:2008    Household and similar electrical appliances - NCT        5 239 2006/95/EC   MECMA
                                    Safety -- Part 2-98: Particular requirements for
559                                 humidifiers
560 EN 62115:2005/A2:2011           Electric toys - Safety                            TR    18 239 88/378/EEC   MECMA
    EN 62233:2008                   Measurement methods for electromagnetic           NCT   60 239 2006/95/EC   MECMA
                                    fields of household appliances and similar
                                    apparatus with regard to human exposure
561
      EN 13430:2004                 Packaging - Requirements for packaging          FCT     22 270 94/62/EC     MECMA
562                                 recoverable by material recycling
      EN 50364:2010                 Limitation of human exposure to                 NCT      9 279 2006/95/EC   MECMA
                                    electromagnetic fields from devices operating
                                    in the frequency range 0 Hz to 300 GHz, used
                                    in Electronic Article Surveillance (EAS), Radio
                                    Frequency Identification (RFID) and similar
                                    applications
563
      EN 62311:2008                 Assessment of electronic and electrical           NCT   82 279 2006/95/EC   MECMA
                                    equipment related to human exposure
                                    restrictions for electromagnetic fields (0 Hz -
564                                 300 GHz)




                                                 Pagina 117 din 346
      EN 62479:2010               Assessment of the compliance of low power     TR      23 279 2006/95/EC   MECMA
                                  electronic and electrical equipment with the
                                  basic restrictions related to human exposure
                                  to electromagnetic fields (10 MHz to 300 GHz)

565
      EN 14059:2002               Decorative oil lamps - Safety requirements      FCT   12 298 2001/95/EC   MECMA
566                               and test methods
      EN 30-1-1:2008+A2:2010      Domestic cooking appliances burning gas -       NCT   149 305 2009/142/EC MECMA
567                               Part 1-1: Safety - General
      EN 88-1:2011                Pressure regulators and associated safety       TR    47 305 2009/142/EC MECMA
                                  devices for gas appliances - Part 1: Pressure
                                  regulators for inlet pressures up to and
568                               including 50 kPa
      EN 161:2011                 Automatic shut-off valves for gas burners and   TR    34 305 2009/142/EC MECMA
569                               gas appliances
      EN 257:2010                 Mechanical thermostats for gas-burning          NCT   34 305 2009/142/EC MECMA
570                               appliances
      EN 624:2011                 Specification for dedicated LPG appliances -    TR    58 305 2009/142/EC MECMA
                                  Room sealed LPG space heating equipment
                                  for installation in vehicles and boats
571
      EN 1106:2010                Manually operated taps for gas burning        NCT     32 305 2009/142/EC MECMA
572                               appliances
      EN 1854:2010                Pressure sensing devices for gas burners and NCT      45 305 2009/142/EC MECMA
573                               gas burning appliances
      EN 1860-1:2003              Appliances, solid fuels and firelighters for  FCT     18 305 2001/95/EC   MECMA
                                  barbecueing - Part 1: Barbecues burning solid
                                  fuels - Requirements and test methods
574
      EN 1860-1:2003/A1:2006      Appliances, solid fuels and firelighters for    NCT    4 305 2001/95/EC   MECMA
                                  barbecuing - Part 1: Barbecues burning solid
                                  fuels - Requirements and test methods
575
      EN 61643-11:2002            Low-voltage surge protective devices -- Part   FCT    94 311 2006/95/EC   MECMA
                                  11: Surge protective devices connected to low-
                                  voltage power systems - Requirements and
576                               tests
      EN 61643-11:2002/A11:2007   Low-voltage surge protective devices -- Part   NCT    23 311 2006/95/EC   MECMA
                                  11: Surge protective devices connected to low-
                                  voltage power systems - Requirements and
577                               tests
      EN 61643-21:2001            Low voltage surge protective devices -- Part    FCT   60 311 2006/95/EC   MECMA
                                  21: Surge protective devices connected to
                                  telecommunications and signalling networks -
                                  Performance requirements and testing
578                               methods
      EN 61643-21:2001/A1:2009    Low voltage surge protective devices -- Part    NCT   21 311 2006/95/EC   MECMA
                                  21: Surge protective devices connected to
                                  telecommunications and signalling networks -
                                  Performance requirements and testing
579                               methods
      EN 61558-1:2005/A1:2009     Safety of power transformers, power supplies, NCT      4 312 2006/95/EC   MECMA
                                  reactors and similar products -- Part 1:
580                               General requirements and tests
      EN 61558-2-1:2007           Safety of power transformers, power supplies, NCT     15 312 2006/95/EC   MECMA
                                  reactors and similar products -- Part 2-1:
                                  Particular requirements and tests for
                                  separating transformers and power supplies
                                  incorporating separating transformers for
581                               general applications
      EN 61558-2-16:2009          Safety of transformers, reactors, power supply NCT    39 312 2006/95/EC   MECMA
                                  units and similar products for supply voltages
                                  up to 1 100 V -- Part 2-16: Particular
                                  requirements and tests for switch mode power
                                  supply units and transformers for switch mode
                                  power supply units
582




                                              Pagina 118 din 346
      EN 61558-2-2:2007          Safety of power transformers, power supplies, NCT        17 312 2006/95/EC   MECMA
                                 reactors and similar products -- Part 2-2:
                                 Particular requirements and tests for control
                                 transformers and power supplies
                                 incorporating control transformers
583
      EN 61558-2-23:2010         Safety of transformers, reactors, power supply TR        25 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-23:
                                 Particular requirements and tests for
                                 transformers and power supply units for
584                              construction sites
      EN 61558-2-3:2010          Safety of transformers, reactors, power supply NCT       21 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-3:
                                 Particular requirements and tests for ignition
                                 transformers for gas and oil burners
585
      EN 61558-2-5:2010          Safety of transformers, reactors, power supply NCT       19 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-5:
                                 Particular requirements and tests for
                                 transformer for shavers, power supply units
                                 for shavers and shaver supply units
586
      EN 61558-2-7:2007          Safety of power transformers, power supplies, NCT        21 312 2006/95/EC   MECMA
                                 reactors and similar products -- Part 2-7:
                                 Particular requirements and tests for
                                 transformers and power supplies for toys
587
      EN 61558-2-8:2010          Safety of transformers, reactors, power supply NCT       19 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-8:
                                 Particular requirements and tests for
                                 transformers and power supply units for bells
588                              and chimes
      EN 61558-2-9:2011          Safety of transformers, reactors, power supply TR        17 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-9:
                                 Particular requirements and tests for
                                 transformers and power supply units for class
                                 III handlamps for tungsten filament lamps
589
      EN 61558-2-12:2011         Safety of transformers, reactors, power supply TR        23 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-12:
                                 Particular requirements and tests for constant
                                 voltage transformers and power supply units
                                 for constant voltage
590
      EN 61558-2-20:2011         Safety of transformers, reactors, power supply TR        21 312 2006/95/EC   MECMA
                                 units and combinations thereof -- Part 2-20:
                                 Particular requirements and tests for small
591                              reactors
      EN 50090-1:2011            Home and Building Electronic Systems              NC     19 329 2006/95/EC   MECMA
                                 (HBES) -- Part 1: Standardization structure
592
      EN 334:2005+A1:2009        Gas pressure regulators for inlet pressures up NCT      106 357 97/23/EC     MECMA
593                              to 100 bar
      EN 437:2003+A1:2009        Test gases - Test pressures - Appliance           NCT    42 357 2009/142/EC MECMA
594                              categories
      EN 15001-1:2009            Gas Infrastructure - Gas installation pipework NCT      120 357 97/23/EC     MECMA
                                 with an operating pressure greater than 0,5
                                 bar for industrial installations and greater than
                                 5 bar for industrial and non-industrial
                                 installations - Part 1: Detailed functional
                                 requirements for design, materials,
                                 construction, inspection and testing
595
      EN 60065:2002/A2:2010      Audio, video and similar electronic apparatus -   TR     25 368 2006/95/EC   MECMA
596                               Safety requirements
      EN 60065:2002/A12:2011     Audio, video and similar electronic apparatus -   TR      7 368 2006/95/EC   MECMA
597                               Safety requirements
      EN 60950-1:2006/A1:2010    Information technology equipment - Safety --      NCT    47 368 2006/95/EC   MECMA
598                              Part 1: General requirements
      EN 60950-1:2006/A11:2009   Information technology equipment - Safety --      NCT     9 368 2006/95/EC   MECMA
599                              Part 1: General requirements




                                             Pagina 119 din 346
      EN 60950-1:2006/A12:2011   Information technology equipment - Safety --     TR      8 368 2006/95/EC    MECMA
600                              Part 1: General requirements
      HD 549 S1:1989             Conference systems - Electrical and audio        FCT    46 375 2006/95/EC    MECMA
601                              requirements
      EN 60728-11:2010           Cable networks for television signals, sound     TR     86 375 2006/95/EC    MECMA
                                 signals and interactive services -- Part 11:
602                              Safety
      EN 60204-32:2008           Safety of machinery - Electrical equipment of    NCT   141   23 2006/42/EC   MMFPS
                                 machines -- Part 32: Requirements for
603                              hoisting machines
      EN 60204-33:2011           Safety of machinery - Electrical equipment of    TR    131   23 2006/42/EC   MMFPS
                                 machines -- Part 33: Requirements for
                                 semiconductor fabrication equipment
604
      EN 61496-1:2004/A1:2008    Safety of machinery - Electro-sensitive          NCT    11   23 2006/42/EC   MMFPS
                                 protective equipment -- Part 1: General
605                              requirements and tests
      EN 61800-5-2:2007          Adjustable speed electrical power drive          NCT    70   36 2006/42/EC   MMFPS
                                 systems -- Part 5-2: Safety requirements -
606                              Functional
      EN 710:1997+A1:2010        Safety requirements for foundry moulding and NCT        55   47 2006/42/EC   MMFPS
                                 coremaking machinery and plant associated
607                              equipment
      EN 1247:2004+A1:2010       Foundry machinery - Safety requirements for      NCT    40   47 2006/42/EC   MMFPS
                                 ladles, pouring equipment, centrifugal casting
                                 machines, continuous and semi continuous
                                 casting machines
608
      EN 13675:2004+A1:2010      Safety of machinery - Safety requirements for    NCT    53   47 2006/42/EC   MMFPS
                                 tube forming and rolling mills and their
609                              finishing line equipment
      EN 14656:2006+A1:2010      Safety of machinery - Safety requirements for    NCT    49   47 2006/42/EC   MMFPS
                                 extrusion presses for steel and non-ferrous
610                              metals
      EN 14673:2006+A1:2010      Safety of machinery - Safety requirements for    NCT    48   47 2006/42/EC   MMFPS
                                 hydraulically powered open die hot forging
                                 presses for the forging of steel and non-
611                              ferrous metals
      EN 14677:2008              Safety of machinery - Secondary steelmaking - NCT       52   47 2006/42/EC   MMFPS
                                  Machinery and equipment for treatment of
612                              liquid steel
      EN 14681:2006+A1:2010      Safety of machinery - Safety requirements for    NCT    39   47 2006/42/EC   MMFPS
                                 machinery and equipment for production of
                                 steel by electric arc furnaces
613
      EN 14753:2007              Safety of machinery - Safety requirements for    NCT    45   47 2006/42/EC   MMFPS
                                 machinery and equipment for continuous
614                              casting of steel
      EN 15061:2007+A1:2008      Safety of machinery - Safety requirements for NCT       91   47 2006/42/EC   MMFPS
                                 strip processing line machinery and equipment
615
      EN 15093:2008              Safety of Machinery - Safety requirements for NCT       60   47 2006/42/EC   MMFPS
616                              hot flat rolling mills
      EN 15094:2008              Safety of Machinery - Safety requirements for NCT       63   47 2006/42/EC   MMFPS
617                              cold flat rolling mills
      EN 894-4:2010              Safety of machinery - Ergonomics              NCT       45   54 2006/42/EC   MMFPS
                                 requirements for the design of displays and
                                 control actuators - Part 4: Location and
                                 arrangement of displays and control actuators
618
      EN 564:2006                Mountaineering equipment - Accessory cord - NCT         10   66 89/686/EEC   MMFPS
                                 Safety requirements and test methods
619
      EN 565:2006                Mountaineering equipment - Tape - Safety         NCT     9   66 89/686/EEC   MMFPS
620                              requirements and test methods
      EN 566:2006                Mountaineering equipment - Slings - Safety       NCT     9   66 89/686/EEC   MMFPS
621                              requirements and test methods
      EN 569:2007                Mountaineering equipment - Pitons - Safety       NCT    11   66 89/686/EEC   MMFPS
622                              requirements and test methods
      EN 893:2010                Mountaineering equipment - Crampons -            TR     20   66 89/686/EEC   MMFPS
623                              Safety requirements and test methods




                                             Pagina 120 din 346
      EN 958:2006+A1:2010      Mountaineering equipment - Energy                  NCT   12   66 89/686/EEC   MMFPS
                               absorbing systems for use in klettersteig (via
                               ferrata) climbing - Safety requirements and
624                            test methods
      EN 13089:2011            Mountaineering equipment - Ice-tools - Safety TR         14   66 89/686/EEC   MMFPS
625                            requirements and test methods
      EN 1679-1:1998+A1:2011   Reciprocating internal combustion engines -   NCT        21   76 2006/42/EC   MMFPS
                               Safety - Part 1: Compression ignition engines
626
      EN 12601:2010            Reciprocating internal combustion engine        NCT      34   76 2006/42/EC   MMFPS
627                            driven generating sets - Safety
      EN 609-1:1999+A2:2009    Agricultural and forestry machinery - Safety of NCT      19   77 2006/42/EC   MMFPS
                               log splitters - Part 1: Wedge splitters
628
      EN 609-2:1999+A1:2009    Agricultural and forestry machinery - Safety of NCT      18   77 2006/42/EC   MMFPS
                               log splitters - Part 2: Screw splitters
629
      EN 703:2004+A1:2009      Agricultural machinery - Silage loading,           NCT   35   77 2006/42/EC   MMFPS
                               mixing and/or chopping and distributing
630                            machines - Safety
      EN 707:1999+A1:2009      Agricultural machinery - Slurry tankers - Safety NCT     25   77 2006/42/EC   MMFPS
631
      EN 745:1999+A1:2009      Agricultural machinery - Rotary mowers and         NCT   49   77 2006/42/EC   MMFPS
632                            flail-mowers - Safety
      EN 1374:2000+A1:2010     Agricultural machinery - Silos stationary          NCT   24   77 2006/42/EC   MMFPS
633                            unloaders for round silos - Safety
      EN 1853:1999+A1:2009     Agricultural machinery - Trailers with tipping     NCT   20   77 2006/42/EC   MMFPS
634                            body - Safety
      EN ISO 4254-1:2009       Agricultural machinery - Safety - Part 1:          NCT   40   77 2006/42/EC   MMFPS
635                            General requirements (ISO 4254-1:2008)
      EN ISO 4254-10:2009      Agricultural machinery - Safety - Part 10:         NCT   39   77 2006/42/EC   MMFPS
                               Rotary tedders and rakes (ISO 4254-10:2009)
636
      EN ISO 4254-5:2009       Agricultural machinery - Safety - Part 5:          NCT   19   77 2006/42/EC   MMFPS
                               Power-driven soil-working machines (ISO
637                            4254-5:2008)
      EN ISO 4254-6:2009       Agricultural machinery - Safety - Part 6:          NCT   20   77 2006/42/EC   MMFPS
                               Sprayers and liquid fertilizer distributors (ISO
638                            4254-6:2009)
      EN ISO 4254-7:2009       Agricultural machinery - Safety - Part 7:          NCT   51   77 2006/42/EC   MMFPS
                               Combine harvesters, forage harvesters and
639                            cotton harvesters (ISO 4254-7:2008)
      EN ISO 4254-11:2010      Agricultural machinery - Safety - Part 11: Pick- NCT     18   77 2006/42/EC   MMFPS
640                            up balers (ISO 4254-11:2010)
      EN ISO 10517:2009        Powered hand-held hedge trimmers - Safety        NCT     55   77 2006/42/EC   MMFPS
641                            (ISO 10517:2009)
      EN ISO 11681-1:2008      Machinery for forestry - Portable chain-saw      NCT     25   77 2006/42/EC   MMFPS
                               safety requirements and testing - Part 1:
                               Chain-saws for forest service (ISO 11681-
                               1:2004, including Amd 1:2007)
642
      EN ISO 11681-2:2008      Machinery for forestry - Portable chain-saw        NCT   30   77 2006/42/EC   MMFPS
                               safety requirements and testing - Part 2:
                               Chain-saws for tree service (ISO 11681-
643                            2:2006)
      EN ISO 11806:2008        Agricultural and forestry machinery - Portable     NCT   34   77 2006/42/EC   MMFPS
                               hand-held combustion engine driven brush
                               cutters and grass trimmers - Safety (ISO
644                            11806:1997)
      EN 12525:2000+A2:2010    Agricultural machinery - Front loaders - Safety NCT      28   77 2006/42/EC   MMFPS
645
      EN 13118:2000+A1:2009    Agricultural machinery - Potato harvesting         NCT   33   77 2006/42/EC   MMFPS
646                            equipment - Safety
      EN 13448:2001+A1:2009    Agricultural and forestry machinery - Inter-row    NCT   18   77 2006/42/EC   MMFPS
647                            mowing units - Safety
      EN 13683:2003+A2:2011    Garden equipment - Integrally powered              TR    62   77 2006/42/EC   MMFPS
648                            shredders/chippers - Safety
      EN 13684:2004+A3:2009    Garden equipment - Pedestrian controlled           NCT   51   77 2006/42/EC   MMFPS
649                            lawn aerators and scarifiers - Safety
      EN 14910:2007+A1:2009    Garden equipment - Walk-behind combustion          NCT   49   77 2006/42/EC   MMFPS
                               engine powered trimmers - Safety
650



                                            Pagina 121 din 346
      EN 15503:2009                    Garden equipment - Garden blowers,               NCT   34   77 2006/42/EC   MMFPS
651                                    vacuums and blower/vacuums - Safety
      EN 15695-1:2009                  Agricultural tractors and self-propelled         NCT   30   77 2006/42/EC   MMFPS
                                       sprayers - Protection of the operator (driver)
                                       against hazardous substances - Part 1: Cab
                                       classification, requirements and test
652                                    procedures
      EN 15695-2:2009                  Agricultural tractors and self-propelled         NCT    9   77 2006/42/EC   MMFPS
                                       sprayers - Protection of the operator (driver)
                                       against hazardous substances - Part 2:
                                       Filters, requirements and test procedures
653
      EN 15811:2009                    Agricultural machinery - Guards for moving       NCT   10   77 2006/42/EC   MMFPS
                                       parts of power transmission - Guard opening
                                       with tool (ISO/TS 28923:2007 modified)
654
      EN ISO 22867:2008                Forestry machinery - Vibration test code for     NCT   25   77 2006/42/EC   MMFPS
                                       portable hand-held machines with internal
                                       combustion engine - Vibration at the handles
                                       (ISO 22867:2004, including Cor 1:2006)
655
      EN ISO 22868:2011                Forestry and gardening machinery - Noise      TR       39   77 2006/42/EC   MMFPS
                                       test code for portable hand-held machines
                                       with internal combustion engine - Engineering
                                       method (Grade 2 accuracy) (ISO 22868:2011)
656
      EN ISO 28139:2009                Agricultural and forestry machinery -            NCT   22   77 2006/42/EC   MMFPS
                                       Knapsack combustion-engine-driven
                                       mistblowers - Safety requirements (ISO
657                                    28139:2009)
      EN 201:2009                      Plastics and rubber machines - Injection      NCT      95   79 2006/42/EC   MMFPS
658                                    moulding machines - Safety requirements
      EN 422:2009                      Plastics and rubber machines - Blow           NCT      24   79 2006/42/EC   MMFPS
659                                    moulding machines - Safety requirements
      EN 1114-3:2001+A1:2008           Plastics and rubber machines - Extruders and NCT       27   79 2006/42/EC   MMFPS
                                       extrusion lines - Part 3: Safety requirements
660                                    for haul-offs
      EN 1417:1996+A1:2008/AC:2009     Plastics and rubber machines - Two roll mills - NCT     2   79 2006/42/EC   MMFPS
661                                    Safety requirements
      EN 12012-1:2007+A1:2008          Plastics and rubber machines - Size reduction NCT      26   79 2006/42/EC   MMFPS
                                       machines - Part 1: Safety requirements for
662                                    blade granulators
      EN 12012-3:2001+A1:2008          Plastics and rubber machines - Size reduction NCT      21   79 2006/42/EC   MMFPS
                                       machines - Part 3: Safety requirements for
663                                    shredders
      EN 12012-4:2006+A1:2008          Plastics and rubber machines - Size reduction NCT      22   79 2006/42/EC   MMFPS
                                       machines - Part 4: Safety requirements for
664                                    agglomerators
      EN 12013:2000+A1:2008            Plastics and rubber machines - Internal          NCT   38   79 2006/42/EC   MMFPS
665                                    mixers - Safety requirements
      EN 12301:2000+A1:2008            Plastics and rubber machines - Calenders -       NCT   45   79 2006/42/EC   MMFPS
666                                    Safety requirements
      EN 12409:2008                    Plastics and rubber machines -                   NCT   47   79 2006/42/EC   MMFPS
                                       Thermoforming machines - Safety
667                                    requirements
      EN 12417:2001+A2:2009/AC:2010 Machine tools - Safety - Machining centres          NCT    3   79 2006/42/EC   MMFPS
668
      EN 12622:2009               Safety of machine tools - Hydraulic press             NCT   65   79 2006/42/EC   MMFPS
669                               brakes
    EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines            NCT    2   79 2006/42/EC   MMFPS
670                               (including boring machines)
    EN 13218:2002+A1:2008/AC:2010 Machine tools - Safety - Stationary grinding          NCT    4   79 2006/42/EC   MMFPS
671                               machines
    EN 13418:2004+A1:2008         Plastics and rubber machines - Winding                NCT   47   79 2006/42/EC   MMFPS
                                  machines for film or sheet - Safety
672                               requirements
    EN 13898:2003+A1:2009/AC:2010 Machine tools - Safety - Sawing machines for          NCT    2   79 2006/42/EC   MMFPS
673                               cold metal
    EN 14070:2003+A1:2009/AC:2010 Safety of machine tools - Transfer and special-       NCT    2   79 2006/42/EC   MMFPS
674                               purpose machines




                                                   Pagina 122 din 346
      EN 14886:2008             Plastics and rubber machines - Bandknife           NCT   82   79 2006/42/EC   MMFPS
                                cutting machines for block foams - Safety
675                             requirements
      EN 15067:2007             Plastics and rubber machines - Film                NCT   32   79 2006/42/EC   MMFPS
                                converting machines for bags and sacks -
676                             Safety requirements
      EN ISO 23125:2010         Machine tools - Safety - Turning machines      NCT       78   79 2006/42/EC   MMFPS
677                             (ISO 23125:2010)
      EN 617:2001+A1:2010       Continuous handling equipment and systems - NCT          44   84 2006/42/EC   MMFPS
                                 Safety and EMC requirements for the
                                equipment for the storage of bulk materials in
                                silos, bunkers, bins and hoppers
678
      EN 618:2002+A1:2010       Continuous handling equipment and systems - NCT          67   84 2006/42/EC   MMFPS
                                 Safety and EMC requirements for equipment
                                for mechanical handling of bulk materials
                                except fixed belt conveyors
679
      EN 619:2002+A1:2010       Continuous handling equipment and systems - NCT          77   84 2006/42/EC   MMFPS
                                 Safety and EMC requirements for equipment
                                for mechanical handling of unit loads
680
      EN 620:2002+A1:2010       Continuous handling equipment and systems - NCT          55   84 2006/42/EC   MMFPS
                                 Safety and EMC requirements for fixed belt
681                             conveyors for bulk materials
      EN 741:2000+A1:2010       Continuous handling equipment and systems - NCT          36   84 2006/42/EC   MMFPS
                                 Safety requirements for systems and their
                                components for pneumatic handling of bulk
682                             materials
      EN 81-41:2010             Safety rules for the construction and              NCT   96   85 2006/42/EC   MMFPS
                                installation of lifts - Special lifts for the
                                transport of persons and goods - Part 41:
                                Vertical lifting platforms intended for use by
683                             persons with impaired mobility
      EN 1175-2:1998+A1:2010    Safety of industrial trucks - Electrical           TR    13   85 2006/42/EC   MMFPS
                                requirements - Part 2: General requirements
                                of internal combustion engine powered trucks
684
      EN 1175-1:1998+A1:2010    Safety of industrial trucks - Electrical           NCT   48   85 2006/42/EC   MMFPS
                                requirements - Part 1: General requirements
685                             for battery powered trucks
      EN 1175-3:1998+A1:2010    Safety of industrial trucks - Electrical       NCT       20   85 2006/42/EC   MMFPS
                                requirements - Part 3: Specific requirements
                                for the electric power transmission systems of
                                internal combustion engine powered trucks
686
687 EN 1493:2010                Vehicle lifts                                      TR    63   85 2006/42/EC   MMFPS
    EN 1808:1999+A1:2010        Safety requirements on Suspended Access            NCT   87   85 2006/42/EC   MMFPS
                                Equipment - Design calculations, stability
688                             criteria, construction - Tests
      EN ISO 3266:2010          Forged steel eyebolts grade 4 for general          NCT   20   85 2006/42/EC   MMFPS
689                             lifting purposes (ISO 3266:2010)
      EN 12158-1:2000+A1:2010   Builders' hoists for goods - Part 1: Hoists with   TR    63   85 2006/42/EC   MMFPS
690                             accessible platforms
      EN 12158-2:2000+A1:2010   Builders' hoists for goods - Part 2: Inclined      TR    39   85 2006/42/EC   MMFPS
                                hoists with non-accessible load carrying
691                             devices
      EN 12159:2000+A1:2009     Builders hoists for persons and materials with     NCT   67   85 2006/42/EC   MMFPS
692                             vertically guided cages
693 EN 12999:2011               Cranes - Loader cranes                             NCT   90   85 2006/42/EC   MMFPS
694 EN 13000:2010/AC:2010       Cranes - Mobile cranes                             TR     2   85 2006/42/EC   MMFPS
      EN 13001-2:2011           Crane safety - General design - Part 2: Load       TR    60   85 2006/42/EC   MMFPS
695                             actions
      EN 13135-1:2003+A1:2010   Cranes - Equipment - Part 1: Electrotechnical      NCT   31   85 2006/42/EC   MMFPS
696                             equipment
      EN 13135-2:2004+A1:2010   Cranes - Equipment - Part 2: Non-                  TR    54   85 2006/42/EC   MMFPS
697                             electrotechnical equipment
      EN 13411-4:2011           Terminations for steel wire ropes - Safety -       TR    22   85 2006/42/EC   MMFPS
698                             Part 4: Metal and resin socketing




                                                Pagina 123 din 346
      EN 15000:2008             Safety of industrial trucks - Self propelled     NCT   14   85 2006/42/EC   MMFPS
                                variable reach trucks - Specification,
                                performance and test requirements for
                                longitudinal load moment indicators and
                                longitudinal load moment limiters
699
700 EN 15011:2011               Cranes - Bridge and gantry cranes                NCT   94   85 2006/42/EC   MMFPS
    EN 848-3:2007+A2:2009       Safety of woodworking machines - One side        NCT   88 118 2006/42/EC    MMFPS
                                moulding machines with rotating tools - Part
                                3: Numerically controlled (NC) boring and
701                             routing machines
      EN 859:2007+A1:2009       Safety of woodworking machines - Hand fed        NCT   62 118 2006/42/EC    MMFPS
702                             surface planing machines
      EN 940:2009               Safety of woodworking machines - Combined        NCT   52 118 2006/42/EC    MMFPS
703                             woodworking machines
      EN 1218-2:2004+A1:2009    Safety of woodworking machines - Tenoning        NCT   47 118 2006/42/EC    MMFPS
                                machines - Part 2: Double end tenoning
                                and/or profiling machines fed by chain or
704                             chains
      EN 1807:1999+A1:2009      Safety of woodworking machines - Band        NCT       91 118 2006/42/EC    MMFPS
705                             sawing machines
      EN 1870-17:2007+A2:2009   Safety of woodworking machines - Circular    NCT       51 118 2006/42/EC    MMFPS
                                sawing machines - Part 17: Manual horizontal
                                cutting cross-cut sawing machines with one
                                saw unit (manual radial arm saws)
706
      EN 1870-9:2000+A1:2009    Safety of woodworking machines - Circular        NCT   38 118 2006/42/EC    MMFPS
                                sawing machines - Part 9: Double blade
                                circular sawing machines for cross-cutting
                                with integrated feed and with manual loading
707                             and/or unloading
      EN 1870-8:2001+A1:2009    Safety of woodworking machines - Circular        NCT   55 118 2006/42/EC    MMFPS
                                sawing machines - Part 8: Single blade
                                edging circular rip sawing machines with
                                power driven saw unit and manual loading
708                             and/or unloading
      EN 1870-10:2003+A1:2009   Safety of woodworking machines - Circular        NCT   43 118 2006/42/EC    MMFPS
                                sawing machines - Part 10: Single blade
                                automatic and semi-automatic up-cutting
                                cross-cut sawing machines
709
      EN 1870-11:2003+A1:2009   Safety of woodworking machines - Circular        NCT   43 118 2006/42/EC    MMFPS
                                sawing machines - Part 11: Semi-automatic
                                and automatic horizontal cross-cut sawing
                                machines with one saw unit (radial arm saws)
710
      EN 1870-12:2003+A1:2009   Safety of woodworking machines - Circular        NCT   47 118 2006/42/EC    MMFPS
                                sawing machines - Part 12: Pendulum cross-
711                             cut sawing machines
      EN 1870-13:2007+A1:2009   Safety of woodworking machines - Circular        NCT   72 118 2006/42/EC    MMFPS
                                sawing machines - Part 13: Horizontal beam
712                             panel sawing machines
      EN 1870-14:2007+A1:2009   Safety of woodworking machines - Circular        NCT   61 118 2006/42/EC    MMFPS
                                sawing machines - Part 14: Vertical panel
713                             sawing machines
      EN 50050:2006             Electrical apparatus for potentially explosive   NCT   17 137 94/9/EC       MMFPS
                                atmospheres - Electrostatic hand-held
714                             spraying equipment
      EN 50104:2010             Electrical apparatus for the detection and       NCT   29 137 94/9/EC       MMFPS
                                measurement of oxygen - Performance
715                             requirements and test methods
      EN 50177:2009             Stationary electrostatic application equipment   NCT   24 137 94/9/EC       MMFPS
                                for ignitable coating powders - Safety
716                             requirements
      EN 50223:2010             Stationary electrostatic application equipment   NCT   48 137 2006/42/EC    MMFPS
                                for ignitable flock material - Safety
717                             requirements




                                             Pagina 124 din 346
      EN 50271:2010              Electrical apparatus for the detection and   NCT       28 137 94/9/EC      MMFPS
                                 measurement of combustible gases, toxic
                                 gases or oxygen - Requirements and tests for
                                 apparatus using software and/or digital
718                              technologies
      EN 50495:2010              Safety devices required for the safe           NCT     37 137 94/9/EC      MMFPS
                                 functioning of equipment with respect to
719                              explosion risks
      EN 60079-11:2007           Explosive atmospheres -- Part 11: Equipment    NCT    123 137 94/9/EC      MMFPS
720                              protection by intrinsic safety "i"
      EN 60079-26:2007           Explosive atmospheres -- Part 26: Equipment    NCT     26 137 94/9/EC      MMFPS
                                 with equipment protection level (EPL) Ga
721
      EN 60079-27:2008           Explosive atmospheres -- Part 27: Fieldbus     NCT     17 137 94/9/EC      MMFPS
                                 intrinsically safe concept (FISCO)
722
      EN 60079-28:2007           Explosive atmospheres -- Part 28: Protection NCT       40 137 94/9/EC      MMFPS
                                 of equipment and transmission systems using
723                              optical radiation
      EN 60079-29-1:2007         Explosive atmospheres -- Part 29-1: Gas        NCT     58 137 94/9/EC      MMFPS
                                 detectors - Performance requirements of
724                              detectors for flammable gases
      EN 60079-30-1:2007         Explosive atmospheres -- Part 30-1: Electrical NCT     31 137 94/9/EC      MMFPS
                                 resistance trace heating - General and testing
725                              requirements
      EN 60079-5:2007            Explosive atmospheres -- Part 5: Equipment     NCT     26 137 94/9/EC      MMFPS
726                              protection by powder filling "q"
      EN 60079-6:2007            Explosive atmospheres -- Part 6: Equipment     NCT     20 137 94/9/EC      MMFPS
727                              protection by oil immersion "o"
      EN 60079-15:2010           Explosive atmospheres -- Part 15: Equipment    NCT     82 137 94/9/EC      MMFPS
                                 protection by type of protection "n"
728
      EN 60079-20-1:2010         Explosive atmospheres -- Part 20-1: Material   NCT     80 137 94/9/EC      MMFPS
                                 characteristics for gas and vapour
                                 classification - Test methods and data
729
      EN 60079-25:2010           Explosive atmospheres -- Part 25: Intrinsically NCT    80 137 94/9/EC      MMFPS
730                              safe electrical systems
      EN 60079-29-4:2010         Explosive atmospheres -- Part 29-4: Gas         NCT    42 137 94/9/EC      MMFPS
                                 detectors - Performance requirements of open
731                              path detectors for flammable gases
      EN 61241-11:2006           Electrical apparatus for use in the presence of NCT    21 137 94/9/EC      MMFPS
                                 combustible dust -- Part 11: Protection by
732                              intrinsic safety "iD"
      EN 61241-4:2006            Electrical apparatus for use in the presence of NCT    27 137 94/9/EC      MMFPS
                                 combustible dust -- Part 4: Type of protection
733                              "pD"
      EN ISO/IEC 80079-34:2011   Explosive atmospheres -- Part 34: Application TR      107 137 94/9/EC      MMFPS
                                 of quality systems for equipment manufacture
734
      EN 13977:2011              Railway applications - Track - Safety          NCT     47 146 2006/42/EC   MMFPS
                                 requirements for portable machines and
735                              trolleys for construction and maintenance
      EN 14033-3:2009            Railway applications - Track - Railbound       NCT     49 146 2006/42/EC   MMFPS
                                 construction and maintenance machines -
736                              Part 3: General safety requirements
      EN 15746-2:2010            Railway applications - Track - Road-rail       NCT     68 146 2006/42/EC   MMFPS
                                 machines and associated equipment - Part 2:
737                              General safety requirements
      EN 12693:2008              Refrigerating systems and heat pumps -        NCT      65 147 2006/42/EC   MMFPS
                                 Safety and environmental requirements -
                                 Positive displacement refrigerant compressors
738
      EN 415-3:1999+A1:2009      Safety of packaging machines - Part 3: Form,   NCT     85 148 2006/42/EC   MMFPS
739                              fill and seal machines
      EN 415-5:2006+A1:2009      Safety of packaging machines - Part 5:         NCT    102 148 2006/42/EC   MMFPS
740                              Wrapping machines
      EN 415-8:2008              Safety of packaging machines - Part 8:         NCT     75 148 2006/42/EC   MMFPS
741                              Strapping machines




