ZDWC240NBS – GE Monogram Stainless Steel Wine Chiller

Reviews
Shared by: ChrisCaflish
Stats
views:
0
rating:
not rated
reviews:
0
posted:
8/21/2009
language:
English
pages:
0
ZDWC240NBS – GE Monogram Stainless Steel Wine Chiller Dimensions and Specifications (in inches) Installation Space Locate Outlet 24" Min. 34-1/2"-35" 6" Max. 24" Max. 22-7/8" The cutout depth must be 24" The cutout dimensions shown allows for a full door swing and access to the pull-out racks when installed as a built-in. • The wine chiller can be installed freestanding. • If installing between frameless cabinets, a 1/2" wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the wine chiller case and adjacent cabinet door swing. The width of the opening must include the filler panels. Note: The door should protrude 1" beyond the surrounding cabinets. Additional Specifications: • A 120 volt 60Hz., 15 or 20 amp power supply is required. An individual property grounded branch circuit or circuit breaker is recommended. Install a properly grounded 3-prong electrical receptacle recessed into the back wall as shown. Electrical must be located on rear wall as shown. Note: GFI (ground fault interrupter) is not recommended. 34-1/2" 24-3/8" Including Handle 23-1/2" The wine chiller is factory set for a 110° door swing. When installed in a corner: 90° Door Swing • Allow 4" min. clearance on the hinge side for the 90° door swing 20-7/8" to allow racks to slide out. and • Allow 10" minimum clearance on the hinge side for a full 110° door swing. 20-7/8" • The door swing is reversible on all models. If desired, change the door swing before installation. Choose the location: 23-5/8" • The wine chiller may be closed in on the top and three sides as long as the front is unobstructed for air circulation and proper 90° access to the door. 23-5/8" • Do not install the wine chiller where the temperature will go below 55°F 4" Minimum (13°C) or above 90°F (32°C). 90° to Wall Do not install where it will be subject to direct sunlight, heat • or moisture. Staining Wood Drawer Fronts 4" Minimum to Wall The wood drawer fronts on the wine chiller may be stained to match adjacent cabinetry. • The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened. Listed by Underwriters Laboratories ® For answers to your Monogram, GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000. Product Clearances 10" Minimum to Wall 10" Minimum to Wall 110° 110° Specification Revised 5/04 120024 R ZDWC240NBS – GE Monogram Stainless Steel Wine Chiller Dimensions and Specifications (in inches) Side-by-Side Installations Increase storage capacity by installing two Monogram wine chillers together. Or for a complete refreshment center, install a beverage center and wine chiller together. • A side-by-side installation requires a 48" wide opening. No trim kits required. • Products must operate from properly grounded separate receptacles. Locate Outlet 34-1/2"-35" 6" Max. 24" Min. 48" Min. Grounding the Wine Chiller IMPORTANT – (Please read carefully) FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall out. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD. DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET. DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE. Tools Required • #2 Phillips screwdriver • 1" open-end wrench • Torx screwdriver • Flat edge tool Hardware Supplied • Monogram Badge • Hardware for changing door swing R Listed by Underwriters Laboratories Specification Revised 5/04 120024 ® For answers to your Monogram, GE Profile™ or GE appliance questions, visit our website at GEAppliances.com or call GE Answer Center® service, 800.626.2000. ZDWC240NBS – GE Monogram Stainless Steel Wine Chiller Features and Benefits • Total Capacity – 57 Wine Bottles • Adjustable Temperature Control • 7 Full-Width Slide Out Racks • Interior Light • See-Thru Glass Door • Stainless Steel Tubular Handle • Built-In or Free-Standing Installation Options • Model ZDWC240NBS – Stainless steel Specification Revised 5/04 120024

Related docs
The GE Monogram Wine Chiller ZDWC240NBS
Views: 35  |  Downloads: 0
The GE Monogram Wine Chiller ZDW24A
Views: 192  |  Downloads: 0
[REF_2008.xls]
Views: 2  |  Downloads: 0
premium docs
Other docs by ChrisCaflish
Mom and Dad in the 60s
Views: 191  |  Downloads: 0
Microbiology Catalase Test Results
Views: 5978  |  Downloads: 24
Credit scoring
Views: 114  |  Downloads: 0
MINUTES OF SPECIAL MEETING OF SHAREHOLDERS
Views: 892  |  Downloads: 60
Treaty of Alliance with France info
Views: 267  |  Downloads: 0
Flyer_The_Fully_Networked_Car_20Jun06
Views: 137  |  Downloads: 0
Vermont articles of incorporation nonprofit
Views: 262  |  Downloads: 1
Foreign licensee
Views: 191  |  Downloads: 5
Equipment and programming loan agreement
Views: 350  |  Downloads: 6
Assignment of registered trademark
Views: 220  |  Downloads: 1
301 Useless Facts
Views: 355  |  Downloads: 5