Loop Power, Velocity 4-20 mA Output
RN-LP222 Series Vibration Sensor, with Top Exit Integral Cable
RN-LP222 RN-M/LP222
Performance Specifications English Metric
Output 4-20 mA 4-20 mA
Measurement Range Select Parameters Below Select Parameters Below
Electrical
Settling Time (Turn on Time)
@ Room Temp (68°F/20°C) 108 ohm >108 ohm
Environmental
Temperature Range -40 to 185° F -40 to 85° C
Electromagnetic Sensitivity Pending Pending
Sealing Welded, Hermetic Welded, Hermetic
Submersible Depth 100 ft. 30.5 m
Physical
Sensing Element PZT Ceramic PZT Ceramic
Sensing Structure Shear Mode Shear Mode
Weight (without cable) 3.2 oz. 90 grams
Case Material 316L Stainless Steel 316L Stainless Steel
Mounting 1/4-28 Tapped Hole 1/4-28 Tapped Hole
Connector Integral Cable Integral Cable
Integral Cabling CB103, Blunt Cut CB103, Blunt Cut
Mechanical
Mounting Torque 2 to 5 ft. lbs. 2,7 to 6,8 Nm
Supplied Accessories
Mounting Hardware 1/4-28 Stud M6x1 Adapter Stud
Calibration Certificate Current Output Current Output
@ 100 Hz @ 100 Hz
How To Order - Select the desired parameters using the selection guide.
Example Part Number: RN-LP222-2P1/010-Z (Supplied with 1/4-28 Stud)
Example Metric Part Number: RN-M/LP222-2P1/010-Z (Supplied with M6x1 Adapter Stud)
SEC Part Number: RN-LP222 - / -
Measurement Range Range Type Frequency Range +/-3dB Cable Length Connector
0 = 0-0.5 IPS (0-12,7 mm/sec) R = RMS 1 = 600-60,000 CPM (10-1000 Hz) 010 = 10 ft. (3,05 m) F = BNC Plug
1 = 0-1 IPS (0-25,4 mm/sec) P = Peak 2 = 180-150,000 CPM (3-2500 Hz) 030 = 30 ft. (9,14 m) Z = Blunt Cut
2 = 0-2 IPS (0-50,8 mm/sec) 050 = 50 ft. (15,24 m)
3 = 0-.4 IPS (0-10 mm/sec) 100 = 100 ft. (30,48 m)
4 = 0-.8 IPS (0-20 mm/sec)
Optional Mounting Accessories
RN-MH117-3A / RN-MH117-3B Accelerometer Installation Tool Kit
RN-MH130-1A Adhesive Mounting Pad
SEC of America, Inc. i 110A Pine Street i Shallotte, NC 28470
Phone: 910-754-3220 i Fax: 910-754-3238