                                             Pagina 125 din 346
      EN 415-9:2009                   Safety of packaging machines - Part 9: Noise     NCT   29 148 2006/42/EC   MMFPS
                                      measurement methods for packaging
                                      machines, packaging lines and associated
                                      equipment, grade of accuracy 2 and 3
742
      EN 415-6:2006+A1:2009           Safety of packaging machines - Part 6: Pallet NCT      87 148 2006/42/EC   MMFPS
743                                   wrapping machines
      EN 1672-2:2005+A1:2009          Food processing machinery - Basic concepts - NCT       41 148 2006/42/EC   MMFPS
744                                    Part 2: Hygiene requirements
      EN 1678:1998+A1:2010            Food processing machinery - Vegetable         NCT      49 148 2006/42/EC   MMFPS
                                      cutting machines - Safety and hygiene
745                                   requirements
      EN 12042:2005+A1:2010           Food processing machinery - Automatic            TR    49 148 2006/42/EC   MMFPS
                                      dividers - Safety and hygiene requirements
746
      EN 12043:2000+A1:2010           Food processing machinery - Intermediate         TR    49 148 2006/42/EC   MMFPS
                                      provers - Safety and hygiene requirements
747
      EN 12267:2003+A1:2010           Food processing machinery - Circular saw         NCT   34 148 2006/42/EC   MMFPS
                                      machines - Safety and hygiene requirements
748
      EN 12268:2003+A1:2010           Food processing machinery - Band saw             NCT   37 148 2006/42/EC   MMFPS
                                      machines - Safety and hygiene requirements
749
      EN 12331:2003+A2:2010           Food processing machinery - Mincing              NCT   45 148 2006/42/EC   MMFPS
                                      machines - Safety and hygiene requirements
750
      EN 12355:2003+A1:2010           Food processing machinery - Derinding-,          NCT   48 148 2006/42/EC   MMFPS
                                      skinning- and membrane removal machines -
                                      Safety and hygiene requirements
751
      EN 12463:2004+A1:2011           Food processing machinery - Filling machines NCT       61 148 2006/42/EC   MMFPS
                                      and auxiliary machines - Safety and hygiene
752                                   requirements
      EN 12505:2000+A1:2009           Food processing machinery - Centrifugal          NCT   34 148 2006/42/EC   MMFPS
                                      machines for processing edible oils and fats -
753                                   Safety and hygiene requirements
      EN 12851:2005+A1:2010           Food processing machinery - Catering             NCT   42 148 2006/42/EC   MMFPS
                                      attachments for machines having an auxiliary
                                      drive hub - Safety and hygiene requirements
754
      EN 12852:2001+A1:2010           Food processing machinery - Food             NCT       49 148 2006/42/EC   MMFPS
                                      processors and blenders - Safety and hygiene
755                                   requirements
      EN 12853:2001+A1:2010           Food processing machinery - Hand-held            NCT   31 148 2006/42/EC   MMFPS
                                      blenders and whisks - Safety and hygiene
756                                   requirements
    EN 12853:2001+A1:2010/AC:2010 Food processing machinery - Hand-held                TR     3 148 2006/42/EC   MMFPS
                                  blenders and whisks - Safety and hygiene
757                               requirements
    EN 12854:2003+A1:2010         Food processing machinery - Beam mixers -            NCT   42 148 2006/42/EC   MMFPS
758                               Safety and hygiene requirements
    EN 12855:2003+A1:2010         Food processing machinery - Rotating bowl            NCT   40 148 2006/42/EC   MMFPS
                                  cutters - Safety and hygiene requirements
759
    EN 12984:2005+A1:2010         Food processing machinery - Portable and/or          NCT   31 148 2006/42/EC   MMFPS
                                  hand-guided machines and appliances with
                                  mechanically driven cutting tools - Safety and
                                  hygiene requirements
760
      EN 13208:2003+A1:2010           Food processing machinery - Vegetable            NCT   39 148 2006/42/EC   MMFPS
                                      peelers - Safety and hygiene requirements
761
      EN 13288:2005+A1:2009           Food processing machinery - Bowl lifting and     NCT   45 148 2006/42/EC   MMFPS
                                      tilting machines - Safety and hygiene
762                                   requirements
      EN 13389:2005+A1:2009           Food processing machinery - Mixers with          NCT   43 148 2006/42/EC   MMFPS
                                      horizontal shafts - Safety and hygiene
763                                   requirements
      EN 13390:2002+A1:2009           Food processing machinery - Pie and tart         NCT   47 148 2006/42/EC   MMFPS
                                      machines - Safety and hygiene requirements
764



                                                  Pagina 126 din 346
      EN 13534:2006+A1:2010    Food processing machinery - Curing injection       NCT   44 148 2006/42/EC   MMFPS
                               machines - Safety and hygiene requirements
765
      EN 13570:2005+A1:2010    Food processing machinery - Mixing                 NCT   43 148 2006/42/EC   MMFPS
                               machines - Safety and hygiene requirements
766
      EN 13621:2004+A1:2010    Food processing machinery - Salad dryers -         NCT   43 148 2006/42/EC   MMFPS
767                            Safety and hygiene requirements
      EN 13870:2005+A1:2010    Food processing machinery - Chop cutting           NCT   42 148 2006/42/EC   MMFPS
                               machines - Safety and hygiene requirements
768
      EN 13871:2005+A1:2010    Food processing machinery - Cubes cutting          NCT   57 148 2006/42/EC   MMFPS
                               machinery - Safety and hygiene requirements
769
      EN 13885:2005+A1:2010    Food processing machinery - Clipping               NCT   45 148 2006/42/EC   MMFPS
                               machines - Safety and hygiene requirements
770
      EN 13886:2005+A1:2010    Food processing machinery - Cooking kettles        NCT   46 148 2006/42/EC   MMFPS
                               equipped with powered stirrer and/or mixer -
                               Safety and hygiene requirements
771
      EN 13954:2005+A1:2010    Food processing machinery - Bread slicers -  NCT         51 148 2006/42/EC   MMFPS
772                            Safety and hygiene requirements
      EN 14655:2005+A1:2010    Food processing machinery - Baguette slicers NCT         41 148 2006/42/EC   MMFPS
773                            - Safety and hygiene requirements
      EN 14957:2006+A1:2010    Food processing machinery - Dishwashing      NCT         26 148 2006/42/EC   MMFPS
                               machines with conveyor - Safety and hygiene
774                            requirements
      EN 15166:2008            Food processing machinery - Automatic back         NCT   40 148 2006/42/EC   MMFPS
                               splitting machines of butchery carcasses -
                               Safety and hygiene requirements
775
      EN 15774:2010            Food processing machinery - Machines for           NCT   69 148 2006/42/EC   MMFPS
                               processing fresh and filled pasta (tagliatelle,
                               cannelloni, ravioli, tortellini, orecchiette and
                               gnocchi) - Safety and hygiene requirements
776
      EN 930:1997+A2:2009      Footwear, leather and imitation leather goods      NCT   45 154 2006/42/EC   MMFPS
                               manufacturing machines - Roughing,
                               scouring, polishing and trimming machines -
777                            Safety requirements
      EN 931:1997+A2:2009      Footwear manufacturing machines - Lasting     NCT        32 154 2006/42/EC   MMFPS
778                            machines - Safety requirements
      EN 972:1998+A1:2010      Tannery machines - Reciprocating roller       NCT        48 154 2006/42/EC   MMFPS
779                            machines - Safety requirements
      EN 1010-1:2004+A1:2010   Safety of machinery - Safety requirements for NCT        58 154 2006/42/EC   MMFPS
                               the design and construction of printing and
                               paper converting machines - Part 1: Common
                               requirements
780
      EN 1010-2:2006+A1:2010   Safety of machinery - Safety requirements for      NCT   62 154 2006/42/EC   MMFPS
                               the design and construction of printing and
                               paper converting machines - Part 2: Printing
                               and varnishing machines including pre-press
                               machinery
781
      EN 1845:2007             Footwear manufacturing machines - Footwear NCT           82 154 2006/42/EC   MMFPS
                               moulding machines - Safety requirements
782
      EN ISO 8230-1:2008       Safety requirements for dry-cleaning               NCT   37 154 2006/42/EC   MMFPS
                               machines - Part 1: Common safety
783                            requirements (ISO 8230-1:2008)
      EN ISO 8230-2:2008       Safety requirements for dry-cleaning               NCT   10 154 2006/42/EC   MMFPS
                               machines - Part 2: Machines using
784                            perchloroethylene (ISO 8230-2:2008)
      EN ISO 8230-3:2008       Safety requirements for dry-cleaning               NCT   15 154 2006/42/EC   MMFPS
                               machines - Part 3: Machines using
785                            combustible solvents (ISO 8230-3:2008)
      EN ISO 11111-1:2009      Textile machinery - Safety requirements - Part NCT       79 154 2006/42/EC   MMFPS
                               1: Common requirements (ISO 11111-1:2009)
786




                                            Pagina 127 din 346
      EN 12044:2005+A1:2009         Footwear, leather and imitation leather goods     NCT   68 154 2006/42/EC   MMFPS
                                    manufacturing machines - Cutting and
                                    punching machines - Safety requirements
787
      EN 12203:2003+A1:2009         Footwear, leather and imitation leather goods     NCT   84 154 2006/42/EC   MMFPS
                                    manufacturing machines - Shoe and leather
                                    presses - Safety requirements
788
      EN 12387:2005+A1:2009         Footwear, leather and imitation leather goods     NCT   39 154 2006/42/EC   MMFPS
                                    manufacturing machines - Modular shoe
                                    repair equipment - Safety requirements
789
      EN 12653:1999+A2:2009         Footwear, leather and imitation leather           NCT   28 154 2006/42/EC   MMFPS
                                    manufacturing machines - Nailing machines -
790                                 Safety requirements
      EN 13023:2003+A1:2010         Noise measurement methods for printing,           NCT   56 154 2006/42/EC   MMFPS
                                    paper converting, paper making machines
                                    and auxiliary equipment - Accuracy grades 2
791                                 and 3
      EN 13113:2002+A1:2010         Tannery machines - Roller coating machines - NCT        39 154 2006/42/EC   MMFPS
792                                 Safety requirements
      EN 13457:2004+A1:2010         Footwear, leather and imitation leather goods NCT       53 154 2006/42/EC   MMFPS
                                    manufacturing machines - Splitting, skiving,
                                    cutting, cementing and cement drying
                                    machines - Safety requirements
793
      EN 15268:2008                 Petrol filling stations - Safety requirements for NCT   33 169 2006/42/EC   MMFPS
                                    the construction of submersible pump
794                                 assemblies
      EN 60743:2001/A1:2008         Live working - Terminology for tools,             NCT   12 176 89/686/EEC   MMFPS
795                                 equipment and devices
      EN 809:1998+A1:2009/AC:2010   Pumps and pump units for liquids - Common         NCT    2 201 2006/42/EC   MMFPS
796                                 safety requirements
      EN 1829-1:2010                High pressure water jet machines - Safety         NCT   28 201 2006/42/EC   MMFPS
797                                 requirements - Part 1: Machines
      EN 1829-2:2008                High-pressure water jet machines - Safety         NCT   14 201 2006/42/EC   MMFPS
                                    requirements - Part 2: Hoses, hose lines and
798                                 connectors
      EN ISO 20361:2009/AC:2010     Liquid pumps and pump units - Noise test          NCT    2 201 2006/42/EC   MMFPS
                                    code - Grades 2 and 3 of accuracy (ISO
799                                 20361:2007)
      EN 1777:2010                  Hydraulic platforms (HPs) for fire fighting and   NCT   81 216 2006/42/EC   MMFPS
                                    rescue services - Safety requirements and
800                                 testing
      EN 1846-2:2009                Firefighting and rescue service vehicles - Part NCT     57 216 2006/42/EC   MMFPS
                                    2: Common requirements - Safety and
801                                 performance
      EN 13731:2007                 Lifting bag systems for fire and rescue service NCT     29 216 2006/42/EC   MMFPS
                                    use - Safety and performance requirements
802
      EN 14466:2005+A1:2008         Fire-fighting pumps - Portable pumps - Safety NCT       43 216 2006/42/EC   MMFPS
                                    and performance requirements, tests
803
      EN 500-4:2011                 Mobile road construction machinery - Safety -     NCT   59 218 2006/42/EC   MMFPS
                                    Part 4: Specific requirements for compaction
804                                 machines
      EN ISO 3457:2008              Earth-moving machinery - Guards -            NCT        16 218 2006/42/EC   MMFPS
                                    Definitions and requirements (ISO 3457:2003)
805
      EN ISO 3471:2008              Earth-moving machinery - Roll-over protective NCT       38 218 2006/42/EC   MMFPS
                                    structures - Laboratory tests and performance
                                    requirements (ISO 3471:2008)
806
      EN ISO 6682:2008              Earth-moving machinery - Zones of comfort         NCT   16 218 2006/42/EC   MMFPS
                                    and reach for controls (ISO 6682:1986,
807                                 including Amd 1:1989)
      EN 12629-2:2002+A1:2010       Machines for the manufacture of                   TR    14 218 2006/42/EC   MMFPS
                                    constructional products from concrete and
                                    calcium-silicate - Safety - Part 2: Block
808                                 making machines




                                                Pagina 128 din 346
      EN 12629-4:2001+A1:2010     Machines for the manufacture of                  TR    13 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 4:Concrete roof
809                               tile making machines
      EN 12629-1:2000+A1:2010     Machines for the manufacture of                  NCT   28 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 1: Common
810                               requirements
      EN 12629-3:2002+A1:2010     Machines for the manufacture of                  NCT   21 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 3: Slide and
811                               turntable machines
      EN 12629-5-1:2003+A1:2010   Machines for the manufacture of                  NCT   26 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 5-1: Pipe
                                  making machines manufacturing in the
812                               vertical axis
      EN 12629-5-2:2003+A1:2010   Machines for the manufacture of                  NCT   14 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 5-2: Pipe
                                  making machines manufacturing in the
813                               horizontal axis
      EN 12629-5-3:2003+A1:2010   Machines for the manufacture of                  NCT   16 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 5-3: Pipe
814                               prestressing machines
      EN 12629-5-4:2003+A1:2010   Machines for the manufacture of                  NCT   14 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 5-4: Concrete
815                               pipe coating machines
      EN 12629-6:2004+A1:2010     Machines for the manufacture of                  NCT   35 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 6: Stationary
                                  and mobile equipment for the manufacture of
                                  precast reinforced products
816
      EN 12629-7:2004+A1:2010     Machines for the manufacture of                  NCT   88 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 7: Stationary
                                  and mobile equipment for long line
817                               manufacture of prestressed products
      EN 12629-8:2002+A1:2010     Machines for the manufacture of                  NCT   17 218 2006/42/EC   MMFPS
                                  constructional products from concrete and
                                  calcium-silicate - Safety - Part 8: Machines
                                  and equipment for the manufacture of
                                  constructional products from calcium-silicate
818                               (and concrete)
      EN 12649:2008               Concrete compactors and smoothing               NCT    29 218 2006/42/EC   MMFPS
819                               machines - Safety
      EN 13020:2004+A1:2010       Road surface treatment machines - Safety        NCT    28 218 2006/42/EC   MMFPS
820                               requirements
      EN 13035-1:2008             Machines and plants for the manufacture,        NCT    48 218 2006/42/EC   MMFPS
                                  treatment and processing of flat glass - Safety
                                  requirements - Part 1: Storage, handling and
                                  transportation equipment inside the factory
821
      EN 13035-2:2008             Machines and plants for the manufacture,        NCT    24 218 2006/42/EC   MMFPS
                                  treatment and processing of flat glass - Safety
                                  requirements - Part 2: Storage, handling and
                                  transportation equipment outside the factory
822
      EN 13042-1:2007+A1:2009     Machines and plants for the manufacture,         NCT   15 218 2006/42/EC   MMFPS
                                  treatment and processing of hollow glass -
                                  Safety requirements - Part 1: Gob feeder
823
      EN 15027:2007+A1:2009       Transportable wall saw and wire saw              NCT   37 218 2006/42/EC   MMFPS
824                               equipment for job site - Safety
      EN 15059:2009               Snow grooming equipment - Safety                 NCT   25 218 2006/42/EC   MMFPS
825                               requirements
      EN 15162:2008               Machines and plants for mining and tooling of    NCT   26 218 2006/42/EC   MMFPS
                                  natural stone - Safety requirements for gang
826                               saws



                                               Pagina 129 din 346
      EN 15163:2008                 Machines and installations for the exploitation NCT   29 218 2006/42/EC   MMFPS
                                    and processing of natural stone - Safety -
                                    Requirements for diamond wire saws
827
      EN 15164:2008                 Machines and plants for mining and tooling of   NCT   23 218 2006/42/EC   MMFPS
                                    natural stone - Safety - Requirements for
                                    chain- and belt-slotting machines
828
      EN ISO 19432:2008             Building construction machinery and             NCT   42 218 2006/42/EC   MMFPS
                                    equipment - Portable, hand-held, internal
                                    combustion engine driven cut-off machines -
                                    Safety requirements and testing (ISO
829                                 19432:2006)
      EN ISO 4413:2010              Hydraulic fluid power - General rules and       NCT   50 223 2006/42/EC   MMFPS
                                    safety requirements for systems and their
830                                 components (ISO 4413:2010)
      EN ISO 4414:2010              Pneumatic fluid power - General rules and       NCT   42 223 2006/42/EC   MMFPS
                                    safety requirements for systems and their
831                                 components (ISO 4414:2010)
      EN ISO 11161:2007             Safety of machinery - Integrated                NCT   39 223 2006/42/EC   MMFPS
                                    manufacturing systems - Basic requirements
832                                 (ISO 11161:2007)
      EN ISO 11161:2007/A1:2010     Safety of machinery - Integrated             NCT       7 223 2006/42/EC   MMFPS
                                    manufacturing systems - Basic requirements -
                                    Amendment 1 (ISO 11161:2007/Amd 1:2010)
833
      EN ISO 12100:2010             Safety of machinery - General principles for    NCT   81 223 2006/42/EC   MMFPS
                                    design - Risk assessment and risk reduction
834                                 (ISO 12100:2010)
      EN 12198-1:2000+A1:2008       Safety of machinery - Assessment and            NCT   28 223 2006/42/EC   MMFPS
                                    reduction of risks arising from radiation
                                    emitted by machinery - Part 1: General
835                                 principles
      EN 12215:2004+A1:2009         Coating plants - Spray booths for application   NCT   48 223 2006/42/EC   MMFPS
                                    of organic liquid coating materials - Safety
836                                 requirements
      EN 12581:2005+A1:2010         Coating plants - Machinery for dip coating and NCT    61 223 2006/42/EC   MMFPS
                                    electrodeposition of organic liquid coating
                                    material - Safety requirements
837
      EN 12621:2006+A1:2010         Machinery for the supply and circulation of     NCT   34 223 2006/42/EC   MMFPS
                                    coating materials under pressure - Safety
838                                 requirements
      EN 12753:2005+A1:2010         Thermal cleaning systems for exhaust gas        NCT   39 223 2006/42/EC   MMFPS
                                    from surface treatment equipment - Safety
839                                 requirements
      EN 12757-1:2005+A1:2010       Mixing machinery for coating materials -        NCT   32 223 2006/42/EC   MMFPS
                                    Safety requirements - Part 1: Mixing
840                                 machinery for use in vehicle refinishing
      EN 12921-1:2005+A1:2010       Machines for surface cleaning and pre-         NCT    41 223 2006/42/EC   MMFPS
                                    treatment of industrial items using liquids or
                                    vapours - Part 1: Common safety requirements
841
      EN ISO 13849-1:2008/AC:2009   Safety of machinery - Safety-related parts of   NCT    4 223 2006/42/EC   MMFPS
                                    control systems - Part 1: General principles
                                    for design (ISO 13849-1:2006/Cor 1:2009)
842
      EN ISO 13849-2:2008           Safety of machinery - Safety-related parts of   NCT   55 223 2006/42/EC   MMFPS
                                    control systems - Part 2: Validation (ISO
843                                 13849-2:2003)
      EN ISO 13855:2010             Safety of machinery - Positioning of            NCT   43 223 2006/42/EC   MMFPS
                                    safeguards with respect to the approach
                                    speeds of parts of the human body (ISO
844                                 13855:2010)
      EN ISO 13857:2008             Safety of machinery - Safety distances to   NCT       22 223 2006/42/EC   MMFPS
                                    prevent hazard zones being reached by upper
                                    and lower limbs (ISO 13857:2008)
845




                                                Pagina 130 din 346
      EN ISO 14122-1:2001/A1:2010   Safety of machinery - Permanent means of           NCT     7 223 2006/42/EC   MMFPS
                                    access to machinery - Part 1: Choice of fixed
                                    means of access between two levels -
                                    Amendment 1 (ISO 14122-1:2001/Amd
846                                 1:2010)
      EN ISO 14122-2:2001/A1:2010   Safety of machinery - Permanent means of           NCT     7 223 2006/42/EC   MMFPS
                                    access to machinery - Part 2: Working
                                    platforms and walkways - Amendment 1 (ISO
847                                 14122-2:2001/Amd 1:2010)
      EN ISO 14122-3:2001/A1:2010   Safety of machinery - Permanent means of           NCT     7 223 2006/42/EC   MMFPS
                                    access to machinery - Part 3: Stairs,
                                    stepladders and guard-rails - Amendment 1
                                    (ISO 14122-3:2001/Amd 1:2010)
848
      EN ISO 14122-4:2004           Safety of machinery - Permanent means of           NCT    29 223 2006/42/EC   MMFPS
                                    access to machinery - Part 4: Fixed ladders
849                                 (ISO 14122-4:2004)
      EN ISO 14122-4:2004/A1:2010   Safety of machinery - Permanent means of           NCT     9 223 2006/42/EC   MMFPS
                                    access to machinery - Part 4: Fixed ladders -
                                    Amendment 1 (ISO 14122-4:2004/Amd
850                                 1:2010)
      EN ISO 14159:2008             Safety of machinery - Hygiene requirements   NCT          35 223 2006/42/EC   MMFPS
                                    for the design of machinery (ISO 14159:2002)
851
      EN 746-1:1997+A1:2009         Industrial thermoprocessing equipment - Part       NCT    51 225 2006/42/EC   MMFPS
                                    1: Common safety requirements for industrial
852                                 thermoprocessing equipment
      EN 746-2:2010                 Industrial thermoprocessing equipment - Part       NCT   125 225 2006/42/EC   MMFPS
                                    2: Safety requirements for combustion and
853                                 fuel handling systems
      EN 342:2004/AC:2008           Protective clothing - Ensembles and garments NCT           2 227 89/686/EEC   MMFPS
854                                 for protection against cold
      EN 354:2010                   Personal fall protection equipment - Lanyards TR          16 227 89/686/EEC   MMFPS
855
      EN 405:2001+A1:2009           Respiratory protective devices - Valved          NCT      45 227 89/686/EEC   MMFPS
                                    filtering half masks to protect against gases or
                                    gases and particles - Requirements, testing,
856                                 marking
      EN 421:2010                   Protective gloves against ionizing radiation       NCT    27 227 89/686/EEC   MMFPS
857                                 and radioactive contamination
      EN 530:2010                   Abrasion resistance of protective clothing         TR     10 227 89/686/EEC   MMFPS
858                                 material - Test methods
      EN 1149-5:2008                Protective clothing - Electrostatic properties -   NCT     9 227 89/686/EEC   MMFPS
                                    Part 5: Material performance and design
859                                 requirements
      EN 1497:2007                  Personal fall protection equipment - Rescue    NCT        15 227 89/686/EEC   MMFPS
860                                 harnesses
      EN 1938:2010                  Personal eye protection - Goggles for          TR         33 227 89/686/EEC   MMFPS
861                                 motorcycle and moped users
      EN ISO 9185:2007              Protective clothing - Assessment of            NCT        15 227 89/686/EEC   MMFPS
                                    resistance of materials to molten metal splash
862                                 (ISO 9185:2007)
      EN ISO 10862:2009             Small craft - Quick release system for trapeze     NCT    16 227 89/686/EEC   MMFPS
863                                 harness (ISO 10862:2009)
      EN ISO 11611:2007             Protective clothing for use in welding and         NCT    19 227 89/686/EEC   MMFPS
864                                 allied processes (ISO 11611:2007)
      EN ISO 11612:2008             Protective clothing - Clothing to protect          NCT    29 227 89/686/EEC   MMFPS
865                                 against heat and flame (ISO 11612:2008)
      EN ISO 12127-2:2007           Clothing for protection against heat and flame     NCT    15 227 89/686/EEC   MMFPS
                                    - Determination of contact heat transmission
                                    through protective clothing or constituent
                                    materials - Part 2: Test method using contact
                                    heat produced by dropping small cylinders
                                    (ISO 12127-2:2007)
866
      EN 12254:2010                 Screens for laser working places - Safety          NCT    19 227 2006/42/EC   MMFPS
867                                 requirements and testing
      EN ISO 12402-2:2006/A1:2010   Personal flotation devices - Part 2:               NCT     6 227 89/686/EEC   MMFPS
                                    Lifejackets, performance level 275 - Safety
                                    requirements - Amendment 1 (ISO 12402-
868                                 2:2006/Amd 1:2010)




                                                 Pagina 131 din 346
      EN ISO 12402-3:2006/A1:2010   Personal flotation devices - Part 3:              NCT    6 227 89/686/EEC   MMFPS
                                    Lifejackets, performance level 150 - Safety
                                    requirements - Amendment 1 (ISO 12402-
869                                 3:2006/Amd 1:2010)
      EN ISO 12402-4:2006/A1:2010   Personal flotation devices - Part 4:              NCT    6 227 89/686/EEC   MMFPS
                                    Lifejackets, performance level 100 - Safety
                                    requirements - Amendment 1 (ISO 12402-
870                                 4:2006/Amd 1:2010)
      EN ISO 12402-5:2006/A1:2010   Personal flotation devices - Part 5: Buoyancy     NCT    6 227 89/686/EEC   MMFPS
                                    aids (level 50) - Safety requirements -
                                    Amendment 1 (ISO 12402-5:2006/Amd
871                                 1:2010)
      EN ISO 12402-6:2006/A1:2010   Personal flotation devices - Part 6: Special      NCT    7 227 89/686/EEC   MMFPS
                                    purpose lifejackets and buoyancy aids -
                                    Safety requirements and additional test
                                    methods - Amendment 1 (ISO 12402-
872                                 6:2006/Amd 1:2010)
      EN ISO 12402-8:2006/A1:2011   Personal flotation devices - Part 8:              TR     7 227 89/686/EEC   MMFPS
                                    Accessories - Safety requirements and test
                                    methods - Amendment 1 (ISO 12402-
873                                 8:2006/Amd 1:2011)
      EN ISO 12402-9:2006/A1:2011   Personal flotation devices - Part 9: Test         TR    16 227 89/686/EEC   MMFPS
                                    methods - Amendment 1 (ISO 12402-
874                                 9:2006/Amd 1:2011)
      EN 12941:1998/A2:2008         Respiratory protective devices - Powered          NCT    8 227 89/686/EEC   MMFPS
                                    filtering devices incorporating a helmet or a
                                    hood - Requirements, testing, marking
875
      EN 12942:1998/A2:2008         Respiratory protective devices - Power            NCT    8 227 89/686/EEC   MMFPS
                                    assisted filtering devices incorporating full
                                    face masks, half masks or quarter masks -
876                                 Requirements, testing, marking
      EN 13061:2009                 Protective clothing - Shin guards for             NCT   27 227 89/686/EEC   MMFPS
                                    association football players - Requirements
877                                 and test methods
      EN 13274-7:2008               Respiratory protective devices - Methods of       NCT   18 227 89/686/EEC   MMFPS
                                    test - Part 7: Determination of particle filter
878                                 penetration
      EN 13277-7:2009               Protective equipment for martial arts - Part 7:   NCT   17 227 89/686/EEC   MMFPS
                                    Additional requirements and test methods for
879                                 hand and foot protectors
      EN ISO 13287:2007             Personal protective equipment - Footwear -        NCT   16 227 89/686/EEC   MMFPS
                                    Test method for slip resistance (ISO
880                                 13287:2006)
      EN 13634:2010                 Protective footwear for motorcycle riders -       TR    31 227 89/686/EEC   MMFPS
881                                 Requirements and test methods
      EN ISO 13982-1:2004/A1:2010   Protective clothing for use against solid         NCT    4 227 89/686/EEC   MMFPS
                                    particulates - Part 1: Performance
                                    requirements for chemical protective clothing
                                    providing protection to the full body against
                                    airborne solid particulates (type 5 clothing) -
                                    Amendment 1 (ISO 13982-1:2004/Amd
882                                 1:2010)
      EN ISO 14116:2008             Protective clothing - Protection against heat     NCT   13 227 89/686/EEC   MMFPS
                                    and flame - Limited flame spread materials,
                                    material assemblies and clothing (ISO
883                                 14116:2008)
      EN ISO 14116:2008/AC:2009     Protective clothing - Protection against heat     NCT    4 227 89/686/EEC   MMFPS
                                    and flame - Limited flame spread materials,
                                    material assemblies and clothing - Technical
                                    Corrigendum 1 (ISO 14116:2008/Cor 1:2009)
884
      EN 14126:2003/AC:2004         Protective clothing - Performance             NCT        2 227 89/686/EEC   MMFPS
                                    requirements and tests methods for protective
                                    clothing against infective agents
885
      EN 15333-1:2008               Respiratory equipment - Open-circuit              NCT   57 227 89/686/EEC   MMFPS
                                    umbilical supplied compressed gas diving
886                                 apparatus - Part 1: Demand apparatus
      EN 15333-1:2008/AC:2009       Respiratory equipment - Open-circuit              NCT    2 227 89/686/EEC   MMFPS
                                    umbilical supplied compressed gas diving
887                                 apparatus - Part 1: Demand apparatus



