since 1870
BATHROOM
- Care
since 1870
Four decades have passed since what was then the
Bröderna Granberg joinery workshop built the first kitchen
specially designed for the physically disabled.
We now have a broader view of our aim. It involves making
day-to-day tasks simpler and more comfortable for eve-
ryone. By developing, manufacturing and supplying inno-
vative comfort features for kitchens and bathrooms, we
are now a world leader in this field – but with our feet still
firmly on the ground and with the determination to com-
mit ourselves to your particular needs and requirements.
TABLE OF CONTENTS
Bracket mount for washbasin
Manuline.........................................................................................................................2
Bracket system intended for environments where the height of the washbasin is not adjusted every day.
Motorised washbasin lifts
Basicline.............................................................................................................................8
A motorised washbasin lift is practical where there is a need to adjust the height of the washbasin every day.
Motorised washbasin lifts
Designline.........................................................................................................................20
Motorised washbasin lift with modern design.
Shower system
Glan....................................................................................................................................32
Low entry, reliable support handle. Replaces the bath when this becomes difficult to use.
BRACKET MOUNT FOR WASHBASIN MANULINE 4013
Bracket for mounting behind washbasin to improve legroom
To be mounted at a fixed height
Intended for environments where there is no need for height
adjustment
To be mounted beneath a mirror or mirrored cabinet
FUNCTION
MANULINE 4013 is a washbasin bracket which provides extra
legroom when sitting in front of the washbasin.
The height of the washbasin cannot be adjusted once it has
been mounted.
PLANNING INSTALLATION
When planning, note the following points: - The bracket is screwed to the wall.
- Beneath the bracket, there is free space for installation of the water pipe - The washbasin is mounted on the bracket.
and drain. - Mixer tap, water and drain hoses are installed.
- Check the condition of the wall (material, positioning of cross bars).
Plaster walls must be strengthened.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The bracket is prepared for a bolt-mounted washbasin with C-C 28 cm.
(Bolts for mounting washbasin included).
TECHNICAL SPECIFICATIONS
(cm)
kg 50 kg
60,0
20,0
28,0
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
BRACKET MOUNT FOR WASHBASIN MANULINE 4013
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Washbasin bracket 4013
- fixed height
60 61 20 401300-000
(cm)
20,0
Accessories Hose pack
1 x drain hose, length 70 - 103 cm.
Diameter at connection 5 cm or 4 cm
(with crosscutting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation
425-301 White
www.granberg.se 3
BRACKET MOUNT FOR WASHBASIN MANULINE 4031, 403, 4033
Bracket for manual adjustment of washbasin height
The height is continuously variable
Intended for environments where the height of the washba-
sin is not adjusted every day
To be mounted beneath a mirror or mirrored cabinet
FUNCTION
MANULINE 4031, 403, 4033 are washbasin brackets with manual
height adjustment. To be mounted beneath a mirror or mirrored
cabinet.
The top edge of the washbasin can be adjusted between 65 - 90 cm
from the floor.
(refers to installation at standard height)
PLANNING INSTALLATION
When planning, note the following points: - The rails are screwed to the wall.
- Beneath the bracket, there is free space for installation of the water pipe - The bracket is fitted to the rails and locked in place at the desired height.
and drain. - The washbasin is mounted on the bracket.
- Check the condition of the wall (material, positioning of cross bars). - Mixer tap, water and drain hoses are installed.
Plaster walls must be strengthened.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The bracket is prepared for a bolt-mounted washbasin with C-C 28 cm.
(Bolts for mounting washbasin included).
TECHNICAL SPECIFICATIONS
(cm)
25,0 cm
(65,0 - 90,0 cm)
60,0
kg 50 kg
20,0
50,0
28,0
65,0 - 90,0*
2,0
41,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 4 www.granberg.se
BRACKET MOUNT FOR WASHBASIN MANULINE 4031, 403, 4033
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Washbasin bracket 4031
Depth 3.6 cm
- manual height adjustment
60 70 3.6 403100-000
(cm)
3,6
Washbasin bracket 403
depth 12 cm
- manual height adjustment
60 70 12 403200-000
(cm)
12,0
Washbasin bracket 4033
depth 22 cm
- manual height adjustment
60 70 22 403300-000
(cm)
22,0
Accessories Hose pack
1 x drain hose, length 70 - 103 cm.
Diameter at connection 5 cm or 4 cm (with crosscut-
ting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation
425-301 White
www.granberg.se
BRACKET MOUNT FOR WASHBASIN MANULINE 4041, 404, 4043
Bracket for manual adjustment of washbasin height
The height is continuously variable
Intended for environments where the height of the washbasin
is not adjusted every day
Mirror and lighting also altered with the height adjustment
FUNCTION
MANULINE 4041, 404, 4043 are washbasin brackets with manual height adjust-
ment. The mirror or mirrored cabinet as well as the lighting can be mounted on the
installation panel. When the height is adjusted, the installation panel moves with
the washbasin.
The top edge of the washbasin can be adjusted between 65 - 90 cm from the floor.
