Simcon International (Private) Limited
Simcon Training Center - General Terms for Training Calendar 2007-2008
List of courses offered
Training calendar
Course-wise training calendar
Course outlines
General terms & conditions
General Terms & Conditions
Academia and students
Academia and students may contact either office of Simcon for discounted training sessions at their university campuses. However,
initially we are offering limited courses. For more details please contact us at cad@simcon-int.com OR isb@simcon-int.com.
Terms
General Pre-requisite
- Engineering Background (preferred, but not limited to, Mechanical Engineering);
- Familiarity with computers is essential;
Academia Seat
- A limited seats may be reserved for academia at discounted fee;
Provision for Re-scheduling/canceling Course, change of trainer and venue
- Simcon reserves the right to re-schedule/cancel the course in case of insufficient registration;
- Simcon reserves the right to change the trainer/instructor or venue of any course;
- In case of holiday on specific training day the training schedule shall be assumed adjusted accordingly;
Course Fee and Payment
- Discount may be granted on case to case basis;
- Fee will be paid through bank draft / cheque prior to the commencement of course, so that training material could be made
available before commencement of course;
- Course fee will only be returned in case of cancellation of any course;
Training Pattern
- The courses comprise of theory sessions and hands-on training on software. The lectures are conducted through PowerPoint
presentations to impart maximum information in less time. Candidates are requested to go through relevant basic engineering
information;
- Authorized training material would be used throughout the course;
Confidentiality
- Customer acknowledges that training material and information marked confidential which may come into customer’s possession
is proprietary to Simcon and their principal. Customer will not disclose such material and information to any third party;
Customized and Trainings Other Than Simcon Training Calendar
- Either office of Simcon may be contacted (cad@simcon-int.com OR isb@simcon-int.com) for customized and/or customer on-site
trainings etc.
>
Simcon International (Private) Limited
Simcon Training Center - Professional Trainings Offered
>
ANSYS (ANSYS Inc. Standard Courses)
ANSYS-1 Introduction to ANSYS - Part I >
ANSYS-2 Introduction to ANSYS - Part II >
ANSYS-3 Basic Structural Nonlinearities >
ANSYS-4 Advanced Structural Nonlinearities >
ANSYS-5 Advanced Contact & Bold Pretention >
ANSYS-6 Dynamics >
ANSYS-7 Explicit Dynamics with ANSYS/LS-DYNA >
ANSYS-8 Heat Transfer >
ANSYS-9 Design Optimization >
ANSYS-10 Introduction to MEMS >
Fluent (ANSYS Inc. Standard Courses)
Fluent-1 Introduction to GAMBIT: Preprocessor >
Fluent-2 Introduction to FLUENT: Solver >
Solid Edge (Unigraphics Inc. Standard Courses)
SE-1 Solid Edge Fundamentals >
SE-2 Solid Edge Advanced >
SE-3 Mill Manufacturing Process (NX CAM Express) >
Unigraphics (Unigraphics Inc. Standard Courses)
UG-1 Practical Applications of Unigraphics NX >
UG-2 Design Applications using Unigraphics NX >
UG-3 Drafting Essentials >
UG-4 Advanced Assemblies >
UG-5 Mechanical Free Form Modeling >
UG-6 Mold Wizard Design Process >
UG-7 Sheet Metal Design >
UG-8 Mill Manufacturing Process using Unigraphics NX >
Simcon (customized courses)
SIM-1 Sheet Metal Simulation >
SIM-2 Mold Designing >
SIM-3 Sheet Metal Dies Design >
SIM-4 Jigs & Fixture Designing >
SIM-5 Rapid Prototyping Technologies >
SIM-6 Reverse Engineering Techniques (using Imageware) >
SIM-7 Machining (CAM) >
SIM-8 Product Development >
SIM-9 6 Sigma >
>
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
None 3-days Anyone who performs Finite Element Basic linear, static analysis in any discipline Attendees should be able to maneuver efficiently within
Analysis (FEA) of mechanical parts the ANSYS Graphical User Interface (GUI), build two
or fluids and has little or no ANSYS and three dimensional models, apply loads and obtain
experience solutions as well as effectively verify the results of an
analysis and display results
>
ANSYS-2: Introduction to ANSYS – Part II
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 2-days Intermediate ANSYS users who Advanced modeling and analysis Attendees should be able to apply the advanced
perform FEA on mechanical parts or techniques - using array parameters, modeling and analysis techniques supported by ANSYS
fluids coupling and constraint equations, element
coordinate systems and surface effect
elements. In addition, beam modeling, sub-
modeling, modal and bonded contact
analysis are covered along with creating
macro files
>
ANSYS 3: Basic Structural Nonlinearities
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Engineers who analyze structural This two-day course in Basic Structural Mechanical analysts should have a basic understanding
nonlinear phenomena such as large Nonlinearities will aid in modeling of how to analyze structures with geometric
