planner Use this tool Send

Document Sample
planner Use this tool Send Powered By Docstoc
					                                               Use this tool   Send to SmartCAM
Description     Type     Diameter    RPM IPM
1/4 End Mill   Endmill       0.25    2000 20
3/8 End Mill   Endmill      0.375    1800 18
1/2 End Mill   Endmill         0.5   1500 10
1/4 Drill      Drill         0.25    4000  8
1/2 Drill      Drill           0.5   2500  7
1/4 End Mill   Endmill       0.25    2345 21
3/8 End Mill   Endmill      0.375    1845 15
1/2 End Mill   Endmill         0.5   1545 11
1/4 Drill      Drill         0.25    4045 12
1/2 Drill      Drill           0.5   2545 13
1/4 End Mill   Endmill       0.25    2012 23
3/8 End Mill   Endmill      0.375    1812 14
1/2 End Mill   Endmill         0.5   1512  8
1/4 Drill      Drill         0.25    4012 12
1/2 Drill      Drill           0.5   2512  6
                                               Use this tool        Send to SmartCAM
Description      Type    Diameter    RPM IPM
1/4 End Mill   Endmill       0.25    6767 65
3/8 End Mill   Endmill      0.375    7676 56
1/2 End Mill   Endmill         0.5   8787 76
1/4 Drill      Drill         0.25    7878 67
1/2 Drill      Drill           0.5   6868 87
1/4 End Mill   Endmill       0.25    8686 78
3/8 End Mill   Endmill      0.375    7575 64
1/2 End Mill   Endmill         0.5   5757 46                   Pick the tab for the material you’ll be cutting.
1/4 Drill      Drill          0.25 9797   73                   Click on the first tool you’ll want to put in the Plann
1/2 Drill      Drill           0.5 7979   37                   Press ‘Use this tool’. Note that the Tool Number sho
1/4 End Mill Endmill          0.25 6789   46                   Continue picking tools in this manner. Again note th
3/8 End Mill Endmill        0.375 9876    64                   Press ‘Send to SmartCAM’. Open the Planner to ins
1/2 End Mill Endmill           0.5 7698   55
1/4 Drill      Drill          0.25 8967   66                   Notes:
1/2 Drill      Drill           0.5 9870   77                   This is for milling applications.
                                                               The tools are placed into the Planner in the order tha
                                                               This uses Sheet1 to store the temporary results prior
                                                               Sheet1 and the right column (F) of the material sheet
                                                               This uses the C:\test\ directory to write the macro to.
                                                               This assumes C:\sm9\system\ffm.exe for the applica
                                                               If you have problems with the application starting ch
                                                               If you make copies of the sheets (to add other materi
 material you’ll be cutting.
 ol you’ll want to put in the Planner (any cell on the row).
 ’. Note that the Tool Number shows up in the right column).
ools in this manner. Again note the tool numbers.
 rtCAM’. Open the Planner to inspect.


applications.
d into the Planner in the order that they are selected.
  store the temporary results prior to sending to SmartCAM.
 t column (F) of the material sheets are cleared out prior to firing off SmartCAM.
 t\ directory to write the macro to. Create one, or change the VBA code to suit.
m9\system\ffm.exe for the application and run directory. Change to suit.
ms with the application starting check your [Paths] section of your <app>.ini file for relative paths and make them absolute (i.e. c
 of the sheets (to add other materials for example) be sure to add code to the bottom of the CommandButton1_Click sub (just bef
hs and make them absolute (i.e. change “pmill=..\MILL\” to pmill=c:\sm9\mill\” without the quotes).
mandButton1_Click sub (just before the shell) to clear the ‘F’ column of tools numbers. This will need added to all material she
will need added to all material sheets.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:7
posted:10/23/2011
language:English
pages:5