Get documents about "MANUAL000006304
Shared by: pengxiang
-
Stats
- views:
- 9
- posted:
- 11/10/2011
- language:
- Spanish
- pages:
- 4
Document Sample
Location of Controls Spanish Quick Use Guide/ Guía para rápida consulta Spanish Quick Use Guide/ Guía para rápida consulta Spanish Quick Use Guide/ Guía para rápida consulta Limited Warranty
• Limited Warranty • Customer Services Directory • Guía para rápida consulta (Spanish Quick Use Guide)
• Guía para rápida consulta (Spanish Quick Use Guide) • Location of Controls (Multi Function Display, Rear View of the VCR)
PANASONIC CONSUMER ELECTRONICS COMPANY, PANASONIC SALES COMPANY,
Multi Function Display CONEXIONES/CONFIGURACIÓN INICIAL (READY TO PLAY) OPERACIONES BÁSICAS PARA PROGRAMACIÓN FÁCIL PARA ANTES DE AL SERVICIO SOPORTE TÉCNICO DIVISION OF MATSUSHITA ELECTRIC DIVISION OF MATSUSHITA
LA REPRODUCCIÓN LA GRABACIÓN CON CORPORATION OF AMERICA ELECTRIC OF PUERTO RICO, INC.,
Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA. TEMPORIZADOR Verifique los siguientes puntos una y otra ves si esta teniendo problemas con su VCR. One Panasonic Way Ave. 65 de Infantería, Km. 9.5
Power Indicator Timer Indicator La videograbadora iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA. 1 Inserte una cassette, (BO : Haga referencia en la instruciones de funcionamiento [Operaciones Básicas]) Secaucus, New Jersey 07094 San Gabriel Industrial Park,
Lights up when power is on. Lights up when the VCR is set for a Timer • la alimentación del VCR se activa. 1 1) Presione PROG. visualizar la
Presione
2) para
(AO : Haga referecncia el la instruciones de funcionamiento [Operaciones Avanzadas])
Panasonic VHS VCR Products
Carolina, Puerto Rico 00985
Video Cassette Recorder
Recording, or when One Touch Recording CONEXIONES En la Pantalla de Visualización Multi
pantalla de Programación. ALIMENTACIÓN DE AC CORRECCIÓN
(OTR) is used.
Flashes when a Timer Recording is set, but a Para Ant/Cable ➛ VCR ➛ TV
Función se ilumina “VCR”.
2 Presione PLAY para reproducir el 2 1) grabación, presione de
Para ajustar la FECHA La unidad no enciende…. • Revise que el cordon de alimentación de AC este correctamente
conectado a la toma de pared.
Limited Warranty Coverage
Limited Warranty
If your product does not work properly because of a defect in materials or workmanship, Panasonic
Operating Instructions
tape has not been inserted into the VCR. cassette. para
1 Conecte el cable de la antena al
terminal IN FROM ANT del VCR.
Televisor
VCR Terminal IN FROM ANT.
• Si el cassette no tiene lengüeta de seleccionar: 1-31 = una vez, o
• Presione el botón “POWER” para el encendido de la unidad.
• Verifique que la fuente de alimantación está activada.
Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of
original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished
(Basic Operations)
1 Entrada (IN) desde prevención de grabación (p. 3), se inicia la PROG. L I STA
FECHA I N I C I O PARADA CA
DIARIO = a la misma
GRABACIÓN Y REPRODUCCIÓN CORRECCIÓN parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be For advanced operations, see the separate
2 Conecte el terminal OUT TO TV ANT./CABLE reproducción automáticamente. 7 SAB --:-- --:-- -- hora de lunes a viernes,
HOY (REC / PLAY) made by the warrantor. “Advanced Operations” instruction book.
VCR Indicator del VCR a la entrada de la antena Detalles especiales durante la grabación ELEGIR FECHA DE I N I C I O
SLP o SEMANA = a la
Terminal
misma hora cada Product or Part Name Parts Labor
Lights up when the VHF/UHF del TV con el cable RF OUT TO TV ELEGIR : FIJAR : No se pueden grabar programas de TV • Revise las conexiones entre VCR, antena externa o cable y TV.
2 Presione FF o REW para búsqueda de All components of VCR except
PV-V4022/PV-V4522
TERMINAR : PROG
VCR/TV selector is semana y presione • Verifique la selección de conexiones (BO p. 4, AO p. 3) One (1) Year Ninety (90) Days
set to VCR. incuido. VHF/UHF escenas hacia delante/ hacia atrás.
Presione PLAY para liberar.
para ajustar.
• Verifique que su sistema de antenna (Cable o TV) estén
correctamente seleccionados. Vea “Channels” (AO p. 12).
item listed below Models No.
Orden para elegir • Asegúrese que la pestaña en el cassette de grabación esté Video Tape (in exchange for Five (5) Days Not Applicable
Clock/ Status/ Channel/ Speed Display Para Sistema Digital de Satelite (DSS)/ Convertidor de cable ➛ VCR ➛ TV Luego de que la búsqueda se ha iniciado, Ejemplo 8 9 31 1 2 6 intacta (BO p. 3). defective video tape)
cada vez que presione FF o REW se • Compruebe que el reloj ha sido ajustado a la hora y fecha actual.
Displays the current time. Briefly displays VCR status 1 Conecte la salida de convertidor Televisor
Terminal
IN FROM ANT. Estuche convertidor cambia la velocidad como sigue: Fecha de hoy 7 / Orden para elegir DIARIO No se puede efectuar grabación con During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period,
VCR • Asegúrese de que la caja de Cable/DSS (si se utiliza) se there will be no charge for parts. You must mail-in your product during the warranty period.
when a function button is pressed. Hi-Fi Indicator de TV por cable
[SLP] aprox. 21X ↔ aprox. 9X SEMANAL SEMANAL SEMANAL temporizador…
(For Model PV-V4522 only)
de cable al terminal IN FROM (SAB) (LUN)
deja encendido y está sintonizado al canal a grabar. If non-rechargeable batteries are included, they are not warranted.
Briefly displays the channel number, or “L1” or “L2” [LP] aprox. 9X ↔ aprox. 7X
(DOM)
• Ajuste las horas de comienzo y deteción de grabación This warranty only applies to products purchased and serviced in the United States or Puerto Rico.
when a channel or line input is selected. Lights up when Hi-Fi audio is ANT. [SP] aprox. 7X ↔ aprox. 3X 2) Para los ajustes siguientes, correctamente. (BO p. 6)
Entrada (IN) desde This warranty is extended only to the original purchaser of a new product which was not sold “as is”.
• Asegúrese de que ha apagado el VCR antes de la grabación.
Briefly displays the recording speed when SPEED is monitored in Playback Mode. 2 Conecte el terminal OUT TO TV Terminal
1
ANT./CABLE Si la imágen se interrumpe con la velocidad de presione para seleccionar y
(BO p. 6) Mail-In Service
pressed. del VCR a la entrada de la antena OUT TO TV 21x, 9x o 7x, cambie la velocidad a 9x, 7x o 3x. presione para ajustar los tiempos • La grabación con temporizador quizás no pueda realizarse o For assistance in the continental U.S.A. in obtaining repairs please ship the product to:
Presione PAUSE/SLOW para imagen de INICIO/PARADA, CANAL, o continuarse si se produjera una interrupción de corriente antes Panasonic Services Company
VHF/UHF del TV con el cable RF VHF/UHF
2 entrada de LINEA, y velocidad del o durante una grabación con temporizador, incluso después de Customer Servicenter Suite B
Fija (Congelada). 4900 George McVay Drive
incluido. Presione PLAY para liberar. cassette (SP, LP, SLP). restablecido el fluido eléctrico.
McAllen, TX 78503
Presione PROG para finalizar el • Seleccióne el canal 3 o 4 en el televisor, de modo que
Presione PAUSE/SLOW en el modo No hay imagen de reproducción, o la corresponda con el canal de salida del videograbador (3 o 4) For assistance in Puerto Rico call Panasonic Sales Company
CONFIGURACIÓN INICIAL de Imagen fija para imágenes cuadro a programa. imagen de reproducción tiene ruidos (BO p. 4), o seleccione LINE. (787) 750-4300 or fax (787)768-2910
cuadro. Presione PLAY para liberar. o contiene rayas... • Ajuste el selector VCR/TV a “VCR”. When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original
Rear View of the VCR 1 Encienda el TV y cambie al canal 3. 3 Las fijaciones se realizan Mantenga pulsado PAUSE/SLOW en
3 Presione no está usando para
número que
para seleccionar un • Ajuste el control TRACKING en una de las dos direcciones. (BO p. 3)
• Pruebe a realizar la limpieza de cabezales. (BO p. 3)
carton. Include a letter detailing the complaint and provide a day time phone number where you can be
reached.
automáticamente. Cuando termina las el modo de imagen fija para imágenes ingresar mas programas y presione IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED
AC Power Plug
While plugged into an AC outlet, the
2 Enchufe el cable de CA. fijaciones, aparecerá la siguiente en cámara lenta. para ajustar. Luego repita el paso 2. En la reproducción de efectos
especiales, la imagen puede contener
• Ponga el Control de Bloqueo Vertical del televisor en
“MANUAL” y luego realice el ajuste.
TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
La videograbadora se encenderá e Presione PLAY para liberar. AMOUNT PAID AND PLACE OF PURCHASE.
VCR consumes 3.0 W (PV-V4522) Audio Input Connector pantalla. PROG. L I STA Presione nuevamente algunos saltos verticales cuando se CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
[2.5 W (PV-V4022)] of electrical (L/R)
iniciará las fijaciones de los canales y
del reloj.
VCR CLOCK CHANNEL 3 Presione STOP para detener el
FE I N I C
7 2 : 00 P
-- -- : --
-- -- : --
PARADA CA VEL
3 : 20 P 02 SLP
-- : --
-- : --
-- --
-- --
PROG para salir. utiliza un televisor con Control de PROOF OF PURCHASE.
power in off condition. 9 /29 / 2002 SUN 2 : 20PM cassette. -- -- : -- -- : -- -- --
Bloqueo Vertical Automático... Limited Warranty Limits And Exclusions
• Si no aparece la pantalla de abajo, DST : ON
SETT I NG : CH 10
Presione REW o FF en el modo de CANCELAR: ADD / DLT
ELEGIR : FIJAR : This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
compruebe la conexión del VCR-TV y parada para rebobinado/avance rápido
SAL I R : PROG No se puede controlar el VCR... • Asegúrese de que el aparato está encendido.
COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages
Video Input Connector VHF/UHF Antenna AUTO CLOCK SET • Revise las pilas del control remoto.
which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or
Input Terminal
si el canal del TV está a 3, intennte
cambiando al canal 4.
COMPLETED del cassette.
Presione EJECT en el control remoto, o
4 Presione POWER off para ajustar el
temporizador.
• Asegúrese de que el BLOQUEO DEL VCR esté ajustado a
INACTIVO (AO p. 10) failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration,
• Asegúrese de que no está funcionando una grabación con faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance,
• Para cambiar el canal de salida del STOP/EJECT en el VCR para expulsar (Se ilumina “TIMER” en el panel delantero) power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial
Si aparece en la pantalla “FIJACION temporizador.
VCR, consulte las instrucciones de el cassette. use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone
AUDIO IN FROM ANT. “Canal de salida del VCR” en la página AUTOMATICA DEL RELOJ ES CONTROL REMOTO CORRECCIÓN other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of
R
12 de las operaciones avanzadas. INCOMPLETO”, Ajuste el reloj como OPERACIONES BÁSICAS PARA REVISIÓN, REEMPLAZO O NO funciona el control remoto... • Asegúrese de que el aparato está encendido.
God.
L VHF/UHF se describe a continuación. LA GRABACIÓN BORRADO DE PROGRAMACIONES • Asegúrese de que el control remoto está en le modo de VCR. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
VIDEO OUT TO TV
VHF/UHF Antenna • Apunte el control remoto derectamente al sensor remoto del COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
(no se puede efectuar durante la grabación) DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
IN 1 OUT Output Terminal VCR CLOCK
AUTO CLOCK SET IS
CHANNEL
1 Inserte el cassette con lengüeta de a 1) Presione PROG.
VCR. (BO p. 7)
• Evite que ningún objeto interrumpa la señal del control remoto. OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone
INCOMPLETE protección de grabación (p. 3). • Revise las pilas del control remoto (BO p. 3) remove or re-install an installed unit if applicable, travel to and from the servicer, loss of or damage to
Rear View of Model • La alimentación del VCR se activa.
2) Presione para seleccionar la media or images, data or other recorded content. The items listed are not exclusive, but are for
Video Output Audio Output PLEASE SET CLOCK BY
linea.
• Asegúrese de que el BLOQUEO DEL VCR esté ajustado a
En la pantalla Multi Función se ilumina INACTIVO (AO p. 10) illustration only.)
PV-V4522 VCR only. Connector Connector (L/R) PRESSING ACTION KEY
“VCR”.
b PROG.
FE I N I C
L I STA
PARADA CA VEL
Presione para • Si ei sensor remoto recive directamente la lus del fluorescente o luz
solar puede causar interferencia con la señal del control remoto.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Table of Contents
2 Presione CH , o las teclas de
7 9 : 00 A 12 : 00 A 08
8 10 : 00 P 12 : 00 P 02
10 8 : 00 P 9 : 00 P 10
SP
SP
SP
seleccionar programa
deseado. Los botones “ACTION” y/o “PROG” • Verifique las conexiones entre VCR, cable o antena y TV. Note
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
Important Safeguards and Precautions .................... 2
Enchufe el cable de CA. números para seleccionar el canal. SU 9 : 00 P 10 : 00 P L1 LP
• Presione el botón VCR para el modo de “VCR”. (AO p. 2) limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
IN FROM ANT.
AJUSTE MANUAL DEL RELOJ CANCELAR: ADD / DLT
no responden...
AUDIO 3 Presione SPEED para seleccionar la ELEGIR :
SAL I R : PROG
FIJAR : • Revise las baterias del control remoto. (BO p. 3) This warranty gives you specific legal rights and you may also have other rights which vary from state to Before Using ............................................................ 3
state. If a problem with this product develops during or after the warranty period, you may contact your
Audio Input Audio Output Connections and Initial Setup (Ready to Play) ......... 4
c Para reemplazar programa...
VHF/UHF
VIDEO OUT TO TV Si la fijación ha sido incompleta. velocidad de grabación (p. 3) Varios CORRECCIÓN dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s
Connector Connector VCR CLOCK CHANNEL Cambie el idioma • SP = Reproducción estándar, Consumer Affairs Department at the addresses listed for the warrantor.
IN 1 OUT
luego de la fijación 1 Presione la tecla ACTION en el • LP = Larga duración,
PROG. L I STA
FECHA I N I C I O PARADA CA
1) Presione para No se pueden ver los programas en • Asegúrese que la TV este encendida.
• Asegúrese que la TV esté conectado a la salida de la VCR PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR Playback / Record on a Tape ................................... 5
inicial (para su 7 SAB 9:00A 12:00A 08 desplegar menu. el televisor...
Rear View of Model control remoto para visualizar la • SLP = Superlarga duración. HOY
SLP 2) Repita paso 2 (ver
(VCR Out). RESPONSIBILITY. Timer Recording ....................................................... 6
PV-V4022 VCR only. ayuda vea la pantalla del menú RELOJ. 4 Presione REC para comenzar a grabar. ELEGIR FECHA DE I N I C I O • Verifique conexiones entre VCR,cable o antena y TV.
CH AUTO SET PROCEEDING página 12 de las ELEGIR : FIJAR : arriba) para introducir • Ajuste el selector VCR/TV a “TV”. (BO p. 5) Location of Controls ............................................. 7, 8
• Para eliminar escenas indeseadas,
Customer Services Directory
TERMINAR : PROG
operaciones
VCR RELOJ CANAL el nuevo programa. • Asegúrese que la apropiada señal fue seleccionada.
CANCEL : STOP
presione PAUSE/SLOW para pausar, y al Spanish (Español) Quick Use Guide ............ 9, 10, 11
avanzadas.) 1/ / : presionar nuevamente se reanuda la Para cancelar programas…
VERANO : ACT No se puede introducir la cassette de • Inserte el cassette con el lado de la ventana hacia arriba y la Limited Warranty / Customer Services Directory .... 12
grabación. PROG. L I STA Presione ADD/DLT pestaña de grabación frente a usted.
Note to CABLE system installer: ELEGIR MES
FE I N I C PARADA CA VEL vídeo... • Verifique que no tenga ningún cassette dentro del aparato. For Product Information, Operating Assistance, Literature Request, Dealer Locations,
This reminder is provided to call the CABLE system installer’s
VCR CLOCK CHANNEL
ELEGIR : FIJAR :
5 Presione STOP para detener la -- -- : -- -- : --
8 10 : 00 P 12 : 00 P
10 8 : 00 P 9 : 00 P
SU 9 : 00 P 10 : 00 P
-- --
02 SP
10 SP
L1 LP No se puede extraer la cassette de • Inserte o conecte completamente el cable de alimentación de
and all Customer Service inquiries please contact:
attention to Article 820-40 of the NEC in USA (and to the AUTO CLOCK SET
SALIR : ACT I ON grabación. CANCELAR: ADD / DLT AC a la toma de pared. 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 9 am-7 pm, EST.
ELEGIR : FIJAR : vídeo... or send e-mail : consumerproducts@panasonic.com
Canadian Electrical Code in Canada) that provides guidelines Grabación de un toque.
