IBM: IBM BNT RackSwitch G8000R
RRP
$6,190
Description:
Is a Top of Rack (TOR) Switch that has 44x 1GbE RJ45 ports, 4 x 1GbE SFP ports and up to 4x optional SFP+ or CX4 ports
load-sharing internal power modules as standard. The G8000R has rear to front air flow (note if
front to rear air flow is required order the G8000F); stackable
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
Also available as DC powered switch (IBM Model No. G8000DC, part No. 7309CD8)
IBM Code: Weight: Height: Depth:
446013 5.45Kg 1RU 38.1 cm
Ports: 44 x auto-sensing 10/100/1000 RJ45
4 x 1G SFP Ports
Two port expansion slots for uplink modules (see below)
- Dual Port 10GbE SFP+ Module
1 x DB-9 for Management (Mini-USB to DB-9 serial cable included)
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
176 Gbps (full duplex) switching architecture
Latency: average port latency 4.6 microseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling
Power: The AC-Powered G8000 has dual load-sharing internal power modules, operating at
50-60Hz, 100-240 VAC auto switching per module.
Generic Rack Mount Kit (2-post) comes as standard
G8000 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat dissipation: 520 BTU/hour
Mean time between failure (MTBF): 195,000 hrs with ambient operating temperatu
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 ye
Security:
802.1x with VLAN assignment
Private VLAN edge
RADIUS
TACACS+
Wire Speed Filtering
Flexible ACL combinations - L2-L4 criteria: Source and Destination MAC, IP, TCP/UDP
SSH v1, v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (Password Recovery/ Factory Default)
VLANs:
Port-based VLAN
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
802.1x with Dynamic VLAN assignment
Private VLAN Edge
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Cross Stack Trunks
Trunk Hashing support (RTAG 7)
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Quality of service (QoS):
QoS 802.1p
DSCP
Weighted round-robin
Metering
4 MB buffers for queuing
Routing protocols:
128 static routes
Layer 2/3 static routes
RIP v1/v2
OSPF v2/v3
BGP
IPv6
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Layer 2 failover
Multicast: IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
Virtual switch stacking with up to six switches
Management features:
Clients:
BLADEHarmony Manager (optional)
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
SNMP v1, v2c, v3
RMON
Secondary NTP support
Accept DHCP
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM RackSwitch 10Gb Dual-Port SFP+ Uplink Module
IBM RackSwitch 10Gb Dual-Port CX4 Uplink Module
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
orts and up to 4x optional SFP+ or CX4 ports, dual
front air flow (note if
Front view of IBM BNT RackSwitch G8000
Rear view of IBM BNT RackSwitch G8000
IBM Part No. 39Y7924
IBM BNT G8000 Switch
haring internal power modules, operating at 120W,
5,000 hrs with ambient operating temperature of 40ºC MTBF
iding entitlement to upgrades over the 3 year period
a: Source and Destination MAC, IP, TCP/UDP Ports
ith 2 K IGMP groups
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3417
IBM Part No. 46C3421
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM: IBM BNT RackSwitch G8000F
RRP
$6,190
Description:
Is a Top of Rack (TOR) Switch that has 44x 1GbE RJ45 ports, 4 x 1GbE SFP ports and up to 4x optional SFP+ or CX4 ports
load-sharing internal power modules as standard. The G8000R has rear to front air flow (note if
rear to front air flow is required order the G8000R); stackable
IBM Code: Weight: Height: Depth:
7309CFC 5.45Kg 1RU 38.1 cm
Ports: 44 x auto-sensing 10/100/1000 RJ45
4 x 1G SFP Ports
Two port expansion slots for uplink modules (see below)
- Dual Port 10GbE SFP+ Module
1 x DB-9 for Management (Mini-USB to DB-9 serial cable included)
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
176 Gbps (full duplex) switching architecture
Latency: average port latency 4.6 microseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Front-to-rear cooling
Power: The AC-Powered G8000 has dual load-sharing internal power modules, operating at
50-60Hz, 100-240 VAC auto switching per module.