(refers to installation at standard height)
PLANNING INSTALLATION
When planning, note the following points: - The rails are screwed to the wall.
- Beneath the bracket, there is free space for installation of the water pipe - The bracket is fitted to the rails and locked in place at the desired height.
and drain. - The installation panel is mounted on the rails.
- Check the condition of the wall (material, positioning of cross bars). - The washbasin is mounted on the bracket.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The bracket is prepared for a bolt-mounted washbasin with C-C 28 cm.
(Bolts for mounting washbasin included).
TECHNICAL SPECIFICATIONS
(cm)
25,0 cm 60,0 29,0
(65,0 - 90,0 cm)
kg 50 kg
100,5
168,0 - 193,0*
20,0
28,0
2,0
41,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
BRACKET MOUNT FOR WASHBASIN MANULINE 4041, 404, 4043
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Washbasin bracket 4041
depth 3.6 cm
- manual height adjustment
60 70 3.6 404100-100
(cm)
3,6
Washbasin bracket 404
depth 12 cm
- manual height adjustment
60 70 12 404200-100
(cm)
12,0
Washbasin bracket 4043
depth 22 cm
- manual height adjustment
60 70 22 404300-100
(cm)
22,0
Accessories Hose pack
1 x drain hose, length 70 - 103 cm.
Diameter at connection 5 cm or 4 cm (with crosscut-
ting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation
425-301 White
www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 411
Motorised washbasin lift for mounting of
standard washbasin
The height is continuously variable
Intended for environments where height adjustment takes
place often
To be mounted beneath a mirror or mirrored cabinet
FUNCTION
BASICLINE 411 is a washbasin lift with motorised height adjustment
for mounting of a standard washbasin.
To be mounted beneath a mirror or mirrored cabinet.
Control:
The washbasin can be raised to the desired height simply by pushing a
button. (65 - 90 cm when installed at standard height).
Choose between cable hand controls or a remote control.
Safety:
A safety switch is available as an accessory which stops the lift moving
when it touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The washbasin is mounted on the lift unit.
drain. - Mixer tap, water and drain hoses are installed.
- Check the condition of the wall (material, positioning of cross bars).
Plaster walls must be strengthened.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The lift is prepared for a bolt-mounted washbasin with C-C 28 cm.
(Bolts for mounting washbasin included).
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available)
1,8 cm / sek. 60,0
20,0
25,0 cm
65,0 - 90,0 *
(65,0 - 90,0 cm)
28,0
kg 50 kg
11,5
12,0**
20,5
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 411
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Washbasin lift 411
- motorised height adjustment
Cable hand controls 60 70 20.5 412100-003
Remote control 60 70 20.5 412100-002
Accessories
Cable Remote control
Hose pack Safety switch
hand controls
1 x drain hose, length 70 - 103 cm. The safety switch halts the
Diameter at connection 5 cm or 4 cm (with descent of the basin if it
crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation Art. no.
425-301 White 425-401
www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4131, 413
Motorised washbasin lift for mounting of standard washbasin
When the height is adjusted, the mirror and spotlight fitting
move with the basin
Free space beneath lift for installation of water pipe and drain
FUNCTION
BASICLINE 4131, 413 are washbasin lifts with motorised height adjustment
for the mounting of standard washbasins.
They are supplied with a mirror and light fitting with two spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the
basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The lift is prepared for a bolt-mounted washbasin with C-C 28 cm.
(Bolts for mounting washbasin included).
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
60,0 29,0
(110 V available)
1,8 cm / sek.
100,5
25,0 cm
(65,0 - 90,0 cm)
168,0 - 193,0*
kg 50 kg
20,0
65,0 - 90,0*
28,0
45,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 10 www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4131, 413
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Washbasin lift 4131
depth 11.5 cm
- motorised height adjustment
incl:
- mirror and lighting (2 spotlights)
Cable hand controls 60 70 11.5 413100-103
Remote control 60 70 11.5 413100-102
(cm)
11,5
Washbasin lift 413
depth 20 cm
- motorised height adjustment
incl:
- mirror and lighting (2 spotlights)
Cable hand controls 60 70 20 413200-103
Remote control 60 70 20 413200-102
(cm)
20,0
Accessories
Cable Remote control
Hose pack Safety switch
hand controls
1 x drain hose, length 70 - 103 cm. The safety switch halts the
Diameter at connection 5 cm or 4 cm (with descent of the basin if it
crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation Art. no.
425-301 White 425-401
www.granberg.se 11
MOTORISED WASHBASIN LIFTS BASICLINE 4131-01
Motorised washbasin lift, total depth 60.5 cm
Ergonomically designed washbasin
When the height is adjusted, the mirror and spotlight fitting
move with the basin
Free space beneath lift for installation of water pipe and drain
FUNCTION
BASICLINE 4131-01 is a washbasin lift with motorised height adjustment.