                                                 Pagina 132 din 346
      EN 15333-2:2009             Respiratory equipment - Open-circuit             NCT   54 227 89/686/EEC   MMFPS
                                  umbilical supplied compressed gas diving
888                               apparatus - Part 2: Free flow apparatus
      EN 15613:2008               Knee and elbow protectors for indoor sports -    NCT   11 227 89/686/EEC   MMFPS
                                  Safety requirements and test methods
889
      EN ISO 17491-3:2008         Protective clothing - Test methods for clothing NCT     9 227 89/686/EEC   MMFPS
                                  providing protection against chemicals - Part
                                  3: Determination of resistance to penetration
                                  by a jet of liquid (jet test) (ISO 17491-3:2008)
890
      EN ISO 17491-4:2008         Protective clothing - Test methods for clothing NCT    11 227 89/686/EEC   MMFPS
                                  providing protection against chemicals - Part
                                  4: Determination of resistance to penetration
                                  by a spray of liquid (spray test) (ISO 17491-
891                               4:2008)
      EN ISO 20344:2004/A1:2007   Personal protective equipment - Test             NCT    6 227 89/686/EEC   MMFPS
                                  methods for footwear - Amendment 1 (ISO
892                               20344:2004/Amd 1:2007)
      EN ISO 20345:2004/A1:2007   Personal protective equipment - Safety           NCT    6 227 89/686/EEC   MMFPS
                                  footwear - Amendment 1 (ISO
893                               20345:2004/Amd 1:2007)
      EN ISO 20346:2004/A1:2007   Personal protective equipment - Protective       NCT    6 227 89/686/EEC   MMFPS
                                  footwear - Amendment 1 (ISO
894                               20346:2004/Amd 1:2007)
      EN ISO 20347:2004/A1:2007   Personal protective equipment - Occupational NCT        6 227 89/686/EEC   MMFPS
                                  footwear - Amendment 1 (ISO
895                               20347:2004/Amd 1:2007)
      EN ISO 20349:2010           Personal protective equipment - Footwear    NCT        20 227 89/686/EEC   MMFPS
                                  protecting against thermal risks and molten
                                  metal splashes as found in foundries and
                                  welding - Requirements and test method (ISO
896                               20349:2010)
      EN ISO 11145:2008           Optics and photonics - Lasers and laser-         NCT   34 230 2006/42/EC   MMFPS
                                  related equipment - Vocabulary and symbols
897                               (ISO 11145:2006)
      EN ISO 11252:2008           Lasers and laser-related equipment - Laser       NCT   14 230 2006/42/EC   MMFPS
                                  device - Minimum requirements for
898                               documentation (ISO 11252:2004)
      EN ISO 11553-1:2008         Safety of machinery - Laser processing           NCT   21 230 2006/42/EC   MMFPS
                                  machines - Part 1: General safety
899                               requirements (ISO 11553-1:2005)
      EN ISO 11553-2:2008         Safety of machinery - Laser processing           NCT   25 230 2006/42/EC   MMFPS
                                  machines - Part 2: Safety requirements for
                                  hand-held laser processing devices (ISO
900                               11553-2:2007)
      EN ISO 11554:2008           Optics and photonics - Lasers and laser-         NCT   23 230 2006/42/EC   MMFPS
                                  related equipment - Test methods for laser
                                  beam power, energy and temporal
901                               characteristics (ISO 11554:2006)
      EN 1837:1999+A1:2009        Safety of machinery - Integral lighting of       NCT   11 240 2006/42/EC   MMFPS
902                               machines
      EN 792-1:2000+A1:2008       Hand-held non-electric power tools - Safety      NCT   20 255 2006/42/EC   MMFPS
                                  requirements - Part 1: Assembly power tools
                                  for non-threaded mechanical fasteners
903
      EN 792-5:2000+A1:2008       Hand-held non-electric power tools - Safety     NCT    25 255 2006/42/EC   MMFPS
                                  requirements - Part 5: Rotary percussive drills
904
      EN 792-7:2001+A1:2008       Hand-held non-electric power tools - Safety      NCT   48 255 2006/42/EC   MMFPS
905                               requirements - Part 7: Grinders
      EN 1012-1:2010              Compressors and vacuum pumps - Safety            NCT   39 255 2006/42/EC   MMFPS
                                  requirements - Part 1: Air compressors
906
      EN ISO 11148-3:2010         Hand-held non-electric power tools - Safety      NCT   31 255 2006/42/EC   MMFPS
                                  requirements - Part 3: Drills and tappers (ISO
907                               11148-3:2010)
      EN ISO 11148-4:2010         Hand-held non-electric power tools - Safety      NCT   33 255 2006/42/EC   MMFPS
                                  requirements - Part 4: Non-rotary percussive
                                  power tools (ISO 11148-4:2010)
908




                                              Pagina 133 din 346
      EN ISO 11148-6:2010          Hand-held non-electric power tools - Safety       NCT    36 255 2006/42/EC   MMFPS
                                   requirements - Part 6: Assembly power tools
                                   for threaded fasteners (ISO 11148-6:2010)
909
      EN 15895:2011                Cartridge operated hand-held tools - Safety       TR     48 255 2006/42/EC   MMFPS
                                   requirements - Fixing and hard marking tools
910
      EN 60335-2-77:2010           Safety of household and similar appliances --     NCT    80 255 2006/42/EC   MMFPS
                                   Part 2-77: Particular requirements for
                                   pedestrian-controlled walk-behind electrically
                                   powered lawn mowers
911
      EN 60745-1:2009              Hand-held motor-operated electric tools -        NCT    167 255 2006/42/EC   MMFPS
912                                Safety -- Part 1: General requirements
      EN 60745-2-13:2009           Hand-held motor-operated electric tools -        NCT     42 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-13: Particular requirements for
913                                chain saws
      EN 60745-2-15:2009           Hand-held motor-operated electric tools -        NCT     34 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-15: Particular requirements for
914                                hedge trimmers
      EN 60745-2-19:2009           Hand-held motor-operated electric tools -        NCT     19 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-19: Particular requirements for
915                                jointers
      EN 60745-2-21:2009           Hand-held motor-operated electric tools -        NCT     14 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-21: Particular requirements for
916                                drain cleaners
      EN 60745-1:2009/A11:2010     Hand-held motor-operated electric tools -         NCT     3 255 2006/42/EC   MMFPS
917                                Safety -- Part 1: General requirements
      EN 60745-2-1:2010            Hand-held motor-operated electric tools -         NCT    29 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-1: Particular requirements for
918                                drills and impact drills
      EN 60745-2-2:2010            Hand-held motor-operated electric tools -         NCT    22 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-2: Particular requirements for
                                   screwdrivers and impact wrenches
919
      EN 60745-2-3:2011            Hand-held motor-operated electric tools -         TR     65 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-3: Particular requirements for
                                   grinders, polishers and disk-type sanders
920
      EN 60745-2-4:2009            Hand-held motor-operated electric tools -         NCT    22 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-4: Particular requirements for
                                   sanders and polishers other than disk type
921
      EN 60745-2-5:2010            Hand-held motor-operated electric tools -         NCT    59 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-5: Particular requirements for
922                                circular saws
      EN 60745-2-6:2010            Hand-held motor-operated electric tools -         NCT    40 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-6: Particular requirements for
923                                hammers
      EN 60745-2-11:2010           Hand-held motor-operated electric tools -        NCT     22 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-11: Particular requirements for
                                   reciprocating saws (jig and sabre saws)
924
      EN 60745-2-13:2009/A1:2010   Hand-held motor-operated electric tools -        NCT      7 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-13: Particular requirements for
925                                chain saws
      EN 60745-2-14:2009           Hand-held motor-operated electric tools -        NCT     24 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-14: Particular requirements for
926                                planers
      EN 60745-2-14:2009/A2:2010   Hand-held motor-operated electric tools -        NCT      8 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-14: Particular requirements for
927                                planers
      EN 60745-2-15:2009/A1:2010   Hand-held motor-operated electric tools -        NCT      6 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-15: Particular requirements for
928                                hedge trimmers
      EN 60745-2-16:2010           Hand-held motor-operated electric tools -        NCT     22 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-16: Particular requirements for
929                                tackers
      EN 60745-2-17:2010           Hand-held motor-operated electric tools -        NCT     37 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-17: Particular requirements for
930                                routers and trimmers




                                               Pagina 134 din 346
      EN 60745-2-19:2009/A1:2010   Hand-held motor-operated electric tools -        NCT    5 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-19: Particular requirements for
931                                jointers
      EN 60745-2-21:2009/A1:2010   Hand-held motor-operated electric tools -        TR     5 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-21: Particular requirements for
932                                drain cleaners
      EN 60745-2-22:2011           Hand-held motor-operated electric tools -        TR    34 255 2006/42/EC   MMFPS
                                   Safety -- Part 2-22: Particular requirements for
933                                cut-off machines
      EN 61029-2-11:2009           Safety of transportable motor-operated           NCT   43 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-11: Particular
                                   requirements for combined mitre and bench
934                                saws
      EN 61029-1:2009              Safety of transportable motor-operated           NCT   87 255 2006/42/EC   MMFPS
                                   electric tools -- Part 1: General requirements
935
      EN 61029-1:2009/A11:2010     Safety of transportable motor-operated           NCT    3 255 2006/42/EC   MMFPS
                                   electric tools -- Part 1: General requirements
936
      EN 61029-2-3:2011            Safety of transportable motor-operated           TR    36 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-3: Particular
                                   requirements for planers and thicknessers
937
      EN 61029-2-4:2011            Safety of transportable motor-operated           TR    51 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-4: Particular
938                                requirements for bench grinders
      EN 61029-2-6:2010            Safety of transportable motor-operated           NCT   15 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-6: Particular
                                   requirements for diamond drills with water
939                                supply
      EN 61029-2-10:2010           Safety of transportable motor-operated           NCT   23 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-10: Particular
940                                requirements for cutting-off grinders
      EN 61029-2-12:2011           Safety of transportable motor-operated           TR    15 255 2006/42/EC   MMFPS
                                   electric tools -- Part 2-12: Particular
941                                requirements for threading machines
      EN 352-8:2008                Hearing protectors - Safety requirements and NCT       13 274 89/686/EEC   MMFPS
                                   testing - Part 8: Entertainment audio ear-muffs
942
      EN ISO 3741:2010             Acoustics - Determination of sound power         NCT   65 274 2006/42/EC   MMFPS
                                   levels and sound energy levels of noise
                                   sources using sound pressure - Precision
                                   methods for reverberation test rooms (ISO
943                                3741:2010)
      EN ISO 3743-1:2010           Acoustics - Determination of sound power      NCT      40 274 2006/42/EC   MMFPS
                                   levels and sound energy levels of noise
                                   sources using sound pressure - Engineering
                                   methods for small movable sources in
                                   reverberant fields - Part 1: Comparison
                                   method for a hard-walled test room (ISO 3743-
944                                1:2010)
      EN ISO 3744:2010             Acoustics - Determination of sound power         NCT   81 274 2006/42/EC   MMFPS
                                   levels and sound energy levels of noise
                                   sources using sound pressure - Engineering
                                   methods for an essentially free field over a
                                   reflecting plane (ISO 3744:2010)
945
      EN ISO 3746:2010             Acoustics - Determination of sound power         NCT   52 274 2006/42/EC   MMFPS
                                   levels and sound energy levels of noise
                                   sources using sound pressure - Survey
                                   method using an enveloping measurement
                                   surface over a reflecting plane (ISO
946                                3746:2010)
      EN ISO 3747:2010             Acoustics - Determination of sound power         NCT   47 274 2006/42/EC   MMFPS
                                   levels and sound energy levels of noise
                                   sources using sound pressure -
                                   Engineering/survey methods for use in situ in
                                   a reverberant environment (ISO 3747:2010)
947




                                               Pagina 135 din 346
      EN ISO 4869-3:2007    Acoustics - Hearing protectors - Part 3:           NCT   13 274 89/686/EEC   MMFPS
                            Measurement of insertion loss of ear-muff
                            type protectors using an acoustic test fixture
948                         (ISO 4869-3:2007)
      EN ISO 11201:2010     Acoustics - Noise emitted by machinery and         NCT   39 274 2006/42/EC   MMFPS
                            equipment - Determination of emission sound
                            pressure levels at a work station and at other
                            specified positions in an essentially free field
                            over a reflecting plane with negligible
                            environmental corrections (ISO 11201:2010)


949
      EN ISO 11202:2010     Acoustics - Noise emitted by machinery and         NCT   45 274 2006/42/EC   MMFPS
                            equipment - Determination of emission sound
                            pressure levels at a work station and at other
                            specified positions applying approximate
                            environmental corrections (ISO 11202:2010)


950
      EN ISO 11204:2010     Acoustics - Noise emitted by machinery and         NCT   41 274 2006/42/EC   MMFPS
                            equipment - Determination of emission sound
                            pressure levels at a work station and at other
                            specified positions applying accurate
                            environmental corrections (ISO 11204:2010)


951
      EN ISO 13753:2008     Mechanical vibration and shock - Hand-arm          NCT   16 274 2006/42/EC   MMFPS
                            vibration - Method for measuring the vibration
                            transmissibility of resilient materials when
                            loaded by the hand-arm system (ISO
952                         13753:1998)
      EN ISO 20643:2008     Mechanical vibration - Hand-held and hand-         NCT   20 274 2006/42/EC   MMFPS
                            guided machinery - Principles for evaluation
                            of vibration emission (ISO 20643:2005)
953
      EN ISO 28927-2:2009   Hand-held portable power tools - Test          NCT       44 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 2: Wrenches, nutrunners and
954                         screwdrivers (ISO 28927-2:2009)
      EN ISO 28927-3:2009   Hand-held portable power tools - Test          NCT       27 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 3: Polishers and rotary, orbital and
                            random orbital sanders (ISO 28927-3:2009)
955
      EN ISO 28927-5:2009   Hand-held portable power tools - Test          NCT       25 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 5: Drills and impact drills (ISO 28927-
956                         5:2009)
      EN ISO 28927-6:2009   Hand-held portable power tools - Test          NCT       21 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 6: Rammers (ISO 28927-6:2009)
957
      EN ISO 28927-7:2009   Hand-held portable power tools - Test          NCT       22 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 7: Nibblers and shears (ISO 28927-
958                         7:2009)
      EN ISO 28927-8:2009   Hand-held portable power tools - Test          NCT       29 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 8: Saws, polishing and filing machines
                            with reciprocating action and saws with
                            oscillating or rotating action (ISO 28927-
959                         8:2009)
      EN ISO 28927-9:2009   Hand-held portable power tools - Test          NCT       22 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 9: Scaling hammers and needle scalers
960                         (ISO 28927-9:2009)
      EN ISO 28927-4:2010   Hand-held portable power tools - Test          NCT       27 274 2006/42/EC   MMFPS
                            methods for evaluation of vibration emission -
                            Part 4: Straight grinders (ISO 28927-4:2010)
961




                                        Pagina 136 din 346
      EN ISO 28927-10:2011           Hand-held portable power tools - Test          TR     32 274 2006/42/EC   MMFPS
                                     methods for evaluation of vibration emission -
                                     Part 10: Percussive drills, hammers and
                                     breakers (ISO 28927-10:2011)
962
      EN ISO 28927-11:2011           Hand-held portable power tools - Test          NCT    21 274 2006/42/EC   MMFPS
                                     methods for evaluation of vibration emission -
                                     Part 11: Stone hammers (ISO 28927-11:2011)
963
      EN 12978:2003+A1:2009          Industrial, commercial and garage doors and     NCT   31 318 2006/42/EC   MMFPS
                                     gates - Safety devices for power operated
                                     doors and gates - Requirements and test
964                                  methods
      EN 1710:2005+A1:2008/AC:2010   Equipment and components intended for use       TR     2 358 2006/42/EC   MMFPS
                                     in potentially explosive atmospheres in
965                                  underground mines
      EN 13463-1:2009                Non-electrical equipment for use in potentially NCT   73 358 94/9/EC      MMFPS
                                     explosive atmospheres - Part 1: Basic method
966                                  and requirements
      EN 14034-1:2004+A1:2011        Determination of explosion characteristics of   TR    27 358 94/9/EC      MMFPS
                                     dust clouds - Part 1: Determination of the
                                     maximum explosion pressure pmax of dust
967                                  clouds
      EN 14034-2:2006+A1:2011        Determination of explosion characteristics of   TR    29 358 94/9/EC      MMFPS
                                     dust clouds - Part 2: Determination of the
                                     maximum rate of explosion pressure rise
                                     (dp/dt)max of dust clouds
968
      EN 14034-3:2006+A1:2011        Determination of explosion characteristics of   TR    27 358 94/9/EC      MMFPS
                                     dust clouds - Part 3: Determination of the
                                     lower explosion limit LEL of dust clouds
969
      EN 14034-4:2004+A1:2011        Determination of explosion characteristics of   TR    30 358 94/9/EC      MMFPS
                                     dust clouds - Part 4: Determination of the
                                     limiting oxygen concentration LOC of dust
970                                  clouds
971 EN 15089:2009                    Explosion isolation systems                     NCT   38 358 94/9/EC      MMFPS
    EN 15794:2009                    Determination of explosion points of            NCT   19 358 94/9/EC      MMFPS
972                                  flammable liquids
    EN 15947-1:2010                  Pyrotechnic articles - Fireworks, Categories 1, NCT   14 358 2007/23/EC   MMFPS
                                     2, and 3 - Part 1: Terminology
973
      EN 15947-2:2010                Pyrotechnic articles - Fireworks, Categories 1, NCT   13 358 2007/23/EC   MMFPS
                                     2, and 3 - Part 2: Categories and types of
974                                  firework
      EN 15947-3:2010                Pyrotechnic articles - Fireworks, Categories 1, NCT   22 358 2007/23/EC   MMFPS
                                     2, and 3 - Part 3: Minimum labelling
975                                  requirements
      EN 15947-4:2010                Pyrotechnic articles - Fireworks, Categories 1, NCT   39 358 2007/23/EC   MMFPS
                                     2 and 3 - Part 4: Test methods
976
      EN 15947-5:2010                Pyrotechnic articles - Fireworks, Categories 1, NCT   28 358 2007/23/EC   MMFPS
                                     2, and 3 - Part 5: Requirements for
                                     construction and performance
977
      EN ISO 16852:2010              Flame arresters - Performance requirements,     NCT   56 358 94/9/EC      MMFPS
                                     test methods and limits for use (ISO
                                     16852:2008, including Cor 1:2008 and Cor
978                                  2:2009)
      EN 1501-3:2008                 Refuse collection vehicles and their            NCT   63 360 2006/42/EC   MMFPS
                                     associated lifting devices - General
                                     requirements and safety requirements - Part
                                     3: Front loaded refuse collection vehicles
979
      EN 1501-4:2007                 Refuse collection vehicles and their            NCT   20 360 2006/42/EC   MMFPS
                                     associated lifting devices - General
                                     requirements and safety requirements - Part
                                     4: Noise test code for refuse collection
980                                  vehicles




                                                 Pagina 137 din 346
      EN 45502-2-1:2003           Active implantable medical devices -- Part 2-   FCT    95   22 90/385/EEC   MS
                                  1: Particular requirements for active
                                  implantable medical devices intended to treat
                                  bradyarrhythmia (cardiac pacemakers)
981
      EN 45502-2-2:2008           Active implantable medical devices -- Part 2-   NCT   105   22 90/385/EEC   MS
                                  2: Particular requirements for active
                                  implantable medical devices intended to treat
                                  tachyarrhythmia (includes implantable
982                               defibrillators)
      EN 45502-2-3:2010           Active implantable medical devices -- Part 2-   NCT    45   22 90/385/EEC   MS
                                  3: Particular requirements for cochlear and
                                  auditory brainstem implant systems
983
      EN 60522:1999               Determination of the permanent filtration of X- FCT    12   22 93/42/EEC    MS
984                               ray tube assemblies
      EN 60580:2000               Medical electrical equipment - Dose area        FCT    36   22 93/42/EEC    MS
985                               product meters
      EN 60601-2-33:2010          Medical electrical equipment -- Part 2-33:      TR    115   22 93/42/EEC    MS
                                  Particular requirements for the basic safety
                                  and essential performance of magnetic
                                  resonance equipment for medical diagnosis
986
      EN 60601-1-10:2008          Medical electrical equipment -- Part 1-10:      NCT    45   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral Standard:
                                  Requirements for the development of
                                  physiologic closed-loop controllers
987
      EN 60601-1-11:2010          Medical electrical equipment -- Part 1-11:      NCT    64   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral standard:
                                  Requirements for medical electrical
                                  equipment and medical electrical systems
                                  used in the home healthcare environment
988
      EN 60601-1-2:2007           Medical electrical equipment -- Part 1-2:       NCT   129   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral standard:
                                  Electromagnetic compatibility - Requirements
989                               and tests
      EN 60601-1-3:2008           Medical electrical equipment -- Part 1-3:       NCT    55   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral Standard:
                                  Radiation protection in diagnostic X-ray
990                               equipment
      EN 60601-1-6:2010           Medical electrical equipment -- Part 1-6:       NCT    30   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral standard:
991                               Usability
      EN 60601-1-8:2007           Medical electrical equipment -- Part 1-8:     NCT      84   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral Standard:
                                  General requirements, tests and guidance for
                                  alarm systems in medical electrical equipment
                                  and medical electrical systems
992
      EN 60601-1-9:2008           Medical electrical equipment -- Part 1-9:       NCT    35   22 93/42/EEC    MS
                                  General requirements for basic safety and
                                  essential performance - Collateral Standard:
                                  Requirements for environmentally conscious
993                               design
      EN 60601-2-1:1998           Medical electrical equipment -- Part 2-1:      FCT     67   22 93/42/EEC    MS
                                  Particular requirements for the safety of
                                  electron accelerators in the range of 1 MeV to
994                               50 MeV
      EN 60601-2-1:1998/A1:2002   Medical electrical equipment -- Part 2-1:      FCT      6   22 93/42/EEC    MS
                                  Particular requirements for the safety of
                                  electron accelerators in the range of 1 MeV to
995                               50 MeV




                                              Pagina 138 din 346
       EN 60601-2-2:2009            Medical electrical equipment -- Part 2-2:        NCT   86   22 93/42/EEC   MS
                                    Particular requirements for the basic safety
                                    and essential performance of high frequency
                                    surgical equipment and high frequency
 996                                surgical accessories
       EN 60601-2-3:1993            Medical electrical equipment -- Part 2:          FCT   23   22 93/42/EEC   MS
                                    Particular requirements for the safety of short-
 997                                wave therapy equipment
       EN 60601-2-3:1993/A1:1998    Medical electrical equipment -- Part 2:          FCT    9   22 93/42/EEC   MS
                                    Particular requirements for the safety of short-
 998                                wave therapy equipment
       EN 60601-2-4:2003            Medical electrical equipment -- Part 2-4:        FCT   59   22 93/42/EEC   MS
                                    Particular requirements for the safety of
 999                                cardiac defibrillators
       EN 60601-2-5:2000            Medical electrical equipment -- Part 2-5:        FCT   24   22 93/42/EEC   MS
                                    Particular requirements for the safety of
1000                                ultrasonic physiotherapy equipment
       EN 60601-2-8:1997            Medical electrical equipment -- Part 2:          FCT   38   22 93/42/EEC   MS
                                    Particular requirements for the safety of
                                    therapeutic X-ray equipment operating in the
1001                                range 10 kV to 1 MV
       EN 60601-2-8:1997/A1:1997    Medical electrical equipment -- Part 2:          FCT   26   22 93/42/EEC   MS
                                    Particular requirements for the safety of
                                    therapeutic X-ray equipment operating in the
1002                                range 10 kV to 1 MV
       EN 60601-2-10:2000           Medical electrical equipment -- Part 2-10:      FCT    20   22 93/42/EEC   MS
                                    Particular requirements for the safety of nerve
1003                                and muscle stimulators
       EN 60601-2-10:2000/A1:2001   Medical electrical equipment -- Part 2-10:      FCT     7   22 93/42/EEC   MS
                                    Particular requirements for the safety of nerve
1004                                and muscle stimulators
       EN 60601-2-11:1997           Medical electrical equipment -- Part 2-11:       FCT   51   22 93/42/EEC   MS
                                    Particular requirements for the safety of
1005                                gamma beam therapy equipment
       EN 60601-2-11:1997/A1:2004   Medical electrical equipment -- Part 2-11:       NCT    7   22 93/42/EEC   MS
                                    Particular requirements for the safety of
1006                                gamma beam therapy equipment
       EN 60601-2-12:2006           Medical electrical equipment -- Part 2-12:       NCT   50   22 93/42/EEC   MS
                                    Particular requirements for the safety of lung
1007                                ventilators - Critical care ventilators
       EN 60601-2-13:2006           Medical electrical equipment -- Part 2-13:   NCT       49   22 93/42/EEC   MS
                                    Particular requirements for the safety and
                                    essential performance of anaesthetic systems
1008
       EN 60601-2-13:2006/A1:2007   Medical electrical equipment -- Part 2-13:   NCT        5   22 93/42/EEC   MS
                                    Particular requirements for the safety and
                                    essential performance of anaesthetic systems
1009
       EN 60601-2-17:2004           Medical electrical equipment -- Part 2-17:       FCT   38   22 93/42/EEC   MS
                                    Particular requirements for the safety of
                                    automatically-controlled brachytherapy
1010                                afterloading equipment
       EN 60601-2-18:1996           Medical electrical equipment -- Part 2:          FCT   30   22 93/42/EEC   MS
                                    Particular requirements for the safety of
1011                                endoscopic equipment
       EN 60601-2-18:1996/A1:2000   Medical electrical equipment -- Part 2:          FCT   13   22 93/42/EEC   MS
                                    Particular requirements for the safety of
1012                                endoscopic equipment
       EN 60601-2-19:2009           Medical electrical equipment -- Part 2-19:     NCT     43   22 93/42/EEC   MS
                                    Particular requirements for the basic safety
                                    and essential performance of infant incubators
1013
       EN 60601-2-20:2009           Medical electrical equipment -- Part 2-20:       NCT   47   22 93/42/EEC   MS
                                    Particular requirements for the basic safety
                                    and essential performance of infant transport
1014                                incubators
       EN 60601-2-21:2009           Medical electrical equipment -- Part 2-21:       NCT   41   22 93/42/EEC   MS
                                    Particular requirements for the basic safety
                                    and essential performance of infant radiant
1015                                warmers




                                                Pagina 139 din 346
       EN 60601-2-23:2000   Medical electrical equipment -- Part 2-23:     FCT   39   22 93/42/EEC   MS
                            Particular requirements for the safety,
                            including essential performance, of
                            transcutaneous partial pressure monitoring
1016                        equipment
       EN 60601-2-24:1998   Medical electrical equipment -- Part 2-24:     FCT   68   22 93/42/EEC   MS
                            Particular requirements for the safety of
1017                        infusion pumps and controllers
       EN 60601-2-27:2006   Medical electrical equipment -- Part 2-27:     NCT   73   22 93/42/EEC   MS
                            Particular requirements for the safety,
                            including essential performance, of
                            electrocardiographic monitoring equipment
1018
       EN 60601-2-28:2010   Medical electrical equipment -- Part 2-28:     NCT   23   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of X-ray tube
1019                        assemblies for medical diagnosis
       EN 60601-2-29:2008   Medical electrical equipment -- Part 2-29:     NCT   30   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of radiotherapy
1020                        simulators
       EN 60601-2-31:2008   Medical electrical equipment -- Part 2-31:    NCT    41   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of external cardiac
                            pacemakers with internal power source
1021
       EN 60601-2-34:2000   Medical electrical equipment -- Part 2-34:     FCT   61   22 93/42/EEC   MS
                            Particular requirements for the safety,
                            including essential performance, of invasive
                            blood pressure monitoring equipment
1022
       EN 60601-2-36:1997   Medical electrical equipment -- Part 2:        FCT   22   22 93/42/EEC   MS
                            Particular requirements for the safety of
                            equipment for extracorporeally induced
1023                        lithotripsy
       EN 60601-2-37:2008   Medical electrical equipment -- Part 2-37:     NCT   46   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of ultrasonic
                            medical diagnostic and monitoring equipment
1024
       EN 60601-2-39:2008   Medical electrical equipment -- Part 2-39:     NCT   22   22 93/42/EEC   MS
                            Particular requirements for basic safety and
                            essential performance of peritoneal dialysis
1025                        equipment
       EN 60601-2-40:1998   Medical electrical equipment -- Part 2-40:     FCT   22   22 93/42/EEC   MS
                            Particular requirements for the safety of
                            electromyographs and evoked response
1026                        equipment
       EN 60601-2-41:2009   Medical electrical equipment -- Part 2-41:     NCT   44   22 93/42/EEC   MS
                            Particular requirements for basic safety and
                            essential performance of surgical luminaires
1027                        and luminaires for diagnosis
       EN 60601-2-43:2010   Medical electrical equipment -- Part 2-43:     NCT   58   22 93/42/EEC   MS
                            Particular requirements for basic safety and
                            essential performance of X-ray equipment for
1028                        interventional procedures
       EN 60601-2-44:2009   Medical electrical equipment -- Part 2-44:   NCT     50   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of X-ray equipment
1029                        for computed tomography
       EN 60601-2-45:2011   Medical electrical equipment -- Part 2-45:     TR    57   22 93/42/EEC   MS
                            Particular requirements for the basic safety
                            and essential performance of mammographic
                            X-ray equipment and mammographic
1030                        stereotactic devices
       EN 60601-2-47:2001   Medical electrical equipment -- Part 2-47:     FCT   47   22 93/42/EEC   MS
                            Particular requirements for the safety,
                            including essential performance, of
1031                        ambulatory electrocardiographic systems
       EN 60601-2-49:2001   Medical electrical equipment -- Part 2-49:     FCT   48   22 93/42/EEC   MS
                            Particular requirements for the safety of
1032                        multifunction patient monitoring equipment



                                        Pagina 140 din 346
       EN 60601-2-50:2009      Medical electrical equipment -- Part 2-50:      NCT    35   22 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of infant
1033                           phototherapy equipment
       EN 60601-2-51:2003      Medical electrical equipment -- Part 2-51:      FCT    86   22 93/42/EEC   MS
                               Particular requirements for safety, including
                               essential performance, of recording and
                               analysing single channel and multichannel
1034                           electrocardiographs
       EN 60601-2-52:2010      Medical electrical equipment -- Part 2-52:      NCT    88   22 93/42/EEC   MS
                               Particular requirements for basic safety and
                               essential performance of medical beds
1035
       EN 60627:2001           Diagnostic X-ray imaging equipment -            FCT    31   22 93/42/EEC   MS
                               Characteristics of general purpose and
1036                           mammographic anti-scatter grids
       EN 61217:1996           Radiotherapy equipment - Coordinates,           FCT    71   22 93/42/EEC   MS
1037                           movements and scales
       EN 61217:1996/A1:2001   Radiotherapy equipment - Coordinates,           FCT     9   22 93/42/EEC   MS
1038                           movements and scales
       EN 61217:1996/A2:2008   Radiotherapy equipment - Coordinates,           NCT     8   22 93/42/EEC   MS
1039                           movements and scales
       EN 61676:2002/A1:2009   Medical electrical equipment - Dosimetric       NCT     6   22 93/42/EEC   MS
                               instruments used for non-invasive
                               measurement of X-ray tube voltage in
1040                           diagnostic radiology
       EN 62083:2009           Medical electrical equipment - Requirements     NCT    35   22 93/42/EEC   MS
                               for the safety of radiotherapy treatment
1041                           planning systems
       EN 62220-1-2:2007       Medical electrical equipment - Characteristics NCT     34   22 93/42/EEC   MS
                               of digital X-ray imaging devices -- Part 1-2:
                               Determination of the detective quantum
                               efficiency - Detectors used in mammography
1042
       EN 62220-1-3:2008       Medical electrical equipment - Characteristics NCT     39   22 93/42/EEC   MS
                               of digital X-ray imaging devices -- Part 1-3:
                               Determination of the detective quantum
                               efficiency - Detectors used in dynamic imaging
1043
       EN 62304:2006           Medical device software - Software life-cycle NCT      81   22 93/42/EEC   MS
1044                           processes
       EN 62366:2008           Medical devices - Application of usability    NCT     109   22 93/42/EEC   MS
1045                           engineering to medical devices
       EN 80601-2-30:2010      Medical electrical equipment -- Part 2-30:    NCT      60   22 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of automated non-
                               invasive sphygmomanometers
1046
       EN 80601-2-35:2009      Medical electrical equipment -- Part 2-35:      NCT    74   22 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of heating devices
                               using blankets, pads and mattresses and
                               intended for heating in medical use
1047
       EN 80601-2-58:2009      Medical electrical equipment -- Part 2-58:    NCT      32   22 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of lens removal
                               devices and vitrectomy devices for ophthalmic
1048                           surgery
       EN 80601-2-59:2009      Medical electrical equipment -- Part 2-59:      NCT    40   22 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of screening
                               thermographs for human febrile temperature
1049                           screening
       EN 60601-2-57:2011      Medical electrical equipment -- Part 2-57:    TR       40   38 93/42/EEC   MS
                               Particular requirements for the basic safety
                               and essential performance of non-laser light
                               source equipment intended for therapeutic,
                               diagnostic, monitoring and cosmetic/aesthetic
1050                           use