Generic Rack Mount Kit (2-post) comes as standard
G8000 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat dissipation: 520 BTU/hour
Mean time between failure (MTBF): 195,000 hrs with ambient operating temperatu
Software Specifications: include a 3-year software license, providing entitlement to upgrades over that per
Security:
802.1x with VLAN assignment
Private VLAN edge
RADIUS
TACACS+
Wire Speed Filtering
Flexible ACL combinations - L2-L4 criteria: Source and Destination MAC, IP, TCP/UDP
SSH v1, v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (Password Recovery/ Factory Default)
VLANs:
Port-based VLAN
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
802.1x with Dynamic VLAN assignment
Private VLAN Edge
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Cross Stack Trunks
Trunk Hashing support (RTAG 7)
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Quality of service (QoS):
QoS 802.1p
DSCP
Weighted round-robin
Metering
4 MB buffers for queuing
Routing protocols:
128 static routes
Layer 2/3 static routes
RIP v1/v2
OSPF v2/v3
BGP
IPv6
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Layer 2 failover
Multicast: IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
Virtual switch stacking with up to six switches
Management features:
Clients:
BLADEHarmony Manager (optional)
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
SNMP v1, v2c, v3
RMON
Secondary NTP support
Accept DHCP
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM RackSwitch 10Gb Dual-Port SFP+ Uplink Module
IBM RackSwitch 10Gb Dual-Port CX4 Uplink Module
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
orts and up to 4x optional SFP+ or CX4 ports, dual
front air flow (note if
Front of Switch
IBM Part No. 39Y7924
Rear of Switch
haring internal power modules, operating at 120W, IBM BNT G8000 Switch
5,000 hrs with ambient operating temperature of 40ºC MTBF
iding entitlement to upgrades over that period
a: Source and Destination MAC, IP, TCP/UDP Ports
ith 2 K IGMP groups
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3417
IBM Part No. 46C3421
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM: IBM BNT RackSwitch G8052R
RRP
$10,454
Description:
A high performance Top of Rack (TOR) Switch that has 48x 1GbE RJ45 Ports, 4 x 10GbE SFP+ Ports with dual hot-swapp
power suppies and fans as standard. It is designed with line-rate and low latency of 1.7 microseconds. A single switch A
The G8052 has rich layer 2/3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines
through-out the network, making it VM-aware. A single switch ASIC design, reduces latency and power,
The G8052R has rear to front air flow, this can maintain hot and cold aisles in required (note if front to rear air flow is r
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
IBM Code: Weight: Height: Depth:
7309G52 5.45Kg 1RU 44.5cm
Ports: 48 x auto-sensing 10/100/1000 RJ45
4 x 10G SFP+ Ports
1 x USB port for external storage devices
1 x RS232 serial console port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
176 Gbps (full duplex) switching architecture
Latency: average port latency 1.7 microseconds
Dimensions: 17.3” wide, 17.5” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8052 has dual load-sharing internal power modules, operating
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8052 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Cable Management: Intuitive LEDs for port identification and cable management
Server-like port orientations enables short and simple cabling
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
LDAP
802.1x with VLAN assignment
Private VLAN edge
RADIUS
TACACS+
Wire speed filtering
Flexible ACL combinations – L2-L4 criteria: source and destination MAC, IP, TCP/UD
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
802.1x with Dynamic VLAN assignment
Private VLAN Edge
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Cross Stack Trunks
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Quality of service (QoS):
QoS 802.1p
DSCP
Weighted round-robin
Metering
4 MB buffers for queuing
Routing protocols:
128 static routes
Layer 2/3 static routes
RIP v1/v2
OSPF v2/v3
BGP
IPv6
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Layer 2 failover
Multicast: IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Netboot
Standard protocols:
The standard protocols are:
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
LLDP
32 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
4 x 10GbE SFP+ Ports with dual hot-swappable redundant
ency of 1.7 microseconds. A single switch ASIC design, with low power draw.