deflection, plasticity or contact geometric, material and contact nonlinearities, implement large strain theory in a
nonlinearities and in obtaining converged nonlinear analysis, and analyze structures with plasticity
solutions with accurate results and contact nonlinearities
>
ANSYS 4: Advanced Structural Nonlinearities
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 3 3-days Engineers who have completed Element selection and the wide range of Attendees will learn the appropriate element
Prerequisite: Basic Structural constitutive models available in ANSYS. formulations to use, the input of nonlinear material
Nonlinearities course or have Rate-independent plasticity, parameters, and the applicability of the various
equivalent competency viscoplasticity/creep, and hyperelasticity constitutive models for engineering use
are some of the topics that will be
discussed. Geometric instability problems
and element birth and death will also be
covered
>
ANSYS 5: Advanced Contact & Bolt Pretension
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Engineers who analyze contact This two-day course in contact and bolt After completion, mechanical analysts should have a
&3 problems such as large deflection, pretension will aid in contact classifications, brief understanding of how to analyze contact, contact
plasticity or contact contact stiffness, friction, auto time- assembly, bolt pretension, and also handle the
stepping, surface-to-surface, node-to-node, divergence problem. The tips and tricks, which will be
and node-to-surface elements, and bolt provided, will help to analyze the contact problem easily.
pretension, and in obtaining converged
solutions with accurate results
>
ANSYS 6: Dynamics
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Engineers capable of analyzing the Focusing on modal, harmonic and transient Upon completion, analysts should be able to calculate
dynamic response of structures dynamic analysis natural frequencies and mode shapes of linear elastic
structures (modal analyses), analyze the response of
structures under the action of time-varying loads
(transient analyses) and analyze the response of
structures with loads varying sinusoidally (harmonic
response analyses). In addition to analyzing dynamic
response, attendees will become skilled in performing
analyses in the frequency domain spectrum and random
vibration analyses. Attendees will also learn how to do a
pre-stressed model analysis and reduce model sizes by
using matrix reduction.
>
ANSYS 7: Explicit Dynamics with ANSYS/LS-DYNA
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 3, 2-days ANSYS/LS-DYNA is a two-day Directed toward explicit dynamic analyses Attendees with prior modeling and nonlinear skills should
5&6 course beneficial to engineers who be able to distinguish problems that should be solved
analyze problems involving contact, explicitly versus implicitly, identify and choose element
large deformations, nonlinear types, materials and commands used in explicit dynamic
materials, high frequency response analyses and perform all procedures for an explicit
phenomena or problems requiring dynamic analyses
explicit solutions
>
ANSYS 8: Heat Transfer
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Engineers who are responsible for Focusing on performing steady-state, Analysts should be able to analyze thermal responses of
analyzing the thermal response of transient, linear and nonlinear thermal structures involving conduction, convection, and
structures and components, such as analyses radiation and the response of structures exhibiting
internal combustion engines, rocket special heat transfer phenomena including thermal-
engines, pressure vessels, heat stress coupling and phase change
exchangers and furnaces, are
encouraged to take heat transfer
>
ANSYS 9: Design Optimization
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Recommended for analysts with a Two-day course directed toward improving After completing the course, attendees should be able to
working knowledge of ANSYS who engineered designs by optimizing weight, build a parametric analysis file that can be optimized,
are prepared to use advanced cost and performance produce a standard optimization run in ANSYS and use
software tools discrete design variables during optimization. In
addition, attendees will learn how to manage
optimization variables while executing an optimization
and perform an optimization in batch mode
>
ANSYS 10: Introduction to ANSYS for MEMS
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 3-days Designed for intermediate ANSYS Provides an overview of the ANSYS Upon completion, attendees should be able to perform
users who perform FEA for MEMS Multiphysics product including basic structural and thermal analysis of MEMS
structural and heat transfer analysis
concepts applicable to MEMS. Concepts
include static structural analysis, mode-
frequency analysis and steady-state heat
transfer. Learning process is assisted with
tutorials and step-by-step workshops
>
Fluent-1: Introduction to GAMBIT: Preprocessor
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