                                           Pagina 141 din 346
       EN 14931:2006                 Pressure vessels for human occupancy          NCT      39 152 93/42/EEC   MS
                                     (PVHO) - Multi-place pressure chamber
                                     systems for hyperbaric therapy - Performance,
                                     safety requirements and testing
1051
       EN ISO 11810-1:2009           Lasers and laser-related equipment - Test        NCT   15 230 93/42/EEC   MS
                                     method and classification for the laser
                                     resistance of surgical drapes and/or patient
                                     protective covers - Part 1: Primary ignition
                                     and penetration (ISO 11810-1:2005)
1052
       EN ISO 11810-2:2009           Lasers and laser-related equipment - Test        NCT   15 230 93/42/EEC   MS
                                     method and classification for the laser-
                                     resistance of surgical drapes and/or patient-
                                     protective covers - Part 2: Secondary ignition
1053                                 (ISO 11810-2:2007)
       EN ISO 11979-8:2009           Ophthalmic implants - Intraocular lenses -       NCT    8 230 93/42/EEC   MS
                                     Part 8: Fundamental requirements (ISO
1054                                 11979-8:2006)
       EN ISO 11979-8:2009/A1:2011   Ophthalmic implants - Intraocular lenses -       TR     5 230 93/42/EEC   MS
                                     Part 8: Fundamental requirements -
                                     Amendment 1 (ISO 11979-8:2006/Amd
1055                                 1:2011)
       EN ISO 11990-2:2010           Lasers and laser-related equipment -             NCT   14 230 93/42/EEC   MS
                                     Determination of laser resistance of tracheal
                                     tubes - Part 2: Tracheal tube cuffs (ISO
1056                                 11990-2:2010)
       EN ISO 12870:2009             Ophthalmic optics - Spectacle frames -           NCT   30 230 93/42/EEC   MS
                                     Requirements and test methods (ISO
1057                                 12870:2004)
       EN ISO 14534:2011             Ophthalmic optics - Contact lenses and           TR    13 230 93/42/EEC   MS
                                     contact lens care products - Fundamental
                                     requirements (ISO 14534:2011)
1058
       EN ISO 14889:2009             Ophthalmic optics - Spectacle lenses -           NCT   12 230 93/42/EEC   MS
                                     Fundamental requirements for uncut finished
1059                                 lenses (ISO 14889:2003)
       EN ISO 15004-1:2009           Ophthalmic instruments - Fundamental             NCT   13 230 93/42/EEC   MS
                                     requirements and test methods - Part 1:
                                     General requirements applicable to all
                                     ophthalmic instruments (ISO 15004-1:2006)
1060
       EN ISO 15798:2010             Ophthalmic implants - Ophthalmic              NCT      21 230 93/42/EEC   MS
1061                                 viscosurgical devices (ISO 15798:2010)
       EN ISO 21987:2009             Ophthalmic optics - Mounted spectacle lenses NCT       21 230 93/42/EEC   MS
1062                                 (ISO 21987:2009)
       EN 13624:2003                 Chemical disinfectants and antiseptics -      FCT      39 298 93/42/EEC   MS
                                     Quantitative suspension test for the
                                     evaluation of fungicidal activity of chemical
                                     disinfectants for instruments used in the
                                     medical area - Test method and requirements
1063                                 (phase 2, step 1)
       EN 13727:2003                 Chemical disinfectants and antiseptics -        FCT    36 298 93/42/EEC   MS
                                     Quantitative suspension test for the
                                     evaluation of bactericidal activity of chemical
                                     disinfectants for instruments used in the
                                     medical area - Test method and requirements
1064                                 (phase 2, step 1)
       EN 14563:2008                 Chemical disinfectants and antiseptics -        NCT    36 298 93/42/EEC   MS
                                     Quantitative carrier test for the evaluation of
                                     mycobactericidal or tuberculocidal activity of
                                     chemical disinfectants used for instruments in
                                     the medical area - Test method and
                                     requirements (phase 2, step 2)
1065
       EN 455-2:2009+A1:2011         Medical gloves for single use - Part 2:          TR    11 377 93/42/EEC   MS
                                     Requirements and testing for physical
1066                                 properties
       EN 455-3:2006                 Medical gloves for single use - Part 3:          NCT   36 377 93/42/EEC   MS
                                     Requirements and testing for biological
1067                                 evaluation




                                                 Pagina 142 din 346
       EN 455-4:2009            Medical gloves for single use - Part 4:           NCT   19 377 93/42/EEC   MS
                                Requirements and testing for shelf life
1068                            determination
       EN 556-1:2001            Sterilization of medical devices -          FCT          8 377 93/42/EEC   MS
                                Requirements for medical devices to be
                                designated "STERILE" - Part 1: Requirements
                                for terminally sterilized medical devices
1069
       EN 794-3:1998+A2:2009    Lung ventilators - Part 3: Particular             NCT   46 377 93/42/EEC   MS
                                requirements for emergency and transport
1070                            ventilators
       EN 1041:2008             Information supplied by the manufacturer of       NCT   25 377 93/42/EEC   MS
1071                            medical devices
       EN 1060-1:1995+A2:2009   Non-invasive sphygmomanometers - Part 1:          NCT   12 377 93/42/EEC   MS
1072                            General requirements
       EN 1060-2:1995+A1:2009   Non-invasive sphygmomanometers - Part 2:          NCT   22 377 93/42/EEC   MS
                                Supplementary requirements for mechanical
1073                            sphygmomanometers
       EN 1060-3:1997+A2:2009   Non-invasive sphygmomanometers - Part 3:          NCT   25 377 93/42/EEC   MS
                                Supplementary requirements for electro-
                                mechanical blood pressure measuring
1074                            systems
       EN 1060-4:2004           Non-invasive sphygmomanometers - Part 4:          FCT   32 377 93/42/EEC   MS
                                Test procedures to determine the overall
                                system accuracy of automated non-invasive
1075                            sphygmomanometers
       EN ISO 1135-4:2010       Transfusion equipment for medical use - Part      NCT   19 377 93/42/EEC   MS
                                4: Transfusion sets for single use (ISO 1135-
1076                            4:2010)
       EN 1282-2:2005+A1:2009   Tracheostomy tubes - Part 2: Paediatric tubes NCT       19 377 93/42/EEC   MS
1077                            (ISO 5366-3:2001, modified)
       EN 1422:1997+A1:2009     Sterilizers for medical purposes - Ethylene   NCT       56 377 93/42/EEC   MS
                                oxide sterilizers - Requirements and test
1078                            methods
1079 EN 1782:1998+A1:2009       Tracheal tubes and connectors                     NCT   27 377 93/42/EEC   MS
     EN 1820:2005+A1:2009       Anaesthetic reservoir bags (ISO 5362:2000,        NCT   20 377 93/42/EEC   MS
1080                            modified)
     EN 1865-1:2010             Patient handling equipment used in road           NCT   32 377 93/42/EEC   MS
                                ambulances - Part 1: General stretcher
1081                            systems and patient handling equipment
       EN 1865-2:2010           Patient handling equipment used in road       NCT       11 377 93/42/EEC   MS
                                ambulances - Part 2: Power assisted stretcher
1082
       EN ISO 3826-2:2008       Plastics collapsible containers for human         NCT   14 377 93/42/EEC   MS
                                blood and blood components - Part 2:
                                Graphical symbols for use on labels and
1083                            instruction leaflets (ISO 3826-2:2008)
       EN ISO 3826-3:2007       Plastics collapsible containers for human         NCT   14 377 93/42/EEC   MS
                                blood and blood components - Part 3: Blood
                                bag systems with integrated features (ISO
1084                            3826-3:2006)
       EN ISO 4074:2002         Natural latex rubber condoms - Requirements FCT         49 377 93/42/EEC   MS
                                and test methods (ISO 4074:2002)
1085
       EN ISO 4135:2001         Anaesthetic and respiratory equipment -     FCT         66 377 93/42/EEC   MS
1086                            Vocabulary (ISO 4135:2001)
       EN ISO 5356-2:2007       Anaesthetic and respiratory equipment -     NCT          6 377 93/42/EEC   MS
                                Conical connectors - Part 2: Screw-threaded
                                weight-bearing connectors (ISO 5356-2:2006)
1087
       EN ISO 5359:2008         Low-pressure hose assemblies for use with         NCT   33 377 93/42/EEC   MS
1088                            medical gases (ISO 5359:2008)
       EN ISO 5360:2009         Anaesthetic vaporizers - Agent-specific filling   NCT   26 377 93/42/EEC   MS
1089                            systems (ISO 5360:2006)
       EN ISO 5366-1:2009       Anaesthetic and respiratory equipment -           NCT   19 377 93/42/EEC   MS
                                Tracheostomy tubes - Part 1: Tubes and
                                connectors for use in adults (ISO 5366-
1090                            1:2000)
       EN ISO 5840:2009         Cardiovascular implants - Cardiac valve           NCT   89 377 93/42/EEC   MS
1091                            prostheses (ISO 5840:2005)




                                            Pagina 143 din 346
       EN ISO 7197:2009             Neurosurgical implants - Sterile, single-use      NCT    12 377 93/42/EEC   MS
                                    hydrocephalus shunts and components (ISO
                                    7197:2006, including Cor 1:2007)
1092
       EN ISO 7376:2009             Anaesthetic and respiratory equipment -           NCT    32 377 93/42/EEC   MS
                                    Laryngoscopes for tracheal intubation (ISO
1093                                7376:2009)
       EN ISO 7396-1:2007           Medical gas pipeline systems - Part 1:            NCT   145 377 93/42/EEC   MS
                                    Pipeline systems for compressed medical
1094                                gases and vacuum (ISO 7396-1:2007)
       EN ISO 7396-1:2007/A1:2010   Medical gas pipeline systems - Part 1:            NCT     5 377 93/42/EEC   MS
                                    Pipeline systems for compressed medical
                                    gases and vacuum - Amendment 1:
                                    Requirements for terminal units for vacuum
                                    fitted on medical supply units with operator-
                                    adjustable portions and connected to the
                                    pipeline through flexible hoses (ISO 7396-
                                    1:2007/Amd 1:2010)
1095
       EN ISO 7396-1:2007/A2:2010   Medical gas pipeline systems - Part 1:    NCT             6 377 93/42/EEC   MS
                                    Pipeline systems for compressed medical
                                    gases and vacuum - Amendment 2 (ISO 7396-
1096                                1:2007/Amd 2:2010)
       EN ISO 7396-2:2007           Medical gas pipeline systems - Part 2:      NCT          49 377 93/42/EEC   MS
                                    Anaesthetic gas scavenging disposal systems
1097                                (ISO 7396-2:2007)
       EN ISO 7439:2011             Copper-bearing contraceptive intrauterine         TR     14 377 93/42/EEC   MS
                                    devices - Requirements and tests (ISO
1098                                7439:2011)
       EN ISO 7886-3:2009           Sterile hypodermic syringes for single use -      NCT    18 377 93/42/EEC   MS
                                    Part 3: Auto-disable syringes for fixed-dose
                                    immunization (ISO 7886-3:2005)
1099
       EN ISO 7886-4:2009           Sterile hypodermic syringes for single use -      NCT    18 377 93/42/EEC   MS
                                    Part 4: Syringes with re-use prevention
1100                                feature (ISO 7886-4:2006)
       EN ISO 8185:2009             Respiratory tract humidifiers for medical use -   NCT    57 377 93/42/EEC   MS
                                    Particular requirements for respiratory
                                    humidification systems (ISO 8185:2007)
1101
       EN ISO 8536-4:2010           Infusion equipment for medical use - Part 4:      NCT    22 377 93/42/EEC   MS
                                    Infusion sets for single use, gravity feed (ISO
1102                                8536-4:2010)
       EN ISO 8835-2:2009           Inhalational anaesthesia systems - Part 2:        NCT    27 377 93/42/EEC   MS
                                    Anaesthetic breathing systems (ISO 8835-
1103                                2:2007)
       EN ISO 8835-3:2009           Inhalational anaesthesia systems - Part 3:        NCT    27 377 93/42/EEC   MS
                                    Transfer and receiving systems of active
                                    anaesthetic gas scavenging systems (ISO
1104                                8835-3:2007)
       EN ISO 8835-3:2009/A1:2010   Inhalational anaesthesia systems - Part 3:        NCT     6 377 93/42/EEC   MS
                                    Transfer and receiving systems of active
                                    anaesthetic gas scavenging systems (ISO
1105                                8835-3:2007/AMD 1:2010)
       EN ISO 8835-4:2009           Inhalational anaesthesia systems - Part 4:        NCT    27 377 93/42/EEC   MS
                                    Anaesthetic vapour delivery devices (ISO
1106                                8835-4:2004)
       EN ISO 8835-5:2009           Inhalational anaesthesia systems - Part 5:        NCT    26 377 93/42/EEC   MS
                                    Anaesthetic ventilators (ISO 8835-5:2004)
1107
       EN ISO 9170-1:2008           Terminal units for medical gas pipeline       NCT        25 377 93/42/EEC   MS
                                    systems - Part 1: Terminal units for use with
                                    compressed medical gases and vacuum (ISO
1108                                9170-1:2008)
       EN ISO 9170-2:2008           Terminal units for medical gas pipeline           NCT    27 377 93/42/EEC   MS
                                    systems - Part 2: Terminal units for
                                    anaesthetic gas scavenging systems (ISO
1109                                9170-2:2008)
       EN ISO 9360-1:2009           Anaesthetic and respiratory equipment - Heat      NCT    24 377 93/42/EEC   MS
                                    and moisture exchangers (HMEs) for
                                    humidifying respired gases in humans - Part
                                    1: HMEs for use with minimum tidal volumes
1110                                of 250 ml (ISO 9360-1:2000)



                                                Pagina 144 din 346
       EN ISO 9360-2:2009     Anaesthetic and respiratory equipment - Heat NCT        12 377 93/42/EEC   MS
                              and moisture exchangers (HMEs) for
                              humidifying respired gases in humans - Part
                              2: HMEs for use with tracheostomized
                              patients having minimum tidal volumes of 250
1111                          ml (ISO 9360-2:2001)
       EN ISO 10079-1:2009    Medical suction equipment - Part 1:              NCT    35 377 93/42/EEC   MS
                              Electrically powered suction equipment -
1112                          Safety requirements (ISO 10079-1:1999)
       EN ISO 10079-2:2009    Medical suction equipment - Part 2: Manually     NCT    17 377 93/42/EEC   MS
                              powered suction equipment (ISO 10079-
1113                          2:1999)
       EN ISO 10079-3:2009    Medical suction equipment - Part 3: Suction      NCT    26 377 93/42/EEC   MS
                              equipment powered from a vacuum or
                              pressure source (ISO 10079-3:1999)
1114
       EN ISO 10328:2006      Prosthetics - Structural testing of lower-limb   NCT   139 377 93/42/EEC   MS
                              prostheses - Requirements and test methods
1115                          (ISO 10328:2006)
       EN ISO 10524-1:2006    Pressure regulators for use with medical         NCT    32 377 93/42/EEC   MS
                              gases - Part 1: Pressure regulators and
                              pressure regulators with flow-metering
1116                          devices (ISO 10524-1:2006)
       EN ISO 10524-2:2006    Pressure regulators for use with medical         NCT    33 377 93/42/EEC   MS
                              gases - Part 2: Manifold and line pressure
1117                          regulators (ISO 10524-2:2005)
       EN ISO 10524-3:2006    Pressure regulators for use with medical       NCT      38 377 93/42/EEC   MS
                              gases - Part 3: Pressure regulators integrated
                              with cylinder valves (ISO 10524-3:2005)
1118
       EN ISO 10524-4:2008    Pressure regulators for use with medical         NCT    34 377 93/42/EEC   MS
                              gases - Part 4: Low-pressure regulators (ISO
1119                          10524-4:2008)
       EN ISO 10535:2006      Hoists for the transfer of disabled persons -    NCT    52 377 93/42/EEC   MS
                              Requirements and test methods (ISO
1120                          10535:2006)
       EN ISO 10555-1:2009    Sterile, single-use intravascular catheters -    NCT    18 377 93/42/EEC   MS
                              Part 1: General requirements (ISO 10555-
                              1:1995, including Amd 1:1999 and Amd
1121                          2:2004)
       EN ISO 10651-2:2009    Lung ventilators for medical use - Particular    NCT    38 377 93/42/EEC   MS
                              requirements for basic safety and essential
                              performance - Part 2: Home care ventilators
                              for ventilator-dependent patients (ISO 10651-
1122                          2:2004)
       EN ISO 10651-4:2009    Lung ventilators - Part 4: Particular            NCT    27 377 93/42/EEC   MS
                              requirements for operator-powered
1123                          resuscitators (ISO 10651-4:2002)
       EN ISO 10651-6:2009    Lung ventilators for medical use - Particular    NCT    34 377 93/42/EEC   MS
                              requirements for basic safety and essential
                              performance - Part 6: Home-care ventilatory
                              support devices (ISO 10651-6:2004)
1124
       EN ISO 10993-1:2009    Biological evaluation of medical devices - Part NCT     26 377 93/42/EEC   MS
                              1: Evaluation and testing within a risk
                              management process (ISO 10993-1:2009)
1125
       EN ISO 10993-10:2010   Biological evaluation of medical devices - Part NCT     70 377 93/42/EEC   MS
                              10: Tests for irritation and skin sensitization
1126                          (ISO 10993-10:2010)
       EN ISO 10993-11:2009   Biological evaluation of medical devices - Part NCT     31 377 93/42/EEC   MS
                              11: Tests for systemic toxicity (ISO 10993-
1127                          11:2006)
       EN ISO 10993-13:2010   Biological evaluation of medical devices - Part NCT     19 377 93/42/EEC   MS
                              13: Identification and quantification of
                              degradation products from polymeric medical
1128                          devices (ISO 10993-13:2010)
       EN ISO 10993-14:2009   Biological evaluation of medical devices - Part NCT     16 377 93/42/EEC   MS
                              14: Identification and quantification of
                              degradation products from ceramics (ISO
1129                          10993-14:2001)




                                           Pagina 145 din 346
       EN ISO 10993-15:2009      Biological evaluation of medical devices - Part NCT       16 377 93/42/EEC   MS
                                 15: Identification and quantification of
                                 degradation products from metals and alloys
1130                             (ISO 10993-15:2000)
       EN ISO 10993-16:2010      Biological evaluation of medical devices - Part NCT       16 377 93/42/EEC   MS
                                 16: Toxicokinetic study design for degradation
                                 products and leachables (ISO 10993-16:2010)
1131
       EN ISO 10993-17:2009      Biological evaluation of medical devices - Part NCT       30 377 93/42/EEC   MS
                                 17: Establishment of allowable limits for
                                 leachable substances (ISO 10993-17:2002)
1132
       EN ISO 10993-18:2009      Biological evaluation of medical devices - Part NCT       22 377 93/42/EEC   MS
                                 18: Chemical characterization of materials
1133                             (ISO 10993-18:2005)
       EN ISO 10993-3:2009       Biological evaluation of medical devices - Part NCT       20 377 93/42/EEC   MS
                                 3: Tests for genotoxicity, carcinogenicity and
                                 reproductive toxicity (ISO 10993-3:2003)
1134
       EN ISO 10993-4:2009       Biological evaluation of medical devices - Part NCT       44 377 93/42/EEC   MS
                                 4: Selection of tests for interactions with blood
                                 (ISO 10993-4:2002, including Amd 1:2006)
1135
       EN ISO 10993-5:2009       Biological evaluation of medical devices - Part NCT       39 377 93/42/EEC   MS
                                 5: Tests for in vitro cytotoxicity (ISO 10993-
1136                             5:2009)
       EN ISO 10993-6:2009       Biological evaluation of medical devices - Part NCT       26 377 93/42/EEC   MS
                                 6: Tests for local effects after implantation
1137                             (ISO 10993-6:2007)
       EN ISO 10993-7:2008       Biological evaluation of medical devices - Part NCT       91 377 93/42/EEC   MS
                                 7: Ethylene oxide sterilization residuals (ISO
1138                             10993-7:2008)
       EN ISO 10993-9:2009       Biological evaluation of medical devices - Part NCT       14 377 93/42/EEC   MS
                                 9: Framework for identification and
                                 quantification of potential degradation
1139                             products (ISO 10993-9:2009)
       EN ISO 11135-1:2007       Sterilization of health care products - Ethylene NCT      44 377 93/42/EEC   MS
                                 oxide - Part 1: Requirements for development,
                                 validation and routine control of a sterilization
                                 process for medical devices (ISO 11135-
1140                             1:2007)
       EN ISO 11737-2:2009       Sterilization of medical devices -                  NCT   19 377 93/42/EEC   MS
                                 Microbiological methods - Part 2: Tests of
                                 sterility performed in the definition, validation
                                 and maintenance of a sterilization process
1141                             (ISO 11737-2:2009)
       EN 12006-2:1998+A1:2009   Non active surgical implants - Particular           NCT   13 377 93/42/EEC   MS
                                 requirements for cardiac and vascular
                                 implants - Part 2: Vascular prostheses
1142                             including cardiac valve conduits
       EN 12183:2009             Manual wheelchairs - Requirements and test          NCT   47 377 93/42/EEC   MS
1143                             methods
       EN 12184:2009             Electrically powered wheelchairs, scooters          NCT   59 377 93/42/EEC   MS
                                 and their chargers - Requirements and test
1144                             methods
       EN 12342:1998+A1:2009     Breathing tubes intended for use with        NCT          25 377 93/42/EEC   MS
1145                             anaesthetic apparatus and ventilators
       EN 12470-2:2000+A1:2009   Clinical thermometers - Part 2: Phase change NCT          17 377 93/42/EEC   MS
1146                             type (dot matrix) thermometers
       EN 12470-3:2000+A1:2009   Clinical thermometers - Part 3: Performance  NCT          20 377 93/42/EEC   MS
                                 of compact electrical thermometers (non-
                                 predictive and predictive) with maximum
1147                             device
       EN 12470-4:2000+A1:2009   Clinical thermometers - Part 4: Performance         NCT   19 377 93/42/EEC   MS
                                 of electrical thermometers for continuous
1148                             measurement
       EN 12470-5:2003           Clinical thermometers - Part 5: Performance         FCT   28 377 93/42/EEC   MS
                                 of infra-red ear thermometers (with maximum
1149                             device)
       EN ISO 13408-1:2011       Aseptic processing of health care products -        TR    51 377 93/42/EEC   MS
                                 Part 1: General requirements (ISO 13408-
1150                             1:2008)



                                              Pagina 146 din 346
       EN ISO 13408-2:2011         Aseptic processing of health care products -        TR    17 377 93/42/EEC   MS
                                   Part 2: Filtration (ISO 13408-2:2003)
1151
       EN ISO 13408-3:2011         Aseptic processing of health care products -        TR    17 377 93/42/EEC   MS
                                   Part 3: Lyophilization (ISO 13408-3:2006)
1152
       EN ISO 13408-4:2011         Aseptic processing of health care products -        TR    20 377 93/42/EEC   MS
                                   Part 4: Clean-in-place technologies (ISO
1153                               13408-4:2005)
       EN ISO 13408-5:2011         Aseptic processing of health care products -        TR    20 377 93/42/EEC   MS
                                   Part 5: Sterilization in place (ISO 13408-
1154                               5:2006)
       EN ISO 13408-6:2011         Aseptic processing of health care products -        TR    20 377 93/42/EEC   MS
                                   Part 6: Isolator systems (ISO 13408-6:2005)
1155
       EN ISO 13485:2003/AC:2009   Medical devices - Quality management                NCT    5 377 93/42/EEC   MS
                                   systems - Requirements for regulatory
1156                               purposes (ISO 13485:2003/Cor 1:2009)
       EN 13544-1:2007+A1:2009     Respiratory therapy equipment - Part 1:             NCT   43 377 93/42/EEC   MS
1157                               Nebulizing systems and their components
       EN 13544-2:2002+A1:2009     Respiratory therapy equipment - Part 2:             NCT   19 377 93/42/EEC   MS
1158                               Tubing and connectors
       EN 13544-3:2001+A1:2009     Respiratory therapy equipment - Part 3: Air         NCT   14 377 93/42/EEC   MS
1159                               entrainment devices
       EN 13612:2002/AC:2002       Performance evaluation of in vitro diagnostic       FCT    1 377 98/79/EC    MS
1160                               medical devices
       EN 13640:2002               Stability testing of in vitro diagnostic reagents   FCT   10 377 98/79/EC    MS
1161
       EN 13718-1:2008             Medical vehicles and their equipment - Air          NCT   19 377 93/42/EEC   MS
                                   ambulances - Part 1: Requirements for
                                   medical devices used in air ambulances
1162
       EN 13795:2011               Surgical drapes, gowns and clean air suits,         TR    22 377 93/42/EEC   MS
                                   used as medical devices for patients, clinical
                                   staff and equipment - General requirements
                                   for manufacturers, processors and products,
                                   test methods, performance requirements and
                                   performance levels
1163
       EN 13975:2003               Sampling procedures used for acceptance             FCT   12 377 98/79/EC    MS
                                   testing of in vitro diagnostic medical devices -
1164                               Statistical aspects
       EN 13976-2:2003/AC:2004     Rescue systems - Transportation of                  FCT    1 377 93/42/EEC   MS
1165                               incubators - Part 2: System requirements
       EN 13976-1:2011             Rescue systems - Transportation of                  TR    12 377 93/42/EEC   MS
1166                               incubators - Part 1: Interface conditions
       EN 13976-2:2011             Rescue systems - Transportation of                  TR    11 377 93/42/EEC   MS
1167                               incubators - Part 2: System requirements
       EN 14136:2004               Use of external quality assessment schemes          FCT   11 377 98/79/EC    MS
                                   in the assessment of the performance of in
                                   vitro diagnostic examination procedures
1168
       EN ISO 14155:2011           Clinical investigation of medical devices for       NCT   63 377 93/42/EEC   MS
                                   human subjects - Good clinical practice (ISO
1169                               14155:2011)
       EN ISO 14408:2009           Tracheal tubes designed for laser surgery -         NCT   11 377 93/42/EEC   MS
                                   Requirements for marking and accompanying
                                   information (ISO 14408:2005)
1170
       EN ISO 14602:2010           Non-active surgical implants - Implants for         NCT   16 377 93/42/EEC   MS
                                   osteosynthesis - Particular requirements (ISO
1171                               14602:2010)
       EN ISO 14607:2009           Non-active surgical implants - Mammary              NCT   32 377 93/42/EEC   MS
                                   implants - Particular requirements (ISO
1172                               14607:2007)
       EN ISO 14630:2009           Non-active surgical implants - General              NCT   19 377 93/42/EEC   MS
1173                               requirements (ISO 14630:2008)
       EN 14683:2005               Surgical masks - Requirements and test              NCT   16 377 93/42/EEC   MS
1174                               methods
       EN 14820:2004               Single-use containers for human venous              NCT   19 377 98/79/EC    MS
1175                               blood specimen collection




                                                Pagina 147 din 346
       EN ISO 14937:2009     Sterilization of health care products - General NCT    43 377 93/42/EEC   MS
                             requirements for characterization of a
                             sterilizing agent and the development,
                             validation and routine control of a sterilization
                             process for medical devices (ISO 14937:2009)
1176
       EN ISO 14971:2009     Medical devices - Application of risk            NCT   88 377 93/42/EEC   MS
                             management to medical devices (ISO
                             14971:2007, Corrected version 2007-10-01)
1177
       EN ISO 15001:2010     Anaesthetic and respiratory equipment -          NCT   44 377 93/42/EEC   MS
                             Compatibility with oxygen (ISO 15001:2010)
1178
       EN ISO 15002:2008     Flow-metering devices for connection to        NCT     26 377 93/42/EEC   MS
                             terminal units of medical gas pipeline systems
1179                         (ISO 15002:2008)
       EN ISO 15193:2009     In vitro diagnostic medical devices -            NCT   23 377 98/79/EC    MS
                             Measurement of quantities in samples of
                             biological origin - Requirements for content
                             and presentation of reference measurement
                             procedures (ISO 15193:2009)
1180
       EN ISO 15194:2009     In vitro diagnostic medical devices -            NCT   20 377 98/79/EC    MS
                             Measurement of quantities in samples of
                             biological origin - Requirements for certified
                             reference materials and the content of
                             supporting documentation (ISO 15194:2009)
1181
       EN ISO 15197:2003     In vitro diagnostic test systems -               FCT   37 377 98/79/EC    MS
                             Requirements for blood-glucose monitoring
                             systems for self-testing in managing diabetes
                             mellitus (ISO 15197:2003)
1182
       EN ISO 15747:2010     Plastic containers for intravenous injections    NCT   18 377 93/42/EEC   MS
1183                         (ISO 15747:2010)
       EN ISO 15883-1:2009   Washer-disinfectors - Part 1: General            NCT   78 377 93/42/EEC   MS
                             requirements, terms and definitions and tests
1184                         (ISO 15883-1:2006)
       EN ISO 15883-2:2009   Washer-disinfectors - Part 2: Requirements       NCT   16 377 93/42/EEC   MS
                             and tests for washer-disinfectors employing
                             thermal disinfection for surgical instruments,
                             anaesthetic equipment, bowls, dishes,
                             receivers, utensils, glassware, etc. (ISO
                             15883-2:2006)
1185
       EN ISO 15883-3:2009   Washer-disinfectors - Part 3: Requirements       NCT   17 377 93/42/EEC   MS
                             and tests for washer-disinfectors employing
                             thermal disinfection for human waste
                             containers (ISO 15883-3:2006)
1186
       EN ISO 15883-4:2009   Washer-disinfectors - Part 4: Requirements       NCT   55 377 93/42/EEC   MS
                             and tests for washer-disinfectors employing
                             chemical disinfection for thermolabile
                             endoscopes (ISO 15883-4:2008)
1187
       EN ISO 15883-6:2011   Washer-disinfectors - Part 6: Requirements       TR    12 377 93/42/EEC   MS
                             and tests for washer-disinfectors employing
                             thermal disinfection for non-invasive, non-
                             critical medical devices and healthcare
                             equipment (ISO 15883-6:2011)
1188
       EN 15908:2010         Anaesthetic and respiratory equipment - Non-     NCT   18 377 93/42/EEC   MS
                             interchangeable screw-threaded (NIST) low-
                             pressure connectors for medical gases
1189
       EN 15986:2011         Symbol for use in the labelling of medical       TR    13 377 93/42/EEC   MS
                             devices - Requirements for labelling of
1190                         medical devices containing phthalates
       EN ISO 16061:2009     Instrumentation for use in association with      NCT   22 377 93/42/EEC   MS
                             non-active surgical implants - General
                             requirements (ISO 16061:2008, Corrected
1191                         version 2009-03-15)



                                         Pagina 148 din 346
       EN ISO 16201:2006     Technical aids for disabled persons -            NCT     13 377 93/42/EEC   MS
                             Environmental control systems for daily living
1192                         (ISO 16201:2006)
       EN ISO 17510-1:2009   Sleep apnoea breathing therapy - Part 1:         NCT     41 377 93/42/EEC   MS
                             Sleep apnoea breathing therapy equipment
1193                         (ISO 17510-1:2007)
       EN ISO 17510-2:2009   Sleep apnoea breathing therapy - Part 2:         NCT     34 377 93/42/EEC   MS
                             Masks and application accessories (ISO
1194                         17510-2:2007)
       EN ISO 17511:2003     In vitro diagnostic medical devices -            FCT     29 377 98/79/EC    MS
                             Measurement of quantities in biological
                             samples - Metrological traceability of values
                             assigned to calibrators and control materials
1195                         (ISO 17511:2003)
       EN ISO 18113-1:2009   In vitro diagnostic medical devices -            NCT     54 377 98/79/EC    MS
                             Information supplied by the manufacturer
                             (labelling) - Part 1: Terms, definitions and
1196                         general requirements (ISO 18113-1:2009)
       EN ISO 18113-2:2009   In vitro diagnostic medical devices -              NCT   16 377 98/79/EC    MS
                             Information supplied by the manufacturer
                             (labelling) - Part 2: In vitro diagnostic reagents
                             for professional use (ISO 18113-2:2009)
1197
       EN ISO 18113-3:2009   In vitro diagnostic medical devices -            NCT     14 377 98/79/EC    MS
                             Information supplied by the manufacturer
                             (labelling) - Part 3: In vitro diagnostic
                             instruments for professional use (ISO 18113-
1198                         3:2009)
       EN ISO 18113-4:2009   In vitro diagnostic medical devices -              NCT   16 377 98/79/EC    MS
                             Information supplied by the manufacturer
                             (labelling) - Part 4: In vitro diagnostic reagents
                             for self-testing (ISO 18113-4:2009)
1199
       EN ISO 18113-5:2009   In vitro diagnostic medical devices -            NCT     13 377 98/79/EC    MS
                             Information supplied by the manufacturer
                             (labelling) - Part 5: In vitro diagnostic
                             instruments for self-testing (ISO 18113-
1200                         5:2009)
       EN ISO 18777:2009     Transportable liquid oxygen systems for          NCT     31 377 93/42/EEC   MS
                             medical use - Particular requirements (ISO
1201                         18777:2005)
       EN ISO 18778:2009     Respiratory equipment - Infant monitors -        NCT     32 377 93/42/EEC   MS
1202                         Particular requirements (ISO 18778:2005)
       EN ISO 18779:2005     Medical devices for conserving oxygen and        NCT     30 377 93/42/EEC   MS
                             oxygen mixtures - Particular requirements
1203                         (ISO 18779:2005)
       EN ISO 19054:2006     Rail systems for supporting medical              NCT     26 377 93/42/EEC   MS
1204                         equipment (ISO 19054:2005)
       EN ISO 20072:2010     Aerosol drug delivery device design              NCT     48 377 93/42/EEC   MS
                             verification - Requirements and test methods
1205                         (ISO 20072:2009)
       EN ISO 20776-1:2006   Clinical laboratory testing and in vitro         NCT     22 377 98/79/EC    MS
                             diagnostic test systems - Susceptibility testing
                             of infectious agents and evaluation of
                             performance of antimicrobial susceptibility
                             test devices - Part 1: Reference method for
                             testing the in vitro activity of antimicrobial
                             agents against rapidly growing aerobic
                             bacteria involved in infectious diseases (ISO
                             20776-1:2006)

1206
       EN ISO 21171:2006     Medical gloves - Determination of removable      NCT     11 377 93/42/EEC   MS
                             surface powder (ISO 21171:2006)
1207
       EN ISO 21534:2009     Non-active surgical implants - Joint             NCT     18 377 93/42/EEC   MS
                             replacement implants - Particular
1208                         requirements (ISO 21534:2007)
       EN ISO 21535:2009     Non-active surgical implants - Joint             NCT     14 377 93/42/EEC   MS
                             replacement implants - Specific requirements
                             for hip-joint replacement implants (ISO
1209                         21535:2007)