ring and managing virtual machines
educes latency and power,
n required (note if front to rear air flow is required order the G8052F)
Front view of the IBM BNT Rac
serial cable included
IBM Part No. 39Y7924
Rear view of the IBM BNT Rac
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules, operating at 130W,
er module. The nominal power is approximately 120W
IBM BNT RackSwitch G
iding entitlement to upgrades over the 3 year period
ia: source and destination MAC, IP, TCP/UDP ports
ith 2 K IGMP groups
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
Front view of the IBM BNT RackSwitch G8052
Rear view of the IBM BNT RackSwitch G8052
IBM BNT RackSwitch G8052
IBM: IBM BNT RackSwitch G8052F
RRP
$10,454
Description:
A high performance Top of Rack (TOR) Switch that has 48x 1GbE RJ45 Ports, 4 x 10GbE SFP+ Ports with dual hot-swapp
power suppies and fans as standard. It is designed with line-rate and low latency of 1.7 microseconds. A single switch A
The G8052 has rich layer 2/3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines
through-out the network, making it VM-aware. A single switch ASIC design, reduces latency and power,
The G8052F has front to rear air flow, this can maintain hot and cold aisles in required (note if rear to front air flow is re
IBM Code: Weight: Height: Depth:
730952F 5.45Kg 1RU 44.5cm
Ports: 48 x auto-sensing 10/100/1000 RJ45
4 x 10G SFP+ Ports
1 x USB port for external storage devices
1 x RS232 serial console port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
176 Gbps (full duplex) switching architecture
Latency: average port latency 1.7 microseconds
Dimensions: 17.3” wide, 17.5” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Front to rear cooling; redundant hot-swappable field replaceable fans with vaiiable sp
Power: The AC-Powered G8052 has dual load-sharing internal power modules, operating
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8052 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Cable Management: Intuitive LEDs for port identification and cable management
Server-like port orientations enables short and simple cabling
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
LDAP
802.1x with VLAN assignment
Private VLAN edge
RADIUS
TACACS+
Wire speed filtering
Flexible ACL combinations – L2-L4 criteria: source and destination MAC, IP, TCP/UD
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
802.1x with Dynamic VLAN assignment
Private VLAN Edge
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Cross Stack Trunks
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Quality of service (QoS):
QoS 802.1p
DSCP
Weighted round-robin
Metering
4 MB buffers for queuing
Routing protocols:
128 static routes
Layer 2/3 static routes
RIP v1/v2
OSPF v2/v3
BGP
IPv6
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Layer 2 failover
Multicast: IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Netboot
Standard protocols:
The standard protocols are:
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
LLDP
32 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
4 x 10GbE SFP+ Ports with dual hot-swappable redundant
ency of 1.7 microseconds. A single switch ASIC design, with low power draw.
ring and managing virtual machines
educes latency and power, Front view of the IBM BNT Rac
n required (note if rear to front air flow is required order the G8052R)
serial cable included
IBM Part No. 39Y7924 Rear view of the IBM BNT Rac
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules, operating at 130W,
er module. The nominal power is approximately 120W IBM BNT RackSwitch G
iding entitlement to upgrades over the 3 year period
ia: source and destination MAC, IP, TCP/UDP ports
ith 2 K IGMP groups
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
Front view of the IBM BNT RackSwitch G8052
Rear view of the IBM BNT RackSwitch G8052
IBM BNT RackSwitch G8052
IBM: IBM BNT RackSwitch G8124R
RRP
$13,254
Description:
A high performance Top of Rack (TOR) Switch that has 24 x 10GbE SFP+ Ports with dual load-sharing internal power mo
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
It delivers exceptional performance that is both lossless with low latency of less than 700 nanoseconds. A single switch
The G8124R has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8124 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8124R has rear to front air flow, this can maintain hot and cold aisles in required (note if front to rear air flow is r
Also available as DC powered switch (IBM Model No. G8124DC, part No. 7309BD5)
IBM Code: Weight: Height: Depth:
446017 6.40 kg 1RU 38.1 cm
Ports: 24 x 10G SFP+ Ports
2 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance
480 Gbps non-blocking (full duplex) switching architecture
Latency: average port latency less than 700 nanoseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8124 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
The nominal power ranges from 115w to168w depandant upon port type.
MTBF: 189,060 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8124 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1100 BTU/hour maximum
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
s with dual load-sharing internal power modules as standard. power suppies and fans as standard.
ess than 700 nanoseconds. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G or 10G, or both.
n required (note if front to rear air flow is required order the G8124F)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 120W
o168w depandant upon port type.