2 Presione
SAL I R : PROG
PROCEEDING
para seleccionar el mes Presione REC repetidamente para ajustar La cassette de vídeo es expulsada al • Asegúrese que la pestaña de grabación del cassette este As an ENERGY STAR ® Partner,
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
y para ajustar. De la misma forma, la duración de la grabación como sigue: d Presione PROG Para terminar
programacion. dar comienzo a una grabación o al intacta. (BO p. 3) Web Site: http://www.panasonic.com
You can purchase parts, accessories or locate your
Matsushita Electric Corporation of America
CANCEL : STOP seleccione y ajuste la fecha, año, como sigue: 30 min. ➛ 1 hr ➛ 1:30hr ➛ desactivar la alimentación para la has determined that this product or product
building, as close to the point of cable entry as practical. 2:00 ➛ 3:00 ➛ 4:00 ➛ Salida. nearest servicenter by visiting our Web Site.
hora y DST (Hora de Verano). grabación con teporizador... model meets the ENERGY STAR ®
Si está usanndo un convertidor de TV por La VCR se apagara automáticamente en en guidelines for energy efficiency.
Accessory Purchases:
cable y en su area hay un canal de Public VCR RELOJ CANAL intervalo seleccionado de tiempo. PARA CANCELAR LA GRABACIÓN En el modo de Detención, el motor • Para activar rápidamente el mecanismo de reproducción, el
Broadcast Station (PBS), ajuste su (CILINDRO) sigue girando... cilindro sigue rotando durannte 3 minutos. Esto disminuye el 1-800-332-5368 (Customer Orders Only)
9 /29 / 2002 DOM 2 : 20PM Ver un canal y grabar otro. CON TEMPORIZADOR
Panasonic Consumer Electronics Company, tiempo de respuesta desde la parada hasta la reroducción o Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094 P convertidor al canal PBS de su area.
Si está usando un receptor DSS, este debe
estar apagado. F I JA R :
VERANO : ACT
FIJACION ES COMPLETO
I N I C I AR : ACT I ON
Presione VCR/TV.
(La indicación VCR se apagara en la
“visualización de Multi-Función”)
➛ Seleccione canales de TV (Mientras
(la grabación está teniendo lugar)
Presione POWER y luego STOP dentro
de los 10 segundos para cancelar la
hasta la el modo de búsqueda en rebobinado.
Si no puede resolver su problema, por favor comunicarse al Centro de
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)
(Visa, MasterCard, Discover Card, American Express, Check)
Service in Puerto Rico
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
Panasonic Sales Company (“PSC”), PRECAUCIÓN permanece grabando) grabación con temporizador (el indicador llamadas del Cliente para asistencia del producto al 1-800-211-PANA(7262).
Division of Matsushita Electric of Puerto Rico, Inc. Al usar cables coaxiales RF del tipo “tuerca”, Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: (Guía para rápida consulta en español está incluida.)
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park,
Printed in Indonesia apriételos solamente con los dedos. Un apriete 3 Presione dos veces la tecla ACTION Seleccione canales con VCR.
Presione VCR/TV (la indicación “VCR” se
TIMER se apagará en la Pantalla de Multi- Para localizar un centro de servicios autorizado, llame sin costo al Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
LSQT0507B excesivo puede dañar los terminales. para poner el RELOJ en marcha y Función) 1-800-211-PANA(7262) o envie un correo a : consumerproducts@panasonic.com Phone (787)750-4300 Fax (787)768-2910 LSQT0507B
Carolina, Puerto Rico 00985 S1001-1052 encenderá en la vizualización multi-función)
salir. ➛ Seleccione canales en su VCR. As of April 2002 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
-8- -9- - 10 - - 11 - - 12 -
Before Requesting Service Copying Your Tapes (Dubbing) Special VCR Features On-Screen Displays (OSD) Reset Language, Channels, Clock,VCR’s Output Channel
• Reset Language, Channels, Clock, VCR’s Output Channel • DST • On-Screen Displays (OSD)
• Special VCR Features • Copy Your Tapes (Dubbing) • Before Requesting Service
Check the following points once again if you are having trouble with your VCR. Connection Tape Position Display Feature Weak Signal Display ON/OFF Feature On-Screen Displays (OSD)
VCR CLOCK CHANNEL
REPEAT PLAY :OFF
Press ACTION
(BO : refers to “Basic Operations” Instruction book.) REMOTE WARNING :ON
AUTO SHUT- OFF :OFF to display MENU.
(AO : refers to “Advanced Operations” Instruction book.) (Rear connection shown.) To find out the present tape position. When set to “ON,” picture is displayed IDIOMA/LANGUE : ENGLISH
Tape position is displayed for VHS-C regardless of signal strength.
Function & Channel Displays Blank Tape/ VCR’ S OUTPUT CH :3
Power Correction VCR
Cassettes type, tapes under 30 minutes, and No Video Signal Indications SELECT :
VCR When a function button
Video Cassette Recorder
(HiFi) IN FROM ANT. TV CH 0 8 EXIT : ACT I ON
• Completely insert Power Plug into an AC outlet. some other tapes, but the position is not
No power…
• Set POWER button to on.
(HiFi)
OUT TO TV Front of VCR
VIDEO IN 2 L-AUDIO IN2-R
correct. 1 Press ACTION to display menu. is pressed, e.g. PLAY, or
you change channels,
When blank tape is detected during play,
or the current channel has no signal (with Language Channels Clock Time Zone
Recording & Playback
• Make sure power source is active.
Correction AUDIO OUT
R
R
L
R
R
L
(Front Audio L/R Video IN jacks are
also provided) 1 Press TAPE POSITION
VCR CLOCK CHANNEL
REPEAT PLAY
REMOTE WARNING :ON
AUTO SHUT- OFF
:OFF
:OFF
a 5 second display
appears.
Weak Signal Display feature (p. 10) set to
OFF), the TV screen will turn solid blue.
1) Press to select 1) Press to select 1) Press to select Adjust Operating Instructions
L
IDIOMA/LANGUE : ENGLISH language item. CHANNEL. CLOCK. (Only when Auto Clock
TV program cannot be recorded... • Check connections between VCR, external antenna, and
TV.
VIDEO OUT
AUDIO IN
VIDEO IN VHF/UHF
For Model PV-V4522 only to detect tape position. VCR’ S OUTPUT CH :3
SELECT :
VCR CLOCK CHANNEL
REPEAT PLAY :OFF
VCR CLOCK CHANNEL
ANTENNA : CABLE
VCR CLOCK CHANNEL
AUTO CLOCK SET
is set.) (Advanced Operations)
• “DETECTING TAPE
REMOTE WARNING :ON AUTO SET MANUAL 1) Press to select
• Check connections selection. (BO p. 4, AO p. 3)
DETECTING TAPE POSITION
EXIT : ACT I ON AUTO SHUT- OFF :OFF WEAK SIGNAL DISPLAY : OFF TIME ZONE ADJUST : 0 For Basic operations, see the separate
POSITION” only VCR Status & Clock Displays IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3 CLOCK.
• Make sure your antenna system (CABLE or TV) is appears the first time
“Basic Operations” instruction book.
2
VCR CLOCK CHANNEL
correctly set. (Channels [AO p. 12])
VCR CLOCK CHANNEL Press to select To display or remove Function Status Current Time SELECT : SET : SELECT : SELECT : AUTO CLOCK SET
VCR a cassette is inserted ANTENNA : CABLE
AUTO SET and display CHANNEL. overlay at right, Channel EXIT : ACT I ON EXIT : ACT I ON EXIT : ACT I ON MANUAL
• Make sure cassette record tab is intact. (BO p. 3) (Mono)
PV-V4022/PV-V4522
IN FROM ANT. TIME ZONE ADJUST : 0
VCR and it takes several WEAK SIGNAL DISPLAY : OFF
Press to select
Timer recording cannot be
performed…
• Confirm that clock is set to current time and date.
• Make sure Cable/DSS box (if used) is left on and tuned to
(Mono)
OUT TO TV
TV
Front of VCR
VIDEO IN 2 AUDIO IN 2 seconds for correct
indication to appear.
WEAK SIGNAL
DISPLAY, and press
➛ press DISPLAY*. Rec Time Remaining
(OTR mode only.
REC
0 : 25
STEREO
SAP
1 2 : 0 0AM CH 02
-0 : 1 2 : 3 4
SP
Counter
2) Press
VCR
repeatedly. 2) Press
CLOCK CHANNEL “ANTENNA,” then
to select 2) Press to select
“MANUAL,” and press SELECT :
Models No.
R
R SELECT :
EXIT : ACT I ON
SET :
See p. 5 of Basic MONO
REPEAT PLAY :OFF press to set . (For Auto Clock Set, EXIT : ACT I ON
channel to be recorded. L
(Front Audio/Video IN jacks are to set ON or OFF. REMOTE WARNING :ON
AUTO SHUT- OFF :OFF your antenna system select “AUTO CLOCK
• Set recording start/stop times correctly. (BO p. 6) AUDIO OUT also provided) • The present tape Operations book.) IDIOMA/LANGUE : ENGLISH 2) Press to select
position indication is
VCR’ S OUTPUT CH :3 (“TV” or “CABLE.”) SET.”)