                                         Pagina 149 din 346
       EN ISO 21536:2009       Non-active surgical implants - Joint               NCT   10 377 93/42/EEC   MS
                               replacement implants - Specific requirements
                               for knee-joint replacement implants (ISO
1210                           21536:2007)
       EN ISO 21647:2009       Medical electrical equipment - Particular          NCT   49 377 93/42/EEC   MS
                               requirements for the basic safety and
                               essential performance of respiratory gas
                               monitors (ISO 21647:2004, including Cor
1211                           1:2005)
       EN ISO 21649:2009       Needle-free injectors for medical use -            NCT   37 377 93/42/EEC   MS
                               Requirements and test methods (ISO
1212                           21649:2006)
       EN ISO 21969:2009       High-pressure flexible connections for use         NCT   17 377 93/42/EEC   MS
                               with medical gas systems (ISO 21969:2009)
1213
       EN ISO 22413:2011       Transfer sets for pharmaceutical preparations TR         18 377 93/42/EEC   MS
                               - Requirements and test methods (ISO
1214                           22413:2010)
       EN ISO 22442-1:2007     Medical devices utilizing animal tissues and       NCT   30 377 93/42/EEC   MS
                               their derivatives - Part 1: Application of risk
1215                           management (ISO 22442-1:2007)
       EN ISO 22442-2:2007     Medical devices utilizing animal tissues and  NCT        20 377 93/42/EEC   MS
                               their derivatives - Part 2: Controls on
                               sourcing, collection and handling (ISO 22442-
1216                           2:2007)
       EN ISO 22442-3:2007     Medical devices utilizing animal tissues and       NCT   26 377 93/42/EEC   MS
                               their derivatives - Part 3: Validation of the
                               elimination and/or inactivation of viruses and
                               transmissible spongiform encephalopathy
                               (TSE) agents (ISO 22442-3:2007)
1217
       EN ISO 22675:2006       Prosthetics - Testing of ankle-foot devices        NCT   95 377 93/42/EEC   MS
                               and foot units - Requirements and test
1218                           methods (ISO 22675:2006)
       EN ISO 23328-1:2008     Breathing system filters for anaesthetic and       NCT   17 377 93/42/EEC   MS
                               respiratory use - Part 1: Salt test method to
                               assess filtration performance (ISO 23328-
1219                           1:2003)
       EN ISO 23328-2:2009     Breathing system filters for anaesthetic and       NCT   10 377 93/42/EEC   MS
                               respiratory use - Part 2: Non-filtration aspects
1220                           (ISO 23328-2:2002)
       EN ISO 23747:2009       Anaesthetic and respiratory equipment - Peak NCT         30 377 93/42/EEC   MS
                               expiratory flow meters for the assessment of
                               pulmonary function in spontaneously
                               breathing humans (ISO 23747:2007)
1221
       EN ISO 23908:2011       Sharps injury protection - Requirements and        TR    16 377 93/42/EEC   MS
                               test methods - Sharps protection features for
                               single-use hypodermic needles, introducers
                               for catheters and needles used for blood
                               sampling (ISO 23908:2011)
1222
       EN ISO 25424:2011       Sterilization of medical devices - Low         TR        43 377 93/42/EEC   MS
                               temperature steam and formaldehyde -
                               Requirements for development, validation and
                               routine control of a sterilization process for
                               medical devices (ISO 25424:2009)
1223
       EN ISO 25539-1:2009     Cardiovascular implants - Endovascular             NCT   92 377 93/42/EEC   MS
                               devices - Part 1: Endovascular prostheses
                               (ISO 25539-1:2003 including Amd 1:2005)
1224
       EN ISO 25539-2:2009     Cardiovascular implants - Endovascular             NCT   98 377 93/42/EEC   MS
                               devices - Part 2: Vascular stents (ISO 25539-
1225                           2:2008)
       EN ISO 26782:2009       Anaesthetic and respiratory equipment -            NCT   33 377 93/42/EEC   MS
                               Spirometers intended for the measurement of
                               time forced expired volumes in humans (ISO
1226                           26782:2009)
       EN 27740:1992/AC:1996   Instruments for surgery, scalpels with             FCT    4 377 93/42/EEC   MS
                               detachable blades, fitting dimensions (ISO
1227                           7740:1985)



                                            Pagina 150 din 346
       EN ISO 80369-1:2010       Small bore connectors for liquids and gases         NCT    20 377 93/42/EEC    MS
                                 in healthcare applications - Part 1: General
1228                             requirements (ISO 80369-1:2010)
       EN ISO 80601-2-12:2011    Medical electrical equipment - Part 2-12:           TR     83 377 93/42/EEC    MS
                                 Particular requirements for basic safety and
                                 essential performance of critical care
1229                             ventilators (ISO 80601-2-12:2011)
       EN ISO 80601-2-61:2011    Medical electrical equipment - Part 2-61:           TR     86 377 93/42/EEC    MS
                                 Particular requirements for basic safety and
                                 essential performance of pulse oximeter
                                 equipment (ISO 80601-2-61:2011)
1230
       EN 50122-2:2010           Railway applications - Fixed installations -        TR     29   4 2008/57/EC   MTI
                                 Electrical safety, earthing and the return
                                 circuit -- Part 2: Provisions against the effects
                                 of stray currents caused by d.c. traction
1231                             systems
       EN 50122-3:2010           Railway applications - Fixed installations -        TR     29   4 2008/57/EC   MTI
                                 Electrical safety, earthing and the return
                                 circuit -- Part 3: Mutual Interaction of a.c. and
1232                             d.c. traction systems
       EN 50122-1:2011           Railway applications - Fixed installations -        TR     81   4 2008/57/EC   MTI
                                 Electrical safety, earthing and the return
                                 circuit -- Part 1: Protective provisions against
1233                             electric shock
       EN 50159:2010             Railway applications - Communication,               NCT    64   4 2008/57/EC   MTI
                                 signalling and processing systems - Safety-
                                 related communication in transmission
1234                             systems
       EN 12080:2007+A1:2010     Railway applications - Axleboxes - Rolling          NCT    37 146 2008/57/EC   MTI
1235                             bearings
       EN 12081:2007+A1:2010     Railway applications - Axleboxes - Lubricating      NCT    16 146 2008/57/EC   MTI
1236                             greases
       EN 12082:2007+A1:2010     Railway applications - Axleboxes -                  NCT    30 146 2008/57/EC   MTI
1237                             Performance testing
       EN 12663-1:2010           Railway applications - Structural requirements      NCT    39 146 2008/57/EC   MTI
                                 of railway vehicle bodies - Part 1:
                                 Locomotives and passenger rolling stock (and
                                 alternative method for freight wagons)
1238
       EN 12663-2:2010           Railway applications - Structural requirements NCT         50 146 2008/57/EC   MTI
                                 of railway vehicle bodies - Part 2: Freight
1239                             wagons
       EN 13103:2009+A1:2010     Railway applications - Wheelsets and bogies - NCT          45 146 2008/57/EC   MTI
                                 Non-powered axles - Design method
1240
       EN 13104:2009+A1:2010     Railway applications - Wheelsets and bogies - NCT          44 146 2008/57/EC   MTI
1241                             Powered axles - Design method
       EN 13260:2009+A1:2010     Railway applications - Wheelsets and bogies - NCT          37 146 2008/57/EC   MTI
                                 Wheelsets - Product requirements
1242
       EN 13261:2009+A1:2010     Railway applications - Wheelsets and bogies - NCT          57 146 2008/57/EC   MTI
1243                             Axles - Product requirements
       EN 13262:2004+A2:2011     Railway applications - Wheelsets and bogies - TR           48 146 2008/57/EC   MTI
1244                             Wheels - Product requirements
       EN 13674-1:2011           Railway applications - Track - Rail - Part 1: NCT         108 146 2008/57/EC   MTI
                                 Vignole railway rails 46 kg/m and above
1245
       EN 13674-2:2006+A1:2010   Railway applications - Track - Rail - Part 2:       NCT   110 146 2008/57/EC   MTI
                                 Switch and crossing rails used in conjunction
                                 with Vignole railway rails 46 kg/m and above
1246
       EN 13674-3:2006+A1:2010   Railway applications - Track - Rail - Part 3: NCT          23 146 2008/57/EC   MTI
1247                             Check rails
       EN 13715:2006+A1:2010     Railway applications - Wheelsets and bogies - NCT          28 146 2008/57/EC   MTI
1248                             Wheels - Tread profile
       EN 13749:2011             Railway applications - Wheelsets and bogies - TR           53 146 2008/57/EC   MTI
                                 Method of specifying the structural
1249                             requirements of bogie frames




                                              Pagina 151 din 346
       EN 13803-1:2010           Railway applications - Track - Track alignment NCT       70 146 2008/57/EC   MTI
                                 design parameters - Track gauges 1435 mm
                                 and wider - Part 1: Plain line
1250
       EN 13848-5:2008+A1:2010   Railway applications - Track - Track geometry NCT        22 146 2008/57/EC   MTI
                                 quality - Part 5: Geometric quality levels -
1251                             Plain line
       EN 13979-1:2003+A2:2011   Railway applications - Wheelsets and bogies - TR         50 146 2008/57/EC   MTI
                                 Monobloc wheels - Technical approval
                                 procedure - Part 1: Forged and rolled wheels
1252
       EN 14033-1:2011           Railway applications - Track - Railbound          NCT    73 146 2008/57/EC   MTI
                                 construction and maintenance machines -
                                 Part 1: Technical requirements for running
1253
       EN 14067-5:2006+A1:2010   Railway applications - Aerodynamics - Part 5:     NCT    35 146 2008/57/EC   MTI
                                 Requirements and test procedures for
1254                             aerodynamics in tunnels
       EN 14067-6:2010           Railway applications - Aerodynamics - Part 6:     NCT   124 146 2008/57/EC   MTI
                                 Requirements and test procedures for cross
1255                             wind assessment
       EN 14531-6:2009           Railway applications - Methods for calculation NCT       57 146 2008/57/EC   MTI
                                 of stopping and slowing distances and
                                 immobilisation braking - Part 6: Step by step
                                 calculations for train sets or single vehicles
1256
       EN 14535-1:2005+A1:2011   Railway applications - Brake discs for railway    TR     29 146 2008/57/EC   MTI
                                 rolling stock - Part 1: Brake discs pressed or
                                 shrunk onto the axle or drive shaft,
                                 dimensions and quality requirements
1257
       EN 14535-2:2011           Railway applications - Brake discs for railway    TR     27 146 2008/57/EC   MTI
                                 rolling stock - Part 2: Brake discs mounted
                                 onto the wheel, dimensions and quality
1258                             requirements
       EN 14587-2:2009           Railway applications - Track - Flash butt         NCT    40 146 2008/57/EC   MTI
                                 welding of rails - Part 2: New R220, R260,
                                 R260Mn and R350HT grade rails by mobile
                                 welding machines at sites other than a fixed
1259                             plant
       EN 14601:2005+A1:2010     Railway applications - Straight and angled        NCT    36 146 2008/57/EC   MTI
                                 end cocks for brake pipe and main reservoir
1260                             pipe
       EN 14813-1:2006+A1:2010   Railway applications - Air conditioning for       NCT    24 146 2008/57/EC   MTI
                                 driving cabs - Part 1: Comfort parameters
1261
       EN 14813-2:2006+A1:2010   Railway applications - Air conditioning for       NCT    28 146 2008/57/EC   MTI
1262                             driving cabs - Part 2: Type tests
       EN 14865-1:2009+A1:2010   Railway applications - Axlebox lubricating        NCT    21 146 2008/57/EC   MTI
                                 greases - Part 1: Method to test the ability to
1263                             lubricate
       EN 14865-2:2006+A2:2010   Railway applications - Axlebox lubricating        NCT    20 146 2008/57/EC   MTI
                                 greases - Part 2: Method to test the
                                 mechanical stability to cover vehicle speeds
1264                             up to 200 km/h
       EN 15020:2006+A1:2010     Railway applications - Rescue coupler -           NCT    26 146 2008/57/EC   MTI
                                 Performance requirements, specific interface
1265                             geometry and test methods
       EN 15220-1:2008+A1:2011   Railway applications - Brake indicators - Part    TR     33 146 2008/57/EC   MTI
                                 1: Pneumatically operated brake indicators
1266
       EN 15227:2008+A1:2010     Railway applications - Crashworthiness            NCT    39 146 2008/57/EC   MTI
1267                             requirements for railway vehicle bodies
       EN 15273-2:2009           Railway applications - Gauges - Part 2:           NCT   207 146 2008/57/EC   MTI
1268                             Rolling stock gauge
       EN 15273-3:2009           Railway applications - Gauges - Part 3:           NCT   170 146 2008/57/EC   MTI
1269                             Structure gauges
       EN 15302:2008+A1:2010     Railway applications - Method for determining     NCT   124 146 2008/57/EC   MTI
1270                             the equivalent conicity




                                              Pagina 152 din 346
       EN 15313:2010           Railway applications - In-service wheelset       NCT   67 146 2008/57/EC   MTI
                               operation requirements - In-service and off-
                               vehicle wheelset maintenance
1271
       EN 15355:2008+A1:2010   Railway applications - Braking - Distributor     NCT   65 146 2008/57/EC   MTI
                               valves and distributor-isolating devices
1272
       EN 15427:2008+A1:2010   Railway applications - Wheel/rail friction       NCT   29 146 2008/57/EC   MTI
1273                           management - Flange lubrication
       EN 15437-1:2009         Railway applications - Axlebox condition         NCT   25 146 2008/57/EC   MTI
                               monitoring - Interface and design
                               requirements - Part 1: Track side equipment
1274                           and rolling stock axlebox
       EN 15461:2008+A1:2010   Railway applications - Noise emission -          NCT   18 146 2008/57/EC   MTI
                               Characterisation of the dynamic properties of
                               track sections for pass by noise
1275                           measurements
       EN 15551:2009+A1:2010   Railway applications - Railway rolling stock -   NCT   72 146 2008/57/EC   MTI
1276                           Buffers
       EN 15566:2009+A1:2010   Railway applications - Railway rolling stock -   NCT   68 146 2008/57/EC   MTI
1277                           Draw gear and screw coupling
       EN 15594:2009           Railway applications - Track - Restoration of    NCT   33 146 2008/57/EC   MTI
                               rails by electric arc welding
1278
       EN 15595:2009+A1:2011   Railway applications - Braking - Wheel slide     TR    68 146 2008/57/EC   MTI
1279                           protection
       EN 15610:2009           Railway applications - Noise emission - Rail     NCT   35 146 2008/57/EC   MTI
                               roughness measurement related to rolling
1280                           noise generation
       EN 15611:2008+A1:2010   Railway applications - Braking - Relay valves    NCT   58 146 2008/57/EC   MTI
1281
       EN 15612:2008+A1:2010   Railway applications - Braking - Brake pipe      NCT   28 146 2008/57/EC   MTI
1282                           accelerator valve
       EN 15624:2008+A1:2010   Railway applications - Braking - Empty-loaded    NCT   32 146 2008/57/EC   MTI
1283                           changeover devices
       EN 15625:2008+A1:2010   Railway applications - Braking - Automatic       NCT   31 146 2008/57/EC   MTI
1284                           variable load sensing devices
       EN 15663:2009           Railway applications - Definition of vehicle     NCT   16 146 2008/57/EC   MTI
1285                           reference masses
       EN 15686:2010           Railway applications - Testing for the           NCT   26 146 2008/57/EC   MTI
                               acceptance of running characteristics of
                               railway vehicles with cant deficiency
                               compensation system and/or vehicles
                               intended to operate with higher cant
                               deficiency than stated in EN 14363:2005,
1286                           Annex G
       EN 15687:2010           Railway applications - Testing for the           NCT   18 146 2008/57/EC   MTI
                               acceptance of running characteristics of
                               freight vehicles with static axle loads higher
1287                           than 225 kN and up to 250 kN
       EN 15723:2010           Railway applications - Closing and locking       NCT   29 146 2008/57/EC   MTI
                               devices for payload protecting devices
                               against environmental influences -
                               Requirements for durability, operation,
1288                           indication, maintenance, recycling
       EN 15734-1:2010         Railway applications - Braking systems of        NCT   52 146 2008/57/EC   MTI
                               high speed trains - Part 1: Requirements and
1289                           definitions
       EN 15734-2:2010         Railway applications - Braking systems of        NCT   64 146 2008/57/EC   MTI
                               high speed trains - Part 2: Test methods
1290
       EN 15746-1:2010         Railway applications - Track - Road-rail         NCT   78 146 2008/57/EC   MTI
                               machines and associated equipment - Part 1:
                               Technical requirements for running and
1291                           working
       EN 15806:2010           Railway applications - Braking - Static brake    NCT   25 146 2008/57/EC   MTI
1292                           testing
       EN 15807:2011           Railway applications - Pneumatic half            NCT   50 146 2008/57/EC   MTI
1293                           couplings
       EN 15827:2011           Railway applications - Requirements for          TR    80 146 2008/57/EC   MTI
1294                           bogies and running gears




                                            Pagina 153 din 346
       EN 15892:2011               Railway applications - Noise Emission -         NCT     15 146 2008/57/EC   MTI
                                   Measurement of noise inside driver's cabs
1295
       EN ISO 6185-4:2011          Inflatable boats - Part 4: Boats with a hull TR         32 199 94/25/EC     MTI
                                   length of between 8 m and 24 m with a motor
                                   power rating of 15 kW and greater (ISO 6185-
1296                               4:2011)
       EN ISO 10088:2009           Small craft - Permanently installed fuel         NCT    13 199 94/25/EC     MTI
1297                               systems (ISO 10088:2009)
       EN ISO 10239:2008           Small craft - Liquefied petroleum gas (LPG)      NCT    19 199 94/25/EC     MTI
1298                               systems (ISO 10239:2008)
       EN ISO 12215-5:2008         Small craft - Hull construction and scantlings - NCT   112 199 94/25/EC     MTI
                                   Part 5: Design pressures for monohulls,
                                   design stresses, scantlings determination
1299                               (ISO 12215-5:2008)
       EN ISO 12215-6:2008         Small craft - Hull construction and scantlings - NCT    55 199 94/25/EC     MTI
                                   Part 6: Structural arrangements and details
                                   (ISO 12215-6:2008)
1300
       EN ISO 14509-1:2008         Small craft - Airborne sound emitted by      NCT        22 199 94/25/EC     MTI
                                   powered recreational craft - Part 1: Pass-by
                                   measurement procedures (ISO 14509-1:2008)
1301
       EN ISO 14509-3:2009         Small craft - Airborne sound emitted by    NCT          15 199 94/25/EC     MTI
                                   powered recreational craft - Part 3: Sound
                                   assessment using calculation and
                                   measurement procedures (ISO 14509-3:2009)
1302
       EN ISO 21487:2006/AC:2009   Small craft - Permanently installed petrol and NCT       3 199 94/25/EC     MTI
                                   diesel fuel tanks (ISO 21487:2006/Cor 1:2008)
1303
       EN 15609:2008               LPG equipment and accessories - LPG             NCT     35 231 94/25/EC     MTI
                                   propulsion systems for boats, yachts and
1304                               other craft - Installation requirements
       EN 12665:2011               Light and lighting - Basic terms and criteria for TR    48 240 2008/57/EC   MTI
                                   specifying lighting requirements
1305




                                               Pagina 154 din 346
                                           SECTIUNEA 3, a)-ACTIV
  Programul de standardizare european CEN-CENELEC cu proiectele standardelor
Nr                                                                                                                         Mini-
      CT            Indicativ EN                                   Titlul in limba engleza
crt                                                                                                                        ster
       95 prEN ISO 4833-1 rev        Microbiology of food and animal feeding stuffs - Horizontal method for the           MADR
                                     enumeration of microorganisms - Colony-count technique at 30 degrees C
  1
       95 EN ISO 16050:2011          Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, MADR
                                     B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid
  2                                  chromatographic method (ISO 16050:2003)
       95 prEN ISO 16140-1 rev       Microbiology of food and animal feeding stuffs - Protocol for the validation of      MADR
                                     alternative methods - Part 1: Terminology of method validation
  3
       95 prEN ISO 16140-2 rev       Microbiology of food and animal feeding stuffs - Protocol for the validation of      MADR
                                     alternative methods - Part 2: Protocol for the validation of proprietary methods
  4                                  against a reference method
       95 EN ISO 21569:2005/prA1     Foodstuffs - Methods of analysis for the detection of genetically modified           MADR
                                     organisms and derived products - Qualitative nucleic acid based methods
  5
       95 EN ISO 21571:2005/prA1     Foodstuffs - Methods of analysis for the detection of genetically modified           MADR
  6                                  organisms and derived products - Nucleic acid extraction
      180 FprEN ISO 3961             Animal and vegetable fats and oils - Determination of iodine value (ISO              MADR
  7                                  3961:2009)
  8 285    FprEN 13037               Soil improvers and growing media - Determination of pH                               MADR
    285    FprEN 13038               Soil improvers and growing media - Determination of electrical conductivity          MADR
  9
    285    FprEN 13039               Soil improvers and growing media - Determination of organic content and ash          MADR
 10
    285    FprEN 13041               Soil improvers and growing media - Determination of physical properties - Dry        MADR
                                     bulk density, air volume, water volume, shrinkage value and total pore space
 11
      216 FprEN 671-1 rev            Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid       MAI
 12                                  hose
      216 FprEN 671-2 rev            Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat       MAI
 13                                  hose
      216 prEN 1866-2                Mobile fire extinguishers - Part 2: Additional requirements to EN 1866-1 for the     MAI
                                     construction, resistance to pressure and mechanical tests for extinguishers with
                                     a maximum allowable pressure equal to or lower than 30 bar
 14
      216 prEN 1866-3                Mobile fire extinguishers - Part 3: Additional requirements to EN 1866-1 for         MAI
 15                                  pressure resistance of CO2 extinguishers
      216 FprEN 12094-7 rev          Fixed firefighting systems - Components for gas extinguishing systems - Part 7:      MAI
 16                                  Requirements and test methods for nozzles for CO2 systems
      216 FprEN 12101-2 rev          Smoke and heat control systems - Part 2: Specification for natural smoke and         MAI
 17                                  heat exhaust ventilators
 18 217    prEN 1366-2               Fire resistance tests for service installations - Part 2: Fire dampers               MAI
    217    EN 15254-4:2008+A1:2011   Extended application of results from fire resistance tests - Non-loadbearing walls   MAI
 19                                  - Part 4: Glazed constructions
    207    prEN 14597 rev            Temperature control devices and temperature limiters for heat generating             MCSI
 20                                  systems
    207    FprEN 15232               Energy performance of buildings - Impact of Building Automation, Controls and        MCSI
 21                                  Building Management
    207    prEN 50491-4-1:2011       General requirements for Home and Building Electronic Systems, HBES and              MCSI
                                     Building Automation and Control Systems (BACS) -- Part 4-1: General functional
                                     safety requirements for products intended to be integrated in Building Electronic
                                     Systems (HBES) and Building Automation and Control Systems (BACS)
 22
      375 FprEN 50083-2:2011         Cable networks for television signals, sound signals and interactive services --     MCSI
 23                                  Part 2: Electromagnetic compatibility for equipment
 24 111    prEN 196-2 rev            Methods of testing cement – Part 2 Chemical analysis of cement                       MDRT
    111    FprEN 197-1               Cement - Part 1: Composition, specifications and conformity criteria for common      MDRT
 25                                  cements
    111    FprEN 13282-2             Hydraulic road binders - Part 2: Normal hardening hydraulic road binders -           MDRT
 26                                  Composition, specifications and conformity criteria
    111    prEN 13282-1              Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders -            MDRT
 27                                  Composition, specifications and conformity criteria
 28 111    prEN 13282-3              Hydraulic road binders - Part 3: Conformity evaluation                               MDRT
      113 FprEN 490                  Concrete roofing tiles and fittings for roof covering and wall cladding - Product    MDRT
 29                                  specifications
      113 FprEN 491                  Concrete roofing tiles and fittings for roof covering and wall cladding - Test       MDRT
 30                                  methods



                                               Pagina 155 din 346
31 113   prEN 492             Fibre-cement slates and fittings - Product specification and test methods           MDRT
   113   prEN 494             Fibre-cement profiled sheets and fittings - Product specification and test methods MDRT
32
   113   FprEN 1024           Clay roofing tiles for discontinuous laying - Determination of geometric            MDRT
33                            characteristics
   113   FprEN 12326-1 rev    Slate and stone for discontinuous roofing and external cladding - Part 1 :          MDRT
34                            Specifications for slate and carbonate slate.
35 113   prEN 12467           Fibre-cement flat sheets - Product specification and test methods                   MDRT
     113 prEN 13162           Thermal insulation products for buildings - Factory made mineral wool (MW)          MDRT
36                            products - Specification
     113 prEN 13163           Thermal insulation products for buildings - Factory made expanded polystyrene       MDRT
37                            (EPS) products - Specification
     113 prEN 13164           Thermal insulation products for buildings - Factory made extruded polystyrene       MDRT
38                            foam (XPS) products - Specification
     113 prEN 13165           Thermal insulation products for buildings - Factory made rigid polyurethane foam    MDRT
39                            (PU) products - Specification
     113 prEN 13166           Thermal insulation products for buildings - Factory made phenolic foam (PF)         MDRT
40                            products - Specification
     113 prEN 13167           Thermal insulation products for buildings - Factory made cellular glass (CG)        MDRT
41                            products - Specification
     113 prEN 13168           Thermal insulation products for buildings - Factory made wood wool (WW)             MDRT
42                            products - Specification
     113 prEN 13169           Thermal insulation products for buildings - Factory made expanded perlite board     MDRT
43                            (EPB) products - Specification
     113 prEN 13170           Thermal insulation products for buildings - Factory made products of expanded       MDRT
44                            cork (ICB) - Specification
     113 prEN 13171           Thermal insulation products for buildings - Factory made wood fibre (WF)            MDRT
45                            products - Specification
46 113 FprEN 13172            Thermal insulation products - Evaluation of conformity                              MDRT
   113 FprEN 13967 rev        Flexible sheets for waterproofing - Plastic and rubber damp proof sheets            MDRT
                              including plastic and rubber basement tanking sheet - Definitions and
47                            characteristics
     113 prEN 14909 rev       Flexible sheets for waterproofing - Plastic and rubber damp proof courses -         MDRT
48                            Definitions and characteristics
49 114 FprEN 31               Wash basins - Connecting dimensions                                                 MDRT
50 114 FprEN 33               WC pans and WC suites - Connecting dimensions                                       MDRT
51 114   FprEN 997            WC pans and WC suites with integral trap                                            MDRT
   114   FprEN ISO 10545-16   Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-      MDRT
52                            16:2010)
   114   FprEN ISO 10545-4    Ceramic tiles - Part 4: Determination of modulus of rupture and breaking            MDRT
53                            strength (ISO 10545-4:2004)
   114   FprEN ISO 10545-6    Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed   MDRT
54                            tiles (ISO 10545-6:2010)
   114   FprEN 14411 rev      Ceramic tiles - Definitions, classification, characteristics, evaluation of         MDRT
55                            conformity and marking
   114   FprEN 14891 rev      Liquid-applied water impermeable products for use beneath ceramic tiling            MDRT
                              bonded with adhesives - Requirements, test methods, evaluation of conformity,
56                            classification and designation
     115 FprEN 1341           Slabs of natural stone for external paving - Requirements and test methods          MDRT
57
     115 FprEN 1342           Setts of natural stone for external paving - Requirements and test methods          MDRT
58
     115 FprEN 1343           Kerbs of natural stone for external paving - Requirements and test methods          MDRT
59
60 115 FprEN 1344             Clay pavers - Requirements and test methods                                         MDRT
61 115 FprEN 1467 rev         Natural stones - Rough blocks - Requirements                                        MDRT
62 115 FprEN 1468 rev         Natural stones - Rough slabs - Requirements                                         MDRT
63 115 EN 12059:2008/FprA1    Natural stone products - Dimensional stone work - Requirements                      MDRT
     115 FprEN 14617-10       Agglomerated stone - Test methods - Part 10: Determination of chemical              MDRT
64                            resistance
     115 FprEN 14617-12       Agglomerated stone - Test methods - Part 12: Determination of dimensional           MDRT
65                            stability
     115 FprEN 14617-4        Agglomerated stone - Test methods - Part 4: Determination of the abrasion           MDRT
66                            resistance
     115 FprEN 14617-5        Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw        MDRT
67                            resistance
     115 FprEN 14617-6        Agglomerated stone - Test methods - Part 6: Determination of thermal shock          MDRT
68                            resistance
69 122 FprEN 1096-1           Glass in building - Coated glass - Part 1: Definitions and classification           MDRT




                                        Pagina 156 din 346
      122 FprEN 1096-2            Glass in building - Coated glass - Part 2: Requirements and test methods for          MDRT
 70                               class A, B and S coatings
      122 FprEN 1096-3            Glass in building - Coated glass - Part 3: Requirements and test methods for          MDRT
 71                               class C and D coatings
      122 FprEN 1863-1            Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition   MDRT
 72                               and description
      122 FprEN ISO 12543-1       Glass in building - Laminated glass and laminated safety glass - Part 1:              MDRT
 73                               Definitions and description of component parts (ISO/DIS 12543-1:2008)
      122 FprEN ISO 12543-2 rev   Glass in building - Laminated glass and laminated safety glass - Part 2:              MDRT
 74                               Laminated safety glass (ISO/FDIS 12543-2:2011)
      122 FprEN ISO 12543-3 rev   Glass in building - Laminated glass and laminated safety glass - Part 3:              MDRT
 75                               Laminated glass (ISO/FDIS 12543-1:2011)
      122 FprEN ISO 12543-4 rev   Glass in building - Laminated glass and laminated safety glass - Part 4: Test         MDRT
 76                               methods for durability (ISO/FDIS 12543-4:2011)
      122 FprEN ISO 12543-5 rev   Glass in building - Laminated glass and laminated safety glass - Part 5:              MDRT
 77                               Dimensions and edge finishing (ISO/FDIS 12543-5:2011)
      122 FprEN ISO 12543-6 rev   Glass in building - Laminated glass and laminated safety glass - Part 6:              MDRT
 78                               Appearance (ISO/FDIS 12543-6:2011)
      122 FprEN 13024-1           Glass in building - Thermally toughened borosilicate safety glass - Part 1:           MDRT
 79                               Definition and description
      122 FprEN 13541             Glass in building - Security glazing - Testing and classification of resistance       MDRT
 80                               against explosion pressure
      186 FprEN 295-1             Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for          MDRT
 81                               pipes, fittings and joints
      186 FprEN 295-2             Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of             MDRT
 82                               conformity and sampling
 83 186   FprEN 295-3             Vitrified clay pipe systems for drains and sewers - Part 3: Test methods              MDRT
    186   FprEN 295-4             Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for          MDRT
 84                               adaptors, connectors and flexible couplings
    186   FprEN 295-5             Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for          MDRT
 85                               perforated pipes and fittings
    186   FprEN 295-6             Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for          MDRT
 86                               components of manholes and inspection chambers
    186   FprEN 295-7             Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for          MDRT
 87                               pipes and joints for pipe jacking
    186   prEN 13508-1 rev        Investigation and assessment of drain and sewer systems outside buildings -           MDRT
 88                               Part 1: General Requirements
    187   FprEN 1423              Road marking materials - Drop on materials - Glass beads, antiskid aggregates         MDRT
 89                               and mixtures of the two
 90 187   FprEN 1790              Road marking materials - Preformed road markings                                      MDRT
      187 FprEN 12697-11 rev      Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination       MDRT
 91                               of the affinity between aggregate and bitumen
      187 FprEN 12697-19          Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of     MDRT
 92                               specimen
      187 FprEN 12697-20          Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation         MDRT
 93                               using cube or Marshall specimens
      187 FprEN 12697-24 rev      Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to       MDRT
 94                               fatigue
      187 FprEN 12697-26          Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness           MDRT
 95
      187 FprEN 12697-30          Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen            MDRT
 96                               preparation by impact compactor
      187 FprEN 12697-6 rev       Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination        MDRT
 97                               of bulk density of bituminous specimens
      187 prEN 12697-3 rev        Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen              MDRT
 98                               recovery: Rotary evaporator
      187 prEN 12697-35 rev       Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory          MDRT
 99                               mixing
      187 prEN 12697-39 rev       Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content      MDRT
100                               by ignition
      187 prEN 12697-4 rev        Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen              MDRT
101                               recovery: Fractionating column
      187 prEN 12697-41 rev       Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to       MDRT
102                               de-icing fluids
      187 prEN 12697-43 rev       Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to       MDRT
103                               fuel
      187 FprEN 13863-4 rev       Concrete pavements - Part 4: Test methods for the determination of wear               MDRT
104                               resistance of concrete pavements to studded tyres
105 187 prEN 14388                Road traffic noise reducing devices - Specifications                                  MDRT
    276 prEN ISO 16283            Acoustics - Measurement of sound insulation in buildings and of building              MDRT
106                               elements - Field measurements