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM BNT RackSwitch G8124
IBM: IBM BNT RackSwitch G8124F
RRP
$13,254
Description:
A high performance Top of Rack (TOR) Switch that has 24 x 10GbE SFP+ Ports with dual load-sharing internal power mo
Front to Rear airflow – ideal for IBM iPlex or when needing ports in the front
It delivers exceptional performance that is both lossless with low latency of less than 700 nanoseconds. A single switch
The G8124R has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8124 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8124F has front to rear air flow, this can maintain hot and cold aisles in required (note if rear to front air flow is re
IBM Code: Weight: Height: Depth:
7309BF5 6.40 kg 1RU 38.1 cm
Ports: 24 x 10G SFP+ Ports
2 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
480 Gbps non-blocking (full duplex) switching architecture
Latency: average port latency less than 700 nanoseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8124 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
The nominal power ranges from 115w to168w depandant upon port type.
MTBF: 189,060 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8124 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1100 BTU/hour maximum
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
s with dual load-sharing internal power modules as standard.
ess than 700 nanoseconds. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G or 10G, or both.
n required (note if rear to front air flow is required order the G8124R)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 120W
o168w depandant upon port type.
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM BNT RackSwitch G8124
IBM: IBM BNT RackSwitch G8124E-R (Enhanced Model)
RRP
$13,254
Description:
A high performance Top of Rack (TOR) Switch that has 24 x 10GbE SFP+ Ports with dual load-sharing internal power mo
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
It delivers exceptional performance that is both lossless with low latency of less than 700 nanoseconds. A single switch
The G8124R has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8124 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8124R has rear to front air flow, this can maintain hot and cold aisles in required (note if front to rear air flow is r
IBM Code: Weight: Height: Depth:
7309BR6 6.40 kg 1RU 38.1 cm
Ports: 24 x 10G SFP+ Ports
2 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
480 Gbps non-blocking (full duplex) switching architecture
Latency: average port latency less than 700 nanoseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8124 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
The nominal power ranges from 115w to168w depandant upon port type.
MTBF: 189,060 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8124 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1100 BTU/hour maximum
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
s with dual load-sharing internal power modules as standard.
ess than 700 nanoseconds. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G or 10G, or both.
n required (note if front to rear air flow is required order the G8124F)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 120W
o168w depandant upon port type.
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM BNT RackSwitch G8124
IBM: IBM BNT RackSwitch G8124E-F (Enhanced Model)
RRP
$13,254
Description:
A high performance Top of Rack (TOR) Switch that has 24 x 10GbE SFP+ Ports with dual load-sharing internal power mo
Front to Rear airflow – ideal for IBM iPlex or when needing ports in the front
It delivers exceptional performance that is both lossless with low latency of less than 700 nanoseconds. A single switch
The G8124R has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8124 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8124F has front to rear air flow, this can maintain hot and cold aisles in required (note if rear to front air flow is re
IBM Code: Weight: Height: Depth:
7309BF5 6.40 kg 1RU 38.1 cm
Ports: 24 x 10G SFP+ Ports
2 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: Full Line rate performance, non-blocking
480 Gbps non-blocking (full duplex) switching architecture
Latency: average port latency less than 700 nanoseconds
Dimensions: 17.3” wide, 15” deep, 1 RU high
Weight: 5.45 kg (11.99 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8124 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
The nominal power ranges from 115w to168w depandant upon port type.
MTBF: 189,060 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8124 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1100 BTU/hour maximum
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
16 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
s with dual load-sharing internal power modules as standard.
ess than 700 nanoseconds. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G or 10G, or both.
n required (note if rear to front air flow is required order the G8124R)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 120W
o168w depandant upon port type.
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y4284
IBM BNT RackSwitch G8124
IBM: IBM BNT RackSwitch G8264R
RRP
$31,254
Description:
The G8264 Top of Rack (TOR) Switch offers exceptional performance. As standard it has 48 x 10GbE SFP+ Ports and 4 x
with dual hot-swappable redundant power suppies and fans as standard.