It is supplied complete with an ergonomically designed washbasin, mirror and light
fitting with two spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available) 60,0 29,0
60,0
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
168,0 - 193,0*
kg 40 kg
49,0
65,0 - 90,0*
60,5
45,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 1 www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4131-01
Width Planning Depth Art. no.
(cm) width (cm) (cm)
(Mixer tap available as accessory)
Basicline 4131-01 washbasin lift
- motorised height adjustment
incl:
- mirror and lighting (2 spotlights)
- Washbasin with overflow and trap cover/plug
(Villeroy & Boch OMNIA white 7119 63 01)
Cable hand controls 60 70 60.5 413101-103
Remote control 60 70 60.5 413101-102
Accessories
Cable Remote control
Mixer tap Hose pack Safety switch
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm. The safety switch halts the
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with descent of the basin if it
Spout projection 10.5 cm crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation Art. no.
425-101 425-301 White 425-401
www.granberg.se 13
MOTORISED WASHBASIN LIFTS BASICLINE 4131-03
Motorised washbasin lift, total depth 66.5 cm
Ergonomically designed washbasin with shallow basin and
long, re-sited drain to prevent collision with the user’s legs
Open counter top behind washbasin
When the height is adjusted, the mirror and spotlight fitting
move with the basin
Free space beneath lift for installation of water pipe and drain
FUNKTION
BASICLINE 4131-03 is a washbasin lift with motorised height adjustment.
It is supplied complete with an ergonomically designed washbasin, mirror and light
fitting with two spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available) 60,0 29,0
55,0
43,0
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
168,0 - 193,0*
kg 40 kg
65,0 - 90,0*
66,5
43,0
45,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 14 www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4131-03
Width Planning Depth Art. no.
(cm) width (cm) (cm)
(Mixer tap available as accessory)
Basicline 4131-03 washbasin lift
- motorised height adjustment
incl:
- Mirror and lighting (2 spotlights)
- Washbasin with overflow and trap cover/plug
(Keramag Vitalis 221556)
Cable hand controls 60 70 66.5 413103-103
Remote control 60 70 66.5 413103-102
Accessories
Cable Remote control
Mixer tap Hose pack Safety switch
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm. The safety switch halts the
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with descent of the basin if it
Spout projection 10.5 cm crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation Art. no.
425-101 425-301 White 425-401
www.granberg.se 1
MOTORISED WASHBASIN LIFTS BASICLINE 4131-0
Motorised washbasin lift, total depth 68.5 cm
Ergonomically designed washbasin with handle to facilitate
positioning of wheelchair under washbasin
Open counter top behind washbasin
When the height is adjusted, the mirror and spotlight fitting
move with the basin
Free space beneath lift for installation of water pipe and drain
FUNCTION
BASICLINE 4131-0 is a washbasin lift with motorised height adjustment.
It is supplied complete with an ergonomically designed washbasin with handle, mir-
ror and light fitting with two spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available) 60,0 29,0 59,0
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
168,0 - 193,0*
kg 40 kg
57,0
65,0 - 90,0*
68,5
45,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 1 www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4131-0
Width Planning Depth Art. no.
(cm) width (cm) (cm)
(Mixer tap available as accessory)
Basicline 4131-0 washbasin lift
- motorised height adjustment
incl:
- Mirror and lighting (2 spotlights)
- Washbasin with overflow and trap cover/plug
(Marlan Antaris 600)
Cable hand controls 60 70 68.5 413107-103
Remote control 60 70 68.5 413107-102
Accessories
Cable Remote control
Mixer tap Hose pack
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm.
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with
Spout projection 10.5 cm crosscutting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation
425-101 425-301 White
www.granberg.se 1
MOTORISED WASHBASIN LIFTS BASICLINE 4140
Motorised washbasin lift, total depth 64 cm,
total width 92 cm. Counter top beside basin
A safety switch in the form of a safety buffer underneath
the washbasin is included in the basic design
A bathroom cabinet is included in the basic design
When the height is adjusted, the mirror lighting and
bathroom cabinet move with the basin
Free space beneath lift for installation of water pipe
and drain
FUNCTION
BASICLINE 4140 is a washbasin lift with motorised height adjustment.
It is supplied complete with a washbasin with counter top, mirror, bathroom
cabinet and light fitting with two spotlights.
When the height is adjusted, the mirror, bathroom cabinet and spotlight fitting
move with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety buffer is located underneath the washbasin on its front edge. When the
buffer is touched, the lift stops.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The frame for the washbasin is mounted on the lift unit.
drain. - The washbasin is mounted on the frame.
- Check the condition of the wall (material, positioning of cross bars). - The installation panel is mounted on the lift unit.
Plaster walls must be strengthened. - The mirror, cabinet and light fitting are mounted on the installation
- Check that the planned installation area is at least the same width as the panel.
’planning width’ in the table on the adjoining page. - Mixer tap, water and drain hoses are installed.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available) 92,0 29,0
92,0
1,8 cm / sek.