                                            Pagina 157 din 346
      281 prEN ISO 12569           Thermal performance of buildings and materials - Determination of specific           MDRT
                                   airflow rate in buildings - Tracer gas dilution method (ISO/DIS 12569:2010)
107
      281 prEN ISO 12631           Thermal performance of curtain walling - Calculation of thermal transmittance        MDRT
108                                (ISO/DIS 12631:2010)
      281 prEN ISO 13791           Thermal performance of buildings - Calculation of internal temperatures of a         MDRT
                                   room in summer without mechanical cooling - General criteria and validation
109                                procedures (ISO/DIS 13791:2010)
      281 prEN ISO 13792           Thermal performance of buildings - Calculation of internal temperatures of a         MDRT
                                   room in summer without mechanical cooling - Simplified methods (ISO/DIS
110                                13792:2010)
111 302   prEN 442-3 rev           Radiators and convectors - Part 3: Evaluation of conformity                          MDRT
    302   prEN 1751                Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper     MDRT
112                                and valves
    302   FprEN 12977-3            Thermal solar systems and components - Custom built systems - Part 3:                MDRT
113                                Performance test methods for solar water heater stores
    302   EN 13053:2006+A1:2011    Ventilation for buildings - Air handling units - Rating and performance for units,   MDRT
114                                components and sections
    302   EN 13141-4:2011          Ventilation for buildings - Performance testing of components/products for           MDRT
                                   residential ventilation - Part 4: Fans used in residential ventilation systems
115
      302 prEN 13142               Ventilation for buildings - Components/products for residential ventilation -        MDRT
116                                Required and optional performance characteristics
117 318 FprEN 1935 rev             Building hardware - Single-axis hinges - Requirements and test methods               MDRT
    318 FprEN 13126-1              Building hardware - Hardware for windows and door height windows -                   MDRT
                                   Requirements and test methods - Part 1: Requirements common to all types of
118                                hardware
119 321 prEN 206-1 rev             Concrete - Part 1: Specification, performance, production and conformity             MDRT
    321 prEN 450-1                 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria    MDRT
120
121 321 prEN 450-2                 Fly ash for concrete - Part 2: Conformity evaluation                                 MDRT
      321 prEN 932-5               Tests for general properties of aggregates - Part 5: Common equipment and            MDRT
122                                calibration
      321 FprEN 933-1              Tests for geometrical properties of aggregates - Part 1: Determination of particle   MDRT
123                                size distribution - Sieving method
      321 FprEN 933-3              Tests for geometrical properties of aggregates - Part 3: Determination of particle   MDRT
124                                shape - Flakiness index
      321 FprEN 933-8              Tests for geometrical properties of aggregates - Part 8: Assessment of fines -       MDRT
125                                Sand equivalent test
126 321 FprEN 12620                Aggregates for concrete                                                              MDRT
127 321 FprEN 12839                Precast concrete products - Elements for fences                                      MDRT
      321 FprEN 13043              Aggregates for bituminous mixtures and surface treatments for roads, airfields       MDRT
128                                and other trafficked areas
129 321 FprEN 13139                Aggregates for mortar                                                                MDRT
130 321 FprEN 13224                Precast concrete products - Ribbed floor elements                                    MDRT
      321 FprEN 13242              Aggregates for unbound and hydraulically bound materials for use in civil            MDRT
131                                engineering work and road construction
132 321 prEN 13369                 Common rules for precast concrete products                                           MDRT
133 321 FprEN 13383-1              Armourstone - Part 1: Specification                                                  MDRT
      326 EN 1090-2:2008+A1:2011   Execution of steel structures and aluminium structures - Part 2: Technical           MDRT
134                                requirements for steel structures
      326 prEN 1912                Structural Timber - Strength classes - Assignment of visual grades and species       MDRT
135
136 326 prEN 14080                 Timber structures - Glued laminated timber and glued solid timber                    MDRT
    326 FprEN 14081-3              Timber structures - Strength graded structural timber with rectangular cross         MDRT
                                   section - Part 3: Machine grading; additional requirements for factory production
137                                control
      335 prEN ISO 6927            Buildings and civil engineering works - Sealants - Vocabulary (ISO/DIS               MDRT
138                                6927:2011)
139 346 FprEN 62305-2:2011         Protection against lightning -- Part 2: Risk management                              MDRT
    347 prEN 845-1                 Specification for ancillary components for masonry - Part 1: Wall ties, tension      MDRT
140                                straps, hangers and brackets
141 347 prEN 845-2                 Specification for ancillary components for masonry - Part 2: Lintels                 MDRT
      347 prEN 845-3               Specification for ancillary components for masonry - Part 3: Bed joint               MDRT
142                                reinforcement of steel meshwork
      347 FprEN 1457-1             Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operation under dry        MDRT
143                                conditions - Requirements and test methods
      347 FprEN 1457-2             Chimney - Clay ceramic flue liners - Part 2: Flue liners operating under wet         MDRT
144                                conditions - Requirements and test methods




                                             Pagina 158 din 346
      347 prEN 1745                Masonry and masonry products - Methods for determining thermal properties               MDRT
145
      347 prEN 13084-7             Free-standing chimneys - Product specifications of cylindrical steel fabrications       MDRT
146                                for use in single wall steel chimneys and steel liners
      347 prEN 14471 rev           Chimneys - System chimneys with plastic flue liners - Requirements and test             MDRT
147                                methods
148 361 prEN 1537                  Execution of special geotechnical work - Ground anchors                                 MDRT
      1 FprEN 60034-18-21:2011     Rotating electrical machines -- Part 18-21: Functional evaluation of insulation         MECMA
                                   systems - Test procedures for wire-wound windings - Thermal evaluation and
149                                classification
        1 FprEN 60034-18-31:2011   Rotating electrical machines -- Part 18-31: Functional evaluation of insulation         MECMA
                                   systems - Test procedures for form-wound windings - Thermal evaluation and
                                   classification of insulation systems used in rotating machines
150
        2 FprEN 82079-1:2011       Preparation of instructions for use - Structuring, content and presentation -- Part     MECMA
151                                1: General principles and detailed requirements
152     3 EN 60076-1:201X          Power transformers -- Part 1: General                                                   MECMA
153     3 FprEN 61378-1:2011       Convertor transformers -- Part 1: Transformers for industrial applications              MECMA
154     5 FprEN 60505:2011         Evaluation and qualification of electrical insulation systems                           MECMA
        5 FprEN 60626-1:2008       Combined flexible materials for electrical insulation -- Part 1: Definitions and        MECMA
155                                general requirements
        5 FprEN 60893-3-1:2010     Insulating materials - Industrial rigid laminated sheets based on thermosetting         MECMA
                                   resins for electrical purposes -- Part 3-1: Specifications for individual materials -
156                                Types of industrial rigid laminated sheets
        8 FprEN 61869-3:2011       Instrument transformers -- Part 3: Additional Requirements for Inductive Voltage        MECMA
157                                Transformers
        8 EN 62271-103:201X        High-voltage switchgear and controlgear -- Part 103: Switches for rated voltages        MECMA
158                                above 1 kV up to and including 52 kV
        8 FprEN 62271-106:2011     High-voltage switchgear and controlgear -- Part 106: Alternating current                MECMA
159                                contactors, contactor-based controllers and motor-starters
        9 EN 60947-4-2:201X        Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-               MECMA
160                                starters - AC semiconductor motor controllers and starters
        9 FprEN 61439-4:2011       Low-voltage switchgear and controlgear assemblies -- Part 4: Assemblies for             MECMA
161                                construction sites (ACS)
        9 FprEN 62208:2011         Empty enclosures for low-voltage switchgear and controlgear assemblies -                MECMA
162                                General requirements
       11 FprEN 60669-2-6:2011     Switches for household and similar fixed electrical installations -- Part 2-6:          MECMA
163                                Fireman's switches for exterior and interior signs and luminaires
       11 FprEN 62196-1:2011       Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive               MECMA
164                                charging of electric vehicles -- Part 1: General requirements
       15 FprEN 62217:2011         Polymeric HV insulators for indoor and outdoor use - General definitions, test          MECMA
165                                methods and acceptance criteria
166    19 FprEN 60068-1:2010       Environmental testing -- Part 1: General and guidance                                   MECMA
       19 FprEN 60068-2-65:2011    Environmental testing -- Part 2: Methods of test - Test Fg: Vibration, acoustically     MECMA
167                                induced
       19 FprEN 60721-2-1:2011     Classification of environmental conditions -- Part 2-1: Environmental conditions        MECMA
168                                appearing in nature - Temperature and humidity
       19 FprEN 60721-2-2:2011     Classification of environmental conditions -- Part 2-2: Environmental conditions        MECMA
169                                appearing in nature -- Precipitation and wind
       19 FprEN 60721-2-3:2011     Classification of environmental conditions -- Part 2-3: Environmental conditions        MECMA
170                                appearing in nature - Air pressure
171    21 FprEN 60851-6:2011       Winding wires - Test methods -- Part 6: Thermal properties                              MECMA
       23 FprEN 60534-8-2:2011     Industrial-process control valves -- Part 8-2: Noise considerations - Laboratory        MECMA
                                   measurement of noise generated by hydrodynamic flow through control valves
172
       23 FprEN 61326-1:2011       Electrical equipment for measurement, control and laboratory use - EMC                  MECMA
173                                requirements -- Part 1: General requirements
       23 FprEN 61326-2-1:2011     Electrical equipment for measurement, control and laboratory use - EMC                  MECMA
                                   requirements -- Part 2-1: Particular requirements - Test configurations,
                                   operational conditions and performance criteria for sensitive test and
174                                measurement equipment for EMC unprotected applications
       23 FprEN 61326-2-2:2011     Electrical equipment for measurement, control and laboratory use - EMC                  MECMA
                                   requirements -- Part 2-2: Particular requirements - Test configurations,
                                   operational conditions and performance criteria for portable test, measuring and
                                   monitoring equipment used in low-voltage distribution systems
175
       23 FprEN 61326-2-6:2011     Electrical equipment for measurement, control and laboratory use - EMC                  MECMA
                                   requirements -- Part 2-6: Particular requirements - In vitro diagnostic (IVD)
176                                medical equipment
       26 EN 60118-13:201X         Electroacoustics - Hearing aids -- Part 13: Electromagnetic compatibility (EMC)         MECMA
177



                                              Pagina 159 din 346
      27 FprEN 50132-5-1:2011   Alarm systems - CCTV surveillance systems for use in security applications --        MECMA
                                Part 5-1: Video transmission - General video transmission performance
178                             requirements
      27 FprEN 50132-5-2:2011   Alarm systems - CCTV surveillance systems for use in security applications --        MECMA
179                             Part 5-2: IP Video Transmission Protocols
      27 FprEN 50132-5-3:201X   Alarm systems - CCTV surveillance systems for use in security applications --        MECMA
                                Part 5-3: Video transmission - Analogue and digital video transmission
180
      27 prEN 50132-7:2011      Alarm system -- CCTV surveillance systems for use in security applications --        MECMA
181                             Part 7: Application guidelines
      27 FprEN 50136-1:2011     Alarm systems - Alarm transmission systems and equipment -- Part 1: General          MECMA
182                             requirements for alarm transmission systems
      30 EN 55013:201X          Sound and television broadcast receivers and associated equipment - Radio            MECMA
183                             disturbance characteristics - Limits and methods of measurement
      30 EN 61000-3-12:201X     Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic       MECMA
                                currents produced by equipment connected to public low-voltage systems with
184                             input current > 16 A and <= 75 A per phase
      31 FprEN 60676:2011       Industrial electroheating equipment - Test methods for direct arc furnaces           MECMA
185
      33 FprEN 60695-4:2011     Fire hazard testing -- Part 4: Terminology concerning fire tests for                 MECMA
186                             electrotechnical products
187   35 FprEN 61701:2010       Salt mist corrosion testing of photovoltaic (PV) modules                             MECMA
      36 FprEN 61204-3:2011     Low-voltage power supplies, d.c. output -- Part 3: Electromagnetic compatibility     MECMA
188                             (EMC)
      37 FprEN 60143-2:2011     Series capacitors for power systems -- Part 2: Protective equipments for series      MECMA
189                             capacitor banks
      38 prEN 60601-2-22:2007   Medical electrical equipment -- Part 2-22: Particular requirements for basic         MECMA
                                safety and essential performance of surgical, therapeutic and diagnostic laser
190                             equipment
191   39 EN 287-1:2011          Qualification test of welders - Fusion welding - Part 1: Steels                      MECMA
      39 prEN ISO 5817 rev      Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam     MECMA
192                             welding excluded) - Quality levels for imperfections
      39 FprEN ISO 9012         Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests      MECMA
193                             (ISO 9012:2008)
      39 prEN ISO 13585         Brazing - Qualification test of brazers and brazing operators (ISO/DIS               MECMA
194                             13585:2010)
      39 prEN ISO 14174         Welding consumables - Fluxes for submerged arc welding and electroslag               MECMA
195                             welding - Classification (ISO/DIS 14174:2010)
      39 FprEN ISO 15609-5      Specification and qualification of welding procedures for metallic materials -       MECMA
                                Welding procedure specification - Part 5: Resistance welding (ISO/FDIS 15609-
196                             1:2011)
      39 prEN ISO 17636-1       Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-      MECMA
197                             ray techniques with film (ISO/DIS 17636-1:2010)
      39 prEN ISO 17636-2       Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-      MECMA
198                             ray techniques with digital detectors (ISO/DIS 17636-2:2010)
      39 prEN ISO 17653         Resistance welding - Destructive tests on welds in metallic materials - Torsion      MECMA
199                             test of resistance spot welds (ISO/DIS 17653:2011)
      39 FprEN ISO 17654 rev    Resistance welding - Destructive tests of welds - Pressure test of resistance        MECMA
200                             seam welds (ISO/FDIS 17654:2011)
      39 prEN ISO 21952         Welding consumables - Wire electrodes, wires, rods and deposits for gas-             MECMA
                                shielded arc welding of creep-resisting steels - Classification (ISO/DIS
201                             21952:2010)
      40 prEN ISO 9712          Non-destructive testing - Qualification and certification of NDT personnel -         MECMA
202                             General principles (ISO/DIS 9712:2011)
      40 FprEN ISO 11699-1      Non-destructive testing - Industrial radiographic film - Part 1: Classification of   MECMA
                                film systems for industrial radiography (ISO 11699-1:2008)
203
      40 FprEN ISO 11699-2      Non-destructive testing - Industrial radiographic films - Part 2: Control of film    MECMA
204                             processing by means of reference values (ISO 11699-2:1998)
205   47 FprEN 1370             Founding - Examination of surface condition                                          MECMA
      47 FprEN 1371-1           Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low           MECMA
206                             pressure die castings
      47 FprEN 1559-3           Founding - Technical conditions of delivery - Part 3: Additional requirements for    MECMA
207                             iron castings
208   47 FprEN 1561             Founding - Grey cast irons                                                           MECMA
209   47 FprEN 1562             Founding - Malleable cast irons                                                      MECMA
210   47 FprEN 1563             Founding - Spheroidal graphite cast irons                                            MECMA
211   47 FprEN 1564             Founding - Ausferritic spheroidal graphite cast iron                                 MECMA
212   47 FprEN 13835            Founding - Austenitic cast irons                                                     MECMA




                                           Pagina 160 din 346
       55 prEN ISO 10209       Technical product documentation - Vocabulary - Terms relating to technical          MECMA
                               drawings, product definition and related products (ISO/DIS 10209:2010)
213
       56 FprEN ISO 15378      Primary packaging materials for medicinal products - Particular requirements for    MECMA
                               the application of ISO 9001:2008, with reference to Good Manufacturing
214                            Practice (GMP) (ISO/FDIS 15378:2011)
215    56 prEN ISO 19011       Guidelines for auditing management systems (ISO/DIS 19011:2010)                     MECMA
       58 prEN ISO 1101 rev    Geometrical Product Specifications (GPS) -- Geometrical tolerancing --            MECMA
216                            Tolerances of form, orientation, location and run-out
       59 prEN ISO 898-2       Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: MECMA
                               Nuts with specified proof load values - Coarse thread (ISO/DIS 898-2:2010)
217
       59 prEN ISO 898-5       Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: MECMA
                               Set screws and similar threaded fasteners with specified hardness classes -
                               Coarse thread and fine pitch thread (ISO/DIS 898-5:2010)
218
219    59 FprEN ISO 1207       Slotted cheese head screws - Product grade A (ISO/FDIS 1207:2011)                   MECMA
220    59 FprEN 1337-1         Structural bearings - Part 1: General                                               MECMA
221    59 FprEN ISO 1580       Slotted pan head screws - Product grade A (ISO/FDIS 1580:2011)                      MECMA
       59 FprEN ISO 2009       Slotted countersunk flat head screws - Product grade A (ISO/FDIS 2009:2011)         MECMA
222
       59 FprEN ISO 2010       Slotted raised countersunk head screws - Product grade A (ISO/FDIS                  MECMA
223                            2010:2011)
       59 FprEN ISO 7045 rev   Pan head screws with type H or type Z cross recess - Product grade A                MECMA
224                            (ISO/FDIS 7045:2011)
       59 FprEN ISO 7046-1     Countersunk flat head screws (common head style) with type H or type Z cross        MECMA
                               recess - Product grade A - Part 1: Steel of property class 4.8 (ISO/FDIS 7046-
225                            1:2011)
       59 FprEN ISO 7046-2     Countersunk flat head screws (common head style) with type H or type Z cross        MECMA
                               recess - Product grade A - Part 2: Steel of property class 8.8, stainless steel and
226                            non-ferrous metals (ISO/FDIS 7046-2:2011)
       59 FprEN ISO 7047       Raised countersunk head screws (common head style) with type H or type Z            MECMA
227                            cross recess - Product grade A (ISO/FDIS 7047:2011)
228    59 FprEN ISO 7049       Cross-recessed pan head tapping screws (ISO/FDIS 7049:2011)                         MECMA
       66 prEN 12275 rev       Mountaineering equipment - Connectors - Safety requirements and test methods MECMA
229
230    66 prEN 13537 rev       Requirements for sleeping bags                                                      MECMA
231    77 prEN 690             Agricultural machinery - Manure spreaders - Safety                                  MECMA
       77 prEN ISO 5395-2      Garden equipment - Safety of powered lawnmowers - Part 2: Pedestrian                MECMA
232                            controlled lawnmowers (ISO/DIS 5395-2:2010)
       77 prEN ISO 11680-1     Machinery for forestry - Safety requirements and testing for pole-mounted           MECMA
                               powered pruners - Part 1: Machines fitted with an integral combustion engine
233                            (ISO/DIS 11680-1:2009)
       77 prEN ISO 11680-2     Machinery for forestry - Safety requirements and testing for pole-mounted           MECMA
                               powered pruners - Part 2: Machines for use with back-pack power source
234                            (ISO/DIS 11680-2:2009)
       77 prEN ISO 22867       Forestry and garden machinery - Vibration test code for portable hand-held          MECMA
                               machines with internal combustion engine - Vibration at the handles (ISO/DIS
235                            22867:2009)
236    79 EN 693:2001+A2       Machine tools - Safety - Hydraulic presses                                          MECMA
       79 prEN ISO 28881       Machine tools - Safety - Electro discharge machines (ISO/DIS 28881:2010)            MECMA
237
       84 EN 1889-1:2011       Machines for underground mines - Mobile machines working underground -              MECMA
238                            Safety - Part 1: Rubber tyred vehicles
       85 prEN 280 rev         Mobile elevating work platforms - Design calculations - Stability criteria -        MECMA
239                            Construction - Safety - Examinations and tests
       85 FprEN 1570-1         Safety requirements for lifting tables - Part 1: Lifting tables serving up to two   MECMA
240                            fixed landings
241    85 FprEN 14985          Cranes - Slewing jib cranes                                                         MECMA
       89 prEN ISO 4126-1      Safety devices for protection against excessive pressure - Part 1: Safety valves    MECMA
242                            (ISO/DIS 4126-1:2009)
       89 prEN ISO 4126-4      Safety devices for protection against excessive pressure - Part 4: Pilot-operated   MECMA
243                            safety valves (ISO/DIS 4126-4:2009)
       89 prEN ISO 4126-5      Safety devices for protection against excessive pressure - Part 5: Controlled       MECMA
                               safety pressure relief systems (CSPRS) (ISO/DIS 4126-5:2009)
244
       89 FprEN 12266-1        Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test       MECMA
245                            procedures and acceptance criteria - Mandatory requirements
      102 prEN ISO 2419        Leather - Physical and mechanical tests - Sample preparation and conditioning       MECMA
246                            (ISO/DIS 2419:2010)




                                          Pagina 161 din 346
      102 prEN ISO 3376          Leather - Physical and mechanical tests - Determination of tensile strength and      MECMA
247                              percentage extension (ISO/DIS 3376:2009)
      102 prEN ISO 3377-1        Leather - Physical and mechanical tests - Determination of tear load - Part 1:       MECMA
248                              Single edge tear (ISO/DIS 3377-1:2010)
      102 prEN ISO 5402-1        Leather - Determination of flex resistance - Part 1: Flexometer method (ISO/DIS      MECMA
249                              5402-1:2009)
      102 prEN ISO 5403-1        Leather - Determination of water resistance of flexible leather - Part 1: Repeated   MECMA
250                              linear compression (penetrometer) (ISO/DIS 5403-1:2010)
      102 prEN ISO 5404          Leather - Physical test methods - Determination of water resistance of heavy         MECMA
251                              leathers (ISO/DIS 5404:2010)
      102 prEN ISO 11640         Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro        MECMA
252                              rubbing (ISO/DIS 11640:2010)
      102 prEN ISO 11641         Leather - Tests for colour fastness - Colour fastness to perspiration (ISO/DIS       MECMA
253                              11641:2010)
254 102   prEN ISO 14931 rev     Leather - Guide to the selection of leather for apparel (excluding furs)             MECMA
    102   FprEN ISO 17071        Leather - Physical and mechanical tests - Determination of fogging                   MECMA
255                              characteristics (ISO 17071:2006)
    102   FprEN ISO 17074        Leather - Physical and mechanical tests - Determination of resistance to             MECMA
256                              horizontal spread of flame (ISO 17074:2006)
    102   prEN ISO 17076-1       Leather - Determination of abrasion resistance - Part 1: Taber method (ISO/DIS       MECMA
257                              17076-1:2010)
    102   prEN ISO 17186         Leather - Physical and mechanical tests - Determination of surface coating           MECMA
258                              thickness (ISO/DIS 17186:2009)
    102   FprEN ISO 17230        Leather - Physical and mechanical tests - Determination of water penetration         MECMA
259                              pressure (ISO 17230:2006)
    102   FprEN ISO 17231        Leather - Physical and mechanical tests - Determination of water repellency of       MECMA
260                              garment leather (ISO 17231:2006)
    102   prEN ISO 17235         Leather - Physical and mechanical tests - Determination of softness (ISO/DIS         MECMA
261                              17235:2009)
    102   prEN ISO 26082-1       Leather - Physical and mechanical test method for the determination of soiling -     MECMA
262                              Part 1: Rubbing (Martindale) method (ISO/DIS 26082-1:2010)
    103   prEN ISO 105-E02       Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water        MECMA
263                              (ISO/DIS 105-E02:2009)
    103   prEN ISO 105-E04 rev   Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration     MECMA
264
    103   prEN ISO 4920          Textiles - Determination of resistance to surface wetting (spray test) (ISO/DIS      MECMA
265                              4920:2010)
    103   prEN ISO 6330          Textiles - Domestic washing and drying procedures for textile testing (ISO/DIS       MECMA
266                              6330:2010)
267 103   prEN ISO 9092          Textiles - Nonwoven - Definition (ISO/DIS 9092:2010)                                 MECMA
268 103   prEN ISO 10306 rev     Textiles - Cotton fibres - Evaluation of maturity by the air flow method             MECMA
    103   FprEN ISO 14184-1      Textiles - Determination of formaldehyde - Part 1: Free and hydrolised               MECMA
269                              formaldehyde (water extraction method) (ISO/FDIS 14184-1:2011)
    103   FprEN ISO 14184-2      Textiles - Determination of formaldehyde - Part 2: Released formaldehyde             MECMA
270                              (vapour absorption method) (ISO/FDIS 14184-2:2011)
    103   prEN 14362-1           Textiles - Methods for determination of certain aromatic amines derived from         MECMA
                                 azo colorants - Part 1: Detection of the use of certain azo colorants accessible
271                              with and without extracting the fibres
      106 prEN ISO 14644-1       Cleanrooms and associated controlled environments - Part 1: Classification of        MECMA
                                 air cleanliness by particle concentration (ISO/DIS 14644-1:2010)
272
      106 prEN ISO 14644-2       Cleanrooms and associated controlled environments - Part 2: Specifications for MECMA
                                 monitoring and periodic testing to prove continued compliance with ISO 14644-1
273                              (ISO/DIS 14644-2:2010)
      108 prEN ISO 527-1         Plastics - Determination of tensile properties - Part 1: General principles          MECMA
274                              (ISO/DIS 527-1:2010)
      108 prEN ISO 527-2         Plastics - Determination of tensile properties - Part 2: Test conditions for         MECMA
275                              moulding and extrusion plastics (ISO/DIS 527-2:2010)
276 108   prEN ISO 845 rev       Cellular plastics and rubbers - Determination of apparent density                    MECMA
    108   prEN ISO 1043-1        Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their          MECMA
277                              special characteristics (ISO/DIS 1043-1:2008)
    108   prEN ISO 1043-2        Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing           MECMA
278                              materials (ISO/DIS 1043-2:2008)
    108   prEN ISO 1183-1        Plastics - Methods for determining the density of non-cellular plastics - Part 1:    MECMA
                                 Immersion method, liquid pyknometer method and titration method (ISO/DIS
279                              1183-1:2011)
      108 prEN ISO 11833-1       Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and     MECMA
                                 characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO/DIS 11833-
280                              1:2010)




                                           Pagina 162 din 346
      108 prEN ISO 14855-1 rev     Determination of the ultimate aerobic biodegradability of plastic materials under MECMA
                                   controlled composting conditions - Method by analysis of evolved carbon dioxide
281                                - Part 1: General method
      108 prEN ISO 15791-1 rev     Plastics - Development and use of intermediate-scale fire tests for plastics         MECMA
282                                products - Part 1: General guidance
      109 prEN 834                 Heat cost allocators for the determination of the consumption of room heating        MECMA
283                                radiators - Appliances with electrical energy supply
284 109 prEN 12480                 Gas meters - Rotary displacement meters                                              MECMA
    118 FprEN 152                  Wood preservatives - Determination of the protective effectiveness of a          MECMA
                                   preservative treatment against blue stain in wood in service - Laboratory method
285
286 118   prEN 325                 Wood-based panels - Determination of dimensions of test pieces                       MECMA
    118   prEN 1156 rev            Wood-based panels - Determination of duration of load and creep factors              MECMA
287
    118   prEN 1316-1              Hardwood round timber - Qualitative classification - Part 1: Oak and beech           MECMA
288
289 118   prEN 1316-2              Hardwood round timber - Qualitative classification - Part 2: Poplar                  MECMA
      118 FprEN 1870-4             Safety of woodworking machines - Circular sawing machines - Part 4: Multi-           MECMA
290                                blade rip sawing machines with manual loading and/or unloading
      118 prEN 13759               Furniture - Operating mechanisms for seating and sofa-beds - Test methods            MECMA
291
292 118 FprEN 14272                Plywood - Calculation method for some mechanical properties                          MECMA
    118 FprEN 14915 rev            Solid wood paneling and cladding - Characteristics, evaluation of conformity and MECMA
293                                marking
294 125 EN 71-2:2011               Safety of toys - Part 2: Flammability                                            MECMA
295 125 FprEN 71-8                 Safety of toys - Part 8: Activity toys for domestic use                              MECMA
    128 EN 61812-1:201X            Time relays for industrial and residential use -- Part 1: Requirements and tests     MECMA
296
297 129 EN 60974-12:201X           Arc welding equipment -- Part 12: Coupling devices for welding cables                MECMA
298 129 FprEN 60974-1:2010         Arc welding equipment -- Part 1: Welding power sources                               MECMA
299 129 FprEN 60974-7:2011         Arc welding equipment -- Part 7:Torches                                              MECMA
      130 FprEN 60730-1:2011       Automatic electrical controls for household and similar use -- Part 1: General     MECMA
300                                requirements
      131 FprEN 60598-2-24:2011    Luminaires -- Part 2-24: Particular requirements - Luminaires with limited surface MECMA
301                                temperatures
302 131 EN 60662:201X              High-pressure sodium vapour lamps - Performance specifications                     MECMA
303 131 FprEN 61199:2011           Single-capped fluorescent lamps - Safety specifications                              MECMA
      131 FprEN 61347-2-9:2011     Lamp electromagnetic controlgear -- Part 2-9: Particular requirements for            MECMA
                                   electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
304
305 133 FprEN 61362:2010           Guide to specification of hydraulic turbine governing systems                        MECMA
    140 FprEN 62488-1:2011         Power line communication systems for power utility applications -- Part 1:           MECMA
                                   Planning of analogue and digital power line carrier systems operating over
306                                EHV/HV/MV electricity grids
      144 FprEN 61709:2011         Electronic components - Reliability - Reference conditions for failure rates and     MECMA
307                                stress models for conversion
      145 FprEN 60512-1-100:2011   Connectors for electronic equipment - Tests and measurements -- Part 1-100:          MECMA
308                                General - Applicable publications
      145 FprEN 61076-2:2011       Connectors for electronic equipment - Product requirements -- Part 2: Sectional      MECMA
309                                specification for circular connectors
      145 FprEN 61076-2-001:2011   Connectors for electronic equipment - Product requirements -- Part 2-001:            MECMA
310                                Circular connectors - Blank detail specification
      145 FprEN 61076-2-101:2011   Connectors for electronic equipment - Product requirements -- Part 2-101:            MECMA
                                   Circular connectors - Detail specification for M12 connectors with screw-locking
311
      145 FprEN 61169-1:2011       Radio-frequency connectors -- Part 1: Generic specification - General                MECMA
312                                requirements and measuring methods
      145 FprEN 61587-2:2011       Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC         MECMA
313                                60297 -- Part 2: Seismic tests for cabinets and racks
      147 FprEN 14511-1            Air conditioners, liquid chilling packages and heat pumps with electrically driven   MECMA
                                   compressors for space heating and cooling - Part 1: Terms and definitions
314
      147 FprEN 14511-2            Air conditioners, liquid chilling packages and heat pumps with electrically driven   MECMA
                                   compressors for space heating and cooling - Part 2: Test conditions
315
      147 FprEN 14511-3            Air conditioners, liquid chilling packages and heat pumps with electrically driven   MECMA
                                   compressors for space heating and cooling - Part 3: Test methods
316




                                             Pagina 163 din 346
      147 FprEN 14511-4            Air conditioners, liquid chilling packages and heat pumps with electrically driven    MECMA
                                   compressors for space heating and cooling - Part 4: Requirements
317
318 152 FprEN 764-2                Pressure equipment - Part 2: Quantities, symbols and units                            MECMA
    154 EN 1010-5:2005+A1:2011     Safety of machinery - Safety requirements for the design and construction of          MECMA
                                   printing and paper converting machines - Part 5: Machines for the production of
                                   corrugated board and machines for the conversion of flat and corrugated board
319
      154 FprEN 1034-3             Safety of machinery - Safety requirements for the design and construction of          MECMA
                                   paper making and finishing machines - Part 3: Rereelers and winders
320
      154 FprEN 1458-1             Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal            MECMA
321                                heat input not exceeding 6 kW - Part 1: Safety
      154 FprEN 1458-2             Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal            MECMA
322                                heat input not exceeding 6 kW - Part 2: Rational use of energy
      157 FprEN ISO 6158           Metallic and other inorganic coatings - Electrodeposited coatings of chromium         MECMA
323                                for engineering purposes (ISO/FDIS 6158:2011)
      157 prEN ISO 7441 rev        Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor     MECMA
324                                exposure corrosion tests
      157 prEN ISO 7539-1 rev      Corrosion of metals and alloys - Stress corrosion testing - Part 1: General           MECMA
325                                guidance on testing procedures
      159 prEN 50565-1:2011        Electric cables - Guide to use for cables with a rated voltage not exceeding          MECMA
326                                450/750 V -- Part 1: General guidance
      160 prEN 50441-1:2010        Cables for indoor residential telecommunication installations -- Part 1:              MECMA
327                                Unscreened cables - Grade 1
      160 prEN 50441-2:2010        Cables for indoor residential telecommunication installations -- Part 2: Screened     MECMA
328                                cables - Grade 2
      161 FprEN 61056-1:2011       General purpose lead-acid batteries (valve-regulated types) -- Part 1: General        MECMA
329                                requirements, functional characteristics - Methods of test
      161 FprEN 61056-2:2011       General purpose lead-acid batteries (valve-regulated types) -- Part 2:                MECMA
330                                Dimensions, terminals and marking
      161 FprEN 61982-1:2011       Secondary batteries (except lithium) for the propulsion of electric road vehicles -   MECMA
331                                Performance and endurance tests
      161 FprEN 62282-3-200:2011   Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems -            MECMA
332                                Performance test methods
      164 FprEN 62056-31:2010      Electricity metering - Data exchange for meter reading, tariff and load control --    MECMA
                                   Part 31: Use of local area networks on twisted pair with carrier signalling
333
      166 FprEN 60688:2011         Electrical measuring transducers for converting a.c. electrical quantities to      MECMA
334                                analogue or digital signals
      169 prEN ISO 10418 rev       Petroleum and natural gas industries - Offshore production installations -         MECMA
                                   Analysis, design, installation and testing of basic surface process safety systems
335
      169 prEN 13012 rev           Petrol filling stations - Construction and performance of automatic nozzles for       MECMA
336                                use on fuel dispensers
337 169 prEN 13160-1 rev           Leak detection systems - Part 1: General Principles                                   MECMA
338 169 prEN 13352                 Specification for the performance of automatic tank contents gauges                   MECMA
      169 prEN 13575               Static thermoplastic tanks for the above ground storage of chemicals - Blow           MECMA
                                   moulded or rotationally moulded polyethylene tanks - Requirements and test
339                                methods
      169 prEN 13617-1 rev         Petrol filling stations - Part 1: Safety requirements for construction and            MECMA
340                                performance of metering pumps, dispensers and remote pumping units
      169 prEN 13617-2 rev         Petrol filling stations - Part 2: Safety requirements for construction and            MECMA
341                                performance of safe breaks for use on metering pumps and dispensers
      169 prEN 13617-3 rev         Petrol filling stations - Part 3: Safety requirements for construction and            MECMA
342                                performance of shear valves
      169 prEN 13617-4 rev         Petrol filling stations - Part 4: Safety requirements for construction and            MECMA
343                                performance of swivels for use on metering pumps and dispensers
      169 prEN ISO 13628-1 rev     Petroleum and natural gas industries - Design and operation of subsea                 MECMA
344                                production systems - Part 1: General requirements and recommendation
      169 prEN ISO 13706           Petroleum, petrochemical and natural gas industries - Air-cooled heat                 MECMA
345                                exchangers (ISO/DIS 13706:2010)
346 171 prEN 1976                  Copper and copper alloys - Cast unwrought copper products                             MECMA
347 171 prEN 12449                 Copper and copper alloys - Seamless, round tubes for general purposes                 MECMA
348 171 prEN 12451 rev             Copper and copper alloys - Seamless, round tubes for heat exchangers                  MECMA
    171 FprEN 12452                Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers         MECMA
349
350 174 FprEN 61400-11:2010        Wind turbines -- Part 11: Acoustic noise measurement techniques                       MECMA
351 184 FprEN 10218-1              Steel wire and wire products - General - Part 1: Test methods                         MECMA
    184 FprEN 10218-2              Steel wire and wire products - General - Part 2: Wire dimensions and tolerances       MECMA
352