The 4 x 40Gb ports can also be split into an additional 16 x 10GbE ports to create upto 64 10GbE ports if required.
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
It delivers exceptional performance that is both lossless with low latency of less than 1 microsecond. A single switch AS
The G8264 has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8264 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8264R has rear to front air flow, this can maintain hot and cold aisles in required (note if front to rear air flow is r
IBM Code: Weight: Height: Depth:
7309G64 9.98 kg 1RU 48mm
Ports: 48 x 10G SFP+ Ports
4 x QSFP+ Ports
1 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: 100% Line rate performance, non-blocking
1.28 Terrabit non-blocking (full duplex) switching architecture
Latency: Sub 1.1 microseconds latency
Dimensions: 17.3” wide, 19” deep, 1 RU high
Weight: 9.98 kg (22 lb)
Airflow: Rear-to-front cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8264 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
MTBF: 1865,990 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8264 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1127 BTU/hour maximum
LEDs System LEDs to indicate status, fan and power
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering: Allow and Deny
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
128 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
40Gb Options:
IBM BNT QSFP+ Transceiver
1m IBM QSFT+ DAC Breakout Cable
3m IBM QSFP+ DAC Breakout Cable
5m IBM QSFP+ DAC Breakout Cable
1m IBM QSFT+ to QSFP+ Cable
3m IBM QSFT+ to QSFP+ Cable
10m IBM QSFT+ to QSFP+ Cable
30m IBM QSFT+ to QSFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
ndard it has 48 x 10GbE SFP+ Ports and 4 x 40 GbE ports
eate upto 64 10GbE ports if required.
ess than 1 microsecond. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G,10G, or 40G.
n required (note if front to rear air flow is required order the G8264F)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 275w
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y7884
IBM Part No. 48Y7886
IBM Part No. 49Y7887
IBM Part No. 49Y7888
IBM Part No. 49Y7890
IBM Part No. 49Y7891
IBM Part No. 90Y3519
IBM Part No. 90Y3521
IBM Part No. 49Y4284
IBM BNT RackSwitch G8264
Rear View of IBM BNT RackSwitch G8264
IBM: IBM BNT RackSwitch G8264F
RRP
$31,254
Description:
The G8264 Top of Rack (TOR) Switch offers exceptional performance. As standard it has 48 x 10GbE SFP+ Ports and 4 x
with dual hot-swappable redundant power suppies and fans as standard.
The 4 x 40Gb ports can also be split into an additional 16 x 10GbE ports to create upto 64 10GbE ports if required.
Rear-to-Front airflow – ideal for servers or blade chassis with ports in back of rack
It delivers exceptional performance that is both lossless with low latency of less than 1 microsecond. A single switch AS
The G8264 has enterprise class layer 2 and layer 3 functionality and ease of management
VM-Ready is switch-resident software that reduce the complexity of configuring and managing virtual machines throug
Virtual Fabric allows clients to carve-up a dual-port 10G adapter into 8 virtual NICs (vNICs) and create virtual pipes betw
for optimal performance, plus higher availability and better security.
The G8264 also supports Converged Enhanced Ethernet (CEE/FCoE) and iSCSI. This switch can handle bot of these proto
Active MultiPath (AMP) effectively doubles bandwidth by allowing uplinks to be active/active.