None 2-days Recommended for anyone who Geometry creation, meshing strategies By the end of this course, attendees should be able to
performs Computational Fluid create 2D and 3D geometries, mesh 2D and 3D
Dynamics (CFD) and has no Fluent geometries using the structured and unstructured grid
experience approach, examine the quality of the mesh
>
Fluent-2: Introduction to FLUENT: Solver
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Basic 2-days Recommended for anyone who Solver settings and fluid flow analysis By the end of this course, attendees should be able to
Gambit performs Computational Fluid select appropriate physical models, define material
Dynamics (CFD) and has little or no properties, prescribe boundary and operating conditions,
Fluent experience set solver controls, set up solution convergence
monitors, provide an initial solution, display and examine
results
>
SE-1: Solid Edge Fundamentals
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
None 5-days - This course is designed to launch students This course covers Drawing 2-D profiles and sketches,
on the path of productivity and to meet the Constructing and editing 3-D part models, Constructing
students’ expectation to transfer classroom and editing 3-D sheet metal models, Building and editing
instruction to productivity on the job. The assemblies, Creating and editing detail drawings of 3-D
course ignites the student through parts and assemblies and Managing data
professional instruction pertaining to
product model design, product model
detailing and assembly modeling.
>
SE-2: Solid Edge Advanced
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 4-days - - This course covers advanced assemblies, surfacing and
mold tooling.
>
SE-3: Mill Manufacturing Process (NX CAM Express)
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 5-days - - The Mill Manufacturing Process (MMP) course teaches
the use of the NX Manufacturing application for creating
2-1/2 and 3 axis tool paths. After successfully completing
this course the student will be able to create parent
group objects that supply information to operations,
utilize options and parameters that are common to
various operation types, create drilling, planar milling
and contour operations and subsequent tool paths.
>
UG-1: Practical Applications of Unigraphics NX (Basic parametric modeling, drafting, and assemblies)
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
None 5-days Engineers, designers, CAD/CAM - Practical applications of Unigraphics NX, as the initial
managers, drafters, checkers, class, are designed to launch students on the path of
machinists productivity. This course is designed to meet the
student’s expectation to transfer classroom instruction to
productivity on the job. The PAU NX course ignites the
student through professional instruction pertaining to
product model design, product model detailing,
assembly modeling and the basics of the master model
concept. At the completion of PAU NX the student will
productively develop solid models, detail drawings, and
product assemblies. The class introduces assembly
modeling in the context of a real-life scenario that
includes parts modeled by the student as well as part
models that have already been created. This reinforces
the student’s understanding of the flexibility of the solid
modeling and assembly tool as it can be applied in the
real world of product development collaboration.
>
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
UG-2: Design Applications using Unigraphics NX (Intermediate parametric modeling and assemblies)
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 4-days Designers, engineers, and - It is designed to thrust the student further up the
CAD/CAM managers productivity curve. As a second tier course DAU NX
builds on the tools the student has deployed as a result
of attending the Practical Applications of Unigraphics NX
(PAU NX) course. This method-based course focuses
the student on productive modeling techniques that
capture design intent in the context of the Master Model.
Delivering on that outcome, DAU NX will incorporate
sketching, inter-part modeling, expression associativity,
and mating conditions as a significant part of the
instruction.
>
UG-3: Drafting Essentials (Drafting of 3D models)
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 4-days Drafters, designers, engineers, mold Unigraphics NX Drafting Essentials is designed to teach
makers, manufacturing engineers. students the proper use of Unigraphics NX drafting tools.
Productivity is a key in every aspect of the Unigraphics
NX software implementation. Included in numerous
implementation processes is the requirement to produce
high-quality detail drawings that capture and convey
design intent graphically “on paper”. Students that
complete the Drafting Essentials course will be prepared
to return to their product development duties with the
additional skills that speed and automate the detailing
process in Unigraphics NX. This course develops a
working understanding of the interdependent nature of
modeling drafting, and assembly drafting.
