Docstoc

DPP-350 -izdanie 2-ENpmd

Document Sample
DPP-350 -izdanie 2-ENpmd Powered By Docstoc
					                                                                                      identif.No: WI 07.01.52
      1 DATECS                                            EN ISO 9001:2000
                                                         WORK INSTRUCTIONS                   Version: 2
                                        model: DPP-350                  edition: 02       Page. 1 from 30




                                    ESC/POS printer
                                    DPP-350




                                                          Signature:      Date:
Made by:       Svetlomira Jeliazkova                                   09.2007
Checked by:    Antonio Kandov                                          09.2007
Approved by:   Hristina Yordanova                                      09.2007
                                                                                                                                        identif.No: WI 07.01.52
     1 DATECS                                                                                            EN ISO 9001:2000
                                                                                                        WORK INSTRUCTIONS                      Version: 2
                                                                     model: DPP-350                                       edition: 02       Page. 2 from . 30




                                         CONTENTS

1.    ESC/POS printer DPP-350 ............................................................................ 3

2.    Assembly scheme ......................................................................................... 4

3.    Scheme of card reader module .................................................................... 5

4.    Scheme of MiFare reader module ................................................................ 6

5.    Main PCB scheme ......................................................................................... 7

6.    Modules for assembling of DPP-350 .......................................................... 8

7.    Assembling DPP-350 .................................................................................. 13
7.1   Preparation of bottom cover ........................................................................ 13
7.2   Preparation of top cover ............................................................................... 21
7.3   Closing of printer DPP-350 ......................................................................... 23

8.    Testing printer DPP-350 .............................................................................. 24
8.1   Testing charging of Li-ion battery (7.4V/2000mAh) .................................... 24
8.2   Testing of buttons, buzzer and printer mechanism .................................... 25
8.3   Testing of RS232 communication .............................................................. 26
8.4   Testing of USB communication .................................................................. 26
8.5   Testing of Bluetooth communication .......................................................... 27
8.6   Testing of mag-stripe reader module ......................................................... 27
8.7   Testing of smart card reader module ......................................................... 28
8.8   Testing of MiFARE contactless card reader module .................................. 28

9     Packing of DPP-350 .................................................................................... 29

      History of Document changes ..................................................................... 30
                                                                                           identif.No: WI 07.01.52
     1 DATECS                                               EN ISO 9001:2000
                                                           WORK INSTRUCTIONS                      Version: 2
                                       model: DPP-350                        edition: 02       Page. 3 from . 30

1. ESC/POS PRINTER DPP-350
 Position   Number            Name                                 Qty.     remark
                              Documentation
            DPP350 000.000    Assembly scheme
                              ASSEMBLED UNITS
 1                            Buzzer                               1
 2                            Bluetooth PCB                        1
 3                            Connectors PCB                       1
 4                            Main PCB                             1
 5                            SD WiFi PCB                          1
 6          DPP350 100.000    Card reader module                   1
 7          DPP350 200.000    MiFARE reader module                 1
                              PARTS
 8                            Battery                              1
 9          DPP350 000.001    Right Button                         1
 10         DPP350 000.002    Left Button                          1
 11         DPP350 000.003    Label                                2
 12         DPP350 000.004    Rubber cover for SD card             1
 13         DPP350 000.005    Bottom cover
 14         DPP350 000.006    Top cover
 15         DPP350 000.007    Paper cover                          1
 16         DPP350 000.0018   Left connector cap                   1
 17         DPP350 000.0019   Right connector cap                  1
 18         DPP350 000.008    Battery cover                        1
 19         DPP350 000.009    Keyboard                             1
 20         DPP350 000.010    Belt hook                            1
 21         DPP350 000.011    Opening lever                        1
 22         DPP350 000.012    Paper cutter                         1
 23         DPP350 000.013    Paper separator right 58mm           1
 24         DPP350 000.014    Paper separator left 58mm            1
 25         DPP350 000.015    Silicone plate                       1
 26         DPP350 000.016    Lightguide                           1
 27         DPP350 000.020    Bottom cover cap                     2
 28         DPP350 000.017    Battery cover opener                 2
                              STANDARD PARTS
 29                           Screw 2.2 x 6.5 DIN7981C             2
 30                           Screw 2.5 x 8                        4
 31                           Screw 2.9 x 9.5 DIN7981Ô             1
 32                           Screw 2 x 3                          3
 33                           Screw 2 x 6                          3
 34                           Screw 2 x 8                          2
                                                               identif.No: WI 07.01.52
 1 DATECS                       EN ISO 9001:2000
                               WORK INSTRUCTIONS                      Version: 2
              model: DPP-350                     edition: 02       Page. 4 from . 30