• Make sure VCR POWER button is pressed off. (BO p. 6) VIDEO OUT • ON: Picture is displayed despite signal “TIME ZONE
For Model PV-V4022 only BEG I N END
displayed. Tape Speed SELECT : SET : VCR CLOCK CHANNEL VCR CLOCK CHANNEL ADJUST”
• Timer recording may not be performed or continued if a AUDIO IN VHF/UHF condition an may have poor quality. Broadcast Audio EXIT : ACT I ON ANTENNA : CABLE AUTO CLOCK SET
VIDEO IN AUTO SET MANUAL
power interruption occurs before or during a Timer OFF: Screen turns solid blue when signal Being Received (See p. 3 of Basic WEAK SIGNAL DISPLAY : OFF VCR CLOCK CHANNEL
Recording, even after power is restored. 2 Press TAPE POSITION is weak or non-existent. (For Model PV-V4522 only) Operations book.)
For English TIME ZONE ADJUST : 0 AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
• Select channel 3 or 4 on TV to match VCR output channel to return to normal screen. • Selecting ON has no effect on connected
VCR RELOJ CANAL
There is no playback picture, or the REPETICION :INACT
AVISO/CONT.REMOTO :ACT
SELECT : SET : SELECT : SET :
EXIT : ACT I ON EXIT : ACT I ON
playback picture is noisy or contains (3 or 4) (BO p. 4) or select LINE. Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR. equipment with blue back feature.
streaks... • Set VCR/TV selector to “VCR.” 1 To monitor the dubbing, also connect a TV as shown.
APAGADO AUTOMATICO :INACT
LANGUE/LANGUAGE:ESPAÑOL
CANAL DE SALIDA :3 3) Press to select (“TIME ZONE ADJUST”
SELECT :
EXIT : ACT I ON
SET :
Warning and Instruction Displays These displays will alert you to a missed
• Adjust TRACKING control in either direction. (BO p. 3) “AUTO SET,” then appears only when
• Try Head Cleaning. (BO p. 3) 2 PV-V4522 : Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Remote Warning ON/OFF Feature 3 Press ACTION to return to normal screen. operation or provide further instructions. ELEGIR
SAL I R
: FIJAR :
: ACT I ON press . auto clock is set.)
and press to
subtract or add
Special effects playback, picture may Recording VCR. For Spanish • If you use Cable VCR CLOCK CHANNEL hour(s) as necessary.
If Multi-brand feature is used (page 2), and this OSD Caution
contain some vertical jitter when using • Set TV’s Vertical Hold Control to MANUAL, then adjust. PV-V4022 : Connect AUDIO OUT jack on Playing VCR to AUDIO IN jack on Recording VCR. Page Box, set it to the 9 /29 / 2002 SUN 2 : --PM 3) Press ACTION.
feature is set to on, a warning appears MAGNETO. HORL. CANAL
PBS channel in your DST:ON
a TV with an Automatic Vertical Hold whenever an invalid key is pressed in TV mode. REPRISE LECTURE : NON
In place of a Playing VCR, you can use other equipment, such as a Camcorder. MESSAGE D’ ERREUR : OUI
time zone. SELECT HOUR • “TIME ZONE
Control... COUPURE AUTO : NON
Simply connect the unit’s Audio/Video outputs to the Recording VCR. VCR Lock Feature PLEASE SET CLOCK BY If you attempt to set or review a Timer See page 6 of LANGUAGE/IDIOMA : FRANÇAIS
CA SORTIE : 3 SELECT : SET : ADJUST” returns to
VCR cannot be controlled... • Make sure VCR power is on. 1 Press ACTION to display menu. When set to ON, all operations except for timer
PRESSING ACTION KEY Recording and the Clock is not set... Basic Operations
VCR CLOCK CHANNEL
EXIT : ACT I ON
“0” if clock is set
manually.
• Check Remote batteries. book SEL. : REGLER:
3) Press and
Playing (Source) VCR Recording (Editing) VCR record and tape eject are prohibited. Useful for
QUITTER : ACT I ON
•
•
Make sure VCR LOCK is set to off. (AO p. 10)
Make sure Timer Record is not in progress.
2 VCR Press
CLOCK CHANNEL
REPEAT PLAY
REMOTE WARNING
REMOTE WARNING :ON
:OFF
to select
households with small children. For French CH AUTO SET PROCEEDING
to select and set
the date, time, and
AUTO SHUT- OFF :OFF
1
CANCEL : STOP
IDIOMA/LANGUE : ENGLISH
and press to set ON 3) Press ACTION to exit. DST (Daylight
Remote Control Correction Insert pre-recorded tape. Insert blank tape with record tab. VCR’ S OUTPUT CH :3
To turn on, hold down Saving Time).
or OFF. REC on the VCR in Stop TURN VCR OFF After a Timer Program has been set... See page 6 of • After Channel Auto
VCR cannot be remote controlled... • Make sure VCR power is on. SELECT : SET :
VCR LOCK ACT I VATED Basic Operations Set is finished, Auto 4) Press ACTION to
EXIT : ACT I ON • If “OFF,” remote mode with no tape FOR TIMER RECORDING
• Make sure Remote is in VCR mode. book Clock Set will be start the Clock and
warning will not appear inserted for 7 sec.
• Aim Remote Control directly at remote sensor on VCR.
(BO p. 7)
2 Press INPUT* to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video
if invalid key is pressed. (Please ignore the NO performed. exit this mode.
CASSETTE warning.)
• Avoid any object blocking signal path. Input (Front). (See “Selecting the Input Mode”
• Check Remote batteries. (BO p. 3) below.)
3 Press ACTION to return to normal screen. To turn off, repeat above. If you press REC on the remote See page 3 of
• Make sure VCR LOCK is set to off. (AO p. 10) CHECK CASSETTE
VCR LOCK OFF
RECORD TAB control or VCR, and a cassette is Basic Operations
• Exposing VCR remote sensor to direct fluorescent or inserted with no record tab... book
outdoor light may cause signal interference.
ACTION and PROG buttons do not • Check connections between VCR, external antenna, and 3 Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.
Press REC, then PAUSE/SLOW
immediately to enter REC/PAUSE mode.
Auto Shut-Off Feature VCR’s Output Channel
respond... TV. Add or Delete a Channel
The power shuts off at a preset time. 1) Press to select
• Press VCR button for VCR mode. (AO p. 2) If you press PLAY, FF, REW, or REC
• Check Remote batteries. (BO p. 3) The operation of steps 4 and 5 must be done on both playing • VCR Lock cancels in 24 hours if clock is set. NO CASSETTE
on the remote control or VCR without
See page 5 of
Basic Operations
“VCR’S OUTPUT CH.” To add channel: Table of Contents
Miscellaneous Correction
and recording VCRs at the same time. 1 Press ACTION to display menu. a cassette inserted... book
VCR CLOCK CHANNEL
REPEAT PLAY
REMOTE WARNING :ON
AUTO SHUT- OFF
:OFF
:OFF
Select channel with NUMBER keys and
press ADD/DLT. Multi-Brand Control Feature ..................................... 2
Programs cannot be viewed on TV... • Make sure TV power is on.
• Make sure TV is set to output of VCR.
4 Press PLAY to start dubbing.
Playing VCR starts playback.
Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording. 2 VCR CLOCK CHANNEL
REPEAT PLAY
Press
:OFF
to select
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
Advanced Connections (Cable/DSS) ....................... 3
AUTO SHUT-OFF.
REMOTE WARNING :ON
SELECT : SET : CHANNEL 08 ADDED
• Check connections between VCR, external antenna, and AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
Press repeatedly to TO CANCEL TIMER REC If you press POWER or STOP during
EXIT : ACT I ON MTS Broadcast (For Model PV-V4522 only) .................. 4
TV. VCR’ S OUTPUT CH :3
See page 6 of
change shutoff time as PRESS POWER THEN a Timer Recording... 2) Press . VHS Hi-Fi Stereo System (For Model PV-V4522 only) ... 5
• Set VCR/TV selector to “TV.” (BO p. 5) Basic Operations
• Make sure proper signal source is selected. 5 Press STOP to stop dubbing. Press STOP to stop dubbing.
SELECT :
EXIT : ACT I ON
SET :
shown below. STOP KEY (visible in VCR mode only) book VCR CLOCK CHANNEL
Tape Operation .................................................... 6, 7
IF YOU PRESS ACTION
Video cassette cannot be inserted... • Insert the cassette with window side up; record tab facing KEY, VCR ’ S OUTPUT CH To delete channel:
you.
REC SWITCHES TO CH 4.
Select channel with CH / or NUMBER
Before Requesting Service ...................................... 8
OFF VIDEO HEADS MAY
• Check if a tape is already in the unit. To Monitor Dubbing on Your TV Selecting the Input Mode NEED CLEANING keys and press ADD/DLT. Copying Your Tapes (Dubbing) ................................ 9
PLEASE INSERT HEAD If head cleaning becomes necessary See page 3 of
Video cassette cannot be removed... • Completely insert Power Plug into an AC outlet. 1 Turn your TV on and tune to the Method 1: CLEANING CASSETTE Basic Operations Special VCR Features ............................................ 10
Video cassette ejects when a • Make sure cassette record tab is intact. (BO p. 3) Recording VCR channel (CH3 or CH4).