>
UG-4: Advanced Assemblies (Designing parts in free form)
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 2-days Designers, supervisors, drafters, - Unigraphics NX Advanced Assemblies increases
system managers, illustrators and productivity dramatically by teaching the techniques
engineers. required to reduce time in opening and manipulating
large assemblies. Further productivity enhancements
are realized by using simplified representations and by
opening only designated portions of the assembly. Make
your job more productive and efficient — if you make or
use large assemblies you are encouraged to attend!
>
UG-5: Mechanical Free Form Modeling
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 5-days Designers and engineers. - The Unigraphics NX Mechanical Free Form Modeling
(MFF) course provides the tools you need to create and
update solid product models based on free form
designs. As a second tier course, MFF provides value by
focusing on reliable modeling techniques to drive
associative, updateable solid models.
>
UG-6: Mold Wizard Design Process
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 5-days Mold designers, toolmakers or - Unigraphics Mold Wizard Design Process will focus
anyone who designs plastic injection experienced Unigraphics users on compelling solutions
molds ( Students should have basic that dramatically reduce lead-time via Mold Wizard
working knowledge of injection mold automation, increasing their productivity. Students
design and construction) produce several associative two-part molds from suitably
prepared Unigraphics solid models. The curriculum flows
comfortably through familiar tasks used in mold
construction. Each new skill is reinforced by ample
opportunity to practice. Additionally, students gain a high
level view of underlying Unigraphics functionality.
Unigraphics Mold Wizard Design Process is the impetus
needed to thrust mold designers into a successful
competitive position.
>
UG-7: Sheet Metal Design (Designing manufacturable sheet metal parts)
Simcon International (Private) Limited
Simcon Training Center - Courses Details
ANSYS-1: Introduction to ANSYS – Part I
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 2 3-days All who have a need to design, - Unigraphics NX Sheet Metal Design will take your
inspect and/or manufacture sheet current modeling experience to the next level with the
metal parts. design of sheet metal parts. This course will help in the
design of manufacturable sheet metal parts by
emphasizing proper modeling techniques. This course
will cover a broad range of sheet metal features as well
as interoperability between other common modeling
features and functions to aid in the design and
preparation of your parts for manufacturing. Lessons
and activities show Unigraphics NX sheet metal
features, and sheet metal design capabilities. Individual
lessons explain functionality and provide user exercises
for each type of sheet metal feature as well as part in
process and flat pattern creation techniques.
>
Standard
Pre –
Course Recommended Audience Focus Competencies Expected After Course
requisite
Duration
Course 1 5-days Manufacturing Engineers, Process - The Mill Manufacturing Process (MMP) course teaches
Planners and NC/CNC programmers the use of the NX Manufacturing application for creating
who have basic knowledge of 2-1/2 and 3 axis tool paths. After successfully completing
NC/CNC manual programming of 3- this course the student will be able to create parent
axis positioning and contouring group objects that supply information to operations,
equipment. utilize options and parameters that are common to
various operation types, create drilling, planar milling
and contour operations and subsequent tool paths.
>
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
Days Course
Month Timings Days Course Title Venue Instructor
(From~To) Code
03-05 3 ANSYS-1 Introduction to ANSYS - Part I Karachi Sajid Ali
0900 am ~
September
0500 pm
06-07 2 ANSYS-2 Introduction to ANSYS - Part II Karachi Sajid Ali
0900 am ~