                                             Pagina 164 din 346
      184 FprEN 10257-1       Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables   MECMA
353                           or telecommunication cables - Part 1: Land cables
      184 FprEN 10257-2       Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables   MECMA
354                           or telecommunication cables - Part 2: Submarine cables
      184 FprEN 10264-1       Steel wire and wire products - Steel wire for ropes - Part 1: General requirements MECMA
355
      184 FprEN 10264-2       Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy MECMA
356                           steel wire for ropes for general applications
      184 FprEN 10264-3       Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped     MECMA
357                           non alloyed steel wire for high duty applications
      184 FprEN 10264-4       Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire MECMA
358
      184 FprEN ISO 16120-3   Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for   MECMA
                              rimmed and rimmed substitute, low-carbon steel wire rod (ISO/FDIS 16120-
359                           3:2011)
      184 FprEN ISO 16120-4   Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for   MECMA
                              wire rod for special applications (ISO/FDIS 16120-4:2011)
360
      189 prEN ISO 6808 rev   Plastics hoses and hose assemblies for suction and low-pressure discharge of      MECMA
361                           petroleum liquids - Specification
      189 prEN ISO 10619-1    Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - MECMA
                              Part 1: Bending tests at ambient temperature (ISO/DIS 10619-1:2010)
362
363 190   prEN 14602          Footwear - Test method for the assessment of ecological criteria                      MECMA
    190   FprEN ISO 20877     Footwear - Test methods for whole shoe - Thermal insulation (ISO/FDIS                 MECMA
364                           20877:2011)
    201   FprEN 13951         Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to        MECMA
365                           ensure hygiene in use
366 203   prEN ISO 2409       Paints and varnishes - Cross-cut test (ISO/DIS 2409:2010)                             MECMA
      203 prEN ISO 2431       Paints and varnishes - Determination of flow time by use of flow cups (ISO/DIS    MECMA
367                           2431:2010)
      203 FprEN ISO 4628-6    Paints and varnishes - Evaluation of degradation of coatings - Designation of     MECMA
                              quantity and size of defects, and of intensity of uniform changes in appearance -
                              Part 6: Assessment of degree of chalking by tape method (ISO/FDIS 4628-
368                           6:2011)
      203 prEN ISO 9117-6     Paints and varnishes - Drying tests - Part 6: Print-free test (ISO/DIS 9117-        MECMA
369                           6:2010)
      203 prEN ISO 11127-1    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
370                           (ISO/DIS 11127-1:2009)
      203 prEN ISO 11127-2    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination
371                           of particle size distribution (ISO/DIS 11127-2:2009)
      203 prEN ISO 11127-3    Preparation of steel substrates before application of paints and related products - MECMA
                              Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination
372                           of apparent density (ISO/DIS 11127-3:2009)
      203 prEN ISO 11127-4    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of
373                           hardness by a glass slide test (ISO/DIS 11127-4)
      203 prEN ISO 11127-5    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination
374                           of moisture (ISO/DIS 11127-5:2009)
      203 prEN ISO 11127-6    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination
                              of water-soluble contaminants by conductivity measurement (ISO/DIS 11127-
375                           6:2009)
      203 prEN ISO 11127-7    Preparation of steel substrates before application of paints and related products - MECMA
                               Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination
376                           of water-soluble chlorides (ISO/DIS 11127-7:2009)
377 218 FprEN ISO 2867        Earth-moving machinery - Access systems (ISO/FDIS 2867:2011)                          MECMA
    218 prEN ISO 3450         Earth-moving machinery - Wheeled or high-speed rubber-tracked machines -              MECMA
                              Performance requirements and test procedures for brake systems (ISO/DIS
378                           3450:2009)
      218 prEN 12001          Conveying, spraying and placing machines for concrete and mortar - Safety             MECMA
379                           requirements
380 218 prEN 12110            Tunnelling machines - Air locks - Safety requirements                                 MECMA
    218 prEN 12111            Tunnelling machines - Road headers, continuous miners and impact rippers -            MECMA
381                           Safety requirements
382 218 prEN 16191            Tunnelling machinery - Safety requirements                                            MECMA
383 218 prEN 16228-1 rev      Drilling and foundation equipment - Safety - Part 1: Common requirements              MECMA




                                        Pagina 165 din 346
      218 prEN 16228-2 rev        Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and   MECMA
384                               geotechnical engineering, quarrying and mining
      218 prEN 16228-3 rev        Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling   MECMA
385                               equipment (HDD)
386 218   prEN 16228-4 rev        Drilling and foundation equipment - Safety - Part 4: Foundation equipment              MECMA
    218   prEN 16228-5 rev        Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment MECMA
387
    218   prEN 16228-6 rev        Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and             MECMA
388                               injection equipment
    218   prEN 16228-7            Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary         MECMA
389                               equipment
    221   prEN ISO 1974           Paper - Determination of tearing resistance (Elmendorf method) (ISO/DIS                MECMA
390                               1974:2011)
    221   prEN ISO 3035           Corrugated fibreboard - Determination of flat crush resistance (ISO/DIS                MECMA
391                               3035:2010)
    221   prEN ISO 5270           Pulps - Laboratory sheets - Determination of physical properties (ISO/DIS              MECMA
392                               5270:2011)
    221   FprEN ISO 15320         Pulp, paper and board - Determination of pentachlorophenol in an aqueous               MECMA
393                               extract (ISO/FDIS 15320:2011)
    225   prEN 303-5              Central-Heating boilers - Part 5: Heating boilers for solid fuels, hand and            MECMA
                                  automatically stoked, nominal heat output of up to 500 kW - Terminology
394                               requirements, testing and marking
      225 EN 1196:2011            Domestic and non-domestic gas-fired air heaters - Supplementary requirements           MECMA
395                               for condensing air heaters
      225 EN 12952-2:2011         Water-tube boilers and auxiliary installations - Part 2: Materials for pressure        MECMA
396                               parts of boilers and accessories
      225 EN 12952-6:2011         Water-tube boilers and auxiliary installations - Part 6: Inspection during             MECMA
397                               construction; documentation and marking of pressure parts of the boiler
      225 FprEN 12952-3           Water-tube boilers and auxiliary installations - Part 3: Design and calculation for    MECMA
398                               pressure parts of the boiler
      225 FprEN 12952-5           Water-tube boilers and auxiliary installations - Part 5: Workmanship and               MECMA
399                               construction of pressure parts of the boiler
      225 prEN 12952-7 rev        Water-tube boilers and auxiliary installations - Part 7: Requirements for              MECMA
400                               equipment for the boiler
401 225 prEN 12953-1              Shell boilers - Part 1: General                                                        MECMA
    225 prEN 12953-2              Shell boilers - Part 2: Materials for pressure parts of boilers and accessories        MECMA
402
403 225 prEN 13278                Open fronted gas-fired independent space heaters                                       MECMA
      230 prEN ISO 11252          Lasers and laser-related equipment - Laser device - Minimum requirements for           MECMA
404                               documentation (ISO/DIS 11252:2010)
      230 FprEN ISO 11990-1       Lasers and laser-related equipment - Determination of laser resistance of              MECMA
405                               tracheal tubes - Part 1: Tracheal tube shaft (ISO/FDIS 11990-1:2011)
      231 EN 1089-3:2011          Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part       MECMA
406                               3: Colour coding
407 231 prEN ISO 10286 rev        Gas cylinders - Terminology                                                            MECMA
    231 prEN ISO 11114-1          Transportable gas cylinders - Compatibility of cylinder and valve materials with       MECMA
                                  gas contents - Part 1: Metallic materials (ISO/DIS 11114-1:2009)
408
      231 prEN ISO 11623 rev      Transportable gas cylinders - Periodic inspection and testing of composite gas         MECMA
409                               cylinders
410 231 prEN 12252                LPG equipment and accessories - Equipping of LPG road tankers                          MECMA
    237 EN 12666-1:2005+A1        Plastics piping systems for non-pressure underground drainage and sewerage -           MECMA
                                  Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
411
      237 FprEN ISO 13229         Thermoplastics piping systems for non-pressure applications - Unplasticized            MECMA
                                  poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity
412                               number and K-value (ISO 13229:2010)
      237 prEN ISO 15494 rev      Plastics piping systems for industrial applications - Polybutene (PB),                 MECMA
                                  polyethylene (PE) and polypropylene (PP) - Specifications for components and
413                               the system - Metric series
      238 FprEN 60704-2-10:2011   Household and similar electrical appliances - Test code for the determination of       MECMA
                                  airborne acoustical noise -- Part 2-10: Particular requirements for electric
                                  cooking ranges, ovens, grills, microwave ovens and any combination of these
414
      238 FprEN 60704-2-4:2010    Household and similar electrical appliances - Test code for the determination of       MECMA
                                  airborne acoustical noise -- Part 2-4: Particular requirements for washing
415                               machines and spin extractors
      238 FprEN 60704-2-6:2011    Household and similar electrical appliances - Test code for the determination of       MECMA
                                  airborne acoustical noise -- Part 2-6: Particular requirements for tumble dryer
416
417 238 FprEN 60705:2010          Household microwave ovens - Methods for measuring performance                          MECMA



                                            Pagina 166 din 346
      238 FprEN 61121:2011        Tumble dryers for household use - Methods for measuring the performance             MECMA
418
      239 EN 60335-2-25:201X      Household and similar electrical appliances - Safety -- Part 2-25: Particular       MECMA
                                  requirements for microwave ovens, including combination microwave ovens
419
      239 EN 60335-2-53:201X      Household and similar electrical appliances - Safety -- Part 2-53: Particular       MECMA
420                               requirements for sauna heating appliances and infrared cabins
      239 FprEN 60335-1:2010      Household and similar electrical appliances - Safety -- Part 1: General             MECMA
421                               requirements
      239 FprEN 60335-2-34:2011   Household and similar electrical appliances - Safety -- Part 2-34: Particular       MECMA
422                               requirements for motor-compressors
      239 FprEN 60335-2-6:2010    Household and similar electrical appliances - Safety -- Part 2-6: Particular        MECMA
                                  requirements for stationary cooking ranges, hobs, ovens and similar appliances
423
      239 FprEN 60335-2-9:2009    Household and similar electrical appliances - Safety -- Part 2-9: Particular        MECMA
                                  requirements for grills, toasters and similar portable cooking appliances
424
      239 FprEN 60335-2-95:2010   Household and similar electrical appliances - Safety -- Part 2-95: Particular       MECMA
                                  requirements for drives for vertically moving garage doors for residential use
425
      270 EN 13922:2011           Tanks for transport of dangerous goods - Service equipment for tanks - Overfill     MECMA
426                               prevention systems for liquid fuels
427 270 prEN 14564 rev            Tanks for transport of dangerous goods - Terminology                                MECMA
    305 FprEN 30-1-2              Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having      MECMA
428                               forced-convection ovens
    305 prEN 30-1-4 rev           Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having      MECMA
                                  one or more burners with an automatic burner control system
429
430 305   FprEN 126               Multifunctional controls for gas burning appliances                                 MECMA
    305   prEN 298                Automatic burner control systems for burners and appliances burning gaseous         MECMA
431                               or liquid fuels
    305   FprEN 498               Specification for dedicated liquefied petroleum gas appliances - Barbecues for      MECMA
432                               outdoor use contact grills included
433 305   prEN 12815              Residential cookers fired by solid fuel - Requirements and test methods             MECMA
      305 prEN 16129              Pressure regulators, automatic change-over devices, having a maximum                MECMA
                                  regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated
                                  safety devices and adaptors for butane, propane, and their mixtures
434
435 320 prEN 58                   Bitumen and bituminous binders - Sampling bituminous binders                        MECMA
    320 FprEN 1428                Bitumen and bituminous binders - Determination of water content in bituminous       MECMA
436                               emulsions - Azeotropic distillation method
437 320 prEN ISO 3171 rev         Petroleum liquids - Automatic pipeline sampling                                     MECMA
      320 FprEN 15492             Ethanol as a blending component for petrol - Determination of inorganic chloride    MECMA
438                               and sulfate content - Ion chromatographic method
      320 FprEN ISO 20846         Petroleum products - Determination of sulfur content of automotive fuels -          MECMA
439                               Ultraviolet fluorescence method (ISO/FDIS 20846:2011)
      324 FprEN 994               Textile floor coverings - Determination of the side length, squareness and          MECMA
440                               straightness of tiles
      324 FprEN ISO 23997         Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007)    MECMA
441
      324 FprEN ISO 23999         Resilient floor coverings - Determination of dimensional stability and curling after MECMA
442                               exposure to heat (ISO 23999:2008)
      324 FprEN ISO 24340         Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006) MECMA
443
      324 FprEN ISO 24343-1       Resilient and laminate floor coverings - Determination of indentation and           MECMA
444                               residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
      324 FprEN ISO 24344         Resilient floor coverings - Determination of flexibility and deflection (ISO        MECMA
445                               24344:2008)
      324 FprEN ISO 24345         Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)       MECMA
446
      324 FprEN ISO 24346         Resilient floor coverings - Determination of overall thickness (ISO 24346:2006)     MECMA
447
      324 FprEN ISO 26987         Resilient floor coverings - Determination of staining and resistance to chemicals   MECMA
448                               (ISO 26987:2008)
      333 EN 61851-1:201X         Electric vehicle conductive charging system -- Part 1: General requirements         MECMA
449
      336 FprEN 1143-1 rev        Secure storage units - Requirements, classification and methods of test for         MECMA
                                  resistance to burglary - part 1: Safes, ATM safes, strong room doors and strong
450                               rooms
      338 FprEN ISO 9311-2        Adhesives for thermoplastic piping systems - Part 2: Determination of shear         MECMA
451                               strength (ISO/FDIS 9311-2:2009)



                                            Pagina 167 din 346
      357 prEN ISO 6141         Gas analysis - Requirements for certificates for calibration gases and gas        MECMA
452                             mixtures
      357 prEN ISO 6145-1       Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric   MECMA
453                             methods - Part 1: Methods of calibration
      357 prEN ISO 6974-1       Natural gas - Determination of composition and associated uncertainty by gas      MECMA
                                chromatography - Part 1: General guidelines and calculation of composition
454                             (ISO/DIS 6974-1:2010)
      357 prEN ISO 6974-2       Natural gas - Determination of composition and associated uncertainty by gas      MECMA
                                chromatography - Part 2: Uncertainty calculations (ISO/DIS 6974-2:2010)
455
      357 prEN ISO 6974-5 rev   Natural gas - Determination of composition with defined uncertainty by gas     MECMA
                                chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to
                                C5 and C6+ hydrocarbons for a laboratory and on-line process application using
456                             three columns
      357 prEN 12007-1          Gas infrastructure - Pipelines for maximum operating pressure up to and           MECMA
457                             including 16 bar - Part 1: General functional recommendations
      357 prEN 12007-2          Gas infrastructure - Pipelines for maximum operating pressure up to and           MECMA
                                including 16 bar - Part 2: Specific functional recommendations for polyethylene
458                             (MOP up to and including 10 bar)
      357 prEN 12007-4          Gas infrastructure - Pipelines for maximum operating pressure up to and           MECMA
                                including 16 bar - Part 4: Specific functional recommendations for renovation
459
      357 prEN 12327            Gas infrastructure - Pressure testing, commissioning and decommissioning          MECMA
460                             procedures - Functional requirements
461 357 prEN 12732              Gas infrastructure - Welding steel pipework - Functional requirements             MECMA
    358 EN 1127-1:2011          Explosive atmospheres - Explosion prevention and protection - Part 1: Basic       MECMA
462                             concepts and methodology
463 358 prEN 1839               Determination of explosion limits of gases and vapours                            MECMA
      358 prEN 13237            Potentially explosive atmospheres - Terms and definitions for equipment and       MECMA
                                protective systems intended for use in potentially explosive atmospheres
464
      358 EN 13463-5:2011       Non-electrical equipment intended for use in potentially explosive atmospheres - MECMA
465                             Part 5: Protection by constructional safety 'c'
466 358   prEN 14491            Dust explosion venting protective systems                                        MECMA
    358   EN 15967:2011         Determination of maximum explosion pressure and the maximum rate of               MECMA
467                             pressure rise of gases and vapours
    368   FprEN 62075:2011      Audio/video, information and communication technology equipment -                 MECMA
468                             Environmentally conscious design
    374   prEN ISO/IEC 17020    Conformity assessment - General criteria for the operation of various types of    MECMA
469                             bodies performing inspection (ISO/IEC/DIS 17020:2011)
470 54    prEN ISO 15535 rev    General requirements for establishing anthropometric databases                    MMFPS
      137 prEN 50059:2011       Electrostatic hand-held spraying equipment - Safety requirements - Hand-held      MMFPS
471                             spraying equipment for non-ignitable coating materials
      176 FprEN 60855-1:2009    Live working - Insulating foam-filled tubes and solid rods -- Part 1: Tubes and   MMFPS
472                             rods of a circular cross-section
473 176 FprEN 60900:2011        Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.             MMFPS
    227 prEN 374-1              Protective gloves against chemicals and micro-organisms - Part 1: Terminology     MMFPS
474                             and performance requirements
475 227 FprEN 397               Industrial safety helmets                                                         MMFPS
476 227 prEN 795                Personal fall protection equipment - Anchor devices                               MMFPS
477 227 FprEN 812               Industrial bump caps                                                              MMFPS
478 227 FprEN 966               Helmets for airborne sports                                                       MMFPS
    227 FprEN 1078              Helmets for pedal cyclists and for users of skateboards and roller skates         MMFPS
479
480 227 FprEN 1384              Helmets for equestrian activities                                                 MMFPS
481 227 FprEN 1385              Helmets for canoeing and white water sports                                       MMFPS
482 227 prEN ISO 10256 rev      Head and face protection for use in ice hockey                                    MMFPS
      227 FprEN 12492           Mountaineering equipment - Helmets for mountaineers - Safety requirements         MMFPS
483                             and test methods
484 227 FprEN 13087-10          Protective helmets - Test methods - Part 10: Resistance to radiant heat           MMFPS
485 227 FprEN 13087-2           Protective helmets - Test methods - Part 2: Shock absorption                      MMFPS
      227 FprEN 13087-4         Protective helmets - Test methods - Part 4: Retention system effectiveness        MMFPS
486
487 227 FprEN 13087-5           Protective helmets - Test methods - Part 5: Retention system strength             MMFPS
488 227 FprEN 13087-6           Protective helmets - Test methods - Part 6: Field of vision                       MMFPS
489 227 FprEN 13484             Helmets for users of luges                                                        MMFPS
    227 FprEN 13781             Protective helmets for drivers and passengers of snowmobiles and bobsleighs       MMFPS
490
491 227 FprEN 14052             High performance industrial helmets                                               MMFPS




                                          Pagina 168 din 346
492 227 prEN 14143               Respiratory equipment - Self-contained re-breathing diving apparatus               MMFPS
493 227 FprEN 14572              High performance helmets for equestrian activities                                 MMFPS
      227 prEN ISO 15027-1       Immersion suits - Part 1: Constant wear suits, requirements including safety       MMFPS
494                              (ISO/DIS 15027-1:2010)
      227 prEN ISO 15027-2       Immersion suits - Part 2: Abandonment suits, requirements including safety         MMFPS
495                              (ISO/DIS 15027-2:2010)
496 227 prEN ISO 15027-3         Immersion suits - Part 3: Test methods (ISO/DIS 15027-3:2010)                      MMFPS
497 227 FprEN 15090              Footwear for firefighters                                                          MMFPS
      227 prEN ISO 20344         Personal protective equipment - Test methods for footwear (ISO/DIS                 MMFPS
498                              20344:2009)
499 227   prEN ISO 20345         Personal protective equipment - Safety footwear (ISO/DIS 20345:2009)               MMFPS
    227   prEN ISO 20347         Personal protective equipment - Occupational footwear (ISO/DIS 20347:2009)         MMFPS
500
    227   prEN ISO 20471         High-visibility warning clothing for professional use - Test methods and           MMFPS
501                              requirements (ISO/DIS 20471:2010)
    255   prEN ISO 11148-1       Hand-held non-electric power tools - Safety requirements - Part 1: Assembly        MMFPS
                                 power tools for non-threaded mechanical fasteners (ISO/DIS 11148-1:2009)
502
      255 prEN ISO 11148-10      Hand-held non-electric power tools - Safety requirements - Part 10:                MMFPS
503                              Compression power tools (ISO/DIS 11148-10:2009)
      255 prEN ISO 11148-11      Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and   MMFPS
504                              shears (ISO/DIS 11148-11:2009)
      255 prEN ISO 11148-2       Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off     MMFPS
505                              and crimping power tools (ISO/DIS 11148-2:2009)
      255 prEN ISO 11148-8       Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and     MMFPS
506                              polishers (ISO/DIS 11148-8:2009)
      255 prEN ISO 11148-9       Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders    MMFPS
507                              (ISO/DIS 11148-9:2009)
      255 FprEN 50144-2-7:2011   Safety of hand-held electric motor operated tools -- Part 2-7: Particular          MMFPS
508                              requirements for spray guns
      255 EN 60335-2-92:201X     Household and similar electrical appliances - Safety -- Part 2-92: Particular      MMFPS
                                 requirements for pedestrian-controlled mains-operated lawn scarifiers and
509                              aerators
      255 prEN 60335-2-91:2007   Household and similar electrical appliances - Safety -- Part 2-91: Particular      MMFPS
                                 requirements for walk-behind and hand-held lawn trimmers and lawn edge
510                              trimmers
      255 EN 61029-2-1:201X      Safety of transportable motor-operated electric tools -- Part 2-1: Particular      MMFPS
511                              requirements for circular saw benches
      255 EN 61029-2-9:201X      Safety of transportable motor-operated electric tools -- Part 2-9: Particular      MMFPS
512                              requirements for mitre saws
      255 FprEN 61029-2-5:2011   Safety of transportable motor-operated electric tools -- Part 2-5: Particular      MMFPS
513                              requirements for band saws
      255 FprEN 61029-2-8:2011   Safety of transportable motor-operated electric tools -- Part 2-8: Particular      MMFPS
514                              requirements for single spindle vertical moulders
      274 prEN ISO 3745          Acoustics - Determination of sound power levels and sound energy levels of         MMFPS
                                 noise sources using sound pressure - Precision methods for anechoic test
515                              rooms and hemi-anechoic test rooms (ISO/DIS 3745:2010)
      274 prEN ISO 8253-3        Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO/DIS          MMFPS
516                              8253-3:2010)
      274 prEN ISO 10819 rev     Mechanical vibration and shock - Hand-arm vibration - Method for the               MMFPS
                                 measurement and evaluation of the vibration transmissibility of gloves at the
517                              palm of the hand
      274 prEN 12786 rev         Safety of machinery - Rules for the drafting of the vibration clauses of safety    MMFPS
518                              standards
      274 prEN ISO 28927-12      Hand-held portable power tools - Test methods for evaluation of vibration          MMFPS
519                              emission - Part 12: Die grinders (ISO/DIS 28927-12:2010)
       52 prEN ISO 5667-3        Water quality - Sampling - Part 3: Preservation and handling of water samples      MMP
520                              (ISO/DIS 5667-3:2010)
       52 prEN ISO 5814          Water quality - Determination of dissolved oxygen - Electrochemical probe          MMP
521                              method (ISO/DIS 5814:2010)
       52 prEN ISO 6341          Water quality - Determination of the inhibition of the mobility of Daphnia magna   MMP
                                 Straus (Cladocera, Crustacea) - Acute toxicity test (ISO/DIS 6341:2010)
522
       52 prEN ISO 7887          Water quality - Examination and determination of colour (ISO/DIS 7887:2009)        MMP
523
       52 prEN ISO 8689-1 rev    Water quality - Biological classification of rivers - Part 1: Guidance on the      MMP
                                 interpretation of biological quality data from surveys of benthic
524                              macroinvertebrates
       52 prEN ISO 9308-1 rev    Water quality - Detection and enumeration of Escherichia coli and coliform         MMP
525                              bacteria - Part 1: Membrane filtration method




                                           Pagina 169 din 346
       52 prEN 12120 rev          Chemicals used for treatment of water intended for human consumption -                  MMP
526                               Sodium hydrogen sulfite
       52 prEN 12123 rev          Chemicals used for treatment of water intended for human consumption -                  MMP
527                               Ammonium sulfate
       52 prEN 12126 rev          Chemicals used for treatment of water intended for human consumption -                  MMP
528                               Liquefied ammonia
       52 prEN 13752 rev          Products used for treatment of water intended for human consumption -                   MMP
529                               Manganese dioxide
       52 prEN ISO 16665 rev      Water quality - Guidelines for quantitative sampling and sample processing of           MMP
530                               marine soft-bottom macrofauna
       53 prEN 482                Workplace exposure - General requirements for the performance of procedures             MMP
531                               for the measurement of chemical agents
       53 prEN 14211              Ambient air quality - Standard method for the measurement of the concentration          MMP
                                  of nitrogen dioxide and nitrogen monoxide by chemiluminescence
532
       53 prEN 14212              Ambient air quality - Standard method for the measurement of the concentration          MMP
533                               of sulphur dioxide by ultraviolet fluorescence
       53 prEN 14625              Ambient air quality - Standard method for the measurement of the concentration          MMP
534                               of ozone by ultraviolet photometry
       53 prEN 14626              Ambient air quality - Standard method for the measurement of the concentration          MMP
                                  of carbon monoxide by nondispersive infrared spectroscopy
535
      360 prEN 840-1 rev          Mobile waste containers - Containers with 2 wheels with a capacity up to 400 l          MMP
536                               for comb lifting devices, dimensions and design
      360 prEN 840-2 rev          Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to        MMP
                                  1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and
537                               design
      360 prEN 840-3 rev          Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to        MMP
                                  1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions
538                               and design
      360 prEN 840-4 rev          Mobile waste containers - Part 4: Containers with 4 wheels with a capacity up to        MMP
                                  1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices -
539                               Dimensions and design
      360 prEN 840-5 rev          Mobile waste containers - Part 5: Performance requirements and test methods             MMP
540
541 360   prEN 840-6 rev          Mobile waste containers - Part 6: Safety and health requirements                        MMP
    360   EN 1501-1:2011          Refuse collection vehicles - General requirements and safety requirements -             MMP
542                               Part 1: Rear loaded refuse collection vehicles
    360   EN 1501-5:2011          Refuse collection vehicles - General requirements and safety requirements -             MMP
543                               Part 5: Lifting devices for refuse collection vehicles
544 360   FprEN 16192             Characterization of waste - Analysis of eluates                                         MMP
       22 prEN 45502-1            Active implantable medical devices - Part 1: General requirements for safety,           MS
545                               marking and information to be provided by the manufacturer
       22 EN 60601-2-46:201X      Medical electrical equipment -- Part 2-46: Particular requirements for the basic        MS
546                               safety and essential performance of operating tables
       22 FprEN 60601-2-16:2008   Medical electrical equipment -- Part 2-16: Particular requirements for basic            MS
                                  safety and essential performance of haemodialysis, haemodiafiltration and
547                               haemofiltration equipment
       22 FprEN 60601-2-25:2011   Medical electrical equipment -- Part 2-25: Particular requirements for basic            MS
548                               safety and essential performance of electrocardiographs
      377 FprEN ISO 1797-1        Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals               MS
549                               (ISO/FDIS 1797-1:2011)
      377 FprEN 1865-3            Patient handling equipment used in road ambulances - Part 3: Heavy duty                 MS
550                               stretcher
      377 FprEN 1865-4            Patient handling equipment used in road ambulances - Part 4: Foldable patient           MS
551                               transfer chair
      377 FprEN 1865-5            Patient handling equipment used in road ambulances - Part 5: Stretcher support          MS
552
      377 FprEN ISO 7711-2        Dentistry - Rotary diamond instruments - Part 2: Discs (ISO/FDIS 7711-2:2011)           MS
553
      377 FprEN ISO 9999          Assistive products for persons with disability - Classification and terminology        MS
554                               (ISO/FDIS 9999:2011)
      377 prEN ISO 10993-12       Biological evaluation of medical devices - Part 12: Sample preparation and             MS
555                               reference materials (ISO/DIS 10993-12:2010)
      377 FprEN ISO 14160         Sterilization of health care products - Liquid chemical sterilizing agents for single- MS
                                  use medical devices utilizing animal tissues and their derivatives - Requirements
                                  for characterization, development, validation and routine control of a sterilization
                                  process for medical devices (ISO/FDIS 14160:2011)
556
      377 prEN ISO 15189          Medical laboratories - Requirements for quality and competence (ISO/DIS                 MS
557                               15189:2011)




                                            Pagina 170 din 346
        4 prEN 50149:2009      Railway applications - Fixed installations - Electric traction - Copper and copper MTI
558                            alloy grooved contact wires
        4 prEN 50152-1:2011    Railway applications - Fixed installations - Particular requirements for alternating MTI
                               current switchgear -- Part 1: Circuit-breakers with nominal voltage above 1 kV
559
        4 prEN 50152-2:2011    Railway applications - Fixed installations - Particular requirements for alternating MTI
                               current switchgear -- Part 2: Disconnectors, earthing switches and switches with
560                            nominal voltage above 1 kV
        4 FprEN 50317:2011     Railway applications - Current collection systems - Requirements for and             MTI
                               validation of measurements of the dynamic interaction between pantograph and
561                            overhead contact line
        4 prEN 50367:2009      Railway applications - Current collection systems - Technical criteria for the       MTI
                               interaction between pantograph and overhead line (to achieve free access)
562
        4 FprEN 50388:2011     Railway Applications - Power supply and rolling stock - Technical criteria for the   MTI
                               coordination between power supply (substation) and rolling stock to achieve
563                            interoperability
        4 prEN 50463-1:2011    Railway applications - Energy measurement on board trains -- Part 1: General         MTI
564
        4 prEN 50463-2:2011    Railway applications - Energy measurement on board trains -- Part 2: Energy          MTI
565                            measuring
        4 prEN 50463-3:2011    Railway applications - Energy measurement on board trains -- Part 3: Data            MTI
566                            handling
        4 prEN 50463-4:2011    Railway applications - Energy measurement on board trains -- Part 4:                 MTI
567                            Communication
        4 prEN 50463-5:2011    Railway applications - Energy measurement on board trains -- Part 5: Conformity      MTI
568                            assessment
        4 FprEN 50467:2011     Railway applications - Rolling stock - Electrical connectors, requirements and       MTI
569                            test methods
        4 FprEN 50526-1:2011   Railway applications - Fixed installations - D.C. surge arresters and voltage        MTI
570                            limiting devices -- Part 1: Surge arresters
       72 prEN 1915-1          Aircraft ground support equipment - General requirements - Part 1: Basic safety      MTI
571                            requirements
       72 prEN 12312-1         Aircraft ground support equipment - Specific requirements - Part 1: Passenger        MTI
572                            stairs
       72 prEN 12312-9         Aircraft ground support equipment - Specific requirements - Part 9:                  MTI
573                            Container/Pallet loaders
574 142 prEN 60092-507:2007    Electrical installations in ships -- Part 507: Small vessels                         MTI
    143 FprEN 61993-2:2011     Maritime navigation and radiocommunication equipment and systems -               MTI
                               Automatic Identification Systems (AIS) -- Part 2: Class A shipborne equipment of
                               the universal automatic identification system (AIS) - Operational and
                               performance requirements, methods of test and required test results
575
      146 FprEN 13146-1        Railway applications - Track - Test methods for fastening systems - Part 1:          MTI
576                            Determination of longitudinal rail restraint
      146 FprEN 13146-2        Railway applications - Track - Test methods for fastening systems - Part 2:          MTI
577                            Determination of torsional resistance
      146 FprEN 13146-3        Railway applications - Track - Test methods for fastening systems - Part 3:          MTI
578                            Determination of attenuation of impact loads
      146 FprEN 13146-4        Railway applications - Track - Test methods for fastening systems - Part 4:          MTI
579                            Effect of repeated loading
      146 FprEN 13146-5        Railway applications - Track - Test methods for fastening systems - Part 5:          MTI
580                            Determination of electrical resistance
      146 FprEN 13146-6        Railway applications - Track - Test methods for fastening systems - Part 6:          MTI
581                            Effect of severe environmental conditions
      146 FprEN 13146-7        Railway applications - Track - Test methods for fastening systems - Part 7:          MTI
582                            Determination of clamping force
      146 FprEN 13146-8        Railway applications - Track - Test methods for fastening systems - Part 8: In       MTI
583                            service testing
      146 FprEN 13231-3        Railway applications - Track - Acceptance of works - Part 3: Acceptance of           MTI
584                            reprofiling rails in track
      146 FprEN 13272          Railway applications - Electrical lighting for rolling stock in public transport     MTI
585                            systems
      146 prEN 13481-1         Railway applications - Track - Performance requirements for fastening systems -      MTI
586                            Part 1: Definitions
      146 prEN 13481-2         Railway applications - Track - Performance requirements for fastening systems -      MTI
587                            Part 2: Fastening systems for concrete sleepers
      146 prEN 13481-3         Railway applications - Track - Performance requirements for fastening systems -      MTI
588                            Part 3: Fastening systems for wood sleepers
      146 prEN 13481-4         Railway applications - Track - Performance requirements for fastening systems -      MTI
589                            Part 4: Fastening systems for steel sleepers