2 Hours while playing back a tape... book
3) Press ACTION. CHANNEL 08 DELE TED
recording is started or the power is
Press INPUT repeatedly. OR REFER TO MANUAL VCR CLOCK CHANNEL On-Screen Displays (OSD) .................................... 11
2 Set the VCR/ TV Selector on the Channel Number ↔ LINE1 ↔ LINE2
turned off for timer recording...
Recording VCR to “VCR.” 4 Hours END :PLAY
PLEASE TUNE YOUR TV TO
CH 4. Reset Language, Channels, Clock, VCR’s Output Channel ... 12
Method 2:
In Stop mode, the motor (CYLINDER) • To enable Quick play mechanism, the cylinder will rotate
Press CH / .
continues to rotate... for about 3 minutes. This reduces response time from If you press a function button other
Stop to Play mode and from Play to Rewind Search
Display will change as below. 6 Hours VCR LOCK ACTIVATED
than STOP/EJECT or POWER while See page 10
mode. Note • Dubbing tapes protected with Copy the VCR is in VCR Lock mode... After 3 seconds
Guard will have poor quality results.
1 2 3 As an ENERGY STAR ® Partner,
VCR CLOCK CHANNEL
Matsushita Electric Corporation of America
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262). LINE2
(CABLE) (TV)
LINE1 125 or 69
3 Press ACTION to return to normal screen. REPEAT PLAY
REMOTE WARNING :ON
AUTO SHUT- OFF
:OFF
:OFF
DST (Daylight Saving Time)
has determined that this product or product
IDIOMA/LANGUE : ENGLISH
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). VCR’ S OUTPUT CH :4 VCR auto adjusts clock for DST. model meets the ENERGY STAR ®
• “L1” or “L2” lights on Multi-Function Display Note • The shut-off countdown will not REMOTE CONTROL IS SET If you press an invalid key on the Spring (First Sunday in April) guidelines for energy efficiency.
or send e-mail to : consumerproducts@panasonic.com TO TV MODE SELECT : SET :
(about 4 sec.) when LINE1 or LINE2 is function during Play or Record. remote while in TV mode... See pages 2, 10 EXIT : ACT I ON
DST:ON ➛ Sets clock ahead one hour.
selected. Autumn (Last Sunday in October)
Panasonic Consumer Electronics Company, USE VCR : VCR KEY • To Make Corrections,
• LINE1: For rear audio/video connection. DST:ON ➛ Turns clock back one hour.
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
P
Printed in Indonesia
Caution : Unauthorized exchanging and/or copying of copyrighted recordings may be
LINE2: For front audio/video connection. *Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again. *Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
repeat steps 1) ~ 3).
• If your area does not observe Daylight
Saving Time, select DST:OFF.
• Keep these time changes in mind when
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
copyright infringement. programming VCR for timer recordings. LSQT0523B
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, LSQT0523B
Carolina, Puerto Rico 00985 S1001-1052 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
-8- -9- - 10 - - 11 - - 12 -
Multi-Brand Control Feature Advanced Connections MTS Broadcast VHS Hi-Fi Stereo System Tape Operation Tape Operation
• Advanced Connections • Multi-Brand Control Feature
• MTS Broadcast • VHS Hi-Fi Stereo System
• Tape Operation
Multi-Brand Control Setup Audio/Video connection For Model PV-V4522 only For Model PV-V4522 only Search System Repeat Play Commercial Skip
For each recording, an invisible index mark is placed on the tape. A program index and Set to playback a recording over and over. VCR fast forwards (skips) over 1~3 minutes
The Remote Control can be set to control some TV functions. If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR Connection information are also included for timer recordings. These marks are used to access or of recorded tape.
to them to receive higher quality picture and sound. Audio Mode for Recording
1 Find your TV Brand Code Number from those shown below. scan recordings. 1 Press ACTION to display menu.
Make the Audio/Video Connection as shown on page 3. 1 Press CM/ZERO in Play mode.
2 Setup for TV control, • You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
1 Press SAP/ Hi-Fi to display audio mode. Index Search Program End Search
VCR
IN FROM ANT.
2 VCR CLOCK CHANNEL
REPEAT PLAY
REMOTE WARNING :ON
:OFF
Press
to select REPEAT PLAY
• Press CM/ZERO repeatedly to change
skip time as shown below.
➛ hold down TV button, (Display disappears after 5 seconds.) Locates end point of recording for continuity. AUTO SHUT- OFF :OFF
➛ enter code with NUMBER keys. AUDIO OUT
TV
TV 1 INDEX
SEARCH
PROGRAM END
Press SEARCH* to
display SEARCH in Stop
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
and press to set ON
or OFF.
R
R
L AUDIO IN
R 2 Press SAP/ Hi-Fi repeatedly
ENTER INDEX NUMBER :1
USING 1- 9 KEYS or Play mode, and then 1 Press SEARCH twice to display SEARCH SELECT : SET :
ON : Play repeats at
3 Confirm code entry, OUT TO TV L VHF/UHF
VCR
STEREO to select desired mode. FORWARD SEARCH :FF
REVERSE SEARCH :REW
press NUMBER keys to in Stop or Play mode.
EXIT : ACT I ON
tape end or if
➛ press POWER to turn your TV on or off. R SAP NEXT :SEARCH select recording unrecorded portion PLAY
VIDEO OUT L
MONO • Refer to “Receivable EXIT :STOP
• See table below for controllable functions in each mode. For Model PV-V4522 only Broadcast Types” on page 4.
number.
2 INDEX
SEARCH
PROGRAM END
Press FF on the remote
to start PROGRAM
over 30 sec. is
detected.
VIDEO IN
Stereo Amplifier • To calculate number, 1st Press 1 min Skip
AUDIO OUT see below. END SEARCH.
Notes • Repeat setup after remote battery replacement.
• Remote will not control every TV made by the manufacturer listed. If you get no
R
R
L
• Arrow indicates selection.
Press FF or REW on
SEARCH START :FF
• To cancel, press
PLAY or STOP.
3 Press ACTION to return to normal screen. 2nd Press 2 min Skip
response, your particular unit cannot be controlled. There are NO additional codes for the remote to start EXIT :SEARCH
the products listed. If your product is not listed, then the remote is not compatible with VHF/UHF AUDIO IN search.
R 3rd Press 3 min Skip
that product.
IN FROM ANT. L 3 Do a recording. 2 INDEX SEARCH Play begins at search Examples of Program End Search.
VCR OUT TO TV See p. 5 of “Basic Operations” Instruction book. end. To search forward Zero Search
TV or back 1 index, press Fig. 1
FF or REW on the • No indication appears.
AUDIO OUT To quickly return to a specified tape location.
INDEX
R Program 1 Program 2 or BLANK
FORWARD SEARCH :FF remote or VCR while
Using Multi-Brand Control OUT TO TV
AUDIO IN VHF/UHF
REVERSE SEARCH :REW
screen left is displayed the current tape position
After remote is set up, you can select VCR or TV for the desired function.
(10 sec.).
Press SEARCH button
FF End Point 1 Press DISPLAY during play
VIDEO OUT to display Counter.
For Model PV-V4022 only • To cancel, press
Press VCR or TV on the remote. Receivable Broadcast Types Audio Mode for Playback PLAY or STOP. Fig. 2
(Table below shows available unit buttons for each mode.) VIDEO IN
2 PLAY 1 2 : 0 0AM
0 : 00 : 00
SP
Press RESET
COUNTER at desired
INDEX
The following are possible audio broadcast types and on-screen displays.
INDEX
Program 1 BLANK Program 2 BLANK
position to reset to
Mode
Unit
VCR TV The signal being received is indicated with an “ ” mark while the selected audio mode is 1 Start playback. the current tape position
Press SEARCH button
“0:00:00”.
indicated with an arrow. See p. 5 of “Basic Operations” Instruction book. FF End Point
VCR All VOL UP/DOWN
To display the broadcast signal being received, To Calculate Index Number
2 Press SAP/ Hi-Fi to display audio mode. Fig. 3
TV
VCR/TV, PLAY, STOP, EJECT, SAP/Hi-Fi (PV-V4522
only), DISPLAY, FF, REW, PAUSE/SLOW, REC,
SPEED, CM/ZERO, RESET COUNTER, TAPE POSITION
POWER, INPUT, ENTER,
NUMBER keys, CH UP/DOWN,
VOL UP/DOWN
1 Connect the VCR’s VIDEO OUT jack to the TV’s VIDEO IN jack. ➛ press DISPLAY*.
(Display disappears after 5 seconds.)
Example 1:
the current tape position
Press SEARCH button
3 Continue to record, playback, etc.
INDEX
To go to rec. 2 from rec. 4, enter 3 and press Program 1 BLANK Program 2
PV-V4522 : Connect VCR’s L/R AUDIO OUT jacks to the TV’s L/R MTS Stereo and SAP broadcast
3 Press SAP/ Hi-Fi repeatedly
REW. If search 4 Press STOP.
