Embed
Email

Spy came

Document Sample
Spy came
Description

How to make spy cam

Categories
Stats
views:
2
posted:
10/26/2011
language:
English
pages:
2
SPY CAMERA AGES 6 & UP









TAKE REAL SPY PHO TOS...

LOOK COOL UNDERCOVER





IMPORTANT: Keep these instructions.DO NOT DISCARD. Spy Camera Sunglasses

Do not stare directly at the sun even when wearing the

sunglasses.Remove UV label from lens on sunglasses.

FEATURES (Figur e 1)



Features of the Spy Camera include:

• A mini 110 spy camera.

• Sunglasses.

• Kodak 110 film cartridge .

• A secret storage compartment disguised as a roll of film. Viewfinder

• A squeeze bulb to take photos.

• A viewfinder to center your photo subject.







FOR BEST PHO TO QUALITY :

• Take pictures outdoors in bright light conditions.

• Take pictures of objects 7-10 feet away (2-3 meters).

• Do not remove film until all pictures have been taken on the

roll of film and the film has been advanced to the end. Squeeze Bulb Secret Stora ge

Compartment



SPY CAMERA ASSEMBLY (No tools required)

Before you start,make sure you have the following items:

1. Spy Camera

2. Viewfinder

3. Sunglasses Figure 1

4. Tubing with Squeeze Bulb



1. Attach the Spy Camera to the sunglasses (Figure 2):

a.Locate clip on the Spy Camera.

b. Locate the flanges on the left arm of the sunglasses.

c.With the front of the Spy Camera facing in the same direction as the front of the sunglasses,slip the camera clip in between the flanges

on the sunglasses arm (Step 1) and rotate down as shown in (Step 2 ).



Step 1 Step 2









clip



Flanges







Figure 2





2.Attach the viewfinder to the camera assemb ly

a. As shown in Figure 3,snap viewfinder to clip on the Spy Camera (Step 1) and rotate down over the left lens of the sunglasses.(Step 2)





Step 1 Step 2









Figure 3

3.Attach squeeze bulb assemb ly to Spy Camera

a.Locate end of tubing not attached to squeeze bulb. (Figure 4)

b. Insert the tube into the hole on back side of the camera.Twist and push until the plastic tip is firmly seated.(Figure 5)





Figure 4

Figure 5









SECRET STORAGE COMPARTMENT

The Spy Camera comes with a secret storage compartment disguised as a film cartridge. Please note this is not film.It is used to store loose

change or other small items.It needs to be removed from the camera so that you can load the film in its place.





TO LOAD 110 FILM CARTRIDGE

1. Remove film from packaging.

2.Locate the door on the back side of the camera.(Figure 6)

3.Place finger in door groove and pry open.

4.Look at the film and locate the end with a raised up notch on it.

5. Position film as shown on the camera door diagram,or in Figure 6,and insert in the camera.

7.Close door.

8.Locate the advance winder on the bottom front side of the camera.(Figure 7)

9.With your finger, rotate the advance winder down until it stops.Your camera should be ready to

take pictures.

10.To Check that you have properly loaded the film,check the back side of the camera door.The

number “1” should appear in the little window. (Figure 8) Figure 6





HOW TO T AKE GREAT SPY PICTURES

A large viewfinder has been included with the Spy Camera so you can easily take photos.

1. Put on sunglasses with Spy Camera attached.

2.Flip down viewfinder in front of the left lens on the sunglasses.It should click into position.

3.Check to verify that film,is advanced and ready.

4.Place squeeze bulb in your hand.

5.Find the subject you wish to photograph.

6.Center it within the viewfinder on your left eye. (Figure 9)

7.Squeeze the Squeeze Bulb.You will hear a click sound which indicates the picture has been taken.

8.Rotate the advance winder downward until it stops.The next picture Frame number will appear

throught the camera window.

9.Find a new subject and repeat the steps to take a picture. Figure 7

(Hint:when you are not taking pictures, you can flip the viewfinder up out of your way. Just rotate it up.)

Advance Winder

TO UNLOAD 110 FILM CARTRIDGE:

1.Advance the Winder until it stops and nothing shows through the window on the camera door.

2.Open camera door.

3.Remove film.It is now ready to be developed.

Note:When the film is developed,each picture will be framed with a black “Spy Cam” border as

shown in Figure 10.









Spy Camera

70027-4000 5/2/99

Wild Planet Toys,Inc.

Figure 8

Figure 9

WARNING:

Figure 10

CHOKING HAZARD: Small Parts

Not for Children Under 3 Yrs.


Related docs
Other docs by Muhammad Moaaz...
C Sharp Programing
Views: 14  |  Downloads: 2
Postal Codes Of Pakistan
Views: 26  |  Downloads: 0
how to make 12 v water heater
Views: 26  |  Downloads: 0
Googel Adsense Starting Guide
Views: 9  |  Downloads: 0
Diy Home Made Generator
Views: 34  |  Downloads: 0
how to make small wind generator
Views: 40  |  Downloads: 0
Adsense Learning Guide
Views: 5  |  Downloads: 0
C Sharp Programing
Views: 12  |  Downloads: 1
Google Adsense Guide
Views: 15  |  Downloads: 0
Spy came
Views: 2  |  Downloads: 0
By registering with docstoc.com you agree to our
privacy policy

You are almost ready to download!

You are almost ready to download!