100,5
25,0 cm
(65,0 - 90,0 cm)
168,0 - 193,0*
kg 20 kg
33,0
52,0
65,0 - 90,0*
14,0
64,0
45,0**
* Refers to installation at standard height
** Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 1 www.granberg.se
MOTORISED WASHBASIN LIFTS BASICLINE 4140
Width Planning Depth Art. no.
(cm) width (cm) (cm)
(Mixer tap available as accessory)
Basicline 4140 washbasin lift - right
- motorised height adjustment
incl:
- Mirror, cabinet and lighting (2 spotlights)
- Washbasin
(Ifö Sign Art 7472)
Cable hand controls, right-hand basin 92 102 64 414020-403
Remote control, right-hand basin 92 102 64 414020-402
Basicline 4140 washbasin lift - right
- motorised height adjustment
incl:
- Washbasin
(Ifö Sign Art 7472)
Cable hand controls, right-hand basin 92 102 64 414020-003
Remote control, right-hand basin 92 102 64 414020-002
(Mixer tap available as accessory)
Basicline 4140 washbasin lift - left
- motorised height adjustment
incl:
- Mirror, cabinet and lighting (2 spotlights)
- Washbasin
(Ifö Sign Art 7462)
Cable hand controls, left-hand basin 92 102 64 414021-403
Remote control, left-hand basin 92 102 64 414021-402
Basicline 4140 washbasin lift - left
- motorised height adjustment
incl:
- Washbasin
(Ifö Sign Art 7462)
Cable hand controls, left-hand basin 92 102 64 414021-003
Remote control, left-hand basin 92 102 64 414021-002
Accessories
Cable Remote control
Mixer tap Hose pack
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm.
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm
Spout projection 10.5 cm (with crosscutting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation
425-101 425-301 White
www.granberg.se 1
MOTORISED WASHBASIN LIFTS DESIGNLINE 410
Neatly designed motorised washbasin lift for mounting of
any washbasin
Rounded installation panel in laminate. Choose white or oak
When the height is adjusted, the mirror and spotlight fitting move with the
basin
The water and drain hoses are elegantly concealed behind a casing
FUNCTION
DESIGNLINE 410 is a washbasin lift with motorised height adjustment.
It is supplied with a mirror and light fitting with two spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin. The
water and drain hoses are concealed behind a casing.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it touches
the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The rounded installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The rounded installation panel is made of laminate.
Choose white or oak.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA 70,0 31,0
(110 V available)
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
177,0 - 202,0
kg 50 kg
28,0
45,0*
* Free space for water pipe and drain
12,0
Detailed installation instructions can be downloaded from www.granberg.se 0 www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Laminate:
White formica F7949 (NCS 0502Y)
Designline 410 washbasin lift
White laminate
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
Cable hand controls 70 80 12 417000-603
Remote control 70 80 12 417000-602
Laminate:
Oak formica K6149
Designline 410 washbasin lift
Oak laminate
- motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
Cable hand controls 70 80 12 417000-653
Remote control 70 80 12 417000-652
Accessories
Cable Remote control
Hose pack Safety switch
hand controls
1 x drain hose, length 70 - 103 cm. The safety switch halts the
Diameter at connection 5 cm or 4 cm (with descent of the basin if it
crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation Art. no.
425-301 White 425-401
www.granberg.se 1 425-302 Chrome/white
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-04
Neatly designed motorised washbasin lift, total depth 72 cm
Rounded installation panel in laminate. Choose white or oak
Ergonomically designed washbasin with shallow basin and long,
re-sited drain to prevent collision with the user’s legs
Open counter top behind washbasin
When the height is adjusted, the mirror and spotlight fitting move
with the basin
The water and drain hoses are elegantly concealed behind a casing
FUNCTION
DESIGNLINE 410-04 is a washbasin lift with motorised height adjustment.
It is supplied complete with an ergonomically designed washbasin, mirror and light
fitting with three spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin.
The water and drain hoses are concealed behind a casing.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The rounded installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the washba-
sin is to be mounted and the underlying wall.
- The rounded installation panel is made of laminate.
Choose white or oak. The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA 71,5 31,0
(110 V available)
65,0
47,0
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
177,0 - 202,0
kg 40 kg
65,0 - 90,0
60,0
60,0
72,0
45,0*
* Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-04
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Laminate: (Mixer tap available
White formica F7949 (NCS 0502Y) as accessory)
Designline 410-04 washbasin lift
White laminate
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
(Keramag Vitalis 121765)
Cable hand controls 70 80 72 417004-603
Remote control 70 80 72 417004-602
Laminate: (Mixer tap available
Oak formica K6149 as accessory)
Designline 410-04 washbasin lift
Oak laminate
- motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
(Keramag Vitalis 121765)
Cable hand controls 70 80 72 417004-653
Remote control 70 80 72 417004-652
Accessories
Cable Remote control
Mixer tap Hose pack Safety switch
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm. The safety switch halts the
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with descent of the basin if it
Spout projection 10.5 cm crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation Art. no.