Notes 2 AUDIO IN jacks. Multi-channel Television Sound Stereo (main language)
and Secondary Audio Program (sub language)
STOP
STEREO
SAP
1 2 : 0 0AM CH 02
0 : 00 : 00
SP H I F I : L/R
HIFI : L
HIFI : R
to select desired mode. End Point
FF
exceeds a few
seconds in
BLANK area. 5 REW 1 2 : 3 0AM CH 02
0 : 30 : 30
Press CM/ZERO in Stop
• Not all functions listed may be controllable. PV-V4022 : Connect VCR’s AUDIO OUT jack to the TV’s AUDIO IN broadcasts are being received simultaneously. MONO NORMAL • Select “HIFI(L/R)” or 1 2 3 4 5 6 7 SP mode to start ZERO
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel Select STEREO or SAP audio mode. “HIFI(L)” or “HIFI(R)” to SEARCH.
jack. listen to stereo recordings in
selection. Upon locating end point, • Unit will go into FF or
stereo sound.
Example 2: ➛ search continues 7 sec. past end point, REW mode and stop at
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.” • Arrow indicates
selection.
Select “NORMAL” for
monaural sound. To go to rec. 6 from rec. 2, enter 4 and press
FF.
➛ tape rewinds to 10 sec. before end point,
➛ tape plays to end point and stops.
the last point the
Counter was set to
0:00:00.
TV Brand Code Numbers MTS Stereo broadcast STOP 1 2 : 0 0AM CH 02
0 : 00 : 00 STOP 1 2 : 3 1AM CH 02
Panasonic ....................... 01, 02 Sylvania ................................. 05 JVC ....................................... 11 Multi-channel Television Sound Stereo broadcast. STEREO SP Notes
0 : 00 : 00
SP
Quasar ............................ 01, 02 Sharp ............................... 06, 07 Hitachi ................................... 12 Select STEREO audio mode. SAP
MONO
RCA ...................................... 03 Sony ...................................... 08 Mitsubishi ........................ 07, 13 I With a Cable Box (VCR Cable Box) You Can You Cannot • If stereo broadcast is weak and display flickers, select
1 2 3 4 5 6 7 • If Program End Search is started very
GE ......................................... 03 Toshiba ................................. 09 Samsung ............................... 14 MONO audio mode for possibly better results. close to an index mark, that mark may be
Zenith .................................... 04 Sanyo .................................... 10 Gold Star ................... 15, 16, 17 TV • view any • record skipped over.
Magnavox .............................. 05 Fisher .................................... 10 ANT AUDIO IN FROM ANT. (including scrambled NOTE: indicates start points of each recording.
R IN OUT scrambled) channels. Notes • To cancel, press PLAY or STOP.
or R
L VHF/UHF
CABLE BOX L
AUDIO channel.
CATV • Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Important Notes VIDEO
OUT TO TV IN OUT VIDEO SAP broadcast STOP 1 2 : 0 0AM CH 02 Standard stereo tapes will playback in monaural sound.
• use VCR 0 : 00 : 00 Note
IN 1 OUT VHF/UHF Remote Secondary Audio Program (sub language) broadcast.
• Due to changes in infra-red commands used by manufacturers, some brands have several codes. Select SAP audio mode for the sub language.
STEREO SP • To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to
If your unit does not respond to the first code, please try the next one. Control to SAP
a stereo TV or an external stereo amp and speakers. (See page 4.) • If Index Search is started very close to an
VCR MONO
select index mark, that index mark may not be
• Some TV brands require you to turn on the power manually. channels • If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio. counted in the search.
without using • Hi-Fi and normal audio playback volume level may differ.
Multi-brand
control feature.
I Connect With Two Cable Boxes You Can You Cannot MONO broadcast STOP 1 2 : 0 0AM CH 02
Normal monaural sound broadcast. 0 : 00 : 00
VCR • record and • view channel
STEREO SP
SAP
view both other than MONO
CABLE BOX AUDIO IN FROM ANT.
the one
R scrambled and
unscrambled selected for
IN OUT L VHF/UHF any type of
VIDEO channels if
OUT TO TV additional recording.
IN 1 OUT TV equipment is
ANT added. This • do a Timer
A/B Switch IN OUT connection recording of ®
or 2-Way Splitter CABLE BOX R AUDIO
requires: two a channel Equipped with -TV Noise Reduction for true
®
CATV L converter unless you MTS reproduction. -TV Noise Reduction is
OUT 1 OUT 2 IN OUT IN 1 IN 2 VIDEO select it at required for good stereo separation and audio
boxes, an A/B
VHF/UHF the cable ®
switch, and a fidelity. is a registered trademark, and is *Important: If a remote control button does not work when pressed, *Important: If a remote control button does not work when pressed,
2-way splitter. box. licensed by ®
Technology Licensing. press the VCR button on the remote and try the button again. press the VCR button on the remote and try the button again.
-2- -3- -4- -5- -6- -7-
Before Using Connections / Initial Setup (Ready to Play) Playback / Record on a Tape Timer Recording Location of Controls
• Important Safeguards • Accessories • Head Cleaning • Loading Batteries • Prevent Tape Erasure • Specifications • Record/Playback Time
• Connections • Initial Setup • Clock Set • Select Channel • Playback • Record • Auto Operation
• Timer Recording • Location of Controls (Remote Control Buttons, Front View of the VCR)
Important Safeguards and Precautions Congratulations Please make all cable or antenna connections before plugging into the AC Playback a Tape Record on a Tape Timer Recording
Head Cleaning Remote Control Buttons
FOR YOUR SAFETY, READ AND RETAIN OUTDOOR ANTENNA INSTALLATION on your new purchase! With proper use, this outlet.
ALL SAFETY AND OPERATING
INSTRUCTIONS. HEED ALL WARNINGS IN
1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to the
dependable product will provide years of Old or damaged tapes may clog heads. Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set. 1 Insert a tape. 1 Insert a tape with a record tab (p. 3). 1 1) Press PROG*. VCR (mode) TV (mode)
equipment, be sure the antenna or cable system is grounded enjoyment. Please fill in the information below. Video Head Clog Sensor • Loose or peeling labels
THE MANUAL AND ON THE UNIT (Serial number is on tag on back of VCR.) Connecting 2) Press to display program screen. (Enables VCR functions) (Enables TV functions)
so as to provide some protection against built up static
charges and voltage surges.
Screen-right appears during may cause tape jam. 2 Press CH or NUMBER keys Example POWER
INSTALLATION
1 POWER SOURCE CAUTION
Section 810 of the National
Electrical Code, ANSI/NFPA
NEC - NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD IN
• Date of Purchase
play if clogging is detected.
To remove screen, press
V I DEO HEADS MAY
NEED CLEAN I NG For ANT./Cable ➛ VCR ➛ TV to select the channel. 2 TIMER PROG.
DATE START
LIST
STOP
1) Set record DATE,
CH
Today
POWER
(Turns VCR off/on) VCR TV
DISPLAY
DISPLAY
(Displays VCR status)
WIRE PLEASE I NSERT HEAD
• For “LINE” input, see p. 9 of “Advanced 13 SAT --:-- --:-- -- press to select:
Operate only from a power source indicated on
the unit or in this manual. If necessary, have
70 (in Canada, part 1 of the
Canadian Electrical Code)
GROUND
CLAMP
ANTENNA
• Dealer Purchased From PLAY. CLEAN I NG CASSETTE
OR REFER TO MANUAL
1 Connect cable from TV
VCR IN FROM ANT.
2 Press PLAY to play tape. Operations” book. TODAY
SLP 1~31= one time, VCR/TV
VCR/TV
1 2 3 NUMBER Keys
your Electric Utility Service Company or Video
DISCHARGE UNIT
(NEC SECTION 810-20)
• Dealer Address • Use “dry” type head • If tape has no rec. tab (p. 3), auto play begins. SELECT START DATE 8 9 31 1 2 6
Products Dealer verify the power source in your
provides information with
respect to proper grounding
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
cleaning cassette only.
END : PLAY
Antenna/Cable to VCR’s IN 1 IN from
• If recording from a channel over 100, first
press 100 key then the other 2 digits. SELECT : SET:
or DAILY= MON~ FRI, (For TV or VCR mode) INPUT (Selects channel directly)
home. • Dealer Phone No. or WEEKLY= same time SELECT / Selection Order DAILY
FROM ANT. jack. END : PROG
GROUND CLAMPS
of the mast and supporting (Part No. NV-TCL30PT is recommended.) ANT./CABLE 7 INPUT 4 5 6 ADD/DELETE
2 POLARIZED OR GROUNDING PLUG structure, grounding of the
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
• Model No. Special Features During Play each week and press .