October 29-01 4 SIM-1 Sheet Metal Simulation (using AutoForm) Karachi Waqar Mughal
0500 pm
0900 am ~
12-17 6 SIM-2 Mold Designing Karachi Shahan Nafees / Erum Khan
0500 pm
5-7 3 ANSYS-1 Introduction to ANSYS - Part I Islamabad Muddassar Sabir Mirza
8-9 2 ANSYS-2 Introduction to ANSYS - Part II Islamabad Muddassar Sabir Mirza
10-12 2 ANSYS-5 Advance Contact & Bolt Pretention Islamabad Muddassar Sabir Mirza
November 13-14 2 ANSYS-6 Dynamics Islamabad Muddassar Sabir Mirza
0900 am ~
0500 pm
15-16 2 ANSYS-7 Explicit Dynamics with ANSYS/LS-DYNA Islamabad Muddassar Sabir Mirza
17-20 3 ANSYS-8 Heat Transfer Islamabad Muddassar Sabir Mirza
21-24 4 SIM-1 Sheet Metal Simulation (using AutoForm) Lahore Waqar Mughal
26-29 4 SIM-1 Sheet Metal Simulation (using AutoForm) Islamabad Waqar Mughal
ANSYS-1 Introduction to ANSYS - Part I Karachi Sajid Ali
ANSYS-2 Introduction to ANSYS - Part II Karachi Sajid Ali
NED University specific
December 14
winter vacation program
UG-1 Practical Application of Unigraphics NX Karachi Rabia Riaz
SE-1 Solid Edge Fundamentals Karachi Rabia Riaz
7-9 3 Fluent-1 Introduction to GAMBIT: Preprocessor Islamabad YTF*
0900 am ~
January 10-12 3 Fluent-2 Introduction to FLUENT: Solver Islamabad YTF*
0500 pm
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
Days Course
Month Timings Days Course Title Venue Instructor
January (From~To) 0900 am ~ Code
0500 pm
14-19 0900 am ~ 6 SIM-6 Reverse Engineering Techniques Karachi Erum Khan
September
0500 pm
6-8 3 ANSYS-1 Introduction to ANSYS - Part I Islamabad Muddassar Sabir Mirza
9-11 2 ANSYS-2 Introduction to ANSYS - Part II Islamabad Muddassar Sabir Mirza
0900 am ~
February 12-13 2 ANSYS-3 Basic Structural Nonlinearities Islamabad Muddassar Sabir Mirza
0500 pm
14-16 3 ANSYS-4 Advance Structural Nonlinearities Islamabad Muddassar Sabir Mirza
18-19 2 ANSYS-9 Design Optimization Islamabad Muddassar Sabir Mirza
0900 am ~
10-13 4 SIM-1 Sheet Metal Simulation (using AutoForm) Karachi Waqar Mughal
0500 pm
March 3-5 3 Fluent-1 Introduction to GAMBIT: Preprocessor Karachi YTF*
0900 am ~
0500 pm
6-8 3 Fluent-2 Introduction to FLUENT: Solver Karachi YTF*
7-10 4 SIM-1 Sheet Metal Simulation (using AutoForm) Islamabad Waqar Mughal
0900 am ~
April 7-11 5 SE-1 Solid Edge Fundamentals Karachi Rabia Riaz
0500 pm
14-18 5 UG-5 Mechanical Free Form Modeling Karachi Erum Khan
0900 am ~
12-17 6 SIM-2 Mold Designing Karachi Shahan Nafees / Erum Khan
0500 pm
2-5 3 ANSYS-1 Introduction to ANSYS - Part I Islamabad Muddassar Sabir Mirza
6-7 2 ANSYS-2 Introduction to ANSYS - Part II Islamabad Muddassar Sabir Mirza
8-9 2 ANSYS-3 Basic Structural Nonlinearities Islamabad Muddassar Sabir Mirza
10-13 3 ANSYS-4 Advance Structural Nonlinearities Islamabad Muddassar Sabir Mirza
May
0900 am ~
14-15 2 ANSYS-5 Advance Contact & Bolt Pretention Islamabad Muddassar Sabir Mirza
0500 pm
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
May Days Course
Month Timings Days Course Title Venue Instructor
(From~To) 0900 am ~ Code
0500 pm
16-17 0900 am ~ 2 ANSYS-6 Dynamics Islamabad Muddassar Sabir Mirza
September
0500 pm
19-20 2 ANSYS-7 Explicit Dynamics with ANSYS/LS-DYNA Islamabad Muddassar Sabir Mirza
21-23 3 ANSYS-8 Heat Transfer Islamabad Muddassar Sabir Mirza
24-26 2 ANSYS-10 Introduction to ANSYS for MEMS Islamabad Muddassar Sabir Mirza
9-13 5 UG-8 Mill Manufacturing Process using NX Karachi Shahan Nafees
0900 am ~
June 23-24 3 Fluent-1 Introduction to GAMBIT: Preprocessor Islamabad YTF*
0500 pm
25-26 3 Fluent-2 Introduction to FLUENT: Solver Islamabad YTF*
* Yet to finalize (YTF)
Academia and students
Academia
and
>
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
September 03-05 0900 am ~ 0500 pm 3 Karachi Sajid Ali
November 5-7 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
NED University specific winter
December 14** Karachi Sajid Ali
vacation package program
February 6-8 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
May 1-3 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
ANSYS-2: Introduction to ANSYS - Part II
Days
Month Timings Days Venue Instructor
(From~To)
September 06-07 0900 am ~ 0500 pm 2 Karachi Sajid Ali