                                         Pagina 171 din 346
      146 prEN 13481-5       Railway applications - Track - Performance requirements for fastening systems - MTI
                             Part 5: Fastening systems for slab track with rail on the surface or rail embedded
590                          in a channel
      146 prEN 13481-7       Railway applications - Track - Performance requirements for fastening systems - MTI
                             Part 7: Special fastening systems for switches and crossings and check rails
591
      146 prEN 15153-1       Railway applications - External visible and audible warning devices for trains -    MTI
592                          Part 1: Head, marker and tail lamps
      146 prEN 15153-2       Railway applications - External visible and audible warning devices for trains -    MTI
593                          Part 2: Warning horns
      199 FprEN ISO 11591    Small craft, engine-driven - Field of vision from helm position (ISO/FDIS           MTI
594                          11591:2011)
      199 prEN ISO 12217-1   Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-   MTI
                             sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-1:2010)
595
      199 prEN ISO 12217-2   Small craft - Stability and buoyancy assessment and categorization - Part 2:        MTI
                             Sailing boats of hull length greater than or equal to 6 m (ISO/DIS 12217-2:2010)
596
      199 prEN ISO 12217-3   Small craft - Stability and buoyancy assessment and categorization - Part 3:        MTI
597                          Boats of hull length less than 6 m (ISO/DIS 12217-3:2010)
      303 FprEN 61821:2011   Electrical installations for lighting and beaconing of aerodromes - Maintenance     MTI
                             of aeronautical ground lighting constant current series circuits
598




                                       Pagina 172 din 346
                                            SECTIUNEA 3, b)-PASIV
 Programul de standardizare european CEN-CENELEC cu proiectele standardelor
Nr                                                                                                                           Mini-
          CT          Indicativ EN                                   Titlul in limba engleza
Crt                                                                                                                          ster
      1   95 EN ISO 6887-4:2003/FprA1   Microbiology of food and animal feeding stuffs - Preparation of test samples,       MADR
                                        initial suspension and decimal dilutions for microbiological examination - Part
                                        4: Specific rules for the preparation of products other than milk and milk
                                        products, meat and meat products, and fish and fishery products (ISO 6887-
                                        4:2003/FDAM 1:2011)
      2   95 prEN ISO 11133 rev         Microbiology of food, animal feeding stuffs and water - Preparation,                MADR
                                        production, storage and performance testing of culture media
      3   95 EN 16006:2011              Animal feeding stuffs - Determination of the Sum of Fumonisin B1 & B2 in            MADR
                                        compound animal feed with immunoaffinity clean-up and RP-HPLC with
                                        fluorescence detection after pre- or post-column derivatisation
      4   95 EN 16007:2011              Animal feeding stuffs - Determination of Ochratoxin A in animal feed by             MADR
                                        immunoaffinity column clean-up and High Performance Liquid
                                        Chromatography with fluorescence detection
      5   95 EN ISO 16140:2003/FprA1    Microbiology of food and animal feeding stuffs - Protocol for the validation of     MADR
                                        alternative methods - Amendment 1 (ISO 16140:2003/FDAM1:2011)

      6   95 prEN 16158                 Animal feeding stuffs - Determination of semduramicin content - Liquid              MADR
                                        chromatographic method using a tree analytical approach
      7   95 prEN 16159                 Animal feeding stuffs - Determination of selenium by hydride generation             MADR
                                        atomic absorption spectrometry (HGAAS) after microwave digestion
                                        (extraction with 65% nitric acid and 30% hydrogen peroxide)
      8   95 prEN 16160                 Animal feeding stuffs - Determination of Hydrocyanic acid by HPLC                   MADR
      9   95 prEN 16162                 Animal feeding stuffs - Determination of Decoquinate by HPLC with                   MADR
                                        fluorescence detection
 10       95 prEN 16206                 Animal feeding stuffs - Determination of arsenic by hydride generation atomic       MADR
                                        absorption spectrometry (HGAAS) after microwave pressure digestion
                                        (Extraction with 65% nitric acid and 30% hydrogen peroxide)
 11       95 prEN 16215                 Animal feed - Determination of dioxins and dioxin-like PCBs by GC/HRMS and MADR
                                        of indicator PCBs by GC/HRMS
 12       95 prEN 16277                 Animal feeding stuffs - Determination of mercury by cold-vapour atomic     MADR
                                        absorption spectrometry (CVAAS) after microwave pressure digestion
                                        (extraction with 65 % nitric acid and 30 % hydrogen peroxide)

 13       95 prEN 16278                 Animal feeding stuffs - Determination of inorganic arsenic                          MADR
 14       95 prEN 16279                 Animal Feeding stuffs - Determination of fluoride content after hydrochloric        MADR
                                        acid treatment by ion-sensitive electrode method (ISE)
 15       95 FprEN ISO 22118            Microbiology of food and animal feeding stuffs - Polymerase chain reaction          MADR
                                        (PCR) for the detection and quantification of food-borne pathogens -
                                        Performance characteristics (ISO/FDIS 22118:2011)
 16       95 FprEN ISO 22119            Microbiology of food and animal feeding stuffs - Real-time polymerase chain         MADR
                                        reaction (PCR) for the detection of food-borne pathogens - General
                                        requirements and definitions (ISO/FDIS 22119:2011)
 17       95 EN ISO 24276:2006/prA1     Foodstuffs - Methods of analysis for the detection of genetically modified          MADR
                                        organisms and derived products - General requirements and definitions

 18 180 EN ISO 3493:2007/prA1           Vanilla - Vocabulary                                                                MADR
 19 180 prEN ISO 5526                   Cereals, pulses and other food grains - Nomenclature                                MADR
 20 180 prEN ISO 5527                   Cereals - Vocabulary                                                                MADR
 21 180 EN ISO 9936:2006/FprA1          Animal and vegetable fats and oils - Determination of tocopherol and                MADR
                                        tocotrienol contents by high-performance liquid chromatography - Amendment
                                        1: Updating of reagents and confirmation of statistical data validity (ISO
                                        9936:2006/FDAM 1:2011)
 22 180 prEN ISO 11746                  Rice - Determination of biometric characteristics of kernels (ISO/DIS               MADR
                                        11746:2010)
 23 180 EN ISO 15753:2006/FprA1         Animal and vegetable fats and oils - Determination of polycyclic aromatic           MADR
                                        hydrocarbons (ISO 15753:2006/DAM 1:2010)
 24 180 prEN 15948                      Cereals - Determination of moisture and protein - Method using Near-Infrared-       MADR
                                        Transmittance in Method using Near-Infrared-Spectroscopy in whole kernels

 25 180 FprEN ISO 17932                 Palm oil - Determination of the deterioration of bleachability index (DOBI) and     MADR
                                        carotene content (ISO/FDIS 17932:2011)
 26 285 prEN ISO 12782-1                Soil quality - Parameters for geochemical modelling of leaching and                 MADR
                                        specification of constituents in soils and soil materials - Part 1: Extraction of
                                        amorphous iron oxides and hydroxides with ascorbic acid (ISO/DIS 12782-
                                        1:2010)




                                                Pagina 173 din 346
27 285 prEN ISO 12782-2      Soil quality - Parameters for geochemical modelling of leaching and                  MADR
                             specification of constituents in soils and materials - Part 2: Extraction of
                             crystalline iron oxides and hydroxides with dithionite (ISO/DIS 12782-2:2010)

28 285 prEN ISO 12782-3      Soil quality - Parameters for geochemical modelling of leaching and          MADR
                             specification of constituents in soils and materials - Part 3: Extraction of
                             aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO/DIS
                             12782-3:2010)
29 285 prEN ISO 12782-4      Soil quality - Parameters for geochemical modelling of leaching and                MADR
                             specification of constituents in soils and materials - Part 4: Extraction of humic
                             substances from solid samples (ISO/DIS 12782-4:2010)
30 285 prEN ISO 12782-5      Soil quality - Parameters for geochemical modelling of leaching and                MADR
                             specification of constituents in soils and materials - Part 5: Extraction of humic
                             substances from aqueous samples (ISO/DIS 12782-5:2010)
31 285 FprEN 16086-1         Soil improvers and growing media - Determination of plant response - Part 1:         MADR
                             Pot growth test with Chinese cabbage
32 285 FprEN 16086-2         Soil improvers and growing media - Determination of plant response - Part 2:         MADR
                             Petri dish test using cress
33 285 FprEN 16087-1         Soil improvers and growing media - Determination of the aerobic biological           MADR
                             activity - Part 1: Oxygen uptake rate (OUR)
34 285 FprEN 16087-2         Soil improvers and growing media - Determination of the aerobic biological           MADR
                             activity - Part 2: Self heating test for compost
35 285 EN ISO 23611-1:2011   Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin    MADR
                             extraction of earthworms (ISO 23611-1:2006)
36 285 EN ISO 23611-2:2011   Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction      MADR
                             of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2006)

37 285 EN ISO 23611-3:2011   Soil quality - Sampling of soil invertebrates - Part 3: Sampling and soil            MADR
                             extraction of enchytraeids (ISO 23611-3:2007)
38 285 EN ISO 23611-4:2011   Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and     MADR
                             identification of soil-inhabiting nematodes (ISO 23611-4:2007)

39 285 EN ISO 23753-1:2011   Soil Quality - Determination of dehydrogenase activity in soil - Part 1: Method MADR
                             using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005)
40 285 EN ISO 23753-2:2011   Soil Quality - Determination of dehydrogenase activity in soils - Part 2: Method MADR
                             using iodotetrazolium chloride (INT) (ISO 23753-2:2005)
41 216 FprEN 54-27           Fire detection and fire alarm systems - Part 27: Duct smoke detectors            MAI
42 216 FprEN 54-29           Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors -       MAI
                             Point detectors using a combination of smoke and heat sensors

43 216 FprEN 54-3            Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders        MAI

44 216 FprEN 54-30           Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors -       MAI
                             Point detectors using a combination of carbon monoxide and heat sensors

45 216 prEN 54-22            Fire detection and fire alarm system - Part 22 : Resettable line type heat           MAI
                             detectors
46 216 prEN 54-28            Fire detection and fire alarm system - Part 28: Non-resettable line type heat        MAI
                             detectors
47 216 FprEN 12101-9         Smoke and heat control systems - Part 9: Control panels                              MAI
48 216 FprEN 12259-12        Fixed firefighting systems - Components for sprinkler and water spray systems MAI
                             - Part 12: Pumps
49 216 FprEN 12259-9         Fixed firefighting systems - Components for sprinkler and water spray systems MAI
                             - Part 9: Deluge valve assemblies
50 216 EN 15889:2011         Fire-fighting hoses - Test methods                                            MAI
51 217 prEN 1366-11          Fire resistance tests for service installations - Part 11: Fire protective systems   MAI
                             for cable systems and associated components
52 217 prEN 1366-12          Fire resistance tests for service installations - Part 12: Non-mechanical fire       MAI
                             dampers
53 217 FprEN 15882-1         Extended application of results from fire resistance tests for service               MAI
                             installations - Part 1: Ducts
54 217 prEN 15882-2          Extended application of results from fire resistance tests for service               MAI
                             installations - Part 2: Dampers
55 217 prEN 45545-5:2010     Railway applications - Fire protection on railway vehicles -- Part 5: Fire safety    MAI
                             requirements for electrical equipment including that of trolley buses, track
                             guided buses and magnetic levitation vehicles
56 380 FprEN 15759-1         Conservation of cultural property - Indoor climate - Part 1: Guidelines for          MCC
                             heating churches, chapels and other places of worship
57 380 FprEN 15898           Conservation of cultural property - Main general terms and definitions               MCC
58 380 FprEN 15946           Conservation of cultural property - Packing principles for transport                 MCC




                                     Pagina 174 din 346
59 380 prEN 16085              Conservation of Cultural property - Methodology for sampling from materials of MCC
                               cultural property - General rules
60 380 prEN 16095              Conservation of cultural property - Condition report of movable heritage -     MCC
                               Visual inspection and description of the condition of movable heritage

61 380 prEN 16096              Conservation of cultural property - Condition survey of immovable heritage          MCC

62 380 prEN 16141              Conservation of cultural heritage - Guidelines for management of                    MCC
                               environmental conditions - Open storage facilities: definitions and
                               characteristics of collection centres dedicated to the preservation and
                               management of cultural heritage
63 380 prEN 16242              Conservation of cultural property - Procedures and instruments for measuring        MCC
                               humidity in the air and moisture exchanges between air and cultural property

64   6 FprEN 62553:2010        Methods of measurement for digital network - Performance characteristics of         MCSI
                               terrestrial digital multimedia transmission network
65 138 prEN 50377-16-1:2010    Connector sets and interconnect components to be used in optical fibre              MCSI
                               communication systems - Product specifications -- Part 16-1: Type LF3 APC
                               simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode
                               fibre with titanium composite ferrule for Category C


66 138 FprEN 50411-2-2:2011    Fibre organisers and closures to be used in optical fibre communication             MCSI
                               systems - Product specifications -- Part 2-2: Sealed pan fibre splice closures
                               Type 1, for category S & A
67 138 FprEN 50411-2-3:2011    Fibre organisers and closures to be used in optical fibre communication             MCSI
                               systems - Product specifications -- Part 2-3: Sealed inline fibre splice closures
                               Type 1, for category S & A
68 138 FprEN 50411-2-4:2011    Fibre organisers and closures to be used in optical fibre communication         MCSI
                               systems - Product specifications -- Part 2-4: Sealed dome fibre splice closures
                               Type 1, for category S & A
69 138 prEN 50411-3-1:2010     Fibre organisers and closures to be used in optical fibre communication       MCSI
                               systems - Product specifications -- Part 3-1: Fibre management system, splice
                               wall box, for category C & G
70 138 prEN 50411-3-3:2010     Fibre organisers and closures to be used in optical fibre communication             MCSI
                               systems - Product specifications -- Part 3-3: Singlemode optical fibre fusion
                               splice protectors
71 138 prEN 50411-3-6:2010     Fibre organisers and closures to be used in optical fibre communication         MCSI
                               systems - Product specifications -- Part 3-6: Multimode mechanical fibre splice

72 138 EN 50516-1-1:201X       Industrial connector sets and interconnect components to be used in optical         MCSI
                               fibre control and communication systems - Product specifications -- Part 1-1:
                               Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and
                               A1b multimode fibre to meet the requirements of category I (industrial
                               environments) as specified in IEC 61753-1-3


73 138 EN 50516-2-1:201X       Industrial connector sets and interconnect components to be used in optical         MCSI
                               fibre control and communication systems - Product specifications -- Part 2-1:
                               Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and
                               A1b multimode fibre to meet the requirements of category I (industrial
                               environments) as specified in EN 50173-1 and IEC 61753-1-3


74 138 prEN 50551-2:2010       Simplex and duplex cables to be used for cords -- Part 2: Detailed                  MCSI
                               Specification and minimum requirements for simplex ruggedized single mode
                               cables to be used for patchcord/cords Category U
75 138 FprEN 60793-2:2011      Optical fibres -- Part 2: Product specifications - General                          MCSI
76 138 FprEN 60794-1-1:2010    Optical fibre cables -- Part 1-1: Generic specification - General                   MCSI
77 138 FprEN 60794-2-10:2011   Optical fibre cables -- Part 2-10: Indoor optical fibre cables - Family             MCSI
                               specification for simplex and duplex cables
78 138 FprEN 60794-2-11:2011   Optical fibre cables -- Part 2-11: Indoor optical fibre cables - Detailed           MCSI
                               specification for simplex and duplex cables for use in premises cabling
79 138 FprEN 60794-2-21:2011   Optical fibres cables -- Part 2-21: Indoor optical fibre cables - Detailed          MCSI
                               specification for multi-fibre optical distribution cables for use in premises
                               cabling
80 138 FprEN 60794-2-31:2011   Optical fibre cables -- Part 2-31: Indoor optical fibre cables - Detailed           MCSI
                               specification for optical fibre ribbon cables for use in premises cabling
81 138 FprEN 61290-4-1:2010    Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-     MCSI
                               wavelength method
82 138 FprEN 61290-4-2:2010    Optical amplifiers - Test methods -- Part 4-2: Gain transient parameters -          MCSI
                               Broadband source method
83 138 FprEN 61291-1:2011      Optical amplifiers -- Part 1: Generic specification                                 MCSI




                                        Pagina 175 din 346
 84 138 FprEN 61291-2:2011          Optical amplifiers -- Part 2: Digital applications - Performance specification MCSI
                                    template
 85 138 FprEN 61291-4:2011          Optical amplifiers -- Part 4: Multichannel applications - Performance          MCSI
                                    specification template
 86 138 EN 61300-3-46:201X          Fibre optic interconnecting devices and passive components - Basic test and MCSI
                                    measurement procedures -- Part 3-46: Measurement - Bore diameter for guide
                                    pin in MT ferrules
 87 138 FprEN 61300-3-33:2011       Fibre optic interconnecting devices and passive components - Basic test and        MCSI
                                    measurement procedures -- Part 3-33: Examinations and measurements -
                                    Withdrawal force from a resilient alignment sleeve using gauge pins

 88 138 FprEN 61300-3-7:2008        Fibre optic interconnecting devices and passive components - Basic test and        MCSI
                                    measurement procedures -- Part 3-7: Examinations and measurements -
                                    Wavelength dependence of attenuation and return loss of single mode
                                    components
 89 138 FprEN 61314-1-1:2010        Fibre optic interconnecting devices and passive components - Fibre optic fan-      MCSI
                                    outs -- Part 1-1: Blank detail specification
 90 138 FprEN 61754-26:2010         Fibre optic interconnecting devices and passive components - Fibre optic           MCSI
                                    connector interfaces -- Part 26: Type SF connector famlily
 91 138 FprEN 61754-28:2011         Fibre optic interconnecting devices and passive components - Fibre optic           MCSI
                                    connector interfaces -- Part 28: Type LF3 connector family
 92 138 FprEN 61754-29:2011         Fibre optic interconnecting devices and passive components - Fibre optic           MCSI
                                    connector interfaces -- Part 29: Type BLINK connector series for Category C.
                                    Controlled environment
 93 138 FprEN 61757-1:2011          Fibre optic sensors -- Part 1: Generic specification                               MCSI
 94 138 FprEN 62149-1:2011          Fibre optic active components and devices - Performance standards -- Part 1:       MCSI
                                    General and guidance
 95 138 FprEN 62149-7:2011          Fibre optic active components and devices - Performance standards -- Part 7:       MCSI
                                    1 310 nm discrete vertical cavity surface emitting laser devices
 96 138 FprEN 62150-3:2011          Fibre optic active components and devices - Test and measurement                   MCSI
                                    procedures -- Part 3: Optical power variation induced by mechanical
                                    disturbance in optical receptacles and transceiver interfaces
 97 138 FprEN 62496-2-1:2011        Optical circuit boards - Basic test and measurement procedures -- Part 2-1:        MCSI
                                    Measurements - Optical attenuation and isolation
 98 138 FprEN 62572-3:2011          Fibre optic active components and devices - Reliability standards -- Part 3:       MCSI
                                    Laser modules used for telecommunication
 99 204 prEN 14169-1                Protection profiles for secure signature creation device - Part 1: Overview        MCSI

100 204 prEN 14169-2                Protection Profile for Secure signature creation device - Part 2: Device with      MCSI
                                    key generation
101 204 prEN 14169-3                Protection profiles for secure signature creation device - Part 3: Device with     MCSI
                                    key import
102 204 prEN 14169-4                Protection profiles for secure signature creation device - Part 4: Extension for   MCSI
                                    device with key generation and trusted communication with certificate
                                    generation application
103 204 prEN 14169-5                Protection profiles for secure signature creation device - Part 5: Device with     MCSI
                                    key generation and trusted communication with signature-creation application

104 204 prEN 14169-6                Protection profiles for secure signature creation device - Part 6: Device with     MCSI
                                    key import and trusted communication with signature-creation application

105 204 prEN 16248-1                Security requirements for device for authentication - Part 1: Protection profile   MCSI
                                    for core functionality
106 204 prEN 16248-2                Security requirements for device for authentication - Part 2: Protection profile   MCSI
                                    for extension for trusted channel to certificate generation application

107 204 prEN 16248-3                Security requirements for device for authentication - Part 3: Additional           MCSI
                                    functionality for security targets
108 207 EN 50173-4:2007/prAB:2011   Information technology - Generic cabling systems -- Part 4: Homes                  MCSI
109 207 prEN 50491-6-1:2011         General requirements for Home and Building Electronic Systems (HBES) and           MCSI
                                    Building Automation and Control Systems (BACS) -- Part 6-1: HBES
                                    installations - Installation and planning
110 300 FprEN ISO/IEC 19762-1       Information technology - Automatic identification and data capture (AIDC)          MCSI
                                    techniques -- Harmonized vocabulary - Part 1: General terms relating to AIDC
                                    (ISO/IEC 19762-1:2008)
111 300 FprEN ISO/IEC 19762-3       Information technology - Automatic identification and data capture (AIDC)          MCSI
                                    techniques - Harmonized vocabulary - Part 3: Radio frequency identification
                                    (RFID) (ISO/IEC 19762-3:2008)
112 319 prEN ISO 1828               Health informatics - Categorial structure for classifications and coding systems MCSI
                                    of surgical procedures (ISO/DIS 1828:2010)




                                            Pagina 176 din 346
113 319 prEN ISO 11073-10472                Health Informatics - Personal Health Device Communication - Part 10472:             MCSI
                                            Device Specialization - Medication Monitor
114 319 prEN ISO 13119                      Health informatics - Clinical knowledge resources - Metadata (ISO/DIS               MCSI
                                            13119:2011)
115 319 prEN ISO 13120                      Health informatics - Syntax to represent the content of healthcare                  MCSI
                                            classification systems - Classification Markup Language (ClaML) (ISO/DIS
                                            13120:2011)
116 319 prEN ISO 13972                      Health informatics - Quality Requirements and Methodology for Detailed              MCSI
                                            Clinical Models
117 319 prEN ISO 27953-1                    Health informatics - Individual case safety reports (ICSRs) in                      MCSI
                                            pharmacovigilance - Part 1: The framework for adverse event reporting
                                            (ISO/DIS 27953-1:2010)
118 319 prEN ISO 27953-2                    Health informatics - Individual case safety reports (ICSRs) in              MCSI
                                            pharmacovigilance - Part 2: Human pharmaceutical reporting requirements for
                                            ICSR (ISO/DIS 27953-2:2010)
119 375 FprEN 60268-16:2011                 Sound system equipment -- Part 16: Objective rating of speech intelligibility by MCSI
                                            speech transmission index
120 375 FprEN 60728-13-1:2011               Cable networks for television signals, sound signals and interactive services -- MCSI
                                            Part 13-1: Brandwith expansion for broadcast signal over FTTH system

121 375 EN 61937-1:2007/FprA1:2011          Digital audio - Interface for non-linear PCM encoded audio bitstreams applying      MCSI
                                            IEC 60958 -- Part 1: General
122 375 EN 61937-2:2007/FprA1:2011          Digital audio - Interface for non-linear PCM encoded audio bitstreams applying      MCSI
                                            IEC 60958 -- Part 2: Burst-info
123 375 FprEN 62516-2:2010                  Terrestrial digital multimedia broadcasting (T-DMB) receiver -- Part 2:             MCSI
                                            Interactive data services using BIFS
124 375 FprEN 62605:2011                    Multimedia systems and equipment - Multimedia e-publishing and e-books -            MCSI
                                            Interchange format for e-dictionaries
125 375 FprEN 62634:2011                    Radio data system (RDS) - Receiver products and characteristics - Methods of        MCSI
                                            measurements
126 379 EN 14142-1:2011                     Postal services - Address databases - Part 1: Components of postal addresses        MCSI

127 379 FprEN 15982                         Metadata for Learning Opportunities (MLO) - Advertising                             MCSI
128 113 prEN 15732                          Light weight fill and thermal insulation products for civil engineering             MDRT
                                            applications (CEA) - Expanded clay lightweight aggregate products (LWA)

129 113 EN 15814:2011                       Polymer modified bituminous thick coatings for waterproofing - Definitions and MDRT
                                            requirements
130 113 prEN 16025-1                        Themal and/or sound insulating products in building construction - Bound EPS MDRT
                                            ballastings - Part 1: Requirements for factory premixed EPS dry plaster

131 113 prEN 16025-2                        Themal and/ or sound insulating products in building construction - Bound           MDRT
                                            EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster

132 113 prEN 16069                          Thermal insulation products for buildings - Factory made products of                MDRT
                                            polyethylene foam (PEF) - Specification
133 113 prEN 16240                          Light transmitting flat solid polycarbonate (PC) sheets for internal and external   MDRT
                                            roofs, walls and ceilings - Requirements and test methods
134 114 EN 12004:2007/FprA1                 Adhesives for tiles - Requirements, evaluation of conformity, classification and    MDRT
                                            designation
135 136 FprHD 60364-4-442:201X              Low voltage electrical installations -- Part 4-442: Protection for safety -         MDRT
                                            Protection against voltage disturbances and electromagnetic disturbances

136 136 FprHD 60364-5-557:2011          Low-voltage electrical installations -- Part 5-557: Selection and erection of           MDRT
                                        electrical equipment - Auxiliary circuits
137   136 FprHD 60364-7-718:2010        Low-voltage electrical installations -- Part 7-718: Requirements for special            MDRT
                                        installations or locations - Communal facilities and workplaces
138   136 FprHD 60364-7-722:2011        Low voltage electrical installations -- Part 7-722: Requirements for special            MDRT
                                        installations or locations - Supply of Electric vehicle
139   136 HD 60364-5-51:2009/AA:20XX    Electrical installations of buildings -- Part 5-51: Selection and erection of           MDRT
                                        electrical equipment - Common rules
140   136 HD 60364-5-56:2010/FprAA:2011 Low-voltage electrical installations -- Part 5-56: Selection and erection of            MDRT
                                        electrical equipment - Safety services
141   136 HD 60364-7-                   Low-voltage electrical installations -- Part 7-709: Requirements for special            MDRT
          709:2009/FprA1:2010           installations or locations - Marinas and similar locations
142   136 prHD 60364-7-710:2010         Low-voltage electrical installations -- Part 7-710: Requirements for special            MDRT
                                        installations or locations - Medical locations




                                                     Pagina 177 din 346
143 136 prHD 60364-7-719:2010              Low-voltage installations -- Part 7-719: Requirements for special installations     MDRT
                                           or locations - Lighting installations for advertising signs with a rated output
                                           voltage not exceeding 1 000 V, which are illuminated by hot-cathode-
                                           fluorescent-lamps, luminous-discharge tubes (neon-tubes), inductive
                                           discharge lamps, light emitting diodes (LED) and/or LED modules


144 186 FprEN 12566-6                  Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated              MDRT
                                       treatment units for septic tank effluent
145 186   prEN 12566-7                 Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated              MDRT
                                       tertiary treatment units
146 187   EN 1317-5:2007+A1:2008/FprA2 Road restraint systems - Part 5: Product requirements and evaluation of                 MDRT
                                       conformity for vehicle restraint systems
147 187   FprEN 1871                   Road marking materials - Paint, thermoplastic and cold plastic materials -              MDRT
                                       Specifications
148 187   FprEN 12697-21               Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation           MDRT
                                       using plate specimens
149 187   FprEN 12697-45               Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation            MDRT
                                       Ageing Tensile Stiffness (SATS) Conditioning Test
150 187   FprEN 12697-46               Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low                   MDRT
                                       Temperature Cracking and Properties by Uniaxial Tension Tests
151 187   EN 12899-1:2007/prA1         Fixed, vertical road traffic signs - Part 1: Fixed signs                                MDRT
152 187 EN 12899-2:2007/prA1               Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) MDRT

153 187 EN 12899-3:2007/prA1               Fixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors   MDRT

154 187 EN 12899-4:2007/prA1               Fixed, vertical road traffic signs - Part 4: Factory production control             MDRT
155 187 EN 12899-5:2007/prA1               Fixed, vertical road traffic signs - Part 5: Initial type testing                   MDRT
156 187 FprEN 13036-4                      Road and airfield surface characteristics - Test methods - Part 4: Method for       MDRT
                                           measurement of slip/skid resistance of a surface: The pendulum test

157 187 prEN 13108-9                       Bituminous mixtures - Material specifications - Part 9: Bituminous mixture for      MDRT
                                           Ultra-thin layer Asphalt Concrete (UTLAC)
158 187 FprEN 13286-47                     Unbound and hydraulically bound mixtures - Part 47: Test method for the             MDRT
                                           determination of California bearing ratio, immediate bearing index and linear
                                           swelling
159 240 EN 13032-1:2004/FprA1              Light and lighting - Measurement and presentation of photometric data of            MDRT
                                           lamps and luminaires - Part 1: Measurement and file format
160 240 prEN 16237                         Classification of non-electrical sources of incoherent optical radiation            MDRT
161 258 FprEN ISO 12677                    Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused        MDRT
                                           cast-bead method (ISO/FDIS 12677:2011)
162 258 prEN ISO 14719                     Chemical analysis of refractory material glass and glazes - Determination of        MDRT
                                           Fe2+ and Fe3+ by the spectral photometric method with 1-10 phenantroline
                                           (ISO/DIS 14719:2010)
163 276 prEN ISO 3382-3                    Acoustics - Measurement of room acoustic parameters - Part 3: Open plan             MDRT
                                           spaces (ISO/DIS 3382-3:2009)
164 276 EN ISO 10140-1/prA2                Acoustics - Laboratory measurement of sound insulation of building elements -       MDRT
                                           Part 1: Application rules for specific products
165 276 EN ISO 10140-5/prA1                Acoustics - Laboratory measurement of sound insulation of building elements -       MDRT
                                           Part 5: Requirements for test facilities and equipment
166 276 prEN ISO 12999-1                   Determination and application of measurement uncertainties in building              MDRT
                                           acoustics - Part 1: Sound insulation
167 276 prEN 16205                         Laboratory measurement of walking noise on floors                                   MDRT
168 276 prEN ISO 16251-1                   Acoustics - Laboratory measurement of the reduction of transmitted impact           MDRT
                                           noise by floor coverings on a reduced size standard floor - Part 1:
                                           Heavyweight floor
169 281 prEN ISO 9972                      Thermal performance of buildings - Determination of air permeability of             MDRT
                                           buildings - Fan pressurization method
170 281 EN ISO 15927-5:2004/prA1           Hygrothermal performance of buildings - Calculation and presentation of             MDRT
                                           climatic data - Part 5: Data for design heat load for space heating
171 281 prEN 16012                         Thermal insulation for buildings - Reflective insulation products -                 MDRT
                                           Determination of the declared thermal performance
172 302 prEN ISO 9488 rev                  Solar energy - Vocabulary                                                           MDRT
173 302 prEN ISO 10121-1                   Test method for assessing the performance of gas-phase air cleaning media           MDRT
                                           and devices for general ventilation - Part 1: Gas-phase air cleaning media

174 302 prEN ISO 10121-2                   Test methods for assessing the performance of gas-phase air cleaning media          MDRT
                                           and devices for general ventilation - Part 2: Gas phase air cleaning devices
                                           (GPACD) (ISO/DIS 10121-2:2011)
175 302 EN ISO 12499:2008/prA1             Industrial fans - Mechanical safety of fans - Guarding (ISO 12499:1999/DAM          MDRT
                                           1:2010)




                                                    Pagina 178 din 346
176 302 FprEN 12977-1                 Thermal solar systems and components - Custom built systems - Part 1:              MDRT
                                      General requirements for solar water heaters and combisystems
177 302 FprEN 12977-2                 Thermal solar systems and components - Custom built systems - Part 2: Test         MDRT
                                      methods for solar water heaters and combisystems
178 302 FprEN 12977-4                 Thermal solar systems and components - Custom built systems - Part 4:              MDRT
                                      Performance test methods for solar combistores
179 302 FprEN 12977-5                 Thermal solar systems and components - Custom built systems - Part 5:              MDRT
                                      Performance test methods for control equipment
180 302 FprEN 15726                   Ventilation for buildings - Air diffusion - Measurements in the occupied zone of   MDRT
                                      airconditioned/ventilated rooms to evaluate thermal and acoustic conditions

181 302 FprEN 15780                   Ventilation for buildings - Ductwork - Cleanliness of ventilation systems          MDRT
182 302 prEN 16211                    Ventilation for buildings - Measurement of air flows on site - methods             MDRT
183 302 prEN ISO 29461-1              Air intake filter systems for rotary machinery - Test methods - Part 1: Static     MDRT
                                      filter elements (ISO/DIS 29461-1:2010)
184 302 prEN ISO 29461-2