2. ASSEMBLY
SCHEME
                                                                                                         identif.No: WI 07.01.52
       1 DATECS                                                           EN ISO 9001:2000
                                                                         WORK INSTRUCTIONS                      Version: 2
                                                        model: DPP-350                     edition: 02       Page. 5 from . 30



     3. SCHEME OF CARD READER MODULE




Position   Number           Name                                 Qty.
                            Documentation
           DPP350 100.000   Assembly scheme
                            ASSEMBLED UNITS
1          DPP350 110.000   Magnetic head                        1
2                           Card reader PCB                      1
                            PARTS
3          DPP350 100.001   Front cover of card reader module    1
4          DPP350 100.002   Lightguide of card reader            1
5          DPP350 100.003   Spring                               1
                            STANDARD PARTS
6                           Screw 2.4 x 4                        1
7                           Screw 2 x 3                          1
8                           Screw 2 x 6                          4
                                                                                                         identif.No: WI 07.01.52
       1 DATECS                                                           EN ISO 9001:2000
                                                                         WORK INSTRUCTIONS                      Version: 2
                                                      model: DPP-350                       edition: 02       Page. 6 from . 30



    4. SCHEME OF MIFARE READER MODULE




Position   Number           Name                                  Qty.
                            DOCUMENTATION
           DPP350 200.000   Assembly scheme
                            ASSEMBLED UNITS
1                           MIiFare PCB                           1
                            PARTS
2          DPP350 200.001   Front cover of MiFare reader module   1
                                                                                                  identif.No: WI 07.01.52
     1 DATECS                                                      EN ISO 9001:2000
                                                                  WORK INSTRUCTIONS                      Version: 2
                                                 model: DPP-350                     edition: 02       Page. 7 from . 30



    5. MAIN PCB SCHEME




Position   Number           Name                           Qty.
                            DOCUMENTATION
           DPP350 300.000   Assembly scheme
                            ASSEMBLED UNITS
1                           FTP 638ÑÂ103                   1
                            PARTS
2                           PCB                            1
3          DPP350 300.001   Printer attachment             1
                                                                                             identif.No: WI 07.01.52
1 DATECS                                           EN ISO 9001:2000
                                                  WORK INSTRUCTIONS                                 Version: 2
                                 model: DPP-350                     edition: 02                  Page. 8 from . 30




6. Modules for assembling of DPP-350

• Main PCB (fig. 1)
• Card Reader PCB     (fig. 2)

• Bluetooth PCB (fig.3)
• USB PCB (fig. 4)
• Mifare antenna (fig. 5)
                                                                                  Fig.1




                                                                     Fig.2                        Fig.3




                                                                      Fig.4          Fig.5
                                                                                            identif.No: WI 07.01.52
1 DATECS                                      EN ISO 9001:2000
                                             WORK INSTRUCTIONS                                     Version: 2
                            model: DPP-350                     edition: 02                         Page. 9 from . 30




• MCR cable (fig. 6)
• MCR head (fig. 7)
• Bottom cover   (fig. 8)

• Top cover (fig. 9)
• Paper cover (fig. 10)                                           Fig.6            Fig.7




                                                          Fig.8                            Fig.9




                                                                          Fig.10
                                                                                                                     identif.No: WI 07.01.52
1 DATECS                                                              EN ISO 9001:2000
                                                                     WORK INSTRUCTIONS                                      Version: 2
                                                    model: DPP-350                     edition: 02                      Page. 10 from . 30




• Front cover for Card        Reader Module (Fig. 11)