The G8264F has rfront to rear air flow, this can maintain hot and cold aisles in required (note if rear to front air flow is r
IBM Code: Weight: Height: Depth:
730964F 9.98 kg 1RU 48mm
Ports: 48 x 10G SFP+ Ports
4 x QSFP+ Ports
1 x 10/100/1000 Ethernet RJ45 ports for Management
1 x USB port for external storage devices
1 x mini-USB Console Port: 1 x Mini-USB to DB-9 serial cable included
Power Cords: 2x Power Cords included, Australia AC plug 10A/250 V
Note: Need to be ordered with the switch (no additional cost)
Specifications: 100% Line rate performance, non-blocking
1.28 Terrabit non-blocking (full duplex) switching architecture
Latency: Sub 1.1 microseconds latency
Dimensions: 17.3” wide, 19” deep, 1 RU high
Weight: 9.98 kg (22 lb)
Airflow: Front to Rear cooling; redundant hot-swappable field replaceable fans with vaiiable s
Power: The AC-Powered G8264 has dual load-sharing internal power modules,
50-60Hz, 100-240 VAC auto switching per module. The nominal power is approxim
MTBF: 1865,990 hours @ 40ºC
Generic Rack Mount Kit (2-post) comes as standard
Optional versitile 4-post mounting options available
G8264 switches can be mounted vertically or horizontally
LEDs System LEDs to indicate status
Stacking LEDs to indicate master/member
Environmental specifications are:
Temperature: ambient operating: 0ºC to +40ºC
Relative humidity: non-condensing, operating 10 to 90%
Altitude: operating 3,050 m (10,000 feet)
Acoustic noise: less than 65 dB
Heat Dissipation: 1127 BTU/hour maximum
LEDs System LEDs to indicate status, fan and power
Stacking LEDs to indicate master/member
Software Specifications: include a 3-year software license, providing entitlement to upgrades over the 3 y
Security:
RADIUS
TACACS+
Wire speed filtering: Allow and Deny
SSH v1 and v2
HTTPS Secure BBI
MAC address move notification
SCP
Shift B Boot menu (password recovery/factory default)
VLANs
Port-based VLANs
4096 VLAN IDs supported
1024 Active VLANs (802.1Q)
Private VLAN Edge
FCoE/Lossless Ethernet
802.1 Data Center Bridging
Priority-based Flow Control (PFC)
Enhanced Transmission Selection (ETS)
Data Center Bridge Exchange protocol (DCBX)
FIP Snooping
Fibre Channel over Ethernet (FCoE)
Converged Enhanced Ethernet (CEE)
Trunking:
LACP
Static Trunks (EtherChannel)
Configurable Trunk Hash algorithm
Spanning Tree:
Multiple Spanning Tree (802.1s)
Rapid Spanning Tree (802.1w)
Fast Uplink Convergence
PVRST+
Fast Uplink Convergence
BPDU guard
Quality of service (QoS):
QoS 802.1p (priority queues)
DSCP remarking
Metering
Routing protocols:
RIP v1/v2
OSPF v2/v3
BGP
High availability:
Uplink failure detection
Hot links
Virtual Router Redundancy support (VRRP)
Active Multipath™
Multicast:
IGMP v1, v2, v3 Snooping with 2 K IGMP groups
Protocol Independent Multicast (PIM sparse mode/dense mode)
Monitoring:
Port mirroring
ACL-based mirroring
Sflow Version 5
Virtualization:
VMready VI API support
vNIC MIB support for SNMP management features
Netboot
Management features:
Clients:
BLADEHarmony Manager
isCLI (Cisco-like)
Browser-based client, SSH, or Telnet
Standard protocols:
The standard protocols are:
IPV6
SNMP v1, v2c and v3
RMON
Secondary NTP support
Accept DHCP
DHCP Relay
LLDP
128 K MAC table
9 K jumbo frames
802.3X flow control
Upgrades:
The upgrades are:
Upgrade firmware via serial or TFTP
Dual software images
Transceivers and Cables: 1Gb Options:
IBM BNT SFP RJ45 Transceiver
IBM BNT SFP SX Transceiver
IBM BNT SFP LX Transceiver
IBM BNT SFP ZX Transceiver
10Gb Options:
IBM BNT SFP+ SR Transceiver
IBM BNT SFP+ LR Transceiver
IBM BNT SFP+ ER Transceiver
1 m IBM Passive DAC SFP+ Cable
3 m IBM Passive DAC SFP+ Cable
5 m IBM Passive DAC SFP+ Cable
8.5 m IBM Passive DAC SFP+ Cable
40Gb Options:
IBM BNT QSFP+ Transceiver
1m IBM QSFT+ DAC Breakout Cable
3m IBM QSFP+ DAC Breakout Cable
5m IBM QSFP+ DAC Breakout Cable
1m IBM QSFT+ to QSFP+ Cable
3m IBM QSFT+ to QSFP+ Cable
10m IBM QSFT+ to QSFP+ Cable
30m IBM QSFT+ to QSFP+ Cable
Miscellaneous options: IBM BNT 19" Flexible 4 Post Rail Kit
ndard it has 48 x 10GbE SFP+ Ports and 4 x 40 GbE ports
eate upto 64 10GbE ports if required.