425-101 425-301 White 425-401
www.granberg.se 3 425-302 Chrome/white
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-0
Neatly designed motorised washbasin lift, total depth 69 cm
Rounded installation panel in laminate. Choose white or oak
Ergonomically designed washbasin with handle to facilitate
positioning of wheelchair under washbasin
Open counter top behind washbasin
When the height is adjusted, the mirror and spotlight fitting move
with the basin
The water and drain hoses are elegantly concealed behind a casing
FUNCTION
DESIGNLINE 410-0 is a washbasin lift with motorised height adjustment.
It is supplied complete with an ergonomically designed washbasin with handle, mir-
ror and light fitting with three spotlights.
When the height is adjusted, the mirror and spotlight fitting move with the basin.
The water and drain hoses are concealed behind a casing.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The rounded installation panel is mounted on the lift unit.
drain. - The washbasin is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The mirror and spotlight fitting are mounted on the lift unit.
Plaster walls must be strengthened. - Mixer tap, water and drain hoses are installed.
- Check that the planned installation area is at least the same width as the
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The rounded installation panel is made of laminate.
Choose white or oak.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA 71,5
(110 V available) 31,0
59,0
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
177,0 - 202,0
kg 40 kg
57,0
65,0 - 90,0
57,0
69,0
45,0*
* Free space for water pipe and drain
Detailed installation instructions can be downloaded from www.granberg.se 4 www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-0
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Laminate: (Mixer tap available
White formica F7949 (NCS 0502Y) as accessory)
Designline 410-0 washbasin lift
White laminate
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
(Marlan Antaris 600)
Cable hand controls 70 80 69 417007-603
Remote control 70 80 69 417007-602
Laminate: (Mixer tap available
Oak formica K6149 as accessory)
Designline 410-0 washbasin lift
Oak laminate
- motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
(Marlan Antaris 600)
Cable hand controls 70 80 69 417007-653
Remote control 70 80 69 417007-652
Accessories
Cable Remote control
Mixer tap Hose pack
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm.
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with
Spout projection 10.5 cm crosscutting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation
425-101 425-301 White
www.granberg.se 425-302 Chrome/white
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-10
Neatly designed motorised washbasin lift with
bathroom cabinet beneath the washbasin
Rounded installation panel in white laminate.
Open counter top behind washbasin
When the height is adjusted, the mirror, bathroom cabinet and
light fitting move with the basin
The water and drain hoses are elegantly concealed behind a casing
FUNCTION
DESIGNLINE 410-10 is a washbasin lift with motorised height adjustment.
It is supplied complete with a washbasin, bathroom cabinet, mirror and light fitting
with three spotlights.
When the height is adjusted, the mirror, bathroom cabinet and spotlight fitting move
with the basin. The water and drain hoses are concealed behind a casing.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The rounded installation panel is mounted on the lift unit.
drain. - The bathroom cabinet is mounted on the lift unit.
- Check the condition of the wall (material, positioning of cross bars). - The washbasin is mounted on the lift unit.
Plaster walls must be strengthened. - The mirror and spotlight fitting are mounted on the lift unit.
- Check that the planned installation area is at least the same width as the - Mixer tap, water and drain hoses are installed.
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The rounded installation panel is made of white laminate.
The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA 31,0
(110 V available) 71,5
1,8 cm / sek.
25,0 cm
(65,0 - 90,0 cm)
177,0 - 202,0
kg 20 kg
65,0 - 90,0
5,5 - 30,5
45,0*
* Free space for water pipe and drain
74,5
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-10
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Laminate: (Mixer tap available
White formica F7949 (NCS 0502Y) as accessory)
Designline 410-10 washbasin lift
White laminate
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
- Bathroom cabinet
Cable hand controls 70 80 74.5 417010-603
Remote control 70 80 74.5 417010-602
Accessories
Cable Remote control
Mixer tap Hose pack
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm.
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with
Spout projection 10.5 cm crosscutting).
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation
425-101 425-301 White
www.granberg.se 425-302 Chrome/white
MOTORISED WASHBASIN LIFTS DESIGNLINE 410
Neatly designed motorised washbasin lift for mounting of any washbasin.
Total width 150 cm
Installation panel and bathroom cabinet in birch veneer
When the height is adjusted, the mirror, bathroom cabinet and spotlight
fitting move with the basin
FUNCTION
DESIGNLINE 410 is a washbasin lift with motorised height adjustment.
It is supplied with a bathroom cabinet, mirror and light fitting with three spotlights.
When the height is adjusted, the mirror, bathroom cabinet and spotlight fitting move
with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel and bathroom cabinet are mounted on the lift
drain. unit.
- Check the condition of the wall (material, positioning of cross bars). - The washbasin is mounted on the lift unit.
Plaster walls must be strengthened. - The mirror is mounted on the lift unit.
- Check that the planned installation area is at least the same width as the - Mixer tap, water and drain hoses are installed.
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The installation panel and bathroom cabinet are in birch veneer.
TECHNICAL SPECIFICATIONS
(cm)
230 V ~ 50 Hz 230 VA
(110 V available)
150,0
37,0
40,0 70,0 40,0
1,8 cm / sek.