• Front cover    when there is no Card Reader module (fig. 12)

• Attachment for printer mechanism (fig. 13)
                                                                                             Fig.11                        Fig.12
• Battery cover   (fig. 14)

• Rubber cover for SD card (fig. 15)
• Belt hook (fig. 16)
• Printer mechanism FTP-638 (fig. 17)
• Left button   (fig. 18)
                                                                                             Fig.13                        Fig.14
• Right button    (fig. 19)




                                                                                    Fig.15              Fig.16                Fig.17




                                                                                               Fig.18       Fig.19
                                                                                                                 identif.No: WI 07.01.52
1 DATECS                                                       EN ISO 9001:2000
                                                              WORK INSTRUCTIONS                                         Version: 2
                                             model: DPP-350                     edition: 02                         Page. 11 from . 30




• Keyboard (fig. 20)
• Silicone plate (fig. 21)
• Paper cutter (fig. 22)                                                     Fig.20                                Fig.21

• Buzzer prepared for production (fig. 23)
• Lightguide (fig.24)
• Opening lever    (fig. 25)

• Roller from printer mechanism (fig. 26)                                      Fig.22                               Fig.23

• Li-ion battery (fig. 27)
• Holder of MCR head(fig. 28)
• Holder of battery cover (fig.29)                                                             Fig.25




                                                                                               Fig.26
                                                                    Fig.24



                                                                                                                        Fig.27




                                                                                      Fig.28            Fig.29
                                                                                                        identif.No: WI 07.01.52
1 DATECS                                                             EN ISO 9001:2000
                                                                    WORK INSTRUCTIONS                          Version: 2
                                            model: DPP-350                            edition: 02            Page. 12 from . 30




• Lightguide for Card   Reader (fig. 30)

• Cable for connection of main PCB and Card Reader PCB - 4 pins, 9 cm (ig.
31)

• Cable for connection between main PCB and Bluetooth PCB - 4 pins, 15 cm
(fig. 32)                                                                                 Fig.30




                                                                                          Fig.31    Fig.32
                                                                                                                identif.No: WI 07.01.52
1 DATECS                                                              EN ISO 9001:2000
                                                                     WORK INSTRUCTIONS                                 Version: 2
                                              model: DPP-350                           edition: 02                 Page. 13 from . 30




7. Assembling DPP-350
7.1 Preparation of bottom cover

   To the bottom cover (pos.13) is mounted USB PCB (pos.3) with the help of one screw
2 õ 6 mm (pos.30) (fig. 33)


  REMARK:
  Plastic attachment (fig. 34) of printer
  mechanism is removed taking care
  that optron cable is not destroyed or
  cut.!
                                                                                                     Fig.33




                                                            Fig.34




   Optron (pos.ÎÏ1) is placed on inner side of printer mechanism’s attachment (pos.3)
in a socket (pos.Ã1) and is glued with two drops of hot silicone (fig. 35)




                                                                                                       Fig.35
                                                                                                          identif.No: WI 07.01.52
1 DATECS                                                                   EN ISO 9001:2000
                                                                          WORK INSTRUCTIONS                      Version: 2
                                               model: DPP-350                               edition: 02      Page. 14 from . 30




    Printer mechanism’s attachment is placed via guides (pos.ÂÄ1) in
the channels of printer mechanism (pos.ÊÍ1) (fig. 36).




  Flat cable of printer mechanism is connected to Main PCB in connector
CN3 (fig. 37).
                                                                                          Fig.36




                                                                                                           Fig.37


  Main PCB (pos.4) is fixed with 2 screws 2 õ 6mm (pos.30), and printer
mechanism – with 2 screws 2 õ 8 mm (pos.31) to bottom cover (fig. 38)




                                                                                          Fig.38
                                                                                                                  identif.No: WI 07.01.52
1 DATECS                                                                  EN ISO 9001:2000
                                                                         WORK INSTRUCTIONS                               Version: 2
                                                 model: DPP-350                            edition: 02               Page. 15 from . 30




 REMARK:
 Make sure that when Main PCB is placed there is correct connection
 between the 2 PCB’s - Main and USB (pos ÊÏ1.) (fig. 39)




 REMARK:
 Cog (pos.ÁÇ1) of bottom cover must enter in hole (pos.ÎÒ1) on printer                                   Ôèã.39
 mechanism (fig. 40).




