Corner Reflector Antenna by liaoqinmei


									Corner Reflector Antenna
2.3 – 2.6 GHz

The most important thing we build is trust.

The CRA Series high frequency Corner Reflector Antennas
are useful for many applications including surveillance
work, 802.11 WiFi and other high frequency applications. Its
unique design features allow the antenna to overcome many of
the problems normally associated with higher frequency

These corner reflectors utilize a half-wavelength element
configuration. A unique balun fed design provides high efficiency
radiation without skewing of the radiation pattern.
The resultant performance provides excellent bandwidth,
gain and match over the frequency range.

The connector mechanism exits at the rear of the antenna,
allowing easy installation. The mounting bracket
(supplied) allows both horizontal and vertical mounting of                         9 dBi Mini Corner Reflector
the antenna.
                                                                      Corner Reflector Antenna
The 9 dBi Mini-Corner Reflector has 3" x 3" panels (76
mm x 76 mm), with a total front face of only 3" x 5.5" (76            •    9 dBi Gain
mm x140 mm).                                                          •    Small aperture; minimizes wind loading
The reflectors are made of aluminum, and weather                      •    Split balun feed provides superior
                                                                           bandwidth and gain performance
protected with a tough white powder-coat finish. The
radiating elements are weather protected within an ABS
radome. This maintains integrity of the antenna without
sacrificing looks or wind loading

 Frequency:                      2300 - 2600 MHz WiFI         Max Wind Velocity:         125 mph, (200 kph)
 Gain:                           9 dBi                        Operating Temp:            -40º to +85º C
 Bandwidth @ 2:1 SWR             300 MHz                      Material:                  Powder-coated aluminum
 Impedance:                      50 Ohm nominal                                          ABS radome
 Max Power:                      100 Watts                    Weight:                    <1 lbs (0.5 kg)
 Beamwidth:                      75º El, 65º Az               Pole Mounting:             Hardware included
 Front-to-Back Ratio:            22 dB or better              Mounting Dimensions:       Mounts up to 2” (51 mm)
 Lighting Protection:            External recommended                                    diameter mast
 Series Aperture:                3” x 5.5” (76 mm x 140 mm)   Connector:                 N female attached at rear
 Panel Size:                     3” x 3” ea (76 mm x 76 mm)                              of antenna

Specifications subject to change without prior notice
Typical values shown unless min or max is specified
100-DS0296X1        03/16/09      1 of 2

Corner Reflector Antenna
2.3 – 2.6 GHz

Specifications subject to change without prior notice   1916 Palomar Oaks Way, Suite 100 Carlsbad, CA 92008
Typical values shown unless min or max is specified     Tel. (760) 496-0055
100-DS0296X1        03/16/09      2 of 2                Fax. (760) 496-0057          GMS PRODUCTS


To top