ess than 1 microsecond. A single switch ASIC design, with extremely low power draw.
ring and managing virtual machines through-out the network, making it VM-aware.
l NICs (vNICs) and create virtual pipes between the adapter and switch
I. This switch can handle bot of these protocols and connect upstream at 1G,10G, or 40G.
n required (note if rear to front air flow is required order the G8264R)
IBM Part No. 39Y7924
pable field replaceable fans with vaiiable speed to reduce power draw
haring internal power modules,
er module. The nominal power is approximately 275w
iding entitlement to upgrades over the 3 year period
parse mode/dense mode)
IBM Part No. 81Y1618
IBM Part No. 81Y1622
IBM Part No. 90Y9424
IBM Part No. 90Y9418
IBM Part No. 46C3447
IBM Part No. 90Y9412
IBM Part No. 90Y9415
IBM Part No. 90Y9427
IBM Part No. 90Y9430
IBM Part No. 90Y9433
IBM Part No. 90Y9436
IBM Part No. 49Y7884
IBM Part No. 48Y7886
IBM Part No. 49Y7887
IBM Part No. 49Y7888
IBM Part No. 49Y7890
IBM Part No. 49Y7891
IBM Part No. 90Y3519
IBM Part No. 90Y3521
IBM Part No. 49Y4284
IBM BNT RackSwitch G8264
Rear View of IBM BNT RackSwitch G8264
IBM: IBM BNT 1Gb SFP RJ45 Transceiver
RRP
$399
Description:
Is a 1Gb SFP RJ45 (Copper) Transceiver. The maximum distance for connectivity is 100 metres (including the horizontal
IBM Code: Weight: Height: Depth:
81Y1618 N/A N/A N/A
Transceiver: 1 x auto-sensing 10/100/1000 RJ45
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
tivity is 100 metres (including the horizontal link and the patch cords)
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 1Gb SFP SX Transceiver
RRP
$290
Description:
Is a 1Gb SFP SX Transceiver. The maximum distance for supported connectivity is 220 meters using 62.5µm multimode
and upto 550 meters with 50 µm multi-mode fibre.
IBM Code: Weight: Height: Depth:
81Y1622 N/A N/A N/A
Transceiver: 1 x 1Gb SFP Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ivity is 220 meters using 62.5µm multimode fibre,
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 10Gb SFP+ LR Transceiver
RRP
$1,635
Description:
Is a 10Gb SFP+ LR Transceiver. The maximum distance for supported connectivity is 10 Kilometres using 9 µm singlemo
IBM Code: Weight: Height: Depth:
90Y9412 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ectivity is 10 Kilometres using 9 µm singlemode fibre,
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 10Gb SFP+ SR Transceiver
RRP
$680.91
Description:
Is a 10Gb SFP+ SR Transceiver. The maximum distance for supported connectivity is 300 metres, using OM3 or OM4 50
IBM Code: Weight: Height: Depth:
46C3447 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ectivity is 300 metres, using OM3 or OM4 50 µm multimode fibre.
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 10Gb SFP+ ER Transceiver
RRP
$4,999.09
Description:
Is a 10Gb SFP+ ER Transceiver. The maximum distance for supported connectivity is 40 Kilometres using 9 µm singlemo
IBM Code: Weight: Height: Depth:
46C3447 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ectivity is 40 Kilometres using 9 µm singlemode fibre.
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 1Gb SFP ZX Transceiver
RRP
$1,362.73
Description:
Is a 1Gb SFP ZX Transceiver. The maximum distance for supported connectivity is 80 Kilometres using 9 µm singlemode
IBM Code: Weight: Height: Depth:
90Y9418 N/A N/A N/A
Transceiver: 1 x 1Gb SFP Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ivity is 80 Kilometres using 9 µm singlemode fibre.