    2 pcs. battery cover opener (pos.25) are put in the holes (pos.Î1)                                                          Fig.40
on battery cover (pos.16), a clic should be heard and cogs should
enter in respective places (pos.Î2) (fig. 41).




    Li-ion battery (pos.8) is connected to connector CN4 on Main PCB                Fig.41
(fig. 42).




                                                                                                                           Fig.42
                                                                                                                       identif.No: WI 07.01.52
1 DATECS                                                                   EN ISO 9001:2000
                                                                          WORK INSTRUCTIONS                                   Version: 2
                                                  model: DPP-350                            edition: 02                      Page. 16 from . 30




    Battery cover is placed as shown on (fig. 43). Battery cover opener
(pos..25) is turned in direction shown with arrow (À1) for closing of
battery cover,for opening - in the direction shown with arrow (À2).




Option:                                                                              Fig.43
Belt hook (pos.18) is fixed with a screw 2.9 õ 9.5 mm (pos.28) to the
battery cover (fig. 44).




                                                                                                          Fig.44
   2 pcs. labels are adhered in the appointed places (pos.Å1) (fig. 44)
                                                                     .



     When there is no card reader module attach front cover (fig.12) to
bottom cover in the place shown with the help of hooks (fig. 45a and
fig. 45b)(when there is no Card Reader Module).




                                                                                   Fig.45a                         Fig.45b
                                                                                                                  identif.No: WI 07.01.52
1 DATECS                                                                  EN ISO 9001:2000
                                                                         WORK INSTRUCTIONS                               Version: 2
                                                 model: DPP-350                            edition: 02                 Page. 17 from . 30




Option (placing Card Reader PCB)
  Solder MCR cable (fig.6) to MCR head (fig.7) in the direction and
way shown in fig.46 , pass through Card Reader PCB (fig.47)and solder
PCB (fig.48).




                                                                                       Fig.46            Fig.47




   Solder Mifare antenna (fig.5) at the place shown (fig.49). Fold as
shown on picture on fig. 50 and stick with thin double-side tape to th
e smart card reader on back side (fig.51) .



                                                                                          Fig.48                   Fig.49




                                                                              Fig.50                          Fig.51
                                                                                                                     identif.No: WI 07.01.52
1 DATECS                                                                     EN ISO 9001:2000
                                                                            WORK INSTRUCTIONS                               Version: 2
                                                  model: DPP-350                              edition: 02               Page. 18 from . 30




    Fix carefully lightguide for Card Reader Module (fig.30) with one drop of
 hot silicone or strong fix glue to front cover (fig.52).




                                                                                                            Fig.52


     To front cover of Card Reader module fix MCR head with spring
(fig.53a) and screw with screw 2 õ 3mm (fig.53b).

Mount holder of MCR head (fig.28) to magnetic head (fig.54a) and fix
with screw 2.3 õ 4mm (fig.54b).



                                                                                               Fig.53a                Fig.53b




                                                                                              Fig.54a                  Fig.54b
                                                                                                       identif.No: WI 07.01.52
1 DATECS                                                                EN ISO 9001:2000
                                                                       WORK INSTRUCTIONS                      Version: 2
                                               model: DPP-350                            edition: 02      Page. 19 from . 30




    Mount the prepared Card Reader PCB (fig.55a) and fix with the
help of 4 screws 2 õ 6 mm to Front Cover (fig.55b).




                                                                                           Fig.55a         Fig.55b




    Place connection cable between Main PCB and Card Reader PCB
(fig.2) respectively to connector CN8 and connector CN1 (fig.56)




                                                                                       Fig.56
   Card Reader Module (pos.6) is attached to bottom cover with hooks
(pos. ÏÊ1)   (fig.57)




                                                                                                              Fig.57
                                                                                                              identif.No: WI 07.01.52
1 DATECS                                                                    EN ISO 9001:2000
                                                                           WORK INSTRUCTIONS                         Version: 2
                                                   model: DPP-350                            edition: 02         Page. 20 from . 30




Option (mounting of Bluetooth PCB)
  REMARK:
  Bluetooth PCB is mounted before the fixture of Main PCB and USB
  PCB!


