WEXCO CORPORATION 1015 Dillard Drive, P.O. Box 4297 Lynchburg, VA 24502 USA PH: 434-385-6006 or 800-999-3926 FX: 434-385-8387 www.wexco.com Since 1975
Bolt torque Specifications:
Shown is the bolt tightening sequences for typical circular flanges. Do not fully tighten the bolts the first time around as this can tilt the flange out of parallel. The first time around tighten to approximately 1/2 of the final torque, and then repeat the sequence, tightening to the suggested torque limit.
6 Bolts
12 Bolts
8 Bolts
14 Bolts
10 Bolts
16 Bolts