80,0
25,0 cm
(65,0 - 90,0 cm)
174,0 - 199,0
kg 30 kg
28,0
65,0 - 90,0
51,5
35,5 79,0 35,5
14,0
46,0
Detailed installation instructions can be downloaded from www.granberg.se www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410
Width Planning Depth Art. no.
(cm) width (cm) (cm)
Designline 410 washbasin lift
incl. birch veneer bathroom cabinet
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
Cable hand controls 150 160 46 418000-093
Remote control 150 160 46 418000-092
Accessories
Cable Remote control
Hose pack Safety switch
hand controls
1 x drain hose, length 70 - 103 cm. The safety switch halts the
Diameter at connection 5 cm or 4 cm (with descent of the basin if it
crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Designation Art. no.
425-301 White 425-401
www.granberg.se 425-302 Chrome/white
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-04
Neatly designed motorised washbasin lift, total depth 74 cm,
total width 150 cm
Installation panel and bathroom cabinet in birch veneer
Ergonomically designed washbasin with shallow basin and long,
re-sited drain to prevent collision with the user’s legs
Open counter top behind washbasin
When the height is adjusted, the mirror, bathroom cabinet and
spotlight fitting move with the basin
FUNCTION
DESIGNLINE 410-04 is a washbasin lift with motorised height adjustment.
It is supplied complete with a bathroom cabinet, ergonomically designed washbasin,
mirror and light fitting with three spotlights.
When the height is adjusted, the mirror, bathroom cabinet and spotlight fitting move
with the basin.
Control:
The washbasin can be raised to the desired height simply by pushing a button.
(65 - 90 cm when installed at standard height).
Safety:
A safety switch is available as an accessory which stops the lift moving when it
touches the user’s legs.
PLANNING INSTALLATION
When planning, note the following points: - The lift unit is screwed to the wall.
- Beneath the lift, there is free space for installation of the water pipe and - The installation panel and bathroom cabinet are mounted on the lift
drain. unit.
- Check the condition of the wall (material, positioning of cross bars). - The washbasin is mounted on the lift unit.
Plaster walls must be strengthened. - The mirror is mounted on the lift unit.
- Check that the planned installation area is at least the same width as the - Mixer tap, water and drain hoses are installed.
’planning width’ in the table on the adjoining page.
- Check that there is sufficient space between the wall on which the wash-
basin is to be mounted and the underlying wall.
- The installation panel and bathroom cabinet are in birch veneer.
The washbasin is made of porcelain.
TECHNICAL SPECIFICATIONS
230 V ~ 50 Hz 230 VA
(cm)
(110 V available) 150,0
37,0
40,0 70,0 40,0
65,0
47,0
1,8 cm / sek.
80,0
25,0 cm
(65,0 - 90,0 cm)
174,0 - 199,0
kg 20 kg
28,0
65,0 - 90,0
51,5
60,0
35,5 79,0 35,5
14,0
46,0
74,0
Detailed installation instructions can be downloaded from www.granberg.se 30 www.granberg.se
MOTORISED WASHBASIN LIFTS DESIGNLINE 410-04
Width Planning Depth Art. no.
(cm) width (cm) (cm)
(Mixer tap available as accessory)
Designline 410-04 washbasin lift
incl. bathroom cabinet in birch veneer
- Motorised height adjustment
incl:
- Mirror and lighting (3 spotlights)
- Washbasin with overflow and trap cover/plug
Cable hand controls 150 160 74 418004-693
Remote control 150 160 74 418004-692
Accessories
Cable Remote control
Mixer tap Hose pack Safety switch
hand controls
FMM 9050-4500 1 x drain hose, length 70 - 103 cm. The safety switch halts the
Lever length 14.5 cm Diameter at connection 5 cm or 4 cm (with descent of the basin if it
Spout projection 10.5 cm crosscutting). comes into contact with an
object or the user’s legs.
2 x water hoses, length 80 cm,
R15 connection (1/2”).
Art. no. Art. no. Designation Art. no.
425-101 425-301 White 425-401
www.granberg.se 31 425-302 Chrome/white
SHOWER SYSTEM GLAN - END WALLS WITH FULL DEPTH
Shower system with full depth on end walls
Tray with integrated non-slip surface
Stable design with several reliable support handles Low entry (6.5 cm) Magnetic fasteners on
curtain prevent water
spray
Pre-mounted shower walls manufactured with
safety glass and homogeneous laminate
Hand-shower with gentle, pleasant spray
Quick to install / dismantle. Detachable front Dual function hair trap
Approximate time required is 45 minutes makes it is possible to prevents drain being
clean under the tray blocked with hair and dirt
Two vertical support 40 mm drain removes
handles provide safety 0.47 litres of water
/ sec. *
FUNCTION * Drain connection fulfils the requirements of the SS-EN274-1 standard. (A shower cabin shall remove 0.4 litres of water / sec.)
The GLAN shower system has a low entry height, several reli-
able support handles and plenty of space, enabling physically
disabled or elderly people to tend to their daily hygiene needs
in comfort.