     First connect the cable between Bluetooth PCB and Main PCB
(fig.32) respectively in CN7 of Main PCB (fig.58a) and connector CN2
on Bluetooth PCB (fig.58b).

                                                                                                   Fig. 58a        Fig. 58b

  The cables are stuck consecutively through the slots named
ÂÒ2, ÂÒ3, ÂÒ4 and ÂÒ5. - (fig.59a and fig. 59b).



    Bluetooth PCB (pos.2) is installed in the right side of bottom cover
in the slot shown on picture (fig.59a) between (pos.BT1à) and
(pos.ÂÒ1á) (fig.59b).




                                                                                        Fig. 59a                  Fig. 59b
                                                                                                                         identif.No: WI 07.01.52
1 DATECS                                                                      EN ISO 9001:2000
                                                                             WORK INSTRUCTIONS                                  Version: 2
                                                    model: DPP-350                             edition: 02                  Page. 21 from . 30




7.2 Preparation of top cover
  Rubber cover for SD card (pos.12) is placed in the guides (pos.Â1)
on top cover (fig.60).

   Righjt button (pos.9) and left button (pos.10) are placed in the
respective nests on top cover (pos.14),after that the keyboard is
adhered (pos.17) (fig.61).




                                                                                           Fig. 60             Fig. 61



   Place the silicone plate (pos.23) and paper cutter (pos.20) and fix
them with three screws 2 õ 3 mm (pos.29) (fig.62).




    Place the lightguide (pos.24) and with the help of a soldering iron
melt the two pegs so that it sticks (pos.Ô1). In the nest for the buzzer
(pos.ÃÍ1) put a drop of hot silicone or instant fix glue - take care that
the central hole is not blocked and put the ready buzzer (pos.1) (fig.63).




                                                                                       Fig. 62               Fig. 63
                                                                                                            identif.No: WI 07.01.52
1 DATECS                                                                  EN ISO 9001:2000
                                                                         WORK INSTRUCTIONS                         Version: 2
                                                 model: DPP-350                            edition: 02            Page. 22 from . 30




    Opening lever (pos.19) is placed in the respective place (pos.Ó1)
on paper cover (pos.15), so that a click is heard making the movements
in the directions shown (1&2) (fig.64)




   The so prepared paper cover is attached to top cover - the shafts
pos.ÂÎ1 are placed in holes pos.ÂÎ2 (fig.65).




                                                                                     Fig.64




                                                                                                         Fig.65
                                                                                                                    identif.No: WI 07.01.52
 1 DATECS                                                                   EN ISO 9001:2000
                                                                           WORK INSTRUCTIONS                               Version: 2
                                                  model: DPP-350                             edition: 02               Page. 23 from . 30




 7.3 Closing of printer DPP-350
    Connect the buzzer to connector CN9 on Main PCB (fig.66) and
 connect the two covers (ôèã.67).

    With four screws 2.5 õ 8 mm (pos.27) are fixed the two covers in the
 middle and back side.
    With another two screws 2.2 õ 9.5 mm (pos.26) are fixed the two
 covers in the front side (fig.68).

                                                                                        Fig.66


                                                                                                           Fig.67

   Printer mechanism’s Roller (fig.26) is
placed in the respective place (Ó2) on
paper cover so that a click is heard (fig.69).

   Place the paper cover in the plae for it
and close paper cover.
    After this step thermal printer DPP-350
is fully assembled! (fig.70).




                                                      Fig.68
                                                                                                 Fig.69                   Fig.70
                                                                                                                      identif.No: WI 07.01.52
1 DATECS                                                                      EN ISO 9001:2000
                                                                             WORK INSTRUCTIONS                               Version: 2
                                                    model: DPP-350                             edition: 02               Page. 24 from . 30




8. Testing Printer DPP-350
8.1 testing of charging of LiIon battery (7.4V/2000mAh)

   Before the device assembly is tested the charging of LiIon battery.
   For this connect
• battery to connector CN4
• adapter   9V/1A, plugged in main supply, connector to CN5 (fig.71).