November 8-9 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
NED University specific winter
December 14** Karachi Sajid Ali
vacation package program
February 9-11 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
May 5-6 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
ANSYS-3: Basic Structural Nonlinearities
Days
Month Timings Days Venue Instructor
(From~To)
February 12-13 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
May 7-8 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
ANSYS-4: Advance Structural Nonlinearities
Days
Month Timings Days Venue Instructor
(From~To)
February 14-16 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
May 9-12 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
ANSYS-5: Advance Contact & Bolt Pretention
Days
Month Timings Days Venue Instructor
(From~To)
November 10-12 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
May 13-14 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
ANSYS-6: Dynamics
Days
Month Timings Days Venue Instructor
(From~To)
November 13-14 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
May 15-16 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
ANSYS-7: Explicit Dynamics with ANSYS/LS-DYNA
Days
Month Timings Days Venue Instructor
(From~To)
November 15-16 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
May 17-19 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
ANSYS-8: Heat Transfer
Days
Month Timings Days Venue Instructor
(From~To)
November 17-20 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
May 20-22 0900 am ~ 0500 pm 3 Islamabad Muddassar Sabir Mirza
ANSYS-9: Design Optimization
Days
Month Timings Days Venue Instructor
(From~To)
February 18-19 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
ANSYS-10: Introduction to ANSYS for MEMS
Days
Month Timings Days Venue Instructor
(From~To)
May 23-24 0900 am ~ 0500 pm 2 Islamabad Muddassar Sabir Mirza
Fluent-1: Introduction to GAMBIT: Preprocessor
Days
Month Timings Days Venue Instructor
(From~To)
January 7-9 0900 am ~ 0500 pm 3 Islamabad YTF*
March 3-5 0900 am ~ 0500 pm 3 Karachi YTF*
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
June 23-24 0900 am ~ 0500 pm 3 Islamabad YTF*
Fluent-2: Introduction to Fluent: Solver
Days
Month Timings Days Venue Instructor
(From~To)
January 10-12 0900 am ~ 0500 pm 3 Islamabad YTF*
March 6-8 0900 am ~ 0500 pm 3 Karachi YTF*
June 25-26 0900 am ~ 0500 pm 3 Islamabad YTF*
SE-1: Solid Edge Fundamentals
Days
Month Timings Days Venue Instructor
(From~To)
NED University specific winter
December 14** Karachi Rabia Riaz
vacation package program
April 7-11 0900 am ~ 0500 pm 5 Karachi Rabia Riaz
UG-1: Practical Application of Unigraphics NX
Days
Month Timings Days Venue Instructor
(From~To)
NED University specific winter
December 14** Karachi Rabia Riaz
vacation package program
UG-5: Mechanical Free Form Modeling
Days
Month Timings Days Venue Instructor
(From~To)
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
April 14-18 0900 am ~ 0500 pm 5 Karachi Erum Khan
UG-8: Mill Manufacturing Process using NX
Days
Month Timings Days Venue Instructor
(From~To)
June 9-13 0900 am ~ 0500 pm 5 Karachi Shahan Nafees
SIM-1: Sheet Metal Simulation
Days
Month Timings Days Venue Instructor
(From~To)
October 29-01 0900 am ~ 0500 pm 4 Karachi Waqar Mughal
November 21-24 0900 am ~ 0500 pm 4 Lahore Waqar Mughal
November 26-29 0900 am ~ 0500 pm 4 Islamabad Waqar Mughal
March 10-13 0900 am ~ 0500 pm 5 Karachi Waqar Mughal
April 7-10 0900 am ~ 0500 pm 4 Islamabad Waqar Mughal
SIM-2: Mold Designing
Days
Month Timings Days Venue Instructor
(From~To)
November 12-17 0900 am ~ 0500 pm 6 Karachi Shahan Nafees / Erum Khan
May 12-17 0900 am ~ 0500 pm 6 Karachi Shahan Nafees / Erum Khan
Simcon International (Private) Limited
Simcon Training Center - Training Calendar 2007-2008
ANSYS-1: Introduction to ANSYS - Part 1
Days
Month Timings Days Venue Instructor
(From~To)
SIM-6: Reverse Engineering Techniques
Days
Month Timings Days Venue Instructor
(From~To)
January 14-19 0900 am ~ 0500 pm 6 Karachi Erum Khan
* Yet to finalize (YTF)