3 Press SPEED
(NEC ART 250, PART H)
As a safety feature, this Video product comes lead-in wire to an antenna discharge unit, size • Follow cleaning tape instructions carefully. WEEKLY WEEKLY WEEKLY (For LINE or channel) SPEED (Adds or deletes a channel)
with either a polarized power cord plug (one of grounding conductors, location of antenna discharge unit, • Serial No. Excessive use of tape can shorten head life. 2 Connect VCR’s OUT TO TV OUT TO TV Forward/Reverse Scene Search to select record speed (p. 3). 2) Set remaining items, (SAT) (MON) (SUN) SPEED 7 8 9
blade is wider than the other), or a three-wire connection to grounding electrodes and requirements for the SEARCH/ ENTER
grounding type plug. grounding electrode. jack to TV’s ANT. IN jack 2 ➛ Press FF or REW. press to select and (Changes tape speed) EJECT ADD/DLT
(Set search system /Tunes TV channel)
POLARIZED PLUG CAUTION: 2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER Accessories with included RF Cable VHF/UHF ➛ Press PLAY to release. 4 Press REC press to set START/ STOP times, CH(channel) or 100 0
This plug will only fit into an outlet one way. If you LINES OR CIRCUITS Cleaning the VCR After search has begun, each additional EJECT CM/ZERO SEARCH PLAY (Plays a tape)/
LINE input (p. 9 of Advanced Operations book), and
cannot fully insert the plug, try reversing it. If it still An outside antenna system should be located well away
from power lines, electric light or power circuits and where it Remote Control Batteries 2 “AA” accessory. press of FF or REW changes speed as
to start recording.
tape speed (p. 3).
(Ejects tape)
PLAY FAST FORWARD/SEARCH
will not fit, have an electrician install the proper wall Use soft, dry cloth or dusting attachment of a • To edit, press PAUSE/SLOW to pause,
outlet. Do not defeat the safety feature by tampering will never come into contact with these power sources if it LSSQ0263 (PV-V4022) shown below. COMMERCIAL SKIP/ (Fast forwards tape/ forward visual
vacuum to remove dust from all cabinet vent and again to resume recording.
with the plug. should happen to fall. When installing an outside antenna,
extreme care should be taken to avoid touching power lines,
LSSQ0264 (PV-V4522) holes. You may moisten cloth with nonabrasive, For DSS/Cable Box ➛ VCR ➛ TV [SLP] : Approx. 21X ↔ Approx. 9X Press PROG to end programming. ZERO SEARCH
(Starts COMMERCIAL SKIP/ Zero Search)
REW
SELECT
FF search)
REWIND/SEARCH
GROUNDING PLUG CAUTION:
circuits or other power sources as this could be fatal. antistatic cleaner/ polisher. [LP] : Approx. 9X ↔ Approx. 7X
This plug will only fit into a three-hole grounding
outlet. If necessary, have an electrician install the
Because of the hazards involved, antenna installation should
POWER
VCR TV
DISPLAY
Caution:
1 Connect your cable box’s [SP] : Approx. 7X ↔ Approx. 3X 5 Press STOP to stop recording. 3 TIMER PROG.
DT START
L I ST
STOP CH SPD
To Enter More Programs ACTION STOP PROG (Rewinds tape/ reverse visual
be left to a professional.
VCR/TV
TV Press to select and ACTION search)
proper outlet. Do not defeat the safety feature by
USING THE VIDEO UNIT
INPUT
1
4
2
5
3
6
RF Coaxial Alcohol and various solvents could damage OUT jack to the VCR’s IN VCR IN FROM ANT. Cable TV
Converter Box If at 21X, 9X, or 7X speed the picture is
13 2 : 00 P 3 : 20P 02 SLP
-- -- : -- -- : --
-- -- : -- -- : --
-- --
-- -- (Displays menu) TAPE STOP (Stops tape)
tampering with the plug. press to set an unused program. RESET
3 POWER CORD If the unit has been in storage or moved to a new location, refer
SPEED
7 8 9
Cable finish. FROM ANT. jack with an RF interrupted, change speed to 9X, 7X, or 3X.
One Touch Recording
-- -- : -- -- : -- -- -- REC POSITION COUNTER PAUSE/SLOW
Then repeat step 2. RECORD
EJECT ADD/DLT
100 0 CANCEL : ADD / DLT Remote keys
Make sure power cords are routed so that they
are not likely to have anything rest on them, roll
first to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
CM/ZERO
PLAY
SEARCH
VJAS0196 cable. IN from Notes (record in progress) SELECT :
EXIT : PROG
SET :
Or, press PROG to exit. (Records a program, etc.) PLAY, STOP, REW, and FF
over them, or be in the way of walking traffic. MOISTURE OF ANY KIND. REW
SELECT
FF
ANT./CABLE Press REC repeatedly to set length as follows: function as
Specifications 2 Connect VCR’s OUT TO TV OUT TO TV
1 • Picture interruption may occur with some TVs. 30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00 TAPE POSITION
If an extension cord is used, make sure it also 2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
ACTION STOP PROG
• FF and REW search speed may vary operation keys when menus
➛ 4:00 ➛ exit. (Locates tape position)
TAPE
has either a polarized or grounded plug and that
RESET
STRONG IMPACT, unplug the unit and have it inspected by REC
jack to TV’s ANT. IN jack VOL CH
POSITION COUNTER PAUSE/SLOW
SAP/Hi-Fi
the cords can be securely connected. Frayed a qualified service technician before use. Power Source: 120 V AC, 60 Hz VHF/UHF 2 depending on current tape position. are displayed.
The VCR shuts off at the length set.
cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be
3 DURING AN ELECTRICAL STORM SAP/Hi-Fi VOL CH
Power Consumption: Power On with included RF Cable COUNTER RESET
(Resets counter to zero) TRACKING
During a lightning storm, whether indoors or outdoors, or TRACKING
Still (Freeze) Picture Record one station, watch another
replaced by a qualified service technician. before leaving the unit unused for extended periods of time, Approx. 18 W (PV-V4022) accessory. ➛ Press PAUSE/SLOW.
Overloaded outlets and extension cords are fire disconnect all equipment from the power source as well as Model PV-V4522 Approx. 23 W (PV-V4522) Press VCR/TV Review, Replace, or Clear Program Cancel a Timer Recording SAP/Hi-Fi PROGRAM
hazards and should be avoided. the antenna and cable system.
remote shown. Power Off ➛ Press PLAY to release. (“VCR” goes out on Multi Function Display), (For Model PV-V4522 only) (Displays Timer Program screen)
4 DO NOT BLOCK VENTILATION HOLES Approx. 2.5 W (PV-V4022) (Recording is not in progress) (Recording is in progress)
Ventilation openings in the cabinet release heat
4 WHEN THE UNIT IS PLUGGED IN
• Never expose the unit to rain or water. DO NOT Initial Setup (Ready to Play) ➛ select channels on TV (recording continues). (Selects audio mode for play
PAUSE/SLOW
Approx. 3.0 W (PV-V4522) Frame by Frame Picture or record)
generated during operation. If they are blocked,
heat build-up inside the unit can cause failures
OPERATE if liquid has been spilled into the unit. To order accessories, call toll free
Video Signal: EIA Standard NTSC color ➛ Press PAUSE/SLOW in Still mode. Select channels on VCR (in STOP or a 1) Press PROG. Press POWER and then STOP within 10 (Displays still, frame by frame,
that may result in a fire hazard or heat damage
to cassettes. For protection, follow these rules:
Immediately unplug the unit, and have it inspected by a
service technician. Fire and shock hazards can result from
1-800-332-5368. Video Recording 4 rotary heads helical 1 Turn TV on and tune to channel 3. 3 Settings are made automatically. ➛ Press PLAY to release. PAUSE mode) 2) Press to select LIST. seconds to cancel the Timer Recording. VOLUME +/-
or slow motion picture)
electrical shorts caused by liquid contact inside. System: scanning system When setup is done, this screen Press VCR/TV
a. Never cover ventilation slots or the unit while Loading the Batteries (Adjusts TV volume) CHANNEL /
in use, or operate the unit when placed on a
• Never drop or push any object through openings in the
unit. Some internal parts carry hazardous voltages and
Audio Track: 1 track (Normal)
2 channel
2 Plug VCR Power Cord into AC wall appears. Slow Motion Picture (“VCR” lights up on Multi Function Display),
b TIMER PROG. L I ST Press to select (The TIMER indicator goes out on Multi TRACKING/ V-LOCK
bed, sofa, rug, or other soft surface.
b. Avoid built-in installation, such as a book
contact can cause electric shock or fire hazard.
(Hi-Fi Audio Sound PV-V4522) outlet. VCR comes on and auto ➛ Hold down PAUSE/SLOW in Still mode. ➛ select channels on VCR. DT START
7
STOP CH SPD
9 : 00A 12 : 00A 08 SP desired program. Function Display.) (Selects channel/ reduces
VCR CLOCK CHANNEL picture noise during Play and
• Avoid placing the unit directly above or below your TV set
➛ Press PLAY to release.