   Lightguide LED1 on Main PCB starts to shine in red color and with                            Fig.71                   Fig.72
the help of multimeter measure the fall of resistor R29 – 0.15Ω. If is
registered voltage in the range from 10mV to 100mV (fig.72) and with
an oscilloscope are registered oscillations at the output of the IC (input
of coil L1) , these should be with frequency and amplitude as shown
on fig.73, (to be present), this means that the IC responsible for LiIon
battery charging works OK and battery is being charged with the
necessary current.
    When battery is fully charged LED1 starts to shine in green!




                                                                                                             Fig.73
                                                                                                                    identif.No: WI 07.01.52
1 DATECS                                                                    EN ISO 9001:2000
                                                                           WORK INSTRUCTIONS                               Version: 2
                                                  model: DPP-350                             edition: 02               Page. 25 from . 30



8.2 Testing of buttons, buzzer and printer mechanism

    The buzzer and printer mechanism are tested after the device is
fully assembled.
    For this purpose is started self test (diagnostic data) with the two
buttons on printer. :
                                                                                        Fig.74             Fig.75

− Press and hold button     (LF) (fig.74).

− At the same time press button button       (ON/OFF) (fig.75). After 1

sec. release (LF) button. The printer makes a noise and the ERROR
LED lights in red (fig.76). After that diagnostic data is being printed
(short self test) (fig.77).
This is the end of test for buttons, buzzer and printer mechanism




 REMARK:

 Long self test is printed when the button     (LF) ) is pressed and                     Fig.76
 held for 2 seconds! (fig.78)




                                                                                         Fig.77                      Fig.78
                                                                                                                    identif.No: WI 07.01.52
1 DATECS                                                                    EN ISO 9001:2000
                                                                           WORK INSTRUCTIONS                               Version: 2
                                                  model: DPP-350                             edition: 02               Page. 26 from . 30



8.3. Testing of RS232 communication

    Printer’s RS232 communication is tested after the device is fuly assembled.

    To do this enter in download mode - first press button   (LF), then - button “ON/

OFF” and hold button  (LF) for 10 seconds. Printer makes a continuous noise
which means that DPP-350 is in “download” mode.
−   Printer is connected to a PC with RS232 cable via RS232 interface (fig. 79).                           fig.79

−   Start program LoadDPP350.exe, set COM-port to which is connected the cable.
−  Choose file (e.g.DPP350.tsk) and press button DOWNLOAD in the program.
   If the printer’s firmware is downloaded successfully thenthe RS232
communication works OK.




8.4 Testing USB communication

  Test is made with a Blackberry PDA, it is connected to printer DPP-350 with mini
USB cable (ô fig. 80) connected to mini USB port of printer.
− When the Blackberry PDA is connected to the DPP-350 a noise is heard.
−   When is started program Blackberry JavaSDKTest from its menu choose for
instance Print Long Test and the printer should print the Long Self Test data.
    If this is done, this means that the USB communication of printer is working OK.




                                                                                                  Fig.80
                                                                                                                       identif.No: WI 07.01.52
1 DATECS                                                                      EN ISO 9001:2000
                                                                             WORK INSTRUCTIONS                                Version: 2
                                                   model: DPP-350                              edition: 02                Page. 27 from . 30




8.5 Testing of Bluetooth communication
   Test is made with a Blackberry PDA , which must support Bluetooth communication and with a
switched on printer DPP-350.