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: IBM BNT 1Gb SFP LX Transceiver
RRP
$499.09
Description:
Is a 1Gb SFP LX Transceiver. The maximum distance for supported connectivity is 10 Kilometres using 9 µm singlemode
IBM Code: Weight: Height: Depth:
90Y9424 N/A N/A N/A
Transceiver: 1 x 1Gb SFP Transceiver (LC-connector type)
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
ivity is 10 Kilometres using 9 µm singlemode fibre.
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: 1 metre IBM Passive DAC SFP+ Cable
RRP
$153.64
Description:
Is a 1 metre Direct Attached Copper (DAC) Cable capable of supporting 10Gb connectivity
For use connecting Servers to IBM BNT Top of Rack Switches.
IBM Code: Weight: Height: Depth:
90Y9427 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ DAC (Copper) Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: 3 metre IBM Passive DAC SFP+ Cable
RRP
$180.91
Description:
Is a 3 metre Direct Attached Copper (DAC) Cable capable of supporting 10Gb connectivity
For use connecting Servers to IBM BNT Top of Rack Switches.
IBM Code: Weight: Height: Depth:
90Y9430 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ DAC (Copper) Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: 5 metre IBM Passive DAC SFP+ Cable
RRP
$271.82
Description:
Is a 5 metre Direct Attached Copper (DAC) Cable capable of supporting 10Gb connectivity
For use connecting Servers to IBM BNT Top of Rack Switches.
IBM Code: Weight: Height: Depth:
90Y9433 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ DAC (Copper) Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124DC,G8264R, G8264F
24R, G8124F, G8124DC,G8264R, G8264F
IBM: 8.5 metre IBM Passive DAC SFP+ Cable
RRP
$362.73
Description:
Is a 8.5 metre Direct Attached Copper (DAC) Cable capable of supporting 10Gb connectivity
For use connecting Servers to IBM BNT Top of Rack Switches.
IBM Code: Weight: Height: Depth:
90Y9436 N/A N/A N/A
Transceiver: 1 x 10Gb SFP+ DAC (Copper) Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8000R, G8000F, G8000DC,G8052R, G8052F, G8124R, G8124F, G8124-ER, G8124-EF, G8124DC
24R, G8124F, G8124-ER, G8124-EF, G8124DC,G8264R, G8264F
IBM: 10 metre IBM QSFP+ MTP Optical Cable
RRP
$180.91
Description:
Is a 10 metre QSFP+ Optical Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
90Y3519 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ MTP Optical Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 30 metre IBM QSFP+ MTP Optical Cable
RRP
$317.27
Description:
Is a 30 metre QSFP+ Optical Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
90Y3521 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ MTP Optical Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 1 metre IBM QSFP+ DAC Break Out Cable
RRP
$540.63
Description:
Is a 1 metre QSFP+ DAC Breakout Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7886 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Direct Attached Copper (DAC) Breakout Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 3 metre IBM QSFP+ DAC Break Out Cable
RRP
$953.64
Description:
Is a 3 metre QSFP+ DAC Breakout Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7887 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Direct Attached Copper (DAC) Breakout Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 5 metre IBM QSFP+ DAC Break Out Cable
RRP
$1,217.71
Description:
Is a 5 metre QSFP+ DAC Breakout Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7888 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Direct Attached Copper (DAC) Breakout Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 1 metre IBM QSFP+ to QSFP+ Cable
RRP
$540.63
Description:
Is a 1 metre QSFP+ to QSFP+ Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7890 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Direct Attached Copper (DAC) Breakout Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: 3 metre IBM QSFP+ to QSFP+ Cable
RRP
$953.64
Description:
Is a 3 metre QSFP+ to QSFP+ Cable capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7891 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Direct Attached Copper (DAC) Breakout Cable
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F
IBM: IBM QSFP+ SR Transceiver
RRP
$3,017.27
Description:
Is a QSFP+ Short Range (SR) Transceiver capable of supporting 40Gb connectivity
For use connecting IBM BNT Top of Rack Switches to IBM BNT Top of Rack Switches @ 40 Gb.
IBM Code: Weight: Height: Depth:
49Y7884 N/A N/A N/A
Transceiver: 1 x 40Gb QSFP+ Transceiver
Specifications: For use in the following IBM BNT RackSwitch products
G8264R and G8264F