8 10 : 00P 12 : 00P 02 SP
case or rack, unless proper ventilation is as this may cause electrical interference. Keep all Tuner: channel and clock set starts. 9 /29 / 2002 SUN 2 : 20PM 10
SU
8 : 00P 9 : 00P 10 SP
9 : 00P 10 : 00P L1 LP Slow mode)
provided. magnets away from electronic equipment. Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69 DST : ON
Notes
5 AVOID EXTREMELY HOT LOCATIONS OR • If screen below does not appear, check SETT I NG : CH 10 Notes CANCEL : ADD / DLT
5 USING ACCESSORIES CABLE Channels: Midband A ~ I (14 ~ 22) • Watching one channel and recording SELECT : SET :
SUDDEN TEMPERATURE CHANGES Use only accessories recommended by the manufacturer to VCR - TV connection and, if TV is EXIT : PROG
EJECT button: Press to eject tape. EJECT is not available during recording.
Do not place the unit over or near any kind of Superband J ~ W (23 ~ 36) AUTO CLOCK SET • These features work best in SP or SLP mode. another is not possible when using Cable
avoid risk of fire, shock, or other hazards. tuned to channel 3, try switching it to COMPLETED
heater or radiator, in direct sunlight, inside a
closed vehicle, etc.. Do not move the unit 6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically
Hyperband AA ~ EEE
(37 ~ 64) channel 4.
• The sound will be muted.
• To reduce picture noise, see “Manual
Box or DSS Receiver.
• After 5 minutes in Pause mode, VCR stops
c To Replace program...
suddenly between areas of extreme temperature
untreated cloth to gently remove dust or debris. DO NOT Lowband A-5 ~ A-1 (95 ~ 99) • To change VCR’s output channel, Tracking Control” on p. 3. to protect the tape and the video heads.
TIMER PROG. LIST 1) Press to display.
variation. If the unit is suddenly moved from a
USE cleaning fluids, aerosols, or forced air that could over- Special CABLE channel 5A If “AUTO CLOCK SET IS INCOMPLETE” DATE START STOP CH
cold place to a warm place, moisture may please refer to “VCR’s Output Channel” • After VCR is in Still or Slow mode 3 minutes, it 7 SUN 9:00A 12:00A 08 2) Repeat Step 2
condense in the unit and on the tape. spray, or seep into the unit and cause electrical shock. Any (01)
in Advanced Operations book (p. 12). appears, manually set clock. TODAY
substance such as wax, adhesive tape, etc. may mar the Ultraband 65 ~ 94, 100 ~ 125 auto switches to Stop mode to protect the tape SP (above) to set new
6 TO AVOID PERSONAL INJURY cabinet surface. Exposure to greasy, humid, or dusty areas See below. and the video heads. SELECT START DATE
Front View of the VCR
• Do not place unsecured may adversely affect internal parts. Operating SELECT : SET:
programs.
equipment on a sloping VCR CLOCK CHANNEL
Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F) END : PROG
surface. SERVICE
Operating Humidity: 10 % ~ 75 %
• Do not place this unit on any
support that is not firm, level,
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, Weight: 2.5 kg (6.0 lbs).
AUTO CLOCK SET IS
INCOMPLETE 3 Press STOP to stop tape. or Model PV-V4522 VCR shown.
PLEASE SET CLOCK BY
and adequately strong. The this Video product does not operate properly, do not attempt Dimensions: 360 (W) x 93 (H) x 242 (D) mm PRESSING ACTION KEY Press REW or FF in Stop mode to To Clear program...
unit could fall causing serious to open or remove covers, or make any adjustments not
injury to a child or adult and Battery replacement caution 14-3/16” (W) x 3-11/16” (H) x Rewind or Fast Forward tape. TIMER PROG. L I ST Press ADD/DLT.
described in the manual. Unplug the unit and contact a
damage to the unit. • Do not mix old and new batteries. 9-9/16” (D) inch DT START STOP CH SPD
Cassette Compartment
qualified service technician. Press EJECT on remote, -- -- : -- -- : -- -- -- STOP/EJECT
• An appliance and cart combination should be 2 IF REPLACEMENT PARTS ARE REQUIRED • Do not mix alkaline with manganese batteries. 8 10 : 00P 12 : 00P 02 SP
moved with care. Quick stops, excessive force, Note: Designs and specifications are subject or STOP/EJECT on VCR to eject tape. 10 8 : 00P 9 : 00P 10 SP
Make sure the service technician uses only parts specified SU 9 : 00P 10 : 00P L1 LP
and uneven surfaces may cause the appliance by the manufacturer, or those having the same safety to change without notice. Plugging the AC Power Plug into an AC outlet This video recorder, equipped with CANCEL : ADD / DLT
and cart combination to overturn.
• Carefully follow all operating instructions and
characteristics as the original parts. The use of unauthorized Prevent Accidental Tape Erasure Manual Clock Set HQ (High Quality) system, is
SELECT :
EXIT : PROG
SET :
POWER
substitutes may result in fire, electric shock, or other
use the manufacturer's recommended hazards. compatible with existing VHS
accessories when operating this unit or Break off the tab to To record again If Auto Clock Set was incomplete.
connecting it to any other equipment. 3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY
prevent recording.
Features for a Quality Picture VCR CLOCK CHANNEL equipment. Only use tapes with the d Press PROG to end the programming. PLAY
CHECK
After any service or repairs to the unit, request the service Digital Auto Picture 1 Press ACTION* on remote to display mark. Only tapes tested and
technician to conduct a thorough safety check as described Video
in the manufacture’s service literature to ensure that the Automatically controls the video output signal for CLOCK menu. inspected for use in 2, 4, 6, and 8
Input
Safety Precautions video unit is in safe operating condition. less noise depending on the tape condition.
Digital Auto Tracking
CH AUTO SET PROCEEDING VCR CLOCK CHANNEL
hour machines are recommended.
Connector
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or Continuously analyzes the signal and adjusts for
CANCEL : STOP
1/ / : Notes
moisture. DST:ON Auto Operation Functions Audio Input
Record Tab Cover the hole optimum picture quality. • If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must Connector CHANNEL / Remote RECORD REWIND/ FAST
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. with cellophane
SELECT MONTH
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas Manual Tracking Control
Auto Play be set to the Cable Box output channel and your Cable Box must be manually set to (L/R) TRACKING/ V-LOCK Sensor SEARCH FORWARD/
VCR CLOCK CHANNEL SELECT : SET :
tape.
exposer cet appareil à la pluie ou à une humidité excessive. Screw driver (to reduce picture noise) EXIT : ACT I ON Insert a tape ➛ Power comes on ➛ Play starts if there is no record tab (see p. 3). the desired channel. The Cable Box must be left on. SEARCH
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche Use during Playback and Slow Motion mode to AUTO CLOCK SET
dans la borne correspondante de la prise et pousser jusqu’au fond. Record/Playback Time reduce picture noise. PROCEEDING
2 Press to select the month and Auto Rewind
Play
• If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears
Press CH (TRACKING) / on the remote to set. In the same manner, select and
Fast Forward
➛ Tape end ➛ Rewind on-screen, please re-enter the timer programs.
This symbol warns the user that uninsulated Only use tapes with the mark in this unit. control or on the VCR until the picture clears up. set the date, year, time, and DST
CAUTION voltage within the unit may have sufficient CANCEL : STOP
(Daylight Saving Time). Play Auto Eject
RISK OF ELECTRIC SHOCK magnitude to cause electric shock. Therefore, To return to Auto Tracking, press POWER off,
DO NOT OPEN Type of Video Cassette then on again a few seconds later. (Repeat Play must be off)
it is dangerous to make any kind of contact Tape Speed If you use a cable box, turn it on and set it Important notes when using DSS receiver
Play ➛ Tape end ➛ Rewind ➛ Tape ejects if there is no record tab
VCR CLOCK CHANNEL
with any inside part of this unit. Setting T60 T120 T160 to the Public Broadcasting Station (PBS) 9 /29 / 2002 SUN 2 : 20PM • When recording programs via DSS receiver, DSS receiver must be left on.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, This symbol alerts the user that important SP channel in your time zone. If you use a
literature concerning the operation and 2 Hours DST:ON • When recording programs via an antenna or cable, DSS receiver must be turned off.
DO NOT REMOVE COVER (OR BACK) (Standard Play) 1 Hour 2 Hours 40 Minutes DSS receiver, it must be turned off.
NO USER-SERVICEABLE PARTS INSIDE maintenance of this unit has been included. R
R R
R
R R
SET COMPLETED
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Therefore, it should be read carefully in order 5 Hours
R
R
LP SET :
to avoid any problems. (Long Play) 2 Hours 4 Hours 20 Minutes START : ACT I ON *Important: If a remote control button does not work when pressed, *Important: If a remote control button does not work when pressed,
V-Lock Control (to reduce picture jitter) WARNING press the VCR button on the remote and try the button again. press the VCR button on the remote and try the button again.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the
SLP
(Super Long Play) 3 Hours 6 Hours 8 Hours In Still mode, CH (TRACKING) / operate as a Over tightening “Nut type” RF coaxial cables 3 Press ACTION to start clock and exit.
V-Lock control. may damage jacks. Finger tighten only.
user’s authority to operate.
-2- -3- -4- -5- -6- -7-