    REMARK:
    Set switch 4 (SW4), so that the printer is in protocol mode (only for PDA Blackberry). Make self test
    to make sure that the printer is set in protocol mode (fig. 78)


−   Set in OPTION,the Bluetooth communication of the PDA.
−  Select ADD DEVICE, then the device should be discovered (as device DATECS DPP-350) from the
PDA,password that must be input is ”0000”. Printer is added in the list of discovered devices that
support Bluetooth .
− Start program Blackberry JavaSDKTest and from its menu select e.g. Print Long Test,then the Long
self test should be printed.
     If this is done this means that the Bluetooth communication of printer works OK.
                                                                                                             Fig.81


8.6 testing of mag-stripe reader module
   Test is done with a Blackberry PDA device, which is connected to a switched on printer DPP-350 via
mini USB USB cable (fig.80) connected to the mini USB port of printer .
− Start program Blackberry JavaSDKTest and from its menu select Read Card Tracks.
−  Lightguide of Card Reader Module starts to blink in green, then swipe a 3-track magnetic card in the
direction shown on fig.81 .
− Blackberry’s display should show the data that is read from the magnetic card tracks.
(Track1,Track2,Track3).
−   Select yes from program’s menu.
−    The printer will print the result of themagnetic card tracks read (fig. 82)
     If all the above is done as described this means that the magnetic card reader works OK.
                                                                                                              Fig.82
                                                                                                                      identif.No: WI 07.01.52
1 DATECS                                                                      EN ISO 9001:2000
                                                                             WORK INSTRUCTIONS                               Version: 2
                                                   model: DPP-350                              edition: 02               Page. 28 from . 30



8.7 Testing of smart card reader module
  Test is done with a Blackberry PDA device, which is connected to a switched on printer
DPP-350, via mini USB cable connected to the mini USB port of printer.
−    Insert a “smart” card in the Card reader module in the way and place as shown in fig. 83
.
−    Start program Blackberry JavaSDKTest and from its menu select Reset Smart Card.
−  The Blackberry’s display should show the data (in HEX code) from the card that is read
after RESET .
    If all the above is done as described this means that the smart card reader works OK.


8.8 Testing of MiFARE contactless card reader module
  Test is done with a Blackberry PDA device, which is connected to a switched on printer                     Fig.83
DPP-350, via mini USB cable connected to the mini USB port of printer.
−    Place a “Mifare” card infront of the Card Reader module as shown on fig.84 .
−    Start program Blackberry JavaSDKTest and from its menu select Mifare Info.
−     The Blackberry’s display should show data - state and serial number of the card read.
−  Select button YES from program’s menu. Printer will print the result - data read from
contactless card .
    If all the above is done as described this means that the MiFARE card reader works
OK.



    REMARK:
    THE TESTS DESCRIBED IN TEST 8.6, 8.7 and 8.8 can be run from a PC with the
    help of program CACUTIL.exe(use RS232 interface cable) in a way similar as it is
    done with a PDA Blackberry!

                                                                                                             Fig.84
REMARK:
Tests 8.6, 8.7 and 8.8 can be run from a PC with the help of CACUTIL.exe or with a
PDA Blackberry via Bluetooth interface!
                                                                                              identif.No: WI 07.01.52
1 DATECS                                                       EN ISO 9001:2000
                                                              WORK INSTRUCTIONS                      Version: 2
                                             model: DPP-350                     edition: 02      Page. 29 from . 30




 9. Packing of DPP-350
 PrinterDPP-350 is packed in a nylon bag.
 Carton box includes also:
 - Adapter 9V/1A
 - Connection cable for connection with PC
 - Users manual
 -Thermal Paper- 1 pce x 80mm
                                                                                      identif.No: WI 07.01.52
1 DATECS                                           EN ISO 9001:2000
                                                  WORK INSTRUCTIONS                          Version: 2
                               model: DPP-350                       edition: 02          Page. 30 from . 30




   History of document changes

   Version 2 (14.09.2007):
   Changes:
   - VERSIONS OF MAIN PCB, CARD READER PCB AND SD CARD PCB ARE UPDATED.
   - UPDATE OF PICTURES FOR ASSEMBLING THE DEVICEÀêòóàëèçèðàíè
   - UPDATE IOF ASSEMBLY SCHEME AND CARD READER SCHEME AND THE CORRECPONDING TABLES

				
DOCUMENT INFO
Shared By:
Tags:
Stats:
views:12
posted:11/4/2011
language:English
pages:30
ps0001 ps0001
About