PLANNING INSTALLATION
You will need the following information before placing your order: - The drain pipe is connected to the existing floor drain.
- Measure the width and depth of the space where the shower is to be located. - The level of the shower tray is adjusted with the aid of 6 adjustable feet.
- Select the correct width and depth in the table on the adjoining page. (Rear feet can be adjusted through the tray).
- Should the existing mixer be replaced? - The pre-mounted walls are fitted to the tray and connected together. (All
- The shower system is suitable for mixers with c/c 15 - 16 cm. fitting is done from inside the shower).
- Is a ramp required? - The mixer tap is mounted and connected via hoses.
- Is a shower stool required? - The curtain with magnetic fasteners is fitted.
TECHNICAL SPECIFICATIONS
120,0 / 140,0
(cm)
69,0 / 80,0
203,5
100,5
6,5
Detailed installation instructions can be downloaded from www.granberg.se 3 www.granberg.se
SHOWER SYSTEM GLAN - END WALLS WITH FULL DEPTH
Width Depth of Depth of Art. no.
(cm) tray (cm) end walls
(cm)
The shower system pictured has additional fittings
Glan shower system
- end walls with full depth
Tray 69 cm deep
End walls 69 cm deep
120 69 69 5702-12076
140 69 69 5702-14076
Glan shower system
- end walls with full depth
Tray 80 cm deep
End walls 80 cm deep
120 80 80 5702-12086
140 80 80 5702-14086
The shower system pictured has additional fittings
Glan shower system
- end walls with full depth
- rear curtain
Tray 69 cm deep
End walls 69 cm deep
120 69 69 5703-12076
140 69 69 5703-14076
Glan shower system
- end walls with full depth
- rear curtain
Tray 80 cm deep
End walls 80 cm deep
120 80 80 5703-12086
140 80 80 5703-14086
www.granberg.se 33
SHOWER SYSTEM GLAN SHOWER SYSTEM - SHORTER END WALLS
Shower system with shorter end walls
In a cramped bathroom, shorter end walls provide
space for a washbasin, for example. There is no
need to move the washbasin and the space in the Low entry (6.5 cm) Magnetic fasteners on
curtain prevent water
shower remains intact spray
Tray with integrated non-slip surface
Stable design with several reliable support handles
Pre-mounted shower walls manufactured with Detachable front Dual function hair trap
safety glass and homogeneous laminate makes it is possible to prevents drain being
clean under the tray blocked with hair and dirt
Hand-shower with gentle, pleasant spray
Quick to install / dismantle.
Approximate time required is 45 minutes
Two vertical support 40 mm drain removes
handles provide safety 0.47 litres of water
/ sec. *
FUNCTION * Drain connection fulfils the requirements of the SS-EN274-1 standard. (A shower cabin shall remove 0.4 litres of water / sec.)
The GLAN shower system has a low entry height, several reliable support
handles and plenty of space, enabling physically disabled or elderly
people to tend to their daily hygiene needs in comfort.
In a bathroom where the existing bath is to be replaced with a shower
system, the washbasin is often located close to the edge of the bath. A
shower system with shorter end walls provides room for the washbasin
while the space in the shower remains unobstructed.
PLANNING INSTALLATION
You will need the following information before placing your order: - The drain pipe is connected to the existing floor drain.
- Measure the width and depth of the space where the shower is to be located. - The level of the shower tray is adjusted with the aid of 6 adjustable feet.
- Select the correct width and depth in the table on the adjoining page. (Rear feet can be adjusted through the tray).
- Should the existing mixer be replaced? - The pre-mounted walls are fitted to the tray and connected together. (All
- The shower system is suitable for mixers with c/c 15 - 16 cm. fitting is done from inside the shower).
- Is a ramp required? - The mixer tap is mounted and connected via hoses.
- Is a shower stool required? - The curtain with magnetic fasteners is fitted.
TECHNICAL SPECIFICATIONS
120,0 / 140,0
(cm)
60,0 / 69,0
203,5
100,5
6,5
69,0 / 80,0
Detailed installation instructions can be downloaded from www.granberg.se 34 www.granberg.se
SHOWER SYSTEM GLAN SHOWER SYSTEM - SHORTER END WALLS
Width Depth of Depth of Art. no.
(cm) tray (cm) end walls
(cm)
The shower system pictured has additional fittings
Glan shower system
- shorter end walls
Tray 69 cm deep
End walls 60 cm deep
120 69 60 5712-12076
140 69 60 5712-14076
Glan shower system
- shorter end walls
Tray 80 cm deep
End walls 69 cm deep
120 80 69 5712-12087
140 80 69 5712-14087
The shower system pictured has additional fittings
Glan shower system
- shorter end walls
- rear curtain
Tray 69 cm deep
End walls 60 cm deep
120 69 60 5713-12076
140 69 60 5713-14076
Glan shower system
- shorter end walls
- rear curtain
Tray 80 cm deep
End walls 69 cm deep
120 80 69 5713-12087
140 80 69 5713-14087
www.granberg.se 3
SHOWER SYSTEM GLAN - FREE-STANDING
No entry height
Free-standing shower which protects the room’s walls from water
spray
If the floor is not protected against moisture, a shower system with a Magnetic fasteners on
curtain prevent water
soft base can be chosen. The shower base protects the floor from water spray
spray. The edge is soft and gives way when a shower chair is rolled into
the shower
Stable design with several reliable support handles
Pre-mounted shower walls manufactured with safety glass and homo- Two vertical support
geneous laminate handles provide safety
Hand-shower with gentle, pleasant spray
Quick to install / dismantle.
Approximate time required is 30 minutes
FUNCTION
GLAN free-standing shower walls are placed on the floor to protect the
room’s walls from water spray. Wheelchair users can simply roll into the
shower.
If the floor is not protected against moisture, a shower system with a soft
base can be chosen. The shower base protects the floor from water spray.
The edge is soft and gives way when a shower chair is rolled into the
shower.
PLANNING INSTALLATION
You will need the following information before placing your order: - Possible soft shower base connected to existing floor drain.
- Is the floor protected against moisture and does it have the correct - The pre-mounted walls are connected together.
slope? If not, select a model with a soft shower base. (All fitting is done from inside the shower).
- Measure the width and depth of the space where the shower is to be located. - The shower walls are adjusted with the aid of 4 adjustable feet.
- Select the correct width and depth in the table on the adjoining page. - The mixer tap is mounted and connected via hoses.
- Should the existing mixer be replaced? - The curtain with magnetic fasteners is fitted.
- The shower system is suitable for mixers with c/c 15 - 16 cm.
- Is a shower stool required?
TECHNICAL SPECIFICATIONS
(cm)
120,0 / 140,0 69,0 / 80,0
199,0
96,0
Detailed installation instructions can be downloaded from www.granberg.se 3 www.granberg.se
SHOWER SYSTEM GLAN - FREE-STANDING
Width (cm) Depth of end Art. no.
walls (cm)
The shower system pictured has additional fittings
Glan shower system
- free-standing
End walls 69 cm deep
120 69 5704-12076
140 69 5704-14076
Glan shower system
- free-standing
End walls 80 cm deep
120 80 5704-12086
140 80 5704-14086
The shower system pictured has additional fittings
Glan shower system
- free-standing with soft shower base
End walls 69 cm deep
120 69 5705-12076
140 69 5705-14076
Glan shower system
- free-standing with soft shower base
End walls 80 cm deep
120 80 5705-12086
140 80 5705-14086
www.granberg.se 3
ACCESSORIES
Width Depth Height Art. no.
(cm) (cm) (cm)
Opening window
Can be located on the back or end wall.
(Only fits 80 cm deep end wall).
4 mm safety glass
64 90 5850-1001
Support handle with adjustable strap
Only fits 80 cm deep shower
5851-1001
Thermostatic mixer
FMM 10-00
The mixer is equipped with wings for ease of
movement:
Chromium-plated, c/c 16 cm
5853-1002
Thermostatic mixer
MORA RH 100.S.A
The mixer is equipped with levers (length 7.5 cm) for water
flow and temperature control.
Chromium-plated, c/c 16 cm
5853-1003
Shampoo rack
The rack is suspended from the mixer tap and fixed with
suction cups.
Height, 44 cm, 3 levels,
Colour, alu design
25 10 44 5854-1001
Shower stool with adjustable legs
Adjustable 45 - 55 cm
40 cm in diameter
Max. user weight 130 kg
5855-1002
3 www.granberg.se
ACCESSORIES
Width Depth Height Art. no.
(cm) (cm) (cm)
Ramp
Used to enable wheelchair users to roll into the shower.
Placed on the floor and fixed in place with self-adhesive
fasteners.
75 71 7 5858-1003
Step
Used to make entry into the shower easier.
It is placed on the floor and fixed in place with self-adhesive
fasteners.
51 51 3.5 5858-1005
Towel rack
Placed free-standing on the floor or inside the shower.
Colour, alu design
90 54 83 5859-1001
Towel lift
Bracket screwed to the ceiling, towel lift is lowered when
shower not in use.
Colour, white
100 50 5859-1002
Waist-height curtain incl. fasteners
Used when assistant helps with showering.
120 100 5860-1001
140 100 5860-1002
Mixer connections
R 15 utv M26 x 1.5
(Sold in pairs) 5870-1001
Flexible water hoses
2 x connection hoses 150 cm / hose
(Sold in pairs) 5871-1001
www.granberg.se 3
Granberg reserves the right to make changes to the design and style of its product.
Colour deviations from the catalogue may occur.
Granberg reserves the right to alter its product range.
Design and production of the catalogue: Granberg Interior AB
40 www.granberg.se
Issue 2 - 1 February 2008
Local dealer:
Granberg Interior AB
Box 6112 • SE-600 06 Norrköping • Sweden
Tel: +46 (0)11-19 77 50 • Fax: +46 (0)11-12 76 76
E-mail: info@granberg.se • Website